HC102811R0104 Conformed Copy AM0005.doc

Section B - Supplies or Services and Prices

CONTRACT MINIMUM/MAXIMUM

MIN/MAX

A total of five contracts will be awarded, one per chipset. The following is a breakout of the contract awards by chipset: IBM System z (IBM z/OS, IBM z/VM, Red Hat Enterprise Linux, SUSE Linux Enterprise Server); X-86 (Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Solaris, VMware); Itanium (HP-UX, HP VSE); SPARC, Solaris, Solaris10 zones and Ldoms; and IBM System p (AIX, AIX LPARS).

The minimum guaranteed contract amount will be $1M over the projected base year for all the contracts awarded. The guaranteed $1M will be divided among the contracts proportionately based on CSDs projected use of each chipset contract at the time of award.

The maximum contract(s) ceiling amount is $443M over the base and all option periods. The total amount of all delivery orders placed against all contract(s) resulting from the solicitation may not exceed the maximum contract(s) ceiling amount of $443M. There shall be no minimum guarantee for any option year.

Stated Minimum - $1M

Stated Maximum - $443M

Lot

System Z Chipset

FFP

Per SOO Paragraph 3.1.1, IBM System Z (IBM z/OS, IBM z/VM, Red Hat Enterprise Linux, SUSE Linux Enterprise Server) and Per SOO Paragraph 3.10, Racks.

Reference Atch J-6 for Pricing Model

FOB: Destination

NET AMT

Lot

X-86 Chipset

Per SOO Paragraph 3.1.2, X-86 (Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Solaris, VMware) and Per SOO Paragraph 3.10, Racks.

Reference Atch J-7 for Pricing Model

NET AMT

Lot

Itanium Chipset

Per SOO Paragraph 3.1.3, Itanium (HP-UX, HP VSE) and Per SOO Paragraph 3.10, Racks.

Reference Atch J-8 for Pricing Model

NET AMT

Lot

SPARC Chipset

Per SOO Paragraph 3.1.4, SPARC, Solaris 10 xones and Ldoms and Per SOO Paragraph 3.10, Racks.

Reference Atch J-9 for Pricing Model

NET AMT

Lot

System P

Per SOO Paragraph 3.1.5, IBM System P (AIX, AIX LPARs) and Per SOO Paragraph 3.10, Racks.

Reference Atch J-10 for Pricing Model

NET AMT

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLAUSES INCORPORATED BY REFERENCE

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.211-9200 PERIOD OF CONTRACT

(JUN 1996)

(F500 Previously) Any contract awarded as a result of an offer submitted in response to this solicitation shall be effective from date of contract award and shall continue for a period of five years with three one year options, unless sooner terminated under the terms of this contract.

CLAUSES INCORPORATED BY FULL TEXT

52.211-9201 PLACE OF PERFORMANCE

(JUN 1996)

Processor Capacity Services shall be performed to deliver processing capacity for DISA at the CSD processing facilities, CONUS, OCONUS, and other DISA or DISA approved locations worldwide in which DISA CSD may acquire an operational responsibility as shown in the SOO (Atch J-1) and Requirements Document (Atch J-2).

CLAUSES INCORPORATED BY FULL TEXT

52.216-9202

DELIVERY ORDERS

(JUN 1996)

a. Orders for processor capacity services may be placed during the Base period and Option Years One through Three (provided each applicable option year is exercised).

b. The delivery order becomes effective when the order is signed (effective date) and extends through the expiration of the current contract period. Prior to the expiration date, delivery orders may be renewed by the issuance of a new delivery order.

c. The ordering period is stated in FAR 52.216-18, Ordering, Section I. The total amount of all delivery orders placed against the contract resulting from the solicitation may not exceed the maximum contract ceiling amount of $443M. There shall be no minimum guarantee for any option year.

d. DISA/DITCO is the only activity authorized to place delivery orders against this contract. DISA/DITCO may issue Electronic Task Orders (ETOs), delivery orders, and other correspondence to cotnractor(s) via electronic mail.

e. DISA/DITCO will issue delivery orders with funding to be used for the purchase of services. Using an agreed upon call order process between the Government and the Contractor, call orders will be issued via electronic mail to order the actual services. While the contractor must invoice against the Delivery Order, the invoice must reference all applicable call orders.

