QuestionSet5.docx

Q&A Set 5 (24 April 2020) Solitication #: FA8604-20-R-8104

1. In regards to this solicitation, please confirm whether there are loading docks at each building for each project including the buildings we are not installing but are unloading material?

ANSWER: There ARE loading docks at Columbus AFB, Building 158 and Wright-Patterson AFB, Building 64. Wright-Patterson AFB, Buildings 252, 18E, and 71B, and Gunter, DO NOT have any loading docks.

2. We have attempted to reach TSgt. West on her cell phone numerous times the past couple of weeks to schedule a site visit. Possibly she is deployed. Is there an alternate POC for the project?

ANSWER: There are no additional POC's. The individuals and their contact information has been provided in the solicitation and previously answered Q&A's. If you can't reach her via phone, please email her at lakeisha.west@us.af.mil.

3. Questions Specifically for GUNTER:

a. Cover: 3.1.3. bin shelving – can this be bid as a run of 3 and 1 stand alone as depicted on the drawing?

Answer: No these are bin shelving cabinets and are individual.

b. DEMO – unclear – assume the “A” rack? – If so please provide size of upright, size of beams - # of shelf levels, is it decked? Is it anchored?

c. 3.2.8. – 3.2.10.2 - Am I correct that there are (2) work benches and (3) flat benches? Work benches defined on the drawing with a line through the top?

Answer: Yes

d. 3.2.11 Desk configurations – I assume the engineer realizes this design will not allow 2 people working at the same time nor both pencil drawers to open at the same time Answer: Yes

e. 3.2.11.1 – configuration will not allow for (2) 96” long risers Answer: Risers are 84 inches and 60 inches.

f. Gunter appendix B – 3.2.10. calls out for an 84” hardwood top. 3.2.10.1. calls out for a 96” riser and sketch also notes 8’. May I assume the 84” is a mis-print?

Answer: Yes, 84” should be 96” hardwood top

4. Question Specifically for Wright-Patterson AFB:

a. Cover – 3.1.4. Does the engineer want the MDC’s to have locks? Keyed alike or different?

Answer: The work stations specified in 3.1.4. of the Cover PD do not require locks.

5. Question Specifically for Columbus:

a. Cover / DEMO – assuming (24) sections 48 x 108 x ?? - (2) sections 24 x 108 x ?? – (14) sections 24 x 96 x ?? All 3 levels? Decked? Anchored? Is the gray rack nut and bolt? Can’t really define by the photo?

Answer: Your counts and dimensions are correct. All existing rack is 3 levels except one of the 24” by 108” has 4 levels. All existing rack has decking – 48” deep bays have wood deck pieces laid in place, 24” deep bays have solid steel decking. The gray existing rack is nut and bolt, green existing rack (14 – 24” by 94”) bays are not nut and bolt.

b. Fence – (1) 60 – 65’ run? (3) 8 – 10’ runs? What is the height of the ceiling / roof of the enclosed fenced area? How many light fixtures are there?

Answer: The three shorter runs are approximately 8’-9”. The long run is approximately 62’. Roof trusses in the fenced area are approximately 18’-6” above the warehouse floor. There are 3 light fixtures.

c. Columbus hinge lid totes – Request for (12) 15.2” x 10.9” x 9.7” totes – Mfg’er suggests 21’ x 15” x 9” as an alternate as the requested size is no longer available. Would this be accepted?

Answer: Please provide hinge lid totes at the dimensions specified.