QuestionSet2.docx
DOCX document 15 KB Posted
- Attached to
- FA8604-MMHS-Storage Aid Systems at WrightPatteron, OH; Gunter Annex, AL; Columbus AFB, MS
- Solicitation number
- FA8604-20-R-8104
About this file
This document contains a request for proposal for storage aid systems at multiple Air Force locations. The solicitation seeks proposals for the design, fabrication, installation, orientation and testing of storage aid systems at Wright-Patterson AFB in Ohio, Gunter Annex in Alabama, and Columbus AFB in Mississippi. Proposals are due by May 14, 2020 and the contract is to be completed within 280 days of award. Evaluation will be based on lowest price technically acceptable. The storage aid systems include items such as pallet rack, modular cabinets, bin cabinets, and rider reach vehicles. The contractor must be registered in SAM and the government intends to make award to the responsible offeror providing the lowest price to the government.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8604-20-R-8104-P0005.pdf | ||
| FA8604-20-R-8104-P0004.pdf | ||
| Question Set 8.docx | DOCX document | |
| FA8604-20-R-8104-P0003.pdf | ||
| QuestionSet7.pdf | ||
| Amendment FA860420R8104_0002.pdf | ||
| QuestionSet6.docx | DOCX document | |
| QuestionSet5.docx | DOCX document | |
| FA8604-20-R-8104-0001 Amendment.pdf | ||
| QuestionSet4.docx | DOCX document | |
| QuestionSet3.docx | DOCX document | |
| QuestionSet1.docx | DOCX document | |
| FA8604-20-R-8104 Combined SS RFP.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q&A Set 2 (3 April 2020) Solitication #: FA8604-20-R-8104
1. Then I assume cad drawings won’t be required for shop and as built submittals either.
ANSWER: AutoCAD drawings are required for Shop and As-Built drawings.
The following questions refer to Wright Patterson AFB - Cover:
2. 3.1.5 HD Storage Cabinets – States that the military will place and anchor these so I assume that is why they are not shown on the drawing? Also are we to unload, or is the military doing that as well? Are we required to provide the anchors or will the military supply their own?
ANSWER: The Contractor will need to unload the cabinets but does not need to provide anchoring hardware.
3. 3.1.5.2 Bin Cabinets – There are no bin cabinets shown on the drawing or listed building in description, need to know how many are required and what building they are going in ANSWER: Paragraph 3.1.5. reads, “three shelf cabinets shall be delivered to Building 252 and two bin cabinets shall be delivered to Building 71B.”
The following question refer to Wright Patterson AFB - Appendix A – Pallet Rack
4. Configuration Requirements – State that pallet rack is to be delivered to building 71B but not installed. Are we to unload and stage? Are we to provide anchors? \ ANSWER: The Contractor will need to unload the rack. Anchors shall be provided for all pallet rack, even the rack to be installed by the Government.
The following question refer to Wright Patterson AFB - Appendix B – Modular Cabinets
5. 3.1 Description – A total of 16 cabinets are to be supplied but the drawing does not show where they are being installed. Are we to install these in building 252 or is the military? If the military, are we unloading? Are we supplying anchors if they are installing?
ANSWER: The Contractor will need to unload the cabinets at Building 252, the Government will move the cabinets to the location where they want them. The Contractor does not need to provide anchors.
The following question refer to Wright Patterson AFB - Appendix C – Rider Reach Vehicle
6. 3.3.4.2 Battery Charger/Stand – How far away from the battery charger is the closest available electrical supply that has room for the charger? There is not one shown on the drawing.
ANSWER: The closest electrical supply to be used is no more than 30 feet away from the location where the battery charger is to be installed.
The following question refer to Columbus AFB - Appendix A – Pallet Rack
7. 3.1 System Description – States type “A,B,C” all have 6000 lb bays for 2 3000 pallets. Is this a mistake or are the pallets short? There is only 32” between beams.
ANSWER: Palletized loads may be stored on the top level of these racks. While pallets will not fit on each shelf
File details come from the government source that posted it. Updated .