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

52.201-9200 CONTRACTING AND ADMINISTRATIVE AUTHORITY

(JUN 1996)

(G500 Previously)

a. The contract will be administered by the Defense Information Technology Contracting Organization (DITCO). The Contracting Officer (CO) at DITCO is the only person authorized to approve changes or modify any of the requirements contained elsewhere in this contract; the said authority remains solely in the CO. In the event the contractor effects any such change at the direction of any other person other than the CO, the change will be considered to have been made without authority and no adjustment will be made in the contract costs to cover any increase incurred as a result thereof.

b. The contractor shall submit requests for modifications of this contract to the CO with a copy of the request to the CO's representative as designated in the CO’s representative appointment letter.

c. Contractual problems, of any nature, that may arise during the life of this contract must be handled in conformance with very specific public laws and regulations (i.e., Federal Acquisition Regulation). Only the CO is authorized to formally resolve such problems. Therefore, the contractor is hereby directed to bring all such contractual problems to the immediate attention of the CO.

d. Request for information on matters related to this contract, such as explanation of terms and contract interpretation, shall be submitted to the CO.

52.204-9000 Points of Contact (AUG 2005)

Contracting Officer

Name: Anne M. Hellman

Organization/Office Symbol: DITCO/PL8322

Phone No.: 618-229-9596

E-Mail Address: anne.hellman@disa.mil

Contract Specialist

Name: Lisa A. O’Donnell

Organization/Office Symbol: DITCO/PL8322

Phone No.: 618-229-9721

E-Mail Address: lisa.odonnell@disa.mil

Customer/COR/TM Point of Contact

Name: TO BE DETERMINED AT AWARD

Organization/Office Symbol:

Phone No.:

E-Mail Address:

Contractor Point of Contact

Contractor Legal Business Name:

DUNS:

CAGE CODE:

Contractor POC:

E-Mail Address:

Phone Number:

Fax Number:

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

52.204-9001 Contract/Order Closeout—Fixed-Price, Time-and-Materials, or Labor-Hours (Jan 2007)

Timely contract closeout is a priority under this contract/order. The Contractor shall submit a final invoice within ninety (90) calendar days after the expiration of this contract/order, unless the Contractor requests and is granted an extension by the Contracting Officer, in writing. In addition, and concurrent with the submission of the final invoice, the Contractor shall notify the Contracting Officer of the amount of excess funds that can be deobligated from this contract/order so the closeout process can begin as soon as possible upon expiration of this contract/order. A bilateral contract/order closeout modification will be forwarded to the Contractor by the Contracting Officer and must be signed by the Contractor and returned to the Contracting Officer within thirty (30) calendar days of issuance of the modification. A Contractor’s failure to respond and/or sign the bilateral closeout modification within thirty (30) calendar days of receipt will constitute approval of the terms of the modification and the modification will subsequently be processed unilaterally by the Contracting Officer to deobligate excess funds and close this contract/order.

If this contract/order contains option periods, the Contractor is required to submit an invoice within ninety (90) calendar days after expiration of the base period of performance and the expiration of each exercised option period of performance to allow for deobligation of excess funds that were obligated in those respective periods of performance.

(End of clause) 52.232-9000 Wide Area WorkFlow (WAWF)

As prescribed in 232.7004(S-90), use the following clause:

Wide Area WorkFlow (WAWF) (3 OCT 2008)

(a) As prescribed in DFARS clause 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Mar 2008), Contractors must submit payment requests in electronic form. Paper copies will no longer be accepted or processed for payment unless the conditions of DFARS clause 252.232-7003(c) apply. To facilitate this electronic submission, the Defense Information Systems Agency (DISA) has implemented the DoD sanctioned Wide Area WorkFlow (WAWF) for contractors to submit electronic payment requests and receiving reports. The contractor shall submit electronic payment requests and receiving reports via WAWF. For payment problems related to WAWF, the contractor should contact the Acceptor identified.

(b) Definitions:

Acceptor: Contracting Officer’s Representative, Task Monitor, or other government acceptance official as identified in the contract/order.

Local Processing Office (LPO): Government office responsible for certifying invoices.

Pay Official: Defense Finance and Accounting Service (DFAS) payment office identified in the contract/order.

