SF_30_000004_HSCG85-16-R-P45245.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

000004

The purpose of this amendment is to incorporate changes to RFP HSCG85-16-R-P45245:

1. Change RFP HSCG85-16-R-P45245 submission from 01/11/2016 at 1200 PT to 01/18/2016 at 1200 PT.

2. RFP Attachment 1 (References, Work Items: 5, 19, and 36): Remove the following pages from Attachment 1 and replace with the pages appending to this amendment: v-xi, 26, 30, 96-99, 193. Changes are annotated with a line on the left.

UNITED STATES COAST GUARD

SURFACE FORCES LOGISTICS CENTER

1519 ALASKAN WAY

SEATTLE, WA 98134

HSCG85-16-R-P45245

1 1

01/07/2016

12/04/2015

USCGC POLAR STAR (WAGB-400) DRYDOCK AVAILABILITY FY2016

v (Draft-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein.

Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at time of specification writing and during contract execution.

All Coast Guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – as follows:

MIL/DOD/CID Specifications: http://www.assistdocs.com/search/search_basic.cfm

Commandant Instruction Manuals: http://www.uscg.mil/directives/default.asp

Public Laws, Code of Federal Regulations, U.S Codes, and other Federal Government laws:: www.gpoaccess.gov

The Government is aware of the following internet web links where contractors may procure commercial specifications:

American Welding Society (AWS): http://www.awspubs.com/index.php

ANSI, ASTM, IEEEE, NFPA, ASME, SAE Standards: http://www.techstreet.com/

NFPA: http://www.nfpa.org

SSPC Standards and pictorial guides: http://shopping.netsuite.com/sspcmarketplace

COAST GUARD DRAWINGS

Coast Guard Drawing 400 WAGB 3803-001, Rev M, Vent & A/C Diag

Coast Guard Drawing 400 WAGB 3803-002, Rev L, Vent & A/C Equipment List

Coast Guard Drawing 400-WAGB 3803-3, Rev G, Vent a/C Fan Fdns Typical

Coast Guard Drawing 400-WAGB 3803-4, Rev N, Vent & A/C Fan Rm Arrg 02 & 03 Lvl

Coast Guard Drawing 400-WAGB 3803-5, Rev M, Vent & A/C Fan Rm Arrg Mn Dk FR 113 Fwd

Coast Guard Drawing 400-WAGB 3803-6, Rev M, Vent & A/C Fan Rm Arrg Mn & 2nd Dk FR 113 Aft

Coast Guard Drawing 400-WAGB 3803-32, Rev N, Vent & A/C Stand Dets

Coast Guard Drawing 400 WAGB 3803-34, Rev E, A/C Cooling Coil Fdn Typical

Coast Guard Drawing 400-WAGB 3803-35, Rev C, Vent & A/C Heating & Cooling

Load Calculations

Coast Guard Drawing 400-WAGB 3803-41, Rev E, A/C Chilled Water Sys Diag

Coast Guard Drawing 400-WAGB 3803-46, Rev B, A/C Sys Control

Coast Guard Drawing 400 WAGB 0103-3, Rev AB, Booklet of General Plans 1/8 Scale

(POLAR STAR)

Coast Guard Drawing 400 WAGB 1101-002, Rev R, Shell Plating Fwd

Coast Guard Drawing 400 WAGB 1101-003, Rev P, Shell Plating Aft vi (Draft-0)

Coast Guard Drawing 400-WAGB 1105-059, Rev D, Miranda Davit Relocation Installation

Coast Guard Drawing 400-WAGB 1106-3, Rev R, 3rd Dk Plat Fwd FR 143 1/2

Coast Guard Drawing 400-WAGB 1106-4, Rev V, 3rd Dk Plat Aft FR 143 1/2

Coast Guard Drawing 400 WAGB 1906-001, Rev K, Zinc Protectors A&D

Coast Guard Drawing 400-WAGB 3901-1, Rev Z, Insulation A&D

Coast Guard Drawing 400-WAGB 3902-2, Rev E, Piping Insulation

Coast Guard Drawing 400 WAGB 4301-1, Rev Y, Arrg of Shafting

Coast Guard Drawing 400 WAGB 4301-2, Rev F, Bulkhead Seal a&D

Coast Guard Drawing 400 WAGB 4301-3, Rev J, Shaft Tubes a&D

Coast Guard Drawing 400 WAGB 4301-4, Rev 12, Center Tailshaft

Coast Guard Drawing 400 WAGB 4301-5, Rev 10, Wing Tailshaft

Coast Guard Drawing 400 WAGB 4301-11, Rev 4, Propeller Tailshaft Assy

Coast Guard Drawing 400 WAGB 4301-12, Rev 6, Oil Transfer Shaft Assy

Coast Guard Drawing 400 WAGB 4301-13, Rev 3, Outer Oil Pipe Assy (Center Shaft)

Coast Guard Drawing 400 WAGB 4301-14, Rev 3, Outer Oil Pipe Assy (Wing Shaft)

Coast Guard Drawing 400 WAGB 4301-17, Rev 1, Inner Oil Pipe Assy (Wing Shaft)

Coast Guard Drawing 400 WAGB 4302-4, Rev B, Stern Tube Bearing and Shaft Seals (With Modified Aft Bearing) Arrgt and Details

Coast Guard Drawing 400 WAGB 4400-18, Rev -, Connect Proced for Operating Rod

Coast Guard Drawing 400 WAGB 4400-34, Rev -, CPP 69 Inch Dia Lh Prop Hub Assy (Elev Sect)

Coast Guard Drawing 400 WAGB 4400-41, Rev -, CPP Hub Cylinder (Common to Lh & Rh)

