Attachment_7_-_Bid_Schedule_Final_A002.xlsx

XLSX spreadsheet 46 KB Posted Aug 1, 2017

Attached to: Civil Engineering Facility & Equipment Support Service Federal contract opportunity
Solicitation number: FA8601-17-R-0025
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Wright Patterson Air Force Base

About this file

From the source

Attachment 7 - Bid Schedule_Revised 2

View the file

Other files for this federal contract opportunity

Other files attached to Civil Engineering Facility & Equipment Support Service, newest first.
File	Type	Posted
Questions_and_Comments__3.pdf	PDF	Aug 10, 2017
Attachment_11_-_Instructions_and_Evaluations_Criteria_-_Final.pdf	PDF	Aug 10, 2017
CE_Facility_&_Equipment_Support_Amendment_0003.pdf	PDF	Aug 10, 2017
Attachment_01_-__CE_Support_Contract_PWS_4_Aug_2017.pdf	PDF	Aug 10, 2017
Attachment_08_-_SCA_Wage_Determination_15-4731_--_Revision_3.pdf	PDF	Aug 10, 2017
Attachment_03_-_FINAL_Equip_List_Aug_7_2017.pdf	PDF	Aug 10, 2017
Questions_and_Comments_.pdf	PDF	Aug 1, 2017
CE_Facility_&_Equipment_Support_Amendment_0002.pdf	PDF	Aug 1, 2017
Attachment_11_-_Instructions_and_Evaluation_Commercial_v5.pdf	PDF	Aug 1, 2017
Attachment_7_-_Bid_Schedule_Final_A001.xlsx	XLSX spreadsheet	Jul 27, 2017
CE_Facility_&_Equipment_Support_-_Amendment_0001.pdf	PDF	Jul 27, 2017
Site_Visit_-_Government_Attendees.pdf	PDF	Jul 27, 2017
Combined_Pre-Site_Visit_Q&A_26_July_2017.pdf	PDF	Jul 27, 2017
Attachment_1_-_CE_Support_Contract_PWS_6.26.2017.pdf	PDF	Jul 27, 2017
Attachment_11_-_Instructions_and_Evaluation_Commercial_v5.pdf	PDF	Jul 27, 2017
Site_Visit_Meeting_Minutes.pdf	PDF	Jul 27, 2017
Site_Visit_-_Contractor_Attendees.pdf	PDF	Jul 27, 2017
Site_Visit_-_CE_Maintenance_and_Repair_Contract_Updated.pdf	PDF	Jul 27, 2017
Attachment_2_-_Bldg_Numbers_A001.pdf	PDF	Jul 27, 2017
Lab_Software_Presentation.pdf	PDF	Jul 27, 2017
Attachment_8_-_SCA_Wage_Determination_15-4731--Revision_2.pdf	PDF	Jul 27, 2017
Attachment_13_-_Facility_Tools_List.xlsx	XLSX spreadsheet	Jul 13, 2017
Attachment_1_-_CE_Support_Contract_PWS_6.16.2017.pdf	PDF	Jul 13, 2017
Attachment_11_-_Instructions_and_Evaluation_Commercial_v4.pdf	PDF	Jul 13, 2017
Attachment_7_-_Bid_Schedule_Final.xlsx	XLSX spreadsheet	Jul 13, 2017
Attachment_10_-_Past_Performance_Questionnaire_.docx	DOCX document	Jul 13, 2017
Attachment_5_-_Historical_Repair_under_$10k.pdf	PDF	Jul 13, 2017
Attachment_8_-_SCA_Wage_Determination_15-4731.pdf	PDF	Jul 13, 2017
FA8601-17-R-0025_CE_Facility_Mx_and_Support_V3.pdf	PDF	Jul 13, 2017
Attachment_6_-_Historical_Repair_over_$10K.pdf	PDF	Jul 13, 2017
Attachment_12_-_Area_B_Map_Site_Visit.pdf	PDF	Jul 13, 2017
Attachment_3_-_Equipment_List_Final.pdf	PDF	Jul 13, 2017
Attachment_9_-_WPAFB_Base_Facility_Standard.pdf	PDF	Jul 13, 2017
Attachment_14_-_Subcontractor_Consent_Letter.docx	DOCX document	Jul 13, 2017
Attachment_2_-_Bldg_Numbers.pdf	PDF	Jul 13, 2017
Attachment_4_-_WPAFB_Preventative_Mx_List.xlsx	XLSX spreadsheet	Jul 13, 2017

Show all 36

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Instructions

SOURCE SELECTION INFORMATION - SEE FAR 2.101 AND FAR 3.104

Contractor Bid Schedule Instructions

RFP: FA8601-17-R-0025

CE Facility Maintenance and Repair Support

	Instructions:
1	The complete Bid Schedule minus the Instructions Tab and TEP Tab will be incorporated into the contract.
2	Proposed prices/rates are all fully burdened Firm Fixed Price (FFP), with the following exceptions: CLIN 0003 is FFP Estimated, Government populated price.
3	Use no more than two rounding places. All dollar figures used must be rounded to the nearest penny.
4	The Grand Total for all tabs will be added together to determine your Total Evaluated Price. Review your TEP on TEP tab before submitting.