SHIP To/Service Acceptor DoDAAC: Acceptor DoDAAC or DCMA DoDAAC (as specified in the contract/order).

LPO DoDAAC: Certifying Office DoDAAC (only required when the Payment Office DoDAAC is HQ0251 and the LPO DoDAAC field is marked as mandatory in WAWF).

DCAA Auditor DoDAAC: Used when DCAA invoice approval is required by the contract/order and the field is marked as mandatory in WAWF-RA. (Click the DCAA Audit Office Locator Link in WAWF and enter zip code of your CAGE code address).

(c) WAWF Contractor Input Information - ** IMPORTANT! **

The contractor shall use the following information in creating electronic payment requests in WAWF:

To create electronic payment requests and receiving reports, go to the following WAWF production website at https://wawf.eb.mil.

Invoice Type in WAWF:

If billing for Materials Only or a combination of Materials and Services, select “Invoice and Receiving Report (Combo)”.

If billing for Services Only, select “2-n-1 (Services Only)”

If billing for Cost-Reimbursement, Time-and-Materials, and Labor Hour- Contracts, select “Cost Voucher”

(**Cost Vouchers require invoices to be sent to DCAA for approval, therefore a DCAA DoDAAC is required A letter of “DCAA Approval for Direct Invoice Submittal” is required to be attached to all Direct-Bill Cost Vouchers.**)

Acceptor:

Ship To/Service Acceptor DoDAAC: TBD Name:

Phone Number:

E-Mail:

Pay Official:

Pay DoDAAC: HQ0131

For payment processing questions, contact the following DFAS office as specified in the contract/order:

Columbus Center -- 1-800-756-4571

HQ0131 – Option 2, then Option 2

E-Mail Notifications:

For Acceptors:

To facilitate payment processing, the contractor shall send an additional e-mail notification to the Acceptor by clicking on the “Send More Email Notifications” link after submitting a document in WAWF.

(d) Points of Contact:

Reference clause 52.204-9000, Points of Contact, for Contracting Officer, Contract Specialist, Customer/COR/TM and Contractor Points of Contact information.

(e) Information:

Additional DISA WAWF guidance and information for both contractor and government personnel is available at http://www.ditco.disa.mil/hq/WAWF/.

(End of clause)

Section H - Special Contract Requirements

CLAUSES INCORPORATED BY FULL TEXT

52.204-9201 SECURITY CLEARANCE

(JUN 1996)

(H507 Previously)

Within 30 days after the effective date of this contract, the contractor shall submit the paperwork necessary to obtain the proper security clearances. See DD Form 254, Section J, Attachment J-4.

CLAUSES INCORPORATED BY FULL TEXT

52.216-9201

PRICE GUARANTEE

(JUN 1996)

(H514 Previously)

a. The prices contained in this contract shall apply from date of contract award through a period ending 96 months from the date of contract award. This clause shall apply up to an additional 6 months if the contract is extended in accordance with FAR Clause 52.217-8.

52.239-9001 DATA INFORMATION ASSURANCE PROTECTION (JULY 2006)

(a) The contractor shall protect and safeguard sensitive Government Provided Information (GFI) and data from inadvertent disclosure, misuse, display, theft, and unauthorized actions that would destroy or render the information unavailable for specific government use. Should the contractor, or one of his/her employees, make any inadvertent or any unauthorized disclosure(s) or willfully participate in activities that result in detrimental harm to the protection and safeguarding of sensitive (GFI) and data, such actions may be considered to be a breach of this contract and the terms of the Default clause may be invoked. The contractor shall afford safeguarding consistent with the protection requirements identified by the government until such time the government deems the information/data is no longer sensitive and provides corresponding written notification to the contractor.

(b) All contractor and support contractor personnel with access to DISA and DOD Information Systems shall complete initial information assurance awareness and annual refresher training in accordance with DOD Directive, 8570.1, IA Training, Certification, and Workforce Management.

(c) To support IA professionals, the DoD IA Portal (IA Support Environment (IASE)) provides DOD IA policy-training requirements and DoD sponsored training. The IA Portal is located at http://iase.disa.mil. This site also provides access to DOD Directive 8500.1, Information Assurance (IA), and DOD 8570.1-M, Information Assurance Workforce Improvement Program.