Coast Guard Drawing 400 WAGB 4301-23, Rev D, Static Shaft Alignment Analysis

Coast Guard Drawing 400 WAGB 4803-12, Rev G, Arrgt of CO2 Fixed Flood Sys

Coast Guard Drawing 400 WAGB 4803-13, Rev C, Diag of CO2 Sys

Coast Guard Drawing 400 WAGB 514-003, Rev-, Hvac Std Det and Genl Instrs

Coast Guard Drawing 400 WAGB 700-001, Rev L, Docking Plan

Coast Guard Drawing 400 WAGB 103-11, Rev J, Outboard Profile

Coast Guard Drawing 400-WAGB 103-14, Rev T, Booklet of General Plans

Coast Guard Drawing 400 WAGB 103-30, Rev C, General Arrangement Mod Forward Crane

Coast Guard Drawing 400-WAGB 103-032, Rev D, General Arrangement Mod Aft

Coast Guard Drawing 400-WAGB 1105-24, Rev J, Elevator Trunk Bhds FR 53 to 57

Coast Guard Drawing 400-WAGB 1112-75, Rev -, Engineers Parts Elevator Structural Support Mods

Coast Guard Drawing 400-WAGB 1112-22, Rev AA, Foundations Aux Machinery in Motor & Gear Rooms

Coast Guard Drawing 400-WAGB 1205-4, Rev C, Lifting Pads for Rudder & Propeller

Coast Guard Drawing 400-WAGB 1205-6, Rev -, Dets of Padeyes for Lifting Gear

Coast Guard Drawing 400 WAGB 1602-2, Rev V, Arrgt & Dets of Flr Plts in Low Lvl

Coast Guard Drawing 400-WAGB 1605-1, Rev C, Elevator FR 55 & FR 108 Instl Dets

Coast Guard Drawing 400 WAGB 1901-1, Rev AB, Painting Schedule

Coast Guard Drawing 400-WAGB 2200-10, Rev -, Rudder Stock Upper & Lower Bearings

Coast Guard Drawing 400-WAGB 2200-2, Rev D, Rudder A&D

Coast Guard Drawing 400-WAGB 2200-4, Rev M, Rudder Stock A&D vii (Draft-0)

Coast Guard Drawing 400-WAGB 2200-8, Rev F, Rudder Stock Removal A&D

Coast Guard Drawing 400-WAGB 2200-9, Rev K, Arrgt of Steering Gear Rm

Coast Guard Drawing 400 WAGB 2901-3, Rev E, Tank Capacity Tables -- POLAR STAR

Coast Guard Drawing 400 WAGB 2901-13, Rev C, Intact Trim & Stability

Coast Guard Drawing 400 WAGB 2901-15, Rev B, Tank Capacity Curves

Coast Guard Drawing 400 WAGB 2901-16, Rev B, Tank Capacity Tables

Coast Guard Drawing 400-WAGB 2906-1, Rev E, Structural Welding Design & Sequence

Coast Guard Drawing 400-WAGB 3802-1, Rev M, Arrg of Steam Heat 02 Lvl & Abv

Coast Guard Drawing 400-WAGB 3802-2, Rev AA, Arrg Steam Heat 01 Lvl & Blw Fwd

Coast Guard Drawing 400-WAGB 3802-3, Rev AF, Arrg Steam Heat 01 Lvl & Blw Aft 113

Coast Guard Drawing 400-WAGB 3802-7, Rev -, Diag Stm Heat & Condensate System (POLAR

STAR)

Coast Guard Drawing 400-WAGB 4000-2, Rev F, Machinery & Piping Standard Arrg

Coast Guard Drawing 400-WAGB 4800-10, Rev U, Arrgt of Hydraulic

Coast Guard Drawing 400-WAGB 4803-1, Rev AA, Arrgt of Firemain 3rd Dk & Below

Coast Guard Drawing 400-WAGB 4803-9, Rev U, Diag of Flushing & Sprinkling Sys

Coast Guard Drawing 400-WAGB 4804-7, Rev L, Diag of H&C Potable Wtr Sys

Coast Guard Drawing 400-WAGB-4808-14, Rev S, Arr San Fl 2nd Dk AFT Fr 113

Coast Guard Drawing 400-WAGB-4808-17, Rev C, Operating Diagram for Plumbing and Interior Deck Drains

Coast Guard Drawing 400-WAGB 4823-1, Rev D, Seachest & Strain Compts Fwd

Coast Guard Drawing 400-WAGB 4823-2, Rev H, Seachest & Strain Compts Aft

Coast Guard Drawing 400-WAGB 4901-8, Rev P, Diag of Compress Air Sys, Ship Serv

Coast Guard Drawing 400-WAGB 4901-50, Rev Rip-POI For Compressed Air System

Coast Guard Drawing 400-WAGB 5101-1, Rev G, Arrgt & Dets of Boiler

Coast Guard Drawing 400-WAGB 5101-2, Rev F, Safety Valve Easing Gear

Coast Guard Drawing 400-WAGB 5101-3, Rev AC, Arrgt of Steam Boil Blow Escape

Coast Guard Drawing 400-WAGB 5101-4, Rev J, Arrgt of Dets of Condensate Drn Tnk

Coast Guard Drawing 400-WAGB 5101-5, Rev F, Diag of Steam Boil Blow & Escape

Coast Guard Drawing 400-WAGB 5101-6, Rev N, Arrgt & Dets Boil Feedwtr Tank

Coast Guard Drawing 400-WAGB 5101-7, Rev 1, Marine Aux Boiler-Bare Boiler Design Arrgts

Coast Guard Drawing 400-WAGB 5501-6, Rev AD, Arrgt of Diesel Oil Transfer Pipg

Coast Guard Drawing 400-WAGB 5501-7, Rev U, Arrgt of Diesel Oil Transfer Pipg Aft Fr 143 Abv Tank Top

Coast Guard Drawing 400-WAGB 6202-40, Rev N, Central Hyd Sys E & IWD

Coast Guard Drawing 400-WAGB 7802-2, Rev E, Elevators Elem WD

Coast Guard Drawing 400-WAGB 8700-1, Rev W, Arrgt of Tank Level Ind

Coast Guard Drawing 400-WAGB 1500-3, Rev -, Tank Level Indicator Sys

Coast Guard Drawing 400 WAGB 6504-5, Rev G, CO2 Release Alarm Sys Ckt FR-E+IWD

Coast Guard Drawing 400-WAGB 6505-15, Rev A, Operating Procedure Tank LVL IND

Coast Guard Fleet Drawing FL 2804-12, Rev -, U.S.C.G. Emblem

Coast Guard Fleet Drawing FL 2804-22, Rev-, Consolidated Visual ID for Cutters

Coast Guard Drawing 400-WAGB 4803-1-AA Mark-Up

Coast Guard Drawing 400-WAGB 4803-2-P Mark-Up viii (Draft-0)

