17200.pdf

FBOP TECHNICAL DESIGN GUIDELINES ISSUE DATE: DECEMBER 10, 2004

SENSITIVE - LOU

CLOSED CIRCUIT TELEVISION SYSTEM 17200-1

SECTION 17200 - CLOSED CIRCUIT TELEVISION SYSTEM

PART 1 - GENERAL

1.1

SUMMARY

A.

This section covers the closed circuit television system as shown on the drawings or as required to support the systems defined in these specifications. The work under this section consists of furnishing materials and equipment, performing labor and services necessary for the installation of the closed circuit television system required for the security electronics, communications, and fire alarm system.

B.

Related Work Specified Elsewhere: Refer to all other Division 17 specification sections and drawings, and to the specifications and drawings under the General Construction Contract to ascertain the extent of work included.

1.2

SUBMITTALS

A.

Since the Division 17 systems must be reviewed by the Contracting Officer as a system, no individual, specific submittal shall be made for this section.

Submittals shall be packaged in groups and shall be made in accordance with the General Provisions (Section 17000) of these specifications.

B.

When making the submittal as required by Section 17000, include this additional information.

1.

Sample of a mini-dome camera, Type A, Mount One, with an auto-iris, varifocal (8 mm to 15 mm) lens.

1.3

SYSTEM DESCRIPTION:

A.

The closed circuit television system shall monitor spaces as shown on the drawings and function as shown on the CCTV functional schematic.

B.

Video shall be switched to selected monitors via the control panel/touch screen intercom select switches, and the CCTV controller. Video switching system shall be a microprocessor based switcher.

C.

A looped through video output shall be provided on the video switching system for each video input. The outputs shall be recorded by the Digital Video Recording System (DVRS).

CLOSED CIRCUIT TELEVISION SYSTEM 17200-2

D.

As shown on the plans, there shall be video monitors associated with CCTV controllers. These monitors will be used for high priority general surveillance by the Correctional staff. The video that is displayed on these monitors shall also be recorded by the DVRS.

E.

The Security Monitoring and Control System shall initiate switching signals to the video switcher. This command shall be generated on the following conditions:

1.

An intercom station viewed by a CCTV camera calls the Control Station.

The command shall be generated upon acknowledgment of the intercom call by the Control Station.

2.

When the Control Station calls an intercom station which is viewed by a

CCTV camera. The command shall be generated upon the Control Station initiating the call.

3.

When the Control Station selects the direct select switch for a general surveillance camera.

F.

Video signals from buildings other than the Outside Administration Building shall be transmitted to the headend equipment via fiber optic modules and associated fiber optic cable. Signals from the CCTV camera to the Fiber Optic Module (FOM) shall be via coaxial cable. Mini-coaxial cable shall interconnect the FOM video signals at the Outside Administration Building with the video matrix switch. (FCI, USP only)

G.

Contractor shall develop the control signals to effect the functional switching requirements defined in these specifications or referenced drawings.

H.

All CCTV cameras shall be equipped with auto-iris lenses with spot filters.

I.

All CCTV components shall be color or color compatible.

J.

See Section 17900 for Closed Circuit Television System UPS power requirements.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-3

PART 2 - PRODUCTS

2.1

CCTV EQUIPMENT DESCRIPTION:

A.

Mini Camera - Type A.1. Camera shall be compact with the following features:

a.

Sony CCD 1/3" high resolution color DSP camera.

b.

Picture elements: 768H X 494V minimum.

c.

Horizontal resolution 480 lines minimum.

d.

Automatic backlight compensation.

e.

Automatic gain control.

f.

Minimum illumination 2.0 lux at F1.2 with a 1/60 second shutter speed.

g.

Video output: 1.0 V p-p composite adjustable.

h.

Output impedance: 75 ohms.

i.

Lens mounting: Auto-iris varifocal (2.5 mm to 5.6 mm), auto-iris varifocal (4 mm to 8 mm), auto-iris varifocal (8 mm to 15 mm), auto-iris varifocal (5 mm to 50 mm).

j.

Power line phase locking with 180 deg. vertical phase adjustment.

k.

S/N ratio of greater than 50dB.

l.

Temperature operating range of -40 deg. C to +50 deg. C.

m.

Humidity operating range of 0 to 95% relative humidity.

n.

Power requirements: Less than 5 watts.

o.

Voltage requirements: 24 VAC. Unit shall be provided with an isolation transformer as required to allow multiple units to be powered from one power source in the equipment room. Unit shall be protected by fuse or circuit breaker.

2.

Mounts shall be provided as follows:

a.

High impact dome mount. Mount - 1.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-4

1) Shall accommodate auto-iris varifocal (2.5 mm to 5.6 mm), auto-iris varifocal (4 mm to 8 mm), auto-iris varifocal (8 mm to 15 mm).

2) Shall be conical shape to prevent persons from hanging on the unit or from hiding contraband on top of the unit.

3) Aluminum housing with an silver anodized finish.

4) Weather tight.

5) Polycarbonate, optically correct dome.

6) Camera must be capable of being adjusted 160 degrees horizontally to achieve the intended view.

7) Outdoor units shall have a clear dome. Indoor units shall have a smoked dome.

8) Equipped with a custom sun and frozen rain shield when not protected from the sun and frozen rain by the building structure.

9) The mount shall be the EX49 by Extreme CCTV or approved equal.

b.

High impact corridor mount. Mount - 2.

1) Shall accommodate auto-iris varifocal (2.5 mm to 5.6 mm), auto-iris varifocal (4 mm to 8 mm), auto-iris varifocal (8 mm to 15 mm), auto-iris varifocal (8 mm to 50 mm).

2) Shall be rounded to prevent persons from hiding contraband on top of the unit.

3) Steel housing with a paintable finish. If installed on a painted wall, paint housing to match wall.

4) Weather tight.

5) Polycarbonate viewing window.

6) The mount shall be the EX7 by Extreme CCTV or approved equal.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-5

7) Equipped with a custom sun and frozen rain shield when not protected from the sun and frozen rain by the building structure.

3.

Options shall be provided as follows:

a.

Wall Pendant Attachment. Option - W.

1) Shall be compatible with and made of the same materials and finish as the dome mount. The attachment shall allow the dome mount to be wall or pole mounted indoors or outdoors.

2) The wall pendant attachment shall be the EXMB by

Extreme CCTV or approved equal.

b.

Ceiling Pendant Attachment. Option - C.

1) Shall be constructed as shown on the Plan Details. The attachment shall allow the dome or corridor mount to be mounted below typical obstructions in the cameras field of view.

2) The ceiling pendant attachment shall be custom fabricated or an approved equal.

c.

CCTV Pole. Option - P.

1) The CCTV pole shall be a round tapered aluminum pole having a satin ground finish with a nominal height of 3000 mm and shall be configured as shown on the drawings.

2) Pole shall be designed for a 36 meters/second wind load with the installed loads and effective projected area.