	Regular Labor Instructions:
1	The cells labeled "fill-in" on the tab named "Regular Labor" is where you will insert your pricing information for CLIN 0001. The table below as well as the provided Performance Work Statement (PWS), Equipment List, Preventative Maintenance task listing, Historical Repairs/Replacement Documents, and other RFP documents are provided to aid you in determine your pricing.
2	There are four trade categories provided below with hours associated with each position for each lab. These positions have been identified as critical/necessary. Offerors are required to determine, add, and price these four positions and any other trade category positions required to perform this effort. Space is provided on the Regular Labor and Overtime Rates tabs to do so in columns labeled "Determined by Offeror." Offeror must identify in tabs labeled "Determined by offeror (fill-in)" whether a position is technical or non-technical (e.g. Industrial Controls Mechanic (T)). Offerors must justify determination for trades considered technical positions. Use "Labor Category Justification" blocks on the Regular Hours tab to provide justification.
3	Include a corresponding Service Contract Act (SCA) trade name and five digit code for each position entered.
4	The total cost of in US dollars rounded to the nearest penny shall be input into each cell for the associated cost of performing that trade category in each laboratory

	Government Historical Hours
		Labor Category	AFIT
Lab 1	711 HPW
Lab 3	NASIC
Lab 4	AFPET
Lab 6	AFRL RX
Lab 7	AFRL RQ
Lab 8	AFRL RY
Lab 9	AFRL RYS
Lab 10	Total
		Lead Technician		2080	2080		2080	2080	2080		10400
		Industrial Controls Mechanic		2080			2080	2080	2080		8320
		*Purchasing Specialist									0
		*Clerk / Office Assistant		2080			2080	2080	2080		8320
		Add'l labor categories determined by Offeror	1352	12480	6240	624	12480	22880	20800	3432	80288
		Hour Totals:	1352	18720	8320	624	18720	29120	27040	3432	107328

Note: 2080 = 1 Full Time Equivalent

*If a Contractor believes that the duty descriptions listed for Office Assistant and Purchasing Specialist can be combined and performed by a single individual(s), the Offeror shall update the labor category in Regular Labor and Overtime Labor tabs as necessary to read “Purchasing Spec / Office Asst”.

	Overtime Rates Instructions:
1	The tab named "Overtime Rates" is where you will insert your pricing information for CLIN 0002.
2	Provide an overtime labor rate for positions that you priced in Regular Labor tab.
3	Highlight in grey all trade categories that you consider a technical position and write (T) next to the trade category (e.g. Industrial Controls Mechanic (T)).
4	Leave the cell white for all trade categories that you consider a non-technial position. Write (NT) next to the trade category (e.g. Purchasing Specialist (NT)).
5	In the Column labeled "aggregate rate", rows B and E, calculate and insert your aggregate rate of all Technical positions (those shaded grey). The aggregate shall be calculated by taking sum all the OT rates for technical positions and dividing by the total number of technical position rates provided.

	Materials Instructions:
1	Provide a material handling rate (must be a percentage) for each year in the cells labled "fill-in". Rates may differ by year but be static in any given year (i.e. rates may not be provided on a sliding scale).

Regular Labor

Total Evaluated Price

Regular Labor (CLIN 0001) Series

Base Year

Total Evaluated Price (Base + Option Years)

Labor Category

SCA Category

AFIT - Lab 1

711 HPW - Lab 3

NASIC - Lab 4

AFPET - Lab 6

AFRL/RX - Lab 7

AFRL/RQ - Lab 8

AFRL/RY - Lab 9

AFRL/RYS - Lab 10

Total

Lab 1

Lab 3

Lab 4

Lab 5

Lab 7

Lab 8

Lab 9

Lab 10

Base

Lead Technician

fill-in

OY1

Industrial Controls Mechanic

fill-in

OY2

Purchasing Specialist

fill-in

OY3

Clerk / Office Assistant

fill-in

OY4