AFMC Form 158 - Packaging.pdf
PDF 4 MB Posted
- Attached to
- ALE-47 Countermeasures Dispenser System (CMDS) Hardware Procurement Federal contract opportunity
- Solicitation number
- FA8523-24-R-0007
About this file
This document is an AFMC Form 158, Packaging Requirements, which provides instructions for packaging and marking requirements for a federal contract opportunity. It outlines the use of military and commercial packaging standards, including MIL-STD-2073-1 and ASTM D3951. The form also includes requirements for engineered or specialized containers, hazardous material packaging, and packaging data. Key details include the use of heat-treated and debarked wood in accordance with ISPM No. 15 for wooden containers and pallets, compliance with hazardous material regulations, and the need to provide preservation and packing data. The form is designed to be completed by the contracting officer and provides specific instructions for the contractor.
View the file
Other files for this federal contract opportunity
Show all 50
ALE-47 Countermeasures Dispenser System (CMDS) Hardware Procurement has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
For the best experience, open this PDF portfolio in
Acrobat X or Adobe Reader X, or later.
Get Adobe Reader Now!
http://www.adobe.com/go/reader
PACKAGING REQUIREMENTS
AFMC FORM 158, 20221014
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINER (CDRS) ITEM NAME(s) OR
NSN/MMAC
B. PACKAGING OF HAZARDOUS MATERIALS ITEM NAME(s) OR NSN/ MMAC FAR Clause 52.223-3, Hazardous Material Identification and Material Safety Data
C. PACKAGING DATA (Coded and/or Special Packaging Instructions) ITEM NAME(s) OR NSN/MMAC FAR Clause 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in Acquisition Streamlining and Standardization Information System
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUP ICQ MOP CD CT UNIT
CONT
INT
CONT UCL SPECIAL
MARKINGS
UNIT
PACK
WEIGHT
LENGTH
OPI
WIIDTH
DEPTH
CUBE
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
ITEM(S) CUSH
DUNN
WRAP
MTL
PRES
AFMC FORM 158, 20221014 Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special Packaging Instructions, apply.
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUP
ICQ
MOP
CD
CT
UNIT CONT
INT CONT
UCL
SPECIAL MARKINGS
UNIT PACK WEIGHT
UNIT PACK LENGTH
OPI
UNIT PACK WIIDTH
UNIT PACK DEPTH
UNIT PACK
CUBE
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
ITEM(S)
CUSH DUNN
WRAP MTL
PRES MTL
AFMC FORM 158, 20221014
Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS
SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN
BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND
PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM
DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard
Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing
Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e)
International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD-
2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
Packaging Instructions, apply.
11.0.1.20130826.2.901444.899636
TextField1: F3QCDG4135B052 FD2060-24-31387 PAGE 4 OF 4
TextField1: ITEMS SHALL BE PACKED IAW MIL-STD-2073-1 AND MARKED IAW MIL-STD-129
TextField1: 406 SCMS/GULAA
TextField1: Jason Holmes / DSN 497-6309
CheckBox1: 0
CheckBox1: 0
CheckBox1: 0
SignatureField1:
DateField1: 2024-05-15
TextField3: M
TextField3: M
TextField3: 5998-01-357-8993EW
TextField3: 5865-01-380-8046EW
TextField3: 5998-01-357-8993EW
TextField3: 5865-01-380-8046EW
TextField3: 1
TextField3: 1
TextField3: X
TextField3: X
TextField3: B
TextField3: B
TextField3: .255
TextField3: 1.311
TextField3: 4.00
TextField3: 14.50
TextField3: 10.50
TextField3: 12.50
TextField3: 10.50
TextField3: 12.50
TextField3: 1.70
TextField3: 14.80
TextField3: 39
TextField3: 39
TextField3: B
TextField3: B
TextField3: 00
TextField3: 00
TextField3: NS
TextField3: NR
TextField3: A
TextField3: A
TextField3: NB
TextField3: NB
TextField3: K3
TextField3: K3
TextField3: 00
TextField3: 00
TextField3: 1
TextField3: 1
TextField3: GX
TextField3: GX
TextField3: 000
TextField3: 000
TextField3: 001