3) Enclosures shall be custom fabricated and installed at the base and top of the pole as shown on the drawings.

4) Pole foundation shall be as shown on the drawings.

5) Pole shall be as manufactured by Hapco, GE, or manufacturer approved by the Contracting Officer.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-6

d.

CCTV Tower. Option - T.

1) The CCTV tower shall be 8300 mm free-standing, constructed of galvanized steel, and equipped with a base plate, top plate, and a 3000 mm anti-climb shield.

2) The tower foundation shall be as shown on the drawings.

3) The tower shall be Rohn Model 25G series or approved equal.

4.

Lenses shall be provided as follows:

a.

Fixed Lenses: All fixed lenses shall be auto-iris, minimum f1.2 for narrow to mid-range FOV and f1.6 for wide FOV, with spot filter unless otherwise specified. Wide angle lenses shall be asymmetrical for distortion correction. Lenses shall be available in 2.5mm, 2.9mm, 3.6mm, 6.0mm, 8.0mm, 12mm, 16mm, and 25mm focal lengths.

b.

Variable Focal Lenses: All variable focal lenses shall be auto-iris, minimum f1.4, with spot filter unless otherwise specified. Focal length shall be adjustable from 2,5-5.6 mm, 4-8 mm, 8-15 mm, and 5-50 mm. Lenses shall be standard micro-lenses instead of CS-mounted lenses. The 5-50 mm lens may be CS-mounted, if required.

B.

Pan/Tilt/Zoom Camera System - Type B.

1.

The system shall include a compact high speed unit with an integral receiver, drive unit, camera, and lens. The camera shall have the following characteristics:

a.

1/4 inch CCD color.

b.

Picture Elements: Minimum 768H x 494V picture elements.

c.

Sensitivity: 0.2 lux with f/1.6 lens.

d.

Resolution: More than 470 TV lines.

e.

Automatic gain control.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-7

f.

Signal to noise: More than 50dB g.

Automatic white balance.

h.

Power requirements: Less than 5 watts.

2.

The drive unit shall have the following features:

a.

Adjustable speed pan and tilt:

1) Variable from 1 to 300 deg/sec pan.

2) Variable from 1 to 110 deg/sec tilt.

b.

360 degree continuous rotation.

c.

Shall be compatible with the matrix switcher and controller.

3.

Zoom lens shall be provided as follows:

a.

Aperture: At least f/1.4.

b.

Focal Length: 4 to 88 mm (22X) minimum.

c.

Zoom Speed: Telephoto to Wide in 3.9 sec.

d.

Autoiris.

e.

Autofocus in less than 1.8 seconds.

4.

Heaters and Blowers shall be provided on outdoor cameras.

a Heaters and Blowers shall create an operating temperature range of

-40 deg. C to +60 deg. C and an operating humidity range of 0 to 100% relative humidity.

5.

Mounts shall be provided as follows:

a.

Flush Ceiling Mount. Mount - 1.

1) Polycarbonate, optically correct dome.

2) Outdoor unit shall have a clear dome. Indoor unit shall have a smoked dome.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-8

b.

Pendent Wall Mount. Mount - 2.

1) Polycarbonate, optically correct dome.

2) Outdoor unit shall have a clear dome. Indoor unit shall have a smoked dome.

3) Steel housing with a paintable finish.

4) Outdoor unit shall be weather tight.

c.

Pendent Ceiling Mount. Mount - 3.

1) Polycarbonate, optically correct dome.

2) Outdoor unit shall have a clear dome. Indoor unit shall have a smoked dome.

3) Steel housing with a paintable finish.

4) Outdoor unit shall be weather tight.

d.

Parapet Mount. Mount - 4.

1) Polycarbonate, optically correct dome.

2) Outdoor unit shall have a clear dome. Indoor unit shall have a smoked dome.

3) Steel housing with a paintable finish.

4) Shall be weather tight.

5) Mounting arm shall have a load rating of 18kg minimum.

6) Mounting arm shall be designed to allow equipment to be swiveled in toward the roof for maintenance access.

7) Mounting arm shall be compatible with the pan tilt zoom camera system.

8) Mounting arm shall be the V5UPM by Vicon or approved equal

6.

Options shall be provided as follows:

CLOSED CIRCUIT TELEVISION SYSTEM 17200-9

a.

CCTV Pole. Option - P.

1) The CCTV pole shall be a round tapered aluminum pole having a satin ground finish with a nominal height of 3000 mm and shall be configured as shown on the drawings.

2) Pole shall be designed for a 36 meters/second wind load with the installed loads and effective projected area.

3) Enclosures shall be custom fabricated and installed at the base and top of the pole as shown on the drawings.

b.

CCTV Tower. Option - T.

1) The CCTV tower shall be 8300 mm free-standing, constructed of galvanized steel, and equipped with a base plate, top plate, and a 3000 mm anti-climb shield.

2) The tower foundation shall be as shown on the drawings.

3) The tower shall be Rohn Model 25G series or approved equal.

7.

The Pan/Tilt/Zoom camera system shall be the Surveyor 2000 by Vicon or approved equal.

C.

Fiber Optic Modules : (FCI, USP only)

1.

Video Transmitter: Unit shall be capable of transmitting video over fiber optic cable. Unit shall have the following features: (FCI, USP only) a.

Video Bandwidth: 5 Hz - 10 MHz. (FCI, USP only) b.

Differential Gain: <5%. (FCI, USP only) c.

Signal-Noise: 60dB. (FCI, USP only) d.

Video Input: 1V p-p. (FCI, USP only) e.

Wavelength: 850nm. (FCI, USP only)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-10

f.

Optical Power Budget: 14 dB minimum. (FCI, USP only) g.

Power: 24 VAC @ 5W. (FCI, USP only) h.

Shall be compatible with the fiber optic cable specified in Section

17120. (FCI, USP only) i.

Unit shall be as manufactured by International Fiber Systems Inc.

(IFS) model VT1000 or other product approved by Contracting Officer. (FCI, USP only) j.

Lifetime warranty.

2.

Video Receiver: Unit shall be capable of receiving video over fiber optic cable. Unit shall be card cage rack mounted where installed at the video switcher location and have the following features: (FCI, USP only) a.

Video Bandwidth: 5 Hz - 10 MHz. (FCI, USP only) b.

Differential Gain: <5%. (FCI, USP only) c.

Signal-Noise: 60dB. (FCI, USP only) d.

Video Output: 1V p-p with AGC. (FCI, USP only) e.

Wavelength: 850nm. (FCI, USP only) f.

Loss Budget: 14 dB minimum. (FCI, USP only) g.

Operating Temp: -20 deg C to 70 deg C. (FCI, USP only) h.

Power: 24 VAC @ 5W. (FCI, USP only) i.

Shall be compatible with the fiber optic cable specified in Section

17120. (FCI, USP only) j.

Automatic gain control. (FCI, USP only) k.