(End of clause)

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.209-9000 ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTEREST (OCCI) (DEC 2005)

(a) An offeror shall identify in its proposal, quote, bid or any resulting contract, any potential or actual Organizational and Consultant Conflicts of Interest (OCCI) as described in FAR Subpart 9.5. This includes actual or potential conflicts of interests of proposed subcontractors. If an offeror identifies in its proposal, quote, bid or any resulting contract, a potential or actual conflict of interests the offeror shall submit an Organizational and Consultant Conflicts of Interest Plan (OCCIP) to the contracting officer. The OCCIP shall describe how the offeror addresses potential or actual conflicts of interest and identify how they will avoid, neutralize, or mitigate present or future conflicts of interest.

(b) Offerors must consider whether their involvement and participation raises any OCCI issues, especially in the following areas when:

(1) Providing systems engineering and technical direction.

(2) Preparing specifications or work statements and/or objectives.

(3) Providing evaluation services.

(4) Obtaining access to proprietary information.

(c) If a prime contractor or subcontractor breaches any of the OCCI restrictions, or does not disclose or misrepresents any relevant facts concerning its conflict of interest, the government may take appropriate action, including terminating the contract, in additional to any remedies that may be otherwise permitted by the contract or operation of law.

(End of clause)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (APR 2011)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (SEP 2006), with Alternate I (OCT 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

_X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010)(Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) 52.204-11, American Recovery and Reinvestment Act—Reporting Requirements (JUL 2010) (Pub. L. 111-5).

___ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (DEC 2010) (31 U.S.C. 6101 note). (Applies to contracts over $30,000). (Not applicable to subcontracts for the acquisition of commercially available off-the-shelf items).

___ (7) 52.219-3, Notice of Total HUBZone Set-Aside or Sole-Source Award (JAN 2011) (15 U.S.C. 657a).

___ (8) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

___ (9) [Reserved].

___ (10)(i) 52.219-6, Notice of Total Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644).

___ (ii) Alternate I (OCT 1995) of 52.219-6.

___ (iii) Alternate II (MAR 2004) of 52.219-6.

___ (11)(i) 52.219-7, Notice of Partial Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644).

___ (ii) Alternate I (OCT 1995) of 52.219-7.

___ (iii) Alternate II (MAR 2004) of 52.219-7.

_X_ (12) 52.219-8, Utilization of Small Business Concerns (JAN 2011) (15 U.S.C. 637 (d)(2) and (3)).

_X_ (13)(i) 52.219-9, Small Business Subcontracting Plan (JAN 2011) (15 U.S.C. 637(d)(4)).

___ (ii) Alternate I (OCT 2001) of 52.219-9 ___ (iii) Alternate II (OCT 2001) of 52.219-9.

___ (iv) Alternate III (JUL 2010) of 52.219-9.

___ (14) 52.219-14, Limitations on Subcontracting (DEC 1996) (15 U.S.C. 637(a)(14)).

___ (15) 52.219-16, Liquidated Damages--Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (16)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

___ (ii) Alternate I (JUNE 2003) of 52.219-23.

___ (17) 52.219-25, Small Disadvantaged Business Participation Program--Disadvantaged Status and Reporting (DEC 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (18) 52.219-26, Small Disadvantaged Business Participation Program--Incentive Subcontracting (OCT 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (19) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (MAY 2004) (U.S.C. 657 f).

_X_ (20) 52.219-28, Post Award Small Business Program Rerepresentation (APR 2009) (15 U.S.C. 632(a)(2)).

___ (21) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (APR 2011).

___ (22) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (APR 2011).

_X_ (23) 52.222-3, Convict Labor (JUNE 2003) (E.O. 11755).

_X_ (24) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JUL 2010) (E.O. 13126).

_X_ (25) 52.222-21, Prohibition of Segregated Facilities (FEB 1999).

_X_ (26) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

_X_ (27) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212).

_X_ (28) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 2010) (29

U.S.C. 793).

__X_ (29) 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212).

____ (30) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

___ (31) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212).

___ (32) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (33) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(c)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (34) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b) ___ (35)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423) .

