IFB_6200_BYS1062_ADD_1_v1.pdf

PDF 395 KB Posted

Attached to
Span Wire and Communications Supplies
Solicitation number
IFB 6200 BYS1062
Issued by
Texas

About this file

This Solicitation Addendum No. 1, dated November 9, 2026, issued by Austin Financial Services – Central Procurement, modifies Invitation for Bid 6200 BYS1062 for span wire and communications supplies supporting traffic signal infrastructure throughout the City of Austin, Texas. The solicitation encompasses 78 line items across Category 1, including cable management panels, fiber optic cables and adapters, cable suspension bolts, conduit, patch cords, and associated hardware. Estimated annual quantities range from 2 units of certain cable management panels to 3,750 units of square nuts and guy wire strand. The addendum incorporates clarifications regarding pricing sheets, adds Attachment 11 for Cat 5E patch cords (Items 61-64), and addresses unit-of-measure corrections for nine line items. The original solicitation closing date was November 17, 2026, with one copy of the executed addendum required to be returned prior to the closing date to avoid potential rejection.

The addendum clarifies that pricing must be completed per the updated SUBMITTAL-Prices and Pricing V2 sheet, with specific unit designations for each line item, including per-pack, per-reel, and per-each pricing. Key responses address the experience requirement, confirming that authorized distributors' and manufacturers' experience and references satisfy the three-year experience and three-reference requirement, with documentation of previous purchase orders or awarded contracts required. The City expects to place two to three orders annually, with typical order quantities representing 15-20 percent of the estimated annual quantity per line item. The addendum also clarifies that vendors may submit pricing for selected line items only and mark remaining items as "no bid" without being deemed non-responsive, though lump-sum awards may affect selection outcomes. City-approved equivalents do not require pre-award approval; offerors may propose alternatives by entering manufacturer and model/part numbers for City evaluation against specifications.

View the file

Other files

File Type Posted
IFB_6200_BYS1062_ATT_5_v1.docx DOCX document
IFB_6100_CLMC1100_PLANS_v1.pdf PDF
IFB_6200_BYS1062_ATT_2_v1.pdf PDF
IFB_6200_BYS1062_0600_v1.xlsx XLSX spreadsheet
IFB_6200_BYS1062_ATT_4_v1.docx DOCX document
IFB_6200_BYS1062_ATT_8_v1.docx DOCX document
IFB_6200_BYS1062_ATT_10_v1.docx DOCX document
IFB_6200_BYS1062_ATT_3_v1.xlsx XLSX spreadsheet
IFB_6200_BYS1062_ATT_1_v1.docx DOCX document
IFB_6200_BYS1062_ATT_6_v1.docx DOCX document
IFB_6200_BYS1062_ATT_7_v1.docx DOCX document
IFB_6200_BYS1062_PAC1_v1.pdf PDF
IFB_6200_BYS1062_ATT_9_v1.docx DOCX document
IFB_6200_BYS1062_ATT_11_v1.pdf PDF
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SOLICITATION ADDENDUM

AUSTIN FINANCIAL SERVICES – CENTRAL PROCUREMENT

Revised 10/01/2024

Solicitation: IFB 6200 BYS1062 Addendum No: 1 Date: 11/9/2026

This addendum is to incorporate the following changes to the above referenced solicitation:

1.0 Clarifications:

a. The price sheet published with the solicitation has been deleted and replaced with the following, labeled SUBMITTAL-Prices and Pricing V2.

b. Attachment 11, Items 61-64-Cat 5E patch cords has been added and attached below.

2.0 Questions:

Number Question Response

Experience (PAC1 sec 1.3.A-B, ATT_6):

Can an authorized distributor's or manufacturer's experience and references satisfy the 3-year experience and 3-reference requirement?

Yes, an authorized distributor's or manufacturer's experience and references satisfy the 3-year experience and 3-reference requirement.

Exhibits 61-64 (Cat 5E patch cords) are not in ATT_2. Please provide them or confirm the spec

Please see Attachment 11, Items 61- 64-Cat 5E patch cords, also added below.

Units: lines 1, 26, 39, 43, 47, 49, 52, 53, 66 are listed as "Each", but the descriptions say pack, reel, or strand.

Should these be priced per each or per pack/reel?

The Price Sheet has been updated, please use version 2.

Line Item 1: priced per pack Line Item 26: Priced per reel Line Item 39: Priced per pk of 200 Line Item 43: Priced per reel Line Item 47: Each Line Item 49: Each Line Item 52-53: Priced per Pack of 10 Line Item 66: Priced per each

Possible duplicates: lines 24, 69, 71 (Commscope FOSC 450 domes) and lines 38 and 67. Please confirm these are different items

The SUBMITTAL-Prices and Pricing has been updated, please use version 2.