Coast Guard Drawing 400-WAGB 4803-7-U Mark-Up

Coast Guard Drawing 400-WAGB 4803-9-U Mark-Up

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M6240.5, 10/10/1999; Water Supply and

Waste Water Disposal Manual

Coast Guard Commandant Instruction (COMDTINST) M6260.16, Feb 1996, Asbestos Exposure Control Manual

Coast Guard Commandant Instruction (COMDTINST) M9000.6, Mar 2011, Naval Engineering Manual

Coast Guard Commandant Instruction (COMDTINST) M10360.3D, Jan 2014, Coatings and Colors Manual

Coast Guard Technical Publication (TP) 1994A, 13-MAY-99, Ship Information Book - Piping, Ventilation, Heating and Air Conditioning System

Coast Guard Technical Publication (TP) 1994B, 13-MAY-99, Ship Information Book - Piping, Ventilation, Heating and Air Conditioning System

Coast Guard Technical Publication (TP) 2029, Manufacturer's Instruction Book - SWBS Group(s) 243-262

Coast Guard Technical Publication (TP) 2032, Manufacturer's Instruction Book - SWBS Group(s)

Coast Guard Technical Publication (TP) 2033, Manufacturer's Instruction Book-SWBS Group(s) 503-510

Coast Guard Technical Publication (TP) 2034, Manufacturer's Instruction Book - SWBS Group(s) 511-514

Coast Guard Technical Publication (TP) 2035, Manufacturer's Instruction Book - SWBS Group(s) 516-521

Coast Guard Technical Publication (TP) 2037, Manufacturer's Instruction Book - SWBS Group(s) 540-588

Coast Guard Technical Publication (TP) 2038, Manufacturer's Instruction Book - SWBS Group(s) 625-651

Coast Guard Technical Publication (TP) 2042, Manufacturer's Instruction Book - SWBS Group(s) 665-985

Coast Guard Technical Publication (TP) 3102, Manufacturer's Instruction Book-SWBS Group(s) 313-332

Coast Guard Technical Publication (TP) 4391, Manufacturer's Instruction Book-SWBS Group(s) 235-241

Coast Guard Technical Publication (TP) 4395, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4411, Manufacturer's Instruction Book-SWBS Group(s)

Coast Guard Technical Publication (TP) 4668, 29-NOV-07, Miranda Davit - Model Mrt 3900

Coast Guard Technical Publication (TP) 4978, Telescoping Boom Crane, Model T60-60

Coast Guard Technical Publication (TP) 4979, 20-JAHN-2012, Knuckle Boom Model K280-70

Coast Guard Technical Publication (TP) 4986, Modified Controllable Pitch Propeller System

Coast Guard Technical Publication (TP) 4989, 24-JUN-11, Main Reduction Gear Drives

Coast Guard Technical Publication (TP) NAVSHIPS 0965_LP_060, Tank Level Indicator (TLI) System Panel

MPC Card R-A-1570 Weigh CO2 Cyl, Test Delay & Cables/Fixed CO2 System ix (Draft-0)

MPC Card R-S-1646 Inspect Fixed CO2 System and Alarms/Fixed CO2 System

MPC Card R-A-1574 Inspect/Weigh CO2 Cylinders/CO2 Hose Reel System

MPC Card R-A-1575 Weigh Halon Cylinders/Halon System

MPC Card R-A-1578 Test CO2 Actuation Station /OVA/PVA/Halon System

MPC Card R-S-1641 Weight 5 lb CO2 Cyl and Siren/Halon System

MPC Card R-A-1572 Check Liquid Level/Halon System

MPC Card R-A-1571 Test System and Replace Fusible Link/Range Guard

MPC Card R-A-1567 Test Range Guard Pressure Switch/Range Guard

MPC Card R-A-8843 Service Range Guard

MPC Card R-A-8534 Galley Fire Suppression System Inspection and Test/Range Guard

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General Requirements

Surface Forces Logistics Center Standard Specification 0085 (SFLC Std Spec 0085), 2014, General Requirements for Drawing Preparation

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2014, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2014, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, And Installation

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2014, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2014, Clean Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2014, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2014, Install Interior Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2014, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2014, Temporary Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2014, Temporary Hull Accesses

Surface Forces Logistics Center Technical Standard (SFLC Tech Standard) 583-2, Jul 2013, Shipboard Boat Hoisting Systems

Surface Forces Logistics Center Technical Standard (SFLC Tech Standard) 583-3, Jul 2013, Boat Cradles and Lifting Appliances

Surface Forces Logistics Center Technical Standard 589 (SFLC Technical Std 589), Jan 2014, Cranes

Surface Forces Logistics Center Technical Standard (SFLC Tech Standard) 613, Jun 2013, Wire rope, Synthetic Rope, and Rigging

OTHER REFERENCES

Allis Chalmers Corporation (DWG) 9024-H-1, Outer Oil Pipe Detail (Wing Shaft)

Allis Chalmers Corporation (DWG) 9024-J-2, Outer Oil Pipe Assy (Center Shaft) x (Draft-0)

Allis-Chalmers Corporation (DWG) 9025-AG-3, Spacer Ring Rev.( 02)

Allis Chalmers Corporation (DWG) 9024-F-1; Outer Oil Pipe Detail (Center Shaft)

Allis Chalmers Corporation (DWG) 9016-T-3; Dowel Pin American National Standards Institute (ANSI/ASA) S2.19, 2004, Mechanical Vibration - Balance Quality

Requirements of Rigid Rotors - Part 1: Determination of Permissible Residual Unbalance