___ (ii) Alternate I (DEC 2007) of 52.223-16. .

___ (36) 52.223-18, Contractor Policy to Ban Text Messaging while Driving (SEP 2010) (E.O. 13513).

_X_ (37) 52.225-1, Buy American Act--Supplies (JUNE 2003) (41 U.S.C. 10a-10d).

___ (38)(i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (JUN 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138).

___ (ii) Alternate I (JAN 2004) of 52.225-3.

___ (iii) Alternate II (JAN 2004) of 52.225-3.

___ (39) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (40) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (41) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (42) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

___ (43) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)) ___ (44) 52.232-30, Installment Payments for Commercial Items (OCT 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

_X_ (45) 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) (31 U.S.C. 3332).

___ (46) 52.232-34, Payment by Electronic Funds Transfer--Other than Central Contractor Registration (MAY 1999) (31 U.S.C. 3332) ___ (47) 52.232-36, Payment by Third Party (FEB 2010) (31 U.S.C. 3332).

_X_ (48) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

___ (49)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (APR 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act--Price Adjustment (Multiple Year and Option Contracts) (SEP 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act--Price Adjustment (SEP 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.)

____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

____ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).

____ (8) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008)(31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note).

(ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) Reserved.

(iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793).

(vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (JAN 2009).

(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.216-18 Ordering. (OCT 1995)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from contract award through a timeframe of 96 months if all option years are exercised.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.

(End of clause)

52.216-19 Order Limitations. (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $100, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor:

(1) Any order for a single item in excess of $1,500,000.00;

(2) Any order for a combination of items in excess of $10,000,000.00; or

(3) A series of orders from the same ordering office within 60 days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above.

(d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 5 calendar days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

52.216-22 Indefinite Quantity. (OCT 1995)

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum". The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum".

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after contract expiration date.

(End of clause)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days.

(End of clause)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 96 months.

(End of clause)

52.246-20 WARRANTY OF SERVICES (MAY 2001)

(a) Definition.

"Acceptance," as used in this clause, means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing and identified supplies, or approves specific services, as partial or complete performance of the contract.

(b) Notwithstanding inspection and acceptance by the Government or any provision concerning the conclusiveness thereof, the Contractor warrants that all services performed under this contract will, at the time of acceptance, be free from defects in workmanship and conform to the requirements of this contract. The Contracting Officer shall give written notice of any defect or nonconformance to the Contractor within 30 days from the date of acceptance by the Government. This notice shall state either (1) that the Contractor shall correct or reperform any defective or nonconforming services, or (2) that the Government does not require correction or reperformance.

(c) If the Contractor is required to correct or reperform, it shall be at no cost to the Government, and any services corrected or reperformed by the Contractor shall be subject to this clause to the same extent as work initially performed. If the Contractor fails or refuses to correct or reperform, the Contracting Officer may, by contract or otherwise, correct or replace with similar services and charge to the Contractor the cost occasioned to the Government thereby, or make an equitable adjustment in the contract price.

(d) If the Government does not require correction or reperformance, the Contracting Officer shall make an equitable adjustment in the contract price.

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil https://www.acquisition.gov/far/

(End of provision

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil https://www.acquisition.gov/far/

(End of clause)

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

When submitting a request for payment, the Contractor shall--

(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and

(b) Separately identify a payment amount for each contract line item included in the payment request.

(End of clause)

252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (MAR 2011)

(a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components.

_X_ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207).

(b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components.

(1) _X_252.203-7000, Requirements Relating to Compensation of Former DoD Officials (JAN 2009) (Section 847 of Pub. L. 110-181).

(2) _X_ 252.205-7000, Provision of Information to Cooperative Agreement Holders (DEC 1991) (10 U.S.C. 2416).

(3) ___ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) (OCT 2010) (15 U.S.C. 637).

(4) ___ 252.219-7004, Small Business Subcontracting Plan (Test Program) (JAN 2011) (15 U.S.C. 637 note).

(5)(i) _X_ 252.225-7001, Buy American Act and Balance of Payments Program (JAN 2009) (41 U.S.C. 10a-10d, E.O. 10582).

(ii) ____ Alternate I (DEC 2010) of 252.225-7001.

(6) ____ 252.225-7008, Restriction on Acquisition of Specialty Metals (JUL 2009) (10 U.S.C. 2533b).