Unit shall be as manufactured by International Fiber Systems Inc.

(IFS) model VR1100 or VR1100-R3, or other product approved by Contracting Officer. (FCI, USP only) l.

Lifetime warranty.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-11

3.

Video Transmitter/Data Receiver: Unit shall be capable of transmitting video and receiving RS-422 data for pan/tilt/zoom control over fiber optic cable at the remote camera locations. Unit shall have the following features: (FCI, USP only) a.

Video Bandwidth: 5 Hz - 10 MHz. (FCI, USP only) b.

Differential Gain: <5%. (FCI, USP only) c.

Signal-Noise: 60dB. (FCI, USP only) d.

Video Input: 1V p-p. (FCI, USP only) e.

Wavelength: 850nm & 1300nm. (FCI, USP only) f.

Loss Budget: 14 dB minimum. (FCI, USP only) g.

Data Compatibility: RS-232, RS-422, TTL, & Manchester. (FCI, USP only) h.

Data Rate: DC-100Kbaud. (FCI, USP only) i.

Operating Temp: -20 deg C to 70 deg C. (FCI, USP only) j.

Power: 24 VAC @ 5W. (FCI, USP only) k.

Shall transmit/receive video and data over a single fiber optic conductor. (FCI, USP only) l.

Shall be compatible with the fiber optic cable specified in Section

17120. (FCI, USP only) m.

Unit shall be as manufactured by International Fiber Systems Inc.

(IFS) model VT1500WDM, or other product approved by Contracting Officer. (FCI, USP only) n.

Lifetime warranty.

4.

Video Receiver/Data Transmitter: Unit shall be capable of receiving video and transmitting RS-422 data for pan/tilt/zoom control over fiber optic cable at the switcher location. Unit shall be card cage rack mounted and have the following features: (FCI, USP only)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-12

a.

Video Bandwidth: 5 Hz - 10 MHz. (FCI, USP only) b.

Differential Gain: <5%. (FCI, USP only) c.

Signal-Noise: 60dB. (FCI, USP only) d.

Video Output: 1V p-p with AGC. (FCI, USP only) e.

Wavelength: 850nm & 1300nm. (FCI, USP only) f.

Loss Budget: 14 dB minimum. (FCI, USP only) g.

Data Compatibility: RS-232, RS-422, TTL, & Manchester. (FCI, USP only) h.

Data Rate: DC-100Kbaud. (FCI, USP only) i.

Operating Temp: -20 deg C to 70 deg C. (FCI, USP only) j.

Power: 24 VAC @ 5W. (FCI, USP only) k.

Shall transmit/receive video and data over a single fiber optic conductor. (FCI, USP only) l.

Shall be compatible with the fiber optic cable specified in Section

17120. (FCI, USP only) m.

Unit shall be as manufactured by International Fiber Systems Inc.

(IFS) model VR1500WDM-R3, or other product approved by Contracting Officer. (FCI, USP only)

n. Lifetime warranty.

1.

Data Transceiver: Unit shall be capable of transmitting multiplexed RS-

485 data for the CCTV keyboards over fiber optic cable. Unit shall have the following features: (FCI, USP only) a.

Shall be compatible with the CCTV controller and CCTV keyboard. (FCI, USP only) b.

Data to 200 Kbps. (FCI, USP only) c.

Tx, Rx Status Indicators. (FCI, USP only)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-13

d.

Operates at 850 nm or 1300 nm and compatible with the fiber optic cable specified. (FCI, USP only) e.

Optical power budget of 14dB using 62.5/125 fiber optic cable.

(FCI, USP only) f.

Shall transmit/receive data over a single fiber optic cable. (FCI, USP only) g.

Operating Temperature: -40 deg C to +70 deg C (-40 deg F to 158 deg F). (FCI, USP only) h.

Operating Relative Humidity: 20% to 95% non-condensing. (FCI, USP only) i.

Input Voltage: 11-14 VDC. (FCI, USP only) j.

Lifetime Warranty. (FCI, USP only) k.

Shall be International Fiber Systems D-1300 series or approved equal. (FCI, USP only)

D.

Video switching and control system shall be a microprocessor based control unit.

The switching system shall be configured as shown in the "CCTV FUNCTIONAL SCHEMATIC". Vicon VPS series microprocessor based switching system or other product approved by Contracting Officer. The following system components with support equipments and software shall be integrated into operational and functional video control systems.

1.

Video switching control units shall be Vicon Matrix 66 Series, or other product with internal CPU, cards and software as required for the functions described and for the camera/monitor configuration approved by Contracting Officer. Custom software shall be provided if necessary.

2.

Call-up video switching shall be effected via the RS-232 or RS- 422 communications link from the PLC to the video switcher.

3.

Date, time, and camera identification shall be effected by use of a Vicon

V1300 TDC/TDT series equipment or approved equal.

4.

Video controller shall provide manual camera to monitor selection, sequencing set-up, and pan/tilt/zoom control. The operator interface shall

CLOSED CIRCUIT TELEVISION SYSTEM 17200-14

be rack mounted as shown on the plans. Unit shall be Vicon 1300 series controller, or approved equal.

5.

CCTV programming terminal keyboard shall be installed in a rack mounted pullout keyboard tray.

6.

The video switching system shall be capable of 50% spare camera inputs and shall be provided with hardware for minimum 10 spare camera inputs.

The video switching system shall be provided with hardware for 4 spare monitor outputs. The unit shall have loop through video outputs.

E.

Video Monitor: High resolution, 9 inch color video monitor with the following characteristics or features:

1.

Accept composite video 1 V p-p.2. Impedance: 75 ohms.

3.

Horizontal Resolution: In excess of 280 lines at center.

4.

Geometric Distortion: Less than 3%.

5.

Video feed-thru connectors.

6.

Power consumption less than 75 watts.

7.

Temperature: Operate within specifications over ambient temperature range of 0 deg to 40 deg C.

8.

Shall be console mounted.

9.

Finish on panel mount shall be painted custom finish as selected by

Contracting Officer.

10.

Unit shall be Vicon VM6092 series, or other make approved by

Contracting Officer.

F.

Overhead Monitor Brackets: (USP only)

1.

Overhead Monitor Brackets shall be steel construction to support up to 40

lb. and shall be adjustable in height and width to accommodate the required monitor dimensions. Overhead Monitor Brackets shall be as manufactured by Winsted or approved equal. (USP only)

G.

CCTV Video Cable

CLOSED CIRCUIT TELEVISION SYSTEM 17200-15

1.

Standard Coaxial video cables shall have a solid copper center conductor and a braided copper shield providing a minimum 95% coverage.

2.

Mini-coaxial video cables shall have a stranded copper center conductor and a braided copper shield providing a minimum 89% coverage.

3.

Nominal attenuation at 10 MHz shall not exceed:

a.

7.2 dB/100 m for mini-type cables.

b.

3.5 dB/100m for RG-59/U-type cables.

c.