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2011, Disinfection of Water-Storage Facilities

American National Standards Institute (ANSI/EASA) AR100, 2006, Recommended Practice for the Repair of Rotating Electrical Apparatus

American National Standards Institute/NSF International (ANSI/NSF) 61, 2013, Drinking Water System Components - Health Effects

American Society of Mechanical Engineers (ASME) B16.34, 2013, Valves-Flanged, Threaded, and Welding End

ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by Tape Test

ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

ASTM International (ASTM) F683, 2010, Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

ASTM International (ASTM) F992, 2011, Standard Specification for Valve Label Plates

Code of Federal Regulations (CFR) Title 29, Part 1915, Section 15, 2007, Shipyard Employment

Code of Federal Regulations (CFR) Title 46, Part 61.05, 2013, Tests and Inspections of Boilers

CFR Title 49 Part 173.34 Halon 1301 Fixed Cylinders

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Anti-seize, Zinc Dust- Petrolatum

DE - 319 (DWG), Shaft Handling Gear Concept

DE - 320 (DWG), Propeller Handling Gear Concept

DE - 321 (DWG), Outline of Tractor

Elwell-Parker, Information and Troubleshooting Guide

Elwell-Parker, Operating and Maintenance Manual Vols. I & II

Elwell-Parker GM4VH, Operating Instruction and Service Manual

Federal Specification (Fed Spec) DDD-C-95, Mar 1972, Carpets and Rugs, Wool, Nylon, Acrylic, Modacrylic

Federal Standard (FED-STD) 595, 2008, Colors Used In Government Procurement

Hayward Industrial Products, Inc. Operating Instructions Model 570 Pipeline Strainer, 4/14/09

International Standard Organization (ISO) 4406, 7/13/2004; Hydraulic Fluid Power -- Fluids -- Method for Coding the Level of Contamination by Solid Particles

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2013 Edition, Pressure Testing Of Steel Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2011 Edition, Butterfly Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS), SP-58, 2009, Pipe Hangers and Supports – Materials, Design, Manufacture, Selection, Application and Installation

MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418)

MIL-A-22262, Mar 1996; Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-D-16791, Jan 1993, Detergents, General Purpose (Liquid, Nonionic)

MIL-G-24716, Apr 1993, Gaskets, Metallic-Flexible Graphite, Spiral Wound

MIL-PRF-1149, Jun 1998, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer xi (Draft-0)

MIL-PRF-24176C, Oct 2004, Cement, Epoxy, Metal Repair and Hull Smoothing

MIL-PRF-24613, Dec 1990, Deck Covering Materials, Interior, Cosmetic Polymeric

MIL-PRF-24667C, May 2008, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application

MIL-STD-777, Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation For Compartments Installation Details

Naval Sea Systems Command (NAVSEA) Standard Item 009-31, July 2011, Boiler Waterjet Cleaning

Naval Sea Systems Command (NAVSEA) Technical Directive S6430-AE-TED-010 Piping Devices, Flexible Hose Assemblies

Naval Sea Systems Command (NAVSEA) T9074-AS-GIB-010/271, Apr 1997, Requirements for Nondestructive Testing Methods

Naval Ships’ Technical Manual (NSTM) Ch 221, May 2010, Boilers

Naval Ship's Technical Manual (NSTM) Chapter 243, May 2006, Propulsion Shafting

Naval Ships’ Technical Manual (NSTM) Ch 244, 2011, Propulsion Bearings and Seals

Naval Ships’s Technical Manual (NSTM) Ch 505, 2001, Piping Systems

Naval Ships’ Technical Manual (NSTM) 541, 2007, Ship Fuel and Fuel Systems

Naval Ships' Technical Manual, Chapter 556, Hydraulic Equipment Power Transmission and ControlNaval Ships’ Technical Manual (NSTM) 541, 2007, Ship Fuel and Fuel Systems

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032, 2014 Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

Society Of Naval Architects and Marine Engineers (SNAME) T&R 3-47; "Guide for Sea Trials"

STANDARD SERVICE MODULE 131-106-004 Polar Class Re-installation of Hayward Strainers

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.2 (SSPC-SP 2), 2004, Hand Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2012, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC), May 2012, Paint Application Specification No. 2 (PA-2), Measurement of Dry Coating Thickness with Magnetic Gages

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-2/NACE WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 12/NACE No. 5, Surface Preparation and Cleaning of Steel & Other Hard Materials by High and Ultrahigh Pressure Water Jetting Prior to Recoating

The Society for Protective Coatings (SSPC) Surface Preparation Standard SSPC-SP 15, Commercial Grade Power Tool Cleaning

Thordon Double Key XL Bearing Installation Manual 10 May 2006

Thordon XL Double Key Bearing Assembly DWG No. TG-17321 (Thordon Bearing Inc.)

Thordon XL Double Key Bearing Carrier DWG No. TG-17344 (Thordon Bearing Inc.)

26 (Draft-0)

55500_0814_FLT

REC_55500_FLT_400’ WAGB (ALL) (0609)

WORK ITEM 5: Fixed CO2 and Halon FF Bottles, Inspect and Hydrostatic Test

1. SCOPE

1.1 Intent. This work item describes the requirements for the Contractor to perform the annual certification of the fixed CO2 and Halon fire suppression systems and to weigh the bottles.