Please disregard Line item 38, will use Line item 67. 69 and 71 are not duplicates, as they have different cable lengths. Please disregard Item 24.

For purchases made on an as-needed basis, what are the typical quantities ordered per line item in each purchase order?

The City expects to order 15-20% of the Estimated Annual Quanitity listed on the Price Sheet per order

Approximately how many orders are expected per year? Historical ordering information would be appreciated if estimates are unavailable.

The City expects to place 2-3 orders per year.

Experience requirement and distributor reliance. The solicitation requires offerors to show a minimum of three years supplying span wire and communications supplies to an agency similar in size and scope to the City, documented through the references form, and to be an authorised dealer or reseller of the products offered. Where an offeror supplies the products through an authorised distributor, may the distributor's experience and references be submitted to satisfy the three-year experience requirement, with the offeror identified as the contracting party? If so, what documentation of the distributor relationship does the City require with the offer?

Yes, an authorized distributor's or manufacturer's experience and references satisfy the 3-year experience and 3-reference requirement. The Offeror should provide documentation of previous orders of similar size & scope Ex.

Previous Purchase Orders, awarded contracts.

Line 40: ATT_3 and ATT_2 skip item 40, but PAC1 p.2 and p.40 say exhibits 1-78.

Is line 40 intentionally omitted?

Yes, line 40 was intentionally omitted.

Equals: How are "City Approved Equivalent" items approved, and are samples or submittals required before award?

If the offeror is proposing an equivalent, they must enter the manufacturer and model/part number. If the item listed meets the specifications in the Exhibit, the City will approve.

Line 7: "HOT TIP" galvanized. Please confirm this means hot dip galvanized

Yes, "HOT TIP" galvanized means hot dip galvanized per Exhibit 7.

May vendors submit pricing for selected line items only and mark the remaining items as “No Bid,” without being considered non-responsive?

No, offerors will not be deemed non-responsive for marking items "no bid". However, if the City decides to award by lump sum rather than by line, it may affect whether an offeror is awarded or not.

City Approved Equivalents. The price sheet describes a number of lines as the named item "Or City Approved Equivalent." Must approval of an equivalent be obtained from the City before the response is submitted, and if so through what process and by what date — or may an equivalent be offered in the response itself, subject to the City's evaluation?

No, approval of an equivalent does not need to be obtained from the City before the response is submitted. If the offeror is proposing an equivalent, they must enter the manufacturer and model/part number. If the item listed meets the specifications in the Exhibit, the City will approve.

3.0 ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME.

ACKNOWLEDGED BY:

Offeror Name Offeror Authorized Signature Date

RETURN ONE COPY OF THIS ADDENDUM WITH YOUR RESPONSE PRIOR TO THE SOLICITATION

CLOSING DATE. FAILURE TO DO SO MAY CONSTITUTE GROUNDS FOR REJECTION OF YOUR

OFFER.

JacketConductor

Insulation

P1 P2

LENGTH

Molding YU-58A Molding YU-58A

Plug Plug

Marking:

<FP1601>

CAT.5E UTP PATCH ETL VERIFIED TO ANSI/TIA-568-C.2 & ISO/IEC 11801 ED.2 & EN 50288-3-2 & IEC 60332-1-2 ▲ 24AWGX4P CMX(UL) E164469-XX RoHS WWW.MONOPRICE.COM

C A T

5EC

A T 5E

Conductor

Jacket

Insulation

PVC

P1(T568B) P2(T568B) WIRE

WHT/ORG

ORG

WHT/GRN

GRN

BLU

WHT/BLU

WHT/BRN

BRN

PINOUT

P1(T568B) P2(T568B) WIRE

WHT/ORG

ORG

WHT/GRN

GRN

BLU

WHT/BLU

WHT/BRN

BRN

PINOUT

LHY

V16895

LHY

PART NAME SPECIFICATION DESCRIPTION QT UNIT

PLUG 8P8C 50u" 2 PCS

CABLE LAN PATCH C5E UTP(W/O Cross) 24AWG 4P PVC AR FT

Thickness:MIN at any point:0.42mm MAX AVG:0.48mm

Diameter:5.6±0.3mm

Thickness:MIN at any point:0.15mm MAX AVG:0.25mm

Diameter:0.94±0.06mm

Bare Copper24AWG

(7/0.196±0.015mm )

2020.12.28

Monoprice Cat5e Ethernet Patch Cable - Snagless RJ45, Stranded, 350Mhz, UTP, Pure Bare Copper Wire, 24AWG

A

A

A-A

13 23

Molding YU-58A 2 AR

YFWC-S200023

2021.04.16

Solicitation: IFB 6200 BYS1062 Addendum No: 1 Date: 11/9/2026

File details come from the government source that posted it. Updated .