2.5 dB/100 m for RG-6/U-type cables.

d.

1.8 dB/100 m for RG-11/U-type cables.

4.

Nominal impedance shall be 75 ohms.

5.

Nominal dc resistance shall not exceed the following:

a.

98 ohms/km for mini-type cables.

b.

35 ohms/km for 59/U-type cables.

c.

26 ohms/km for 6/U-type cables.

d.

9 ohms/km for 11/U-type cables.

6.

Cable runs shall not exceed manufacturer's recommendations and shall not exceed:

a.

5 m for mini-type cables.

b.

120 m for RG-59/U-type cables.

c.

160 m for RG-6/U-type cables.

d.

250 m for RG-11/U-type cables.

7.

All cables installed in exterior conduits shall be moisture proof, gel filled direct burial type cable.

8.

All cable shall be terminated with BNC type connectors.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-16

9.

Contractor shall have option of using two cables (one power, one video) or a single cable suitable for combined use.

H.

Video Amplifier: (USP only)

1.

The video amplifier shall have the following features: (USP only) a.

Gain Range: Unity to +6 dB. (USP only) b.

Output Level: 1 V p-p (into 75 ohms). (USP only) c.

Outputs: 1 loop out from input signal; 4 amplified outputs. (USP only) d.

Freq Response: 10Hz to 10MHz. (USP only) e.

Noise: Less than -75dB (below 1 V p-p). (USP only) f.

Connector Type: BNC. (USP only) g.

Power Requirements: 60mA@24Vdc. (USP only) h.

The amplifier shall be Radio Design Lab FP-VDA4 or approved equal. (USP only)

2.

If the outputs are not source-terminated, prove 75 ohm terminations for all unused outputs. (USP only)

I.

Miscellaneous Hardware:

1.

Furnish and install miscellaneous hardware and materials as required to effect a complete and functional system.

PART 3 - EXECUTION

3.1

INSTALLATION

A.

All equipment shall be installed in keeping with the written recommendations of the manufacturer.

B.

All equipment shall be utilized for the purpose to which it was designed and manufactured.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-17

C.

All CCTV cameras shall be installed at the approximate locations shown on the drawings. Field adjustments shall be made as required to provide or improve the field of view of the area to be monitored. For cameras monitoring doors, the top of the field of view shall be the top of the door.

D.

Power supplies shall be furnished and installed for all equipment as required and supplies shall have performance characteristics compatible with the unique requirements of the equipment being supplied. Power supplies shall be loaded to a maximum of 80% of the rated power output. The power circuit to each camera shall be individually fused. Power supply shall be Class 2 listed.

E.

Amplifiers, combiners, remote switchers, power supplies, fiber optic multiplexers, and other support equipment shall be installed in panels designated as "SCC" which shall be furnished and installed under this section of work. (FCI, USP only)

F.

Amplifiers, combiners, remote switchers, power supplies, and other support equipment shall be installed in panels designated as "SCC" which shall be furnished and installed under this section of work. (FDC only)

G.

Verify, prior to installation of ceiling mounted enclosures, that field of view of camera is not obstructed by light fixtures or breaks in the ceiling height. If such conflicts occur, coordinate with Contracting Officer prior to installation.

H.

Precautions shall be taken to ensure that MATV cable is not used for CCTV applications.

I.

Check dimension of all camera housing assemblies to ensure that the camera, lens, mounting brackets, and heaters & blowers (where required) and any other required components will fit in the housing. The contractor shall be responsible for any costs associated with installing or re-stocking any camera system components and purchasing and installing new components, where the assembly of the camera, lens, and other required components does not fit in the camera housing.

J.

Provide supports to structure for all ceiling mounted cameras. Submit hanger detail in shop drawings.

K.

Pan limits shall be set as directed by the Contract Officer. Tilt limits shall be set from horizontal to 90 degrees below horizontal.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-18

L.

Crimp on connectors shall be used for coaxial cable connectors. Twist on type connectors shall not be acceptable.

M.

Camera back focus shall be set so camera remains focused when zooming all the way out or zooming all the way in.

N.

As applicable, all pan tilt zoom cameras shall automatically adjust, using set points, to view the intended target, when the cameras call-up switching signal is generated for door controls. Set points shall not be used when the camera is called-up for general surveillance.

O.

The date, time, and camera identification shall be displayed at the top of the video monitor.

P.

Video call-up shall be effected within 300 milliseconds of receiving switching communications from the PLC.

3.2

ALIGNMENT

A.

All cameras shall be synchronized to prevent rolling when switched on each monitor and adjusted to optimize the video presentation at the display consoles.

3.3

COMPLETION

A.

General: Upon completion of the work, remove excess debris, materials, equipment, apparatus, tools and the like and leave the premises clean, neat and orderly.

B.

Testing: The completed system shall be tested by the Contractor prior to the acceptance test.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-19

LEGEND FOR CCTV SCHEDULE (TABLE 17200-1)

SHEET:

Drawing sheet number showing camera location.

CAMERA TYPE:

Type - A# Mini Camera

Type - B# Pan/Tilt/Zoom Camera System

The # listed after the type identifies the camera mount. See Part 2 of the Specification above for additional information.

OPTIONS:

The letter listed identifies the required options for the camera if applicable. See Part 2 of the Specification above for additional information.

FOV:

Field of View. Provide lens as required to obtain within 4° of indicated horizontal field of view.

VF-# Variable Focal Lens. Adjust lens to obtain field of view indicated by the

#. At no additional charge to the Government, adjust variable focal lenses as instructed by the Contracting Officer during the final acceptance tests.

PTZ-# Pan Tilt Zoom. Designation after PTZ indicates the control station(s) that shall have control of the pan tilt and zoom functions. All other control stations shall be prohibited for controlling the camera.

MONITOR:

Monitor assignment with associated function.

M# See Table 17200-2.

CCL The left most picture-in picture video image on the touchscreen control system.

CCR The right most picture-in picture video image on the touchscreen control system.

GEN Camera provided strictly for general surveillance. This camera, typical of all of the other cameras, may be called up to any monitor in the institution by using one of the CCTV controllers. See also the operational description for the touchscreen control system.

FUNCTION:

Switching input which automatically assigns the camera to the designated monitor. Switching shall be effected when the operator acknowledges the intercom call or connects an audio channel on the traditional control panels or opens the associated door control window on the touchscreen system.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-20

NOTES:

1. Provide ten (10) spare variable focal length lenses to allow the

Government to revise the specified field of view at no additional cost.

2.

"*" Represents housing buildings 1, 2, 3, 4, 5, and 6.

3.