Halon Pilot Cylinders Installed CO2 Halon Cylinders

Location Serial # Test Date Location Serial # Test Date Location Serial # Test Date

3‐155‐0‐E 41642 06/2009 5‐113‐0‐E 6529 10/2005 2‐113‐6‐Q 43123 9/2012E

3‐155‐0‐E 21101 06/2009 5‐113‐0‐E 30493 10/2005 2‐113‐6‐Q 43050 9/2012E

3‐155‐0‐E 7547 06/2009 5‐113‐0‐E 30516 10/2005 2‐113‐6‐Q 43337 9/2012E

3‐155‐0‐E 41573 06/2009 5‐113‐0‐E 6370 10/2005 2‐113‐6‐Q 43042 9/2012E

3‐155‐0‐E 7542 06/2009 5‐113‐0‐E 30344 10/2005 2‐113‐6‐Q 43098 9/2012E

3‐155‐0‐E 41541 06/2009 5‐113‐0‐E 30533 10/2005 2‐113‐6‐Q 42975 9/2012E

3‐155‐0‐E 41519 06/2009 1‐N‐0‐K 6158 10/2005 2‐113‐6‐Q 43087 9/2012E

2‐132‐2‐Q 21100 06/2009 1‐N‐0‐K 30522 10/2005 2‐113‐6‐Q 42980 9/2012E

2‐132‐2‐Q 41514 06/2009 1‐N‐0‐K 30508 10/2005 2‐113‐6‐Q 43120 9/2012E

2‐132‐2‐Q 7475 06/2009 1‐N‐0‐K 6656 09/2012 2‐113‐6‐Q 43083 9/2012E

2‐132‐2‐Q 21023 06/2009 3‐197‐0‐AA 30523 10/2005 2‐113‐6‐Q 43045 9/2012E

2‐132‐2‐Q 21012 06/2009 3‐197‐0‐AA 6712 10/2005 2‐113‐6‐Q 43056 9/2012E

2‐132‐2‐Q 41653 06/2009 3‐197‐0‐AA 6580 10/2005 2‐113‐6‐Q 43229 9/2012E

2‐132‐2‐Q 41591 06/2009 3‐197‐0‐AA 30486 10/2005 2‐113‐6‐Q 43430 9/2012E

2‐113‐6‐Q 41742 06/2008 3‐197‐0‐AA 30509 10/2005 2‐113‐6‐Q 42981 9/2012E

2‐113‐6‐Q 41495 06/2008 3‐197‐0‐AA 6695 10/2005 2‐113‐4‐L 43561 7/2014E

2‐113‐6‐Q 41499 06/2009 3‐197‐0‐AA 30485 10/2005 2‐113‐4‐L 43476 6/2015E

2‐113‐6‐Q 41655 06/2009 3‐197‐0‐AA 30390 10/2005 2‐113‐4‐L 43102 9/2013E

2‐113‐6‐Q 21121 06/2009 1‐E‐0‐E 30504 10/2005 2‐113‐4‐L 43080 9/2012E

2‐113‐6‐Q 21147 06/2009 1‐E‐0‐E 30549 10/2005 2‐113‐4‐L 42991 9/2012E

2‐113‐6‐Q 21132 06/2009 1‐E‐0‐E 30577 10/2005 2‐113‐4‐L 43504 9/2012E

2‐113‐6‐Q 21104 06/2009 1‐E‐0‐E 30551 10/2005 2‐113‐4‐L 43084 9/2013E

3‐171‐0‐E 21144 06/2008 1‐E‐0‐E 6706 09/2012 3‐171‐0‐E 39944 9/2012E

CO2 Hose Reel 1‐E‐0‐E 30498 09/2012 3‐171‐0‐E 39983 7/2014E

Location Serial # Test Date 1‐E‐0‐E 6585 09/2012 CO2 Siren Cylinders

3‐57‐0‐E 30494 10/2005 1‐E‐0‐E 6742 10/2005 Location Serial # Test Date

3‐57‐0‐E 30536 10/2005 1‐E‐0‐E 30524 10/2005 5‐57‐0‐E 256810 06/2009

3‐85‐0‐E 30518 10/2005 1‐E‐0‐E 30501 10/2005 5‐57‐0‐E 256811 06/2009

3‐85‐0‐E 30538 10/2005 1‐E‐0‐E 30475 10/2005 5‐85‐0‐E 256817 06/2009

3‐121‐0‐E 6427 10/2005 1‐E‐0‐E 6142 06/2015 5‐85‐0‐E 256761 06/2009

3‐121‐0‐E 30540 10/2005 1‐E‐0‐E 4639 06/2015 5‐113‐0‐E 256802 06/2009

2‐128‐2‐L 30520 10/2005 1‐E‐0‐E 30557 10/2005 5‐113‐0‐E 256803 06/2009

2‐128‐2‐L 30512 10/2005 1‐E‐0‐E 6325 09/2013 3‐143‐6‐Q 256793 06/2009

3‐155‐0‐E 30404 10/2005 1‐E‐0‐E 6599 09/2013 3‐143‐3‐Q 256799 06/2009

3‐155‐0‐E 6714 10/2005 1‐E‐0‐E 30383 09/2013

1‐E‐0‐E 30521 10/2005

1‐E‐0‐E 6256 10/2005

1‐E‐0‐E 30489 06/2015

1‐E‐0‐E 6551 06/2015

1‐E‐0‐E 30568 06/2015

1‐E‐0‐E 30505 06/2015

30 (Draft-0)

3.4.2.3 Inspect and weigh each of the CO2 bottles, including the spare CO2 bottles in the Anchor Windlass Room.

3.4.2.3.1 Hydrostatically test the cylinders in the following locations:

# of Cylinders Location

4 1-N-0-K

8 Lower Cargo

6 5-113-0-E

3.4.2.3.2 Note the date when each CO2 cylinder was last hydrostatically tested and note the next test date required for each cylinder in the CFR.

3.4.2.4 Remove each of the time delay relays from the system, bench test to OEM requirements.

Install the tested time delay relays back in to the system and test the system.

3.4.2.5 Inspect and test the automatic and manual release mechanisms on all fixed CO2 Systems.

3.4.2.6 Inspect the discharge heads on each cylinder and the high pressure flexible discharge hose assemblies.

3.4.2.6.1 Replace the following flex hoses:

HOSE

NUMBER

LOCATION ASSOCIATED ASSEMBLY

FE-CO2-075 2-113-6-Q CO2 Actuation (2-116-4) FE-CO2-076 2-113-6-Q CO2 Actuation (2-115-4) FE-CO2-078 5-113-0-E CO2 Discharge Fire Extinguish Alarm FE-CO2-102 3-197-0-AA CO2 Discharge To Alarm/Siren L/L FE-CO2-103 5-57-0-E CO2 Actuation U/L FE-CO2-104 3-197-0-AA CO2 Discharge To Alarm/Siren U/L FE-CO2-105 5-171-0-E CO2 Actuation U/L FE-CO2-106 5-171-0-E CO2 Discharge L/L FE-CO2-110 5-85-0-E CO2 Discharge To Alarm/Siren FE-CO2-111 3-57-0-E CO2 Discharge FE-CO2-112 3-57-0-E CO2 Discharge FE-CO2-113 3-143-0-E CO2 Discharge FE-CO2-114 3-143-0-E CO2 Discharge

3.4.2.7 Test operation of all associated electrical circuits including alarm circuits and ventilation shut-downs. See CG Dwg 400 WAGB 6504-5.