(7) ____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JAN 2011) (10 U.S.C. 2533b).

(8) _X__ 252.225-7012, Preference for Certain Domestic Commodities (JUN 2010) (10 U.S.C. 2533a).

(9) ____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools (JUN 2005) (10 U.S.C. 2533a).

(10) ____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (DEC 2010) (Section 8065 of Public Law 107-117 and the same restriction in subsequent DoD appropriations acts).

(11) )(i) ___ 252.225-7021, Trade Agreements (NOV 2009) (19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note).

(ii) ___ Alternate I (SEP 2008)

(iii) ___ Alternate II (DEC 2010) of 252.225-7021.

(12) ____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales (APR 2003) (22 U.S.C. 2779).

(13) ____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments (APR 2003) (22 U.S.C. 2755).

(14)(i) ____ 252.225-7036, Buy American Act--Free Trade Agreements--Balance of Payments Program (DEC 2010) (41 U.S.C. 10a-10d and 19 U.S.C. 3301 note).

(ii) ___ Alternate I (JUL 2009) of 252.225-7036.

(iii) ___ Alternate II (DEC 2010) of 252.225-7036.

(iv) ___ Alternate III (DEC 2010) of 252.225-7036.

(15) ____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (JUN 2005) (10 U.S.C. 2534(a)(3)).

(16) _X__ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (SEP 2004) (Section 8021 of Public Law 107-248 and similar sections in subsequent DoD appropriations acts).

(17) ____ 252.227-7015, Technical Data--Commercial Items (MAR 2011) (10 U.S.C. 2320).

(18) ____ 252.227-7037, Validation of Restrictive Markings on Technical Data (SEP 1999) (10 U.S.C. 2321).

(19) _X__ 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227).

(20) ____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Public Law 108-375).

(21) ____252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84).

(22) _X__ 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410).

(23)____252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations (OCT 2010) (Section 807 of Public Law 111-84).

(24)____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Public Law 110-417).

(25)(i) _X__ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(ii) ____ Alternate I (MAR 2000) of 252.247-7023.

(iii) ____ Alternate II (MAR 2000) of 252.247-7023.

(iv) ____ Alternate III (MAY 2002) of 252.247-7023.

(26) _X__ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631).

(c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract:

(1) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84).

(2) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Public Law 108-375).

(3) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Public Law 110-417).

(4) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(5) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631).

(End of clause)

252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR PERSONNEL (NOV

2010)

(a) Definitions. As used in this clause--

Detainee means any person captured, detained, held, or otherwise under the effective control of DoD personnel (military or civilian) in connection with hostilities. This includes, but is not limited to, enemy prisoners of war, civilian internees, and retained personnel. This does not include DoD personnel or DoD contractor personnel being held for law enforcement purposes.

Interrogation of detainees means a systematic process of formally and officially questioning a detainee for the purpose of obtaining reliable information to satisfy foreign intelligence collection requirements.

(b) Contractor personnel shall not interrogate detainees.

(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in all subcontracts that may require subcontractor personnel to interact with detainees in the course of their duties.

(End of clause)

Section J - List of Documents, Exhibits and Other Attachments

LIST OF ATTACHMENTS

ATTACHMENT

DESCRIPTION

J-1

Statement of Objectives (SOO)

J-2

Requirements Document, Revised 17 Aug 2011 J-3

Quality Assurance Surveillance Plan (QASP), Revised 11 Aug 2011 J-4

DD Form 254 – Contract Security Classification Specification

J-5

Performance Work Statement (PWS) Template, Revised 17 Aug 2011 J-6

CLIN 0001 - IBM System Z Pricing Model (Excel), Revised 14 Jul 2011 J-7

CLIN 0002 - X-86 Pricing Model (Excel)

J-8

CLIN 0003 - Itanium Pricing Model (Excel)

J-9

CLIN 0004 - SPARC Pricing Model (Excel)

J-10

CLIN 0005 - IBM System P Pricing Model (Excel)

J-11

Question/Answer Submission Template

Section K - Representations, Certifications and Other Statements of Offerors

CLAUSES INCORPORATED BY REFERENCE

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2011) ALTERNATE I (APR 2011)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision.

(a) Definitions. As used in this provision:

"Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Inverted domestic corporation means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L.