Monitor shall default back to the video image to which it is functionally "fixed" when the intercom call is reset at the panel.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-21

TABLE 17200-1 USP

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-101 H*-H01 SCC-H* A1 - VF-63 CCL IC-H*-A162Aa&b 2

QE-101 H*-H02 SCC-H* A1 - 83 CCR IC-H*-A162Aa&b 2 QE-101 H*-H03 SCC-H* A1 W VF-63 CCL IC-H*-A114Aa&b 2 QE-101 H*-H04 SCC-H* A1 - 83 CCR IC-H*-A114Aa&b 2 QE-101 H*-H05 SCC-H* A1 - VF-63 CCL IC-H*-C162Aa&b 2 QE-101 H*-H06 SCC-H* A1 - 83 CCR IC-H*-C162Aa&b 2 QE-101 H*-H07 SCC-H* A1 W VF-63 CCL IC-H*-C114Aa&b 2 QE-101 H*-H08 SCC-H* A1 - 83 CCR IC-H*-C114Aa&b 2

QE-102 H*-H09 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H10 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H11 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H12 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H13 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H14 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H15 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H16 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H17 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H18 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H19 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H20 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H21 SCC-H* A1 W VF-34 GEN 2

QE-102 H*-H22 SCC-H* A1 W VF-34 GEN 2

QE-103 RE01 SCC-RE A2 - VF-34 CCR IC-RE-104Da&b QE-103 RE02 SCC-RE A2 - VF-34 CCL IC-RE-104Da&b QE-103 RE03 SCC-RE A2 - VF-34 CCR IC-RE-101Aa&b QE-103 RE04 SCC-RE A2 - VF-34 CCL IC-RE-101Aa&b

QE-103 RE05 SCC-RE A2 - 11 GEN

QE-103 RE06 SCC-RE A2 - 11 GEN

QE-103 RE07 SCC-RE A2 - 11 GEN

QE-103 RE08 SCC-RE A1 - VF-46 GEN

QE-103 RE09 SCC-RE A1 - VF-46 GEN

QE-103 RE10 SCC-RE A1 - VF-46 GEN

QE-103 RE11 SCC-RE A1 - VF-46 GEN

QE-103 RE12 SCC-RE A1 - VF-34 GEN

QE-103 RE13 SCC-RE A1 - VF-34 GEN

CLOSED CIRCUIT TELEVISION SYSTEM 17200-22

TABLE 17200-1 USP (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-103 RE14 SCC-RE A2 - 24 GEN

QE-103 RE15 SCC-RE A2 - 24 GEN

QE-103 RE16 SCC-RE A1 - VF-34 GEN

QE-103 RE17 SCC-RE A2 - 17 GEN

QE-103 RE18 SCC-RE A2 - 17 GEN

QE-103 RE19 SCC-RE A2 - 11 GEN

QE-103 RE20 SCC-RE A1 - VF-63 GEN

QE-103 RE21 SCC-RE A1 - VF-63 GEN

QE-103 RE22 SCC-RE A1 - VF-34 GEN

QE-104 EM01 SCC-EM A2 - VF-34 CCR IC-EM-105Da&b QE-104 EM02 SCC-EM A2 - VF-34 CCL IC-EM-105Da&b QE-104 EM03 SCC-EM A2 - VF-34 CCR IC-EM-179Sa&b QE-104 EM04 SCC-EM A2 - VF-34 CCL IC-EM-179Sa&b QE-104 EM05 SCC-EM A2 - 24 CCR IC-EM-160Aa&b QE-104 EM06 SCC-EM A2 - 24 CCL IC-EM-160Aa&b

QE-104 EM07 SCC-EM A2 - 11 GEN

QE-104 EM08 SCC-EM A2 - 11 GEN

QE-104 EM09 SCC-EM A2 - 11 GEN

QE-104 EM10 SCC-EM A2 - 11 GEN

QE-104 EM11 SCC-EM A2 - 11 GEN

QE-104 EM12 SCC-EM A1 - VF-34 GEN

QE-104 EM13 SCC-EM A1 - VF-34 GEN

QE-104 EM14 SCC-EM A1 - VF-34 GEN

QE-104 EM15 SCC-EM A1 - VF-34 GEN

QE-104 EM16 SCC-EM A1 - VF-34 GEN

QE-104 EM17 SCC-EM A1 - VF-34 GEN

QE-104 EM18 SCC-EM A2 - 24 GEN

QE-104 EM19 SCC-EM A2 - 11 GEN

QE-104 EM20 SCC-EM A1 - VF-63 GEN

QE-104 EM21 SCC-EM A1 - VF-63 GEN

QE-104 EM22 SCC-EM A1 - VF-34 GEN

QE-104 EM23 SCC-EM A1 - VF-34 GEN

QE-104 EM24 SCC-EM A1 - VF-34 GEN

QE-104 EM25 SCC-EM A1 - VF-34 GEN

QE-104 EM26 SCC-EM A1 - VF-34 GEN

CLOSED CIRCUIT TELEVISION SYSTEM 17200-23

TABLE 17200-1 USP (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-104 EM27 SCC-EM A1 - VF-34 GEN

QE-104 EM28 SCC-EM A1 - VF-34 GEN

QE-104 EM29 SCC-EM A1 - VF-34 GEN

QE-104 EM30 SCC-EM A1 - VF-34 GEN

QE-104 EM31 SCC-EM A1 - VF-34 GEN

QE-104 EM32 SCC-EM A1 - VF-34 GEN

QE-104 EM33 SCC-EM A1 - 83 GEN

QE-105 SH01 SCC-SH A1 W 24 CCL IC-SH-D104Ba&b (CC)

M11 IC-SH-D104Ba&b (GT1) QE-105 SH02 SCC-SH A1 W 24 CCR IC-SH-D104Ba&b (CC)

M12 IC-SH-D104Ba&b (GT1) QE-105 SH03 SCC-SH A1 W VF-34 CCL IC-SH-D104Aa&b (CC)

M11 IC-SH-D104Aa&b (GT1) QE-105 SH04 SCC-SH B2 - PTZ-CC, GT1 CCR IC-SH-D104Aa&b (CC)

M12 IC-SH-D104Aa&b (GT1) QE-105 SH05 SCC-SH A1 W VF-63 CCL IC-SH-D104Ca&b QE-105 SH06 SCC-SH A1 - VF-63 CCR IC-SH-D104Ca&b QE-105 SH07 SCC-SH A1 - VF-34 CCL IC-SH-D104Ca&b QE-105 SH08 SCC-SH A1 - VF-34 CCR IC-SH-D104Ca&b QE-105 SH09 SCC-SH A1 - VF-50 CCL IC-SH-D104Ca&b QE-105 SH10 SCC-SH A1 - VF-50 CCR IC-SH-D104Ca&b