3.4.2.8 Blow out all disturbed piping with air to make sure it is free flowing.

3.4.2.9 Attach a metal tag indicating installation date on each flex hose that is replaced.3.4.2.10 Restore the affected CO2 systems.

96 (Draft-0)

S_50500_ESD_0515_SWIT

SYY_LLNNN_50500_AUT_MMYY_HULL#

WORK ITEM 19: Flex Hose Assemblies, Renew

1. SCOPE

1.1 Intent. This work item describes the requirements for the Contractor to renew hose assemblies identified in Table 1.

TABLE 1 – HOSE PARTICULARS

Item # Hose # Location System Length Size Fitting Type Fitting Material Op PSI

1 1AB‐F/O‐001 5‐113‐0‐E Fuel Oil 38" 1/2" STR ‐8 female JIC, both ends, crimp S/S 100 psi

2 1DOP‐OIL‐001 5‐57‐0‐E Fuel Oil 8" 1" / ‐16 STR 1" male NPT to 90 deg ‐16 female JIC, crimp S/S 100 psi

3 1DOP‐OIL‐002 5‐57‐0‐E Fuel Oil 24" 1" / ‐16 STR ‐16 female JIC, both ends, crimp S/S 100 psi

4 1DOP‐OIL‐003 5‐57‐0‐E Fuel Oil 14" 1/4" / ‐4 STR ‐4 female JIC, both ends, crimp S/S 100 psi

7 1SSA‐A‐002 3‐121‐0‐E Ship Service Air 45" 1 1/2" STR 1 1/2" Male NPT, welded, both ends Steel 150 psi

8 1SSA‐A‐003 3‐121‐0‐E Ship Service Air 48" 1 1/2" STR 1 1/2" Male NPT, welded, both ends Steel 150 psi

9 1SSA‐A‐004 3‐121‐0‐E Ship Service Air 38" 2" STR 2" Male NPT to OEM 4 Bolt Square Flange. Steel 150 psi

10 1SSA‐L/O‐001 3‐121‐0‐E Lube Oil 41" ‐16 STR ‐16 JIC, Renewable, both ends S/S 150 psi

11 1SSA‐L/O‐002 3‐121‐0‐E Lube Oil 61" ‐16 STR ‐16 JIC to 90 deg elbow ‐16 JIC, Renewable, both ends S/S 150 psi

12 1SSA‐L/O‐003 3‐121‐0‐E Lube Oil 21" ‐16 STR ‐16 JIC to 90 deg elbow ‐16 JIC, Renewable, both ends S/S 150 psi

13 1SSA‐L/O‐004 3‐121‐0‐E Lube Oil 26" ‐12 STR ‐12 JIC to 90 deg elbow ‐12 JIC, Renewable, both ends S/S 150 psi

14 2DOP‐OIL‐001 5‐85‐0‐E Fuel Oil 8" 1" / ‐16 STR 1" male NPT to 90 deg ‐16 female JIC, crimp S/S 100 psi

15 2DOP‐OIL‐002 5‐85‐0‐E Fuel Oil 24" 1" / ‐16 STR ‐16 female JIC, both ends, crimp S/S 100 psi

16 2DOP‐OIL‐003 5‐85‐0‐E Fuel Oil 32" 1/4" / ‐4 STR ‐4 female JIC, both ends, crimp S/S 100 psi

17 2DOP‐OIL‐004 5‐85‐0‐E Fuel Oil 14" 1/4" / ‐4 STR ‐4 female JIC, both ends, crimp S/S 100 psi

21 2SSA‐A‐001 3‐121‐0‐E Ship Service Air 27.5" 2" STR 2" Male NPT, Renewable, both ends Brass 150 psi

22 2SSA‐A‐002 3‐121‐0‐E Ship Service Air 45" 1 1/2" STR 1 1/2" Male NPT, welded, both ends Steel 150 psi

23 2SSA‐A‐003 3‐121‐0‐E Ship Service Air 48" 1 1/2" STR 1 1/2" Male NPT, welded, both ends Steel 150 psi

24 2SSA‐A‐004 3‐121‐0‐E Ship Service Air 38" 2" STR 2" Male NPT to OEM 4 Bolt Square Flange. Steel 150 psi

25 2SSA‐L/O‐001 3‐121‐0‐E Lube Oil 41" ‐16 STR ‐16 JIC, Renewable, both ends S/S 150 psi

26 2SSA‐L/O‐002 3‐121‐0‐E Lube Oil 61" ‐16 STR ‐16 JIC to 90 deg elbow ‐16 JIC, Renewable, both ends S/S 150 psi

27 2SSA‐L/O‐003 3‐121‐0‐E Lube Oil 21" ‐16 STR ‐16 JIC to 90 deg elbow ‐16 JIC, Renewable, both ends S/S 150 psi

28 2SSA‐L/O‐004 3‐121‐0‐E Lube Oil 26" ‐12 STR ‐12 JIC to 90 deg elbow ‐12 JIC, Renewable, both ends S/S 150 psi

97 (Draft-0)