QE-105 SH11 SCC-SH A2 - 11 M5 FIXED

QE-105 SH12 SCC-SH A2 - 11 M7 FIXED

QE-105 SH13 SCC-SH A2 - 11 M9 FIXED

QE-105 SH14 SCC-SH A2 - 11 GEN

QE-105 SH15 SCC-SH A2 - 11 GEN

QE-105 SH16 SCC-SH A2 - 11 GEN

QE-105 SH17 SCC-SH A1 W VF-50 GEN

QE-105 SH18 SCC-SH A1 W VF-50 GEN

QE-105 SH19 SCC-SH A1 W VF-50 GEN

QE-105 SH20 SCC-SH A1 W VF-50 GEN

QE-105 SH21 SCC-SH A1 W VF-50 GEN

QE-105 SH22 SCC-SH A1 W VF-50 GEN

QE-105 SH23 SCC-SH A1 W VF-50 GEN

QE-105 SH24 SCC-SH A1 W VF-50 GEN

QE-105 SH25 SCC-SH A1 W VF-50 GEN

QE-105 SH26 SCC-SH A1 W VF-50 GEN

CLOSED CIRCUIT TELEVISION SYSTEM 17200-24

TABLE 17200-1 USP (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-106 SH27 SCC-SH A2 - 11 M6 FIXED

QE-106 SH28 SCC-SH A2 - 11 M7 FIXED

QE-106 SH29 SCC-SH A2 - 11 M10 FIXED

QE-106 SH30 SCC-SH A2 - 11 GEN

QE-106 SH31 SCC-SH A2 - 11 GEN

QE-106 SH32 SCC-SH A2 - 11 GEN

QE-107 PS01 SCC-SH A1 - VF-63 CCL IC-AI-B169Aa&b QE-107 PS02 SCC-SH A2 - VF-34 CCR IC-AI-B169Aa&b QE-107 PS03 SCC-SH A2 - VF-34 CCL IC-AI-B170Aa&b QE-107 PS04 SCC-SH A2 - VF-34 CCR IC-AI-B170Aa&b QE-107 PS05 SCC-SH A2 - VF-34 CCR IC-AI-B170Aa&b QE-107 PS06 SCC-SH A2 - VF-34 CCL IC-AI-B170Aa&b QE-108 AI01 SCC-AI A2 - VF-34 CCL IC-AI-D102Aa&b QE-108 AI02 SCC-AI A2 - VF-34 CCR IC-AI-D102Aa&b QE-108 AI03 SCC-AI A2 - VF-34 CCL IC-AI-D101Aa&b QE-108 AI04 SCC-AI A2 - VF-34 CCR IC-AI-B101a&b QE-108 AI05 SCC-AI A2 - VF-34 CCL IC-AI-B101a& QE-108 AI06 SCC-AI A1 W VF-63 CCL IC-AI-101Da&b QE-108 AI07 SCC-AI A1 W VF-63 CCR IC-AI-101Da&b QE-108 AI08 SCC-AI A2 - VF-34 CCR IC-AI-B126Ba&b QE-108 AI09 SCC-AI A1 - VF-63 CCL IC-AI-B126Ba&b QE-108 AI10 SCC-AI A1 - VF-63 CCR IC-AI-B126Aa&b QE-108 AI11 SCC-AI A1 W VF-24 CCL IC-AI-B126Aa&b QE-108 AI12 SCC-AI A1 - VF-63 CCL IC-AI-B126Ca&b QE-108 AI13 SCC-AI A1 - VF-34 CCR IC-AI-B126Ca&b

QE-108 AI14 SCC-AI B1 - PTZ-CC GEN

QE-108 AI15 SCC-AI B1 - PTZ-CC GEN

QE-108 AI16 SCC-AI B1 - PTZ-CC GEN

QE-108 AI17 SCC-AI B1 - PTZ-CC GEN

QE-108 AI18 SCC-AI A1 W VF-34 GEN

QE-108 AI19 SCC-AI A1 W VF-34 GEN

QE-108 AI20 SCC-AI A2 - 24 GEN

QE-108 AI21 SCC-AI A2 - 24 GEN

QE-109 FS01 SCC-MS A1 - VF-34 CCR IC-FS-D101Ba&b QE-109 FS02 SCC-MS A1 - VF-34 CCL IC-FS-D101Ba&b

CLOSED CIRCUIT TELEVISION SYSTEM 17200-25

TABLE 17200-1 USP (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK QE-109 FS03 SCC-AI A2 - VF-34 CCR IC-AI-D101Aa&b

QE-109 FS04 SCC-MS A1 - VF-34 GEN

QE-109 FS05 SCC-MS A1 - VF-34 GEN

QE-109 FS06 SCC-MS A2 - 24 GEN

QE-109 FS07 SCC-MS A2 - 24 GEN

QE-109 FS08 SCC-MS A1 - VF-34 GEN

QE-109 FS09 SCC-MS A1 - VF-34 GEN

QE-109 FS10 SCC-MS A1 - VF-34 GEN

QE-109 FS11 SCC-MS A1 - VF-34 GEN

QE-109 FS12 SCC-MS A1 - VF-34 GEN

QE-109 FS13 SCC-MS A1 - VF-34 GEN

QE-109 FS14 SCC-MS A1 - VF-34 GEN

QE-109 FS15 SCC-MS A1 - VF-34 GEN

QE-109 FS16 SCC-MS A1 - VF-34 GEN

QE-109 FS17 SCC-MS A1 - VF-34 GEN

QE-109 FS18 SCC-MS A1 - VF-34 GEN

QE-109 FS19 SCC-MS A1 - VF-34 GEN

QE-109 FS20 SCC-MS A1 - VF-34 GEN

QE-109 FS21 SCC-MS A1 - VF-34 GEN

QE-110 MS01 SCC-MS A2 - VF-34 CCR IC-MS-E101Ba&b QE-110 MS02 SCC-MS A2 - VF-34 CCL IC-MS-E101Ba&b QE-110 MS03 SCC-MS A2 - VF-34 CCR IC-MS-E101Aa&b QE-110 MS04 SCC-MS A2 - VF-34 CCL IC-MS-E101Aa&b

QE-110 MS05 SCC-MS A2 - 24 GEN

QE-110 MS06 SCC-MS A2 - 24 GEN

QE-110 MS07 SCC-MS A2 - 24 GEN

QE-110 MS08 SCC-MS A2 - 24 GEN

QE-110 MS09 SCC-MS A1 - VF-34 GEN

QE-110 MS10 SCC-MS A1 - VF-34 GEN

QE-110 MS11 SCC-MS A1 W VF-34 GEN

QE-110 MS12 SCC-MS A1 W VF-34 GEN

QE-111 UF01 SCC-UF A2 - VF-34 CCR IC-UF-108Fa&b QE-111 UF02 SCC-UF A1 W 24 CCL IC-UF-108Fa&b

CCL IC-UF-108B

CCL IC-UF-108C

CLOSED CIRCUIT TELEVISION SYSTEM 17200-26

TABLE 17200-1 USP (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK QE-111 UF03 SCC-UF A1 - VF-34 CCR IC-UF-108Ea&b QE-111 UF04 SCC-UF A2 - VF-34 CCL IC-UF-108Ea&b

QE-111 UF05 SCC-UF A1 W VF-34 CCR IC-UF-108B

QE-111 UF06 SCC-UF A1 W VF-34 CCR IC-UF-108C

QE-111 UF07 SCC-UF A1 - VF-46 CCR IC-UF-F101A

QE-111 UF08 SCC-UF A1 - VF-46 CCL IC-UF-F101A

QE-111 UF09 SCC-UF A2 - 24 GEN

QE-111 UF10 SCC-UF A2 - 24 GEN

QE-111 UF11 SCC-UF A1 - VF-46 GEN

QE-111 UF12 SCC-UF A1 - VF-46 GEN

QE-113 SC01 SCC-H2 A2 - VF-34 CCL IC-SC-102Da&b QE-113 SC02 SCC-H2 A2 - VF-34 CCR IC-SC-102Da&b QE-113 SC03 SCC-H2 A2 - VF-34 CCL IC-SC-103Da&b QE-113 SC04 SCC-H2 A2 - VF-34 CCR IC-SC-103Da&b QE-113 SC05 SCC-H5 A2 - VF-34 CCL IC-SC-107Da&b QE-113 SC06 SCC-H5 A2 - VF-34 CCR IC-SC-107Da&b QE-113 SC07 SCC-H5 A2 - VF-34 CCR IC-SC-106Da&b QE-113 SC08 SCC-H5 A2 - VF-34 CCL IC-SC-106Da&b

QE-114 GT01 SCC-GT7 B4 - PTZ-CC, GT7 M17 FIXED

QE-114 GT02 SCC-GT7 B4 - PTZ-CC, GT7 M18 FIXED

QE-114 GT03 SCC-GT7 B4 - PTZ-CC, GT7 M15 FIXED

QE-114 GT04 SCC-GT7 B4 - PTZ-CC, GT7 M16 FIXED

QE-114 GT05 SCC-GT7 A1 W 83 CCL IC-GT7-101a&b

M13 FIXED

QE-114 GT06 SCC-GT7 A1 - 83 CCR IC-GT7-101a&b

M14 FIXED

QE-114 GT07 SCC-GT7 A1 - 83 CCL IC-GT7-103a&b(CC)

M15 IC-GT7-103a&b(GT7) 3 QE-114 GT08 SCC-GT7 A1 - 83 CCR IC-GT7-103a&b(CC)

M16 IC-GT7-103a&b(GT7) 3 QE-120 AO01 SCC-AO A1 - 24 CCL IC-AO-121a&b

QE-120 AO02 SCC-AO A1 - VF-34 CCL IC-GL1

QE-120 AO03 SCC-AO A1 - VF-46 CCR IC-AO-101Aa&b QE-120 AO04 SCC-AO A1 - VF-46 CCL IC-AO-101Aa&b QE-500 VSP-1 SCC-GT1 B2 T PTZ-CC, GT1 CCL IC-VSP-4a&b (CC)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-27

CCL

IC-VSP-1a&b (CC)

M11 IC-VSP-4a&b (GT1) M11 IC-VSP-1a&b (GT1)

QE-500 VSP-2 SCC-GT1 B2 T PTZ-CC, GT1 CCR IC-VSP-4a&b (CC) CCR IC-VSP-1a&b (CC) M12 IC-VSP-4a&b (GT1) M12 IC-VSP-1a&b (GT1)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-28

TABLE 17200-2 USP

MONITOR SCHEDULE

MONITOR

MONITOR MONITOR ASSOCIATED PRIMARY

DESIGNATION TYPE LOCATION CONTROLLER FUNCTION

M1 228.6mm (9") CP-CC5 CC5 General Surveillance

M2 228.6mm (9") CP-CC5 CC5 General Surveillance

M3 228.6mm (9") CP-CC9 CC9 General Surveillance

M4 228.6mm (9") CP-CC9 CC9 General Surveillance

M5 228.6mm (9") CP-SHA CC5, CC9 SHU Surveillance

M6 228.6mm (9") CP-SHA CC5, CC9 SHU Surveillance

M7 228.6mm (9") CP-SHB CC5, CC9 SHU Surveillance

M8 228.6mm (9") CP-SHB CC5, CC9 SHU Surveillance

M9 228.6mm (9") CP-SHC CC5, CC9 SHU Surveillance

M10 228.6mm (9") CP-SHC CC5, CC9 SHU Surveillance

M11 228.6mm (9") CP-GT1 GT1 Movement Control

M12 228.6mm (9") CP-GT1 GT1 Movement Control

M13 228.6mm (9") CP-GT3 CC5, CC9 Movement Control

M14 228.6mm (9") CP-GT3 CC5, CC9 Movement Control

M15 228.6mm (9") CP-GT7 GT7 Movement Control and

General Surveillance

M16 228.6mm (9") CP-GT7 GT7 Movement Control and

General Surveillance

M17 228.6mm (9") CP-GT7 GT7 General Surveillance

M18 228.6mm (9") CP-GT7 GT7 General Surveillance

REMARKS:

1.

The associated controller shall be the only CCTV controller that can assign video to the monitor.

2.

See CCTV Functional Schematic for video switcher outputs for the Touchscreen System.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-29

TABLE 17200-1 FCI

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-101 H*-H01 SCC-H* A1 - VF-63 GEN 2

QE-101 H*-H02 SCC-H* A1 - VF-63 GEN 2

QE-101 H*-H03 SCC-H* A1 - VF-63 GEN 2

QE-101 H*-H04 SCC-H* A1 - VF-63 GEN 2

QE-102 H*-H05 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H06 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H07 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H08 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H09 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H10 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H11 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H12 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H13 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H14 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H15 SCC-H* A1 - VF-34 GEN 2

QE-102 H*-H16 SCC-H* A1 - VF-34 GEN 2

QE-103 H*-H21 SCC-H* A1 - VF-63 GEN 2

QE-103 H*-H22 SCC-H* A1 - VF-63 GEN 2

QE-103 H*-H23 SCC-H* A1 - VF-63 GEN 2

QE-103 H*-H24 SCC-H* A1 - VF-63 GEN 2

QE-104 H*-H25 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H26 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H27 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H28 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H29 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H30 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H31 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H32 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H33 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H34 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H35 SCC-H* A1 - VF-34 GEN 2

QE-104 H*-H36 SCC-H* A1 - VF-34 GEN 2

QE-105 AI01 SCC-HS A1 W VF-34 CCR IC-AI129a&b QE-105 AI02 SCC-HS A1 W VF-34 CCL IC-AI129a&b

QE-105 AI03 SCC-AI B1 - PTZ-CC GEN

CLOSED CIRCUIT TELEVISION SYSTEM 17200-30

TABLE 17200-1 FCI (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-105 AI04 SCC-AI B1 - PTZ-CC GEN

QE-105

AI05 SCC-AI B1 - PTZ-CC GEN

QE-105

AI06 SCC-AI B1 - PTZ-CC GEN

QE-105 AI07 SCC-AI B2 P PTZ-CC GEN

QE-105 AI08 SCC-AI B2 P PTZ-CC GEN

QE-106 HS01 SCC-HS A1 - VF-63 CCL IC-AI129a&b QE-106 HS02 SCC-HS A1 - VF-63 CCR IC-AI129a&b QE-107 SH01 SCC-SH A1 W VF-34 CCL IC-SH104Ba&b QE-107 SH02 SCC-SH A1 - VF-34 CCR IC-SH104Ba&b

QE-107 SH03 SCC-SH A1 W VF-50 GEN

QE-107 SH04 SCC-SH A1 W VF-50 GEN

QE-107 SH05 SCC-SH A1 W VF-50 GEN

QE-107 SH06 SCC-SH A1 W VF-50 GEN

QE-107 SH07 SCC-SH A1 W VF-50 GEN

QE-107 SH08 SCC-SH A1 W VF-50 GEN

QE-107 SH09 SCC-SH A1 W VF-50 GEN

QE-107 SH10 SCC-SH A1 W VF-50 GEN

QE-107 SH11 SCC-SH A1 W VF-50 GEN

QE-107 SH12 SCC-SH A1 W VF-50 GEN

QE-109 RE01 SCC-SH A1 - VF-34 GEN

QE-109 RE02 SCC-SH A1 - VF-34 GEN

QE-109 RE03 SCC-SH A1 - VF-34 GEN

QE-109 RE04 SCC-SH A1 - VF-34 GEN

QE-109 RE05 SCC-SH A1 - VF-34 GEN

QE-109 RE06 SCC-SH A1 - VF-34 GEN

QE-109 RE07 SCC-SH A1 - VF-34 GEN

QE-109 RE08 SCC-SH A1 - VF-34 GEN

QE-109 RE09 SCC-SH A1 P VF-34 GEN

QE-109 RE10 SCC-SH A1 P VF-34 GEN

QE-110 FS01 SCC-FS A1 W VF-34 GEN

QE-110 FS02 SCC-FS A1 W VF-34 GEN

QE-110 FS03 SCC-FS A1 - VF-34 GEN

QE-110 FS04 SCC-FS A1 - VF-34 GEN

QE-110 FS05 SCC-FS A1 - VF-34 GEN

CLOSED CIRCUIT TELEVISION SYSTEM 17200-31

TABLE 17200-1 FCI (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-110 FS06 SCC-FS A1 - VF-34 GEN

QE-110 FS07 SCC-FS A1 - VF-34 GEN

QE-110 FS08 SCC-FS A1 - VF-34 GEN

QE-110 FS09 SCC-FS A1 - VF-34 GEN

QE-110 FS10 SCC-FS A1 - VF-34 GEN

QE-110 FS11 SCC-FS A1 - VF-34 GEN

QE-110 FS12 SCC-FS A1 - VF-34 GEN

QE-110 FS13 SCC-FS A1 - VF-34 GEN

QE-110 FS14 SCC-FS A1 - VF-34 GEN

QE-110 FS15 SCC-FS A1 - VF-34 GEN

QE-110 FS16 SCC-FS A1 - VF-34 GEN

QE-111 MS01 SCC-FS A1 W VF-34 GEN

QE-111 MS02 SCC-FS A1 W VF-34 GEN

QE-112 PS01 SCC-PS A1 - VF-34 GEN

QE-112 PS02 SCC-PS A1 - VF-34 GEN

QE-113 UF01 SCC-UF A1 W VF-46 GEN

QE-113 UF02 SCC-UF A1 W VF-46 GEN

QE-116 EM01 SCC-EM A1 - VF-46 GEN

QE-116 EM02 SCC-EM A1 - VF-46 GEN

QE-116 EM03 SCC-EM A1 - VF-46 GEN

QE-116 EM04 SCC-EM A1 - VF-34 GEN

QE-116 EM05 SCC-EM A1 - VF-34 GEN

QE-116 EM06 SCC-EM A1 - VF-34 GEN

QE-116 EM07 SCC-EM A1 - VF-34 GEN

QE-116 EM08 SCC-EM A1 - VF-34 GEN

QE-116 EM09 SCC-EM A1 - VF-34 GEN

QE-116 EM10 SCC-EM A1 - VF-34 GEN

QE-116 EM11 SCC-EM A1 - VF-34 GEN

QE-116 EM12 SCC-EM A1 - VF-63 GEN

QE-120 AO01 SCC-AO A1 - 24 CCL IC-AO-121a&b

QE-120 AO02 SCC-AO A1 - VF-34 CCL IC-GL1

QE-120 AO03 SCC-AO A1 - VF-46 CCR IC-AO-101Aa&b QE-120 AO04 SCC-AO A1 - VF-46 CCL IC-AO-101Aa&b QE-500 VSP-1 SCC-SG B2 T PTZ-CC CCL IC-VSP-4a&b (CC)

CCL IC-VSP-1a&b (CC)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-32

TABLE 17200-1 FCI (continued)

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION REMARK

QE-500 VSP-2 SCC-SG B2 T PTZ-CC CCR IC-VSP-4a&b (CC) CCR IC-VSP-1a&b (CC)

CLOSED CIRCUIT TELEVISION SYSTEM 17200-33

TABLE 17200-2 FCI

MONITOR

MONITOR MONITOR ASSOICATED PRIMARY

DESIGNATION TYPE LOCATION CONTROLLER FUNCTION

M1 228.6mm (9") CP-CC5 CC5 General Surveillance

M2 228.6mm (9") CP-CC5 CC5 General Surveillance

M3 228.6mm (9") CP-CC9 CC9 General Surveillance

M4 228.6mm (9") CP-CC9 CC9 General Surveillance

REMARKS:

1.

The associated controller shall be the only CCTV controller that can assign video to the monitor.

2.

See CCTV Functional Schematic for video switcher outputs for the Touchscreen System.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-34

TABLE 17200-1 FDC

CCTV SCHEDULE

SHT CCTV EQ. CAMERA FOV

NO. NO. ROOM TYPE OPTIONS (Degrees) MONITOR FUNCTION

FDC TABLES ARE SIMILAR BUT DIFFERENT TO THE USP

AND FCI TABLES. REVIEW TABLES CAREFULLY WITH

FBOP PRIOR TO DEVELOPING FOR CONSTRUCTION

DOCUMENTS.

CLOSED CIRCUIT TELEVISION SYSTEM 17200-35

TABLE 17200-2 FDC

MONITOR SCHEDULE

MONITOR

MONITOR MONITOR PRIMARY

DESIGNATION TYPE LOCATION FUNCTION

FDC TABLES ARE SIMILAR BUT DIFFERENT TO THE USP

AND FCI TABLES. REVIEW TABLES CAREFULLY WITH

FBOP PRIOR TO DEVELOPING FOR CONSTRUCTION

DOCUMENTS.

END OF SECTION 17200