Item # Hose # Location System Length Size Fitting Type

Fitting Material Op PSI

31 EDG‐F/O‐001 02‐119‐0‐E Fuel Oil 42" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends

S/S 100 psi

32 EDG‐F/O‐002 02‐119‐0‐E Fuel Oil 13" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

33 EDG‐F/O‐003 02‐119‐0‐E Fuel Oil 48" ‐10 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

34 EDG‐F/O‐004 02‐119‐0‐E Fuel Oil 68" ‐8 90 deg elbow SAE Male Inverted Flare to 45 deg Female ORS Swivel‐ Crimp Fittings S/S 100 psi

35 EDG‐F/O‐005 02‐119‐0‐E Fuel Oil 20" ‐8

45 deg SAE Male Inverted Flare to STR Female ORS Swivel‐ Crimp Fittings S/S 100 psi

36 EDG‐F/O‐006 02‐119‐0‐E Fuel Oil 140" ‐10 STR ‐10 female JIC Crimp Fitting Both Ends S/S 100 psi

37 EDG‐F/O‐007 02‐119‐0‐E Fuel Oil 15" ‐10 STR ‐10 female JIC Crimp Fitting Both Ends S/S 100 psi

38 EDG‐L/O‐013 02‐119‐0‐E Lube Oil 14" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

39 EDG‐L/O‐014 02‐119‐0‐E Lube Oil 48" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

40 EDG‐L/O‐015 02‐119‐0‐E Lube Oil 14" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

41 EDG‐F/O‐011 02‐119‐0‐E Fuel Oil 14" ‐24 90 deg 1" 150 lb flange to STR 1" 150 ls flange Brass 100 psi

42 EDG‐F/O‐012 02‐119‐0‐E Fuel Oil 132" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

43 EDG‐F/O‐013 02‐119‐0‐E Fuel Oil 108" ‐10 STR ‐10 female JIC Crimp Fitting Both Ends S/S 100 psi

44 EDG‐J/W‐001 02‐119‐0‐E Jacket Water 75" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

45 EDG‐J/W‐002 02‐119‐0‐E Jacket Water 78" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

46 EDG‐J/W‐003 02‐119‐0‐E Jacket Water 105" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

47 EDG‐J/W‐004 02‐119‐0‐E Jacket Water 84" ‐12 STR ‐12 JIC Crimp Fitting Both Ends S/S 100 psi

48 EDG‐J/W‐005 02‐119‐0‐E Jacket Water 81" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

49 EDG‐J/W‐006 02‐119‐0‐E Jacket Water 48" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

50 EDG‐J/W‐007 02‐119‐0‐E Jacket Water 42" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

51 EDG‐L/O‐001 02‐119‐0‐E Lube Oil 104" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

52 EDG‐L/O‐002 02‐119‐0‐E Lube Oil 32" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

53 EDG‐L/O‐003 02‐119‐0‐E Lube Oil 10" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

54 EDG‐L/O‐004 02‐119‐0‐E Lube Oil 86" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

55 EDG‐L/O‐005 02‐119‐0‐E Lube Oil 105" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

56 EDG‐L/O‐006 02‐119‐0‐E Lube Oil 160" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

57 EDG‐L/O‐007 02‐119‐0‐E Lube Oil 20" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

58 EDG‐L/O‐008 02‐119‐0‐E Lube Oil 50" ‐4 STR ‐4 female JIC Crimp Fitting Both Ends S/S 100 psi

59 EDG‐L/O‐009 02‐119‐0‐E Lube Oil 22" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

60 EDG‐L/O‐010 02‐119‐0‐E Lube Oil 40" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

61 EDG‐L/O‐011 02‐119‐0‐E Lube Oil 16" ‐24 STR 1" 150 lb flange to STR 1" 150 ls flange Brass 100 psi

62 EDG‐L/O‐012 02‐119‐0‐E Lube Oil 15.5" ‐24 STR 1" 150 lb flange to STR 1" 150 ls flange Brass 100 psi

63 FE‐MS‐001 2‐197‐0‐AA Fire Main 43" ‐8 STR ‐8 JIC, Renewable, both ends S/S 200 psi

64 FE‐MS‐002 2‐197‐0‐AA Fire Main 43" ‐8 STR ‐8 JIC, Renewable, both ends S/S 200 psi

69 L‐STM‐006 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

70 L‐STM‐007 1‐18‐1‐Q Steam 22 ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

98 (Draft-0)

Item # Hose # Location System Length Size Fitting Type Fitting Material Op PSI

L‐STM‐005 1‐18‐1‐Q Steam 22" 3/8" Flare tube connection both ends Brass

100 psi / 300 deg F

79 L‐STM‐008 1‐18‐1‐Q Steam 22" 3/8" Flare tube connection both ends Brass 100 psi / 300 deg F

80 L‐STM‐009 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

81 L‐STM‐010 1‐18‐1‐Q Steam 18" 3/8" Flare tube connection both ends Brass 100 psi / 300 deg F

82 L‐STM‐011 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

83 L‐STM‐012 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

84 L‐STM‐013 1‐18‐1‐Q Steam 22" 3/8" Flare tube connection both ends Brass 100 psi / 300 deg F

85 L‐STM‐014 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

86 L‐STM‐015 1‐18‐1‐Q Steam 22" ‐4 STR 1/4 Male NPT to STR ‐4 JIC , Crimp both ends Copper 100 psi / 300 deg F

87 L‐STM‐016 1‐18‐1‐Q Steam 22" 3/8" Flare tube connection both ends Brass 100 psi / 300 deg F

99 R2‐S/W‐001 2‐35‐1‐Q Sea Water 13" ‐24 STR Female JIC, both emds. Reusable Brass 50 psi

100 R2‐S/W‐002 2‐35‐1‐Q Sea Water 13" ‐24 STR Female JIC, both emds. Reusable Brass 50 psi

101 1AREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

102 1BREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

103 2AREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

104 2BREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

105 3AREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

106 3BREF‐R‐001 3‐57‐0‐E Refrigerant 12.5" 1" Brazed, both ends (S/S braided wrap) Ni‐Cu 250 psi

107 SA‐A‐001 3‐121‐0‐E Start Air 41" ‐20 STR 1 1/4" NPT to STR ‐20 JIC, Crimp S/S 250 psi

108 SA‐A‐002 3‐121‐0‐E Start Air 41" ‐20 STR 1 1/4" NPT to STR ‐20 JIC, Crimp S/S 250 psi

109 SA‐A‐003 3‐121‐0‐E Start Air 41" ‐20 STR 1 1/4" NPT to STR ‐20 JIC, Crimp S/S 250 psi

110 1AB‐F/O‐002 5‐113‐0‐E Fuel Oil 56" 1/2" STR ‐8 female JIC, both ends, crimp S/S 100 psi

111 1AB‐F/O‐003 5‐113‐0‐E Fuel Oil 27" 1/2" STR ‐8 female JIC, both ends, crimp S/S 100 psi

112 1SSA‐A‐001 3‐121‐0‐E Ship Service Air 28" 2" STR 2" Male NPT, Renewable, both ends Brass 150 psi

113 2AB‐F/O‐001 5‐113‐0‐E Fuel Oil 38" 1/2" STR ‐8 female JIC, both ends, crimp S/S 100 psi

114 2AB‐F/O‐002 5‐113‐0‐E Fuel Oil 54" 1/2" STR ‐8 female JIC to 90 deg ‐8 female JIC, crimp S/S 100 psi

115 2AB‐F/O‐003 5‐113‐0‐E Fuel Oil 27" 1/2" STR ‐8 female JIC, both ends, crimp S/S 100 psi

116 EDG‐F/O‐008 02‐119‐0‐E Fuel Oil 138" ‐12 STR ‐12 female JIC Crimp Fitting Both Ends S/S 100 psi

117 R2‐S/W‐001 2‐35‐1‐Q Sea Water 13" ‐24 STR Female JIC, both emds. Reusable Brass 50 psi

118 R2‐S/W‐002 2‐35‐1‐Q Sea Water 13" ‐24 STR Female JIC, both emds. Reusable Brass 50 psi

119 1SSA‐L/O‐007 3‐121‐0‐E Sea Water 33" ‐6 STR ‐6 JIC, Renewable, both ends S/S 150 psi

120 1SSA‐S/W‐001 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

121 1SSA‐S/W‐002 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

122 1SSA‐S/W‐003 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

123 2SSA‐L/O‐007 3‐121‐0‐E Sea Water 33" ‐6 STR ‐6 JIC, Renewable, both ends S/S 150 psi

124 2SSA‐S/W‐001 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

125 2SSA‐S/W‐002 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

126 2SSA‐S/W‐003 3‐121‐0‐E Sea Water 37" ‐16 STR ‐16 JIC, Renewable, both ends Brass 150 psi

99 (Draft-0)

*Hoses to be selected IAW NAVSEA S6430-AE-TED-010 or SAE J 1942

1.2 Government-furnished property.

None.

2. REFERENCES

COAST GUARD DRAWINGS

None

COAST GUARD PUBLICATIONS

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General Requirements

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2014, Auxiliary Machine Systems\

Coast Guard Commandant Instruction COMDTINST M9000.6F, 2011, Naval Engineering Manual (NEM)

OTHER REFERENCES

Naval Sea Systems Command (NAVSEA) Technical Directive S6430-AE-TED-010

Piping Devices, Flexible Hose Assemblies

3. REQUIREMENTS

3.1 General.

3.1.1 CIR.

None.

3.1.2 Tech Rep.

Not Applicable.

3.1.3 Protective measures. The Contractor shall furnish and install suitable covering to seal off and protect all non-affected surfaces/equipment and spaces in the vicinity of the work area against contamination during the performance of work. Upon completion of work, remove protective material and inspect for the presence of contamination. Clean all equipment and spaces, contaminated due to improper protection, to original condition of cleanliness.

193 (Draft-0)

Naval Ships' Technical Manual, Chapter 556, Hydraulic Equipment Power Transmission and Control

NAVSEA T9074-AS-GIB-010/271, Requirements for Non-Destructive Testing Methods

Code of Federal Regulations (CFR) Title 29, Part 1915, Section 15, 2007, Shipyard Employment

3. REQUIREMENTS

3.1 General.

3.1.1 CIR.

None.

3.1.2 Tech Rep.

Not applicable.

3.1.3 Protective measures. The Contractor shall furnish and install suitable covering to seal off and protect all non-affected surfaces/equipment and spaces in the vicinity of the work area against contamination during the performance of work. Upon completion of work, remove protective material and inspect for the presence of contamination. Clean all equipment and spaces, contaminated due to improper protection, to original condition of cleanliness.

3.1.4 Interferences. The Contractor shall handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences).

3.1.5 General Description, Polar Class Ice Breaker, Propeller and Shaft Handling Equipment.

The equipment consists of three major components: a tractor, a propeller handling pallet, and a shaft-handling trailer. A general description of each component follows:

Tractor: The tractor is a diesel electric powered industrial lift truck. The arrangement of the tractor is depicted in drawing DE-321; "Outline of Tractor". Hydraulic power for the tractor lift platform, the propeller pallet and shaft trailer is supplied by a common hydraulic system on the tractor and is powered by a pump driven by the tractor generator. The tractor is self-propelled and moves at a speed of approximately two-miles per hour. The tractor has a lift capacity of 120,000-pounds. Extreme caution should be exercised when maneuvering the tractor on any incline. Approximate dimensional data follows: weight = 73,800-lbs., length = 21.75-ft, width = 8.00-ft, and height = 12.00-ft.

Propeller Pallet: The propeller pallet is a platform with two hydraulically positionable uprights with bearing saddles contoured to fit the Polar Class Icebreaker propeller hubs. Both uprights have axial, transverse and vertical degrees of freedom. Rollers in the saddles permit manual rotation of propellers while in the saddles. The saddles may be interchanged between uprights or removed entirely to permit use of other saddles fitting propellers of smaller size. The unit is not powered and must be used in conjunction with the tractor defined above, both for transportation (on the tractor lifting platform) and for hydraulic power to position the uprights. The propeller pallet is illustrated in drawing; "DE-320; Propeller Handling Gear Concept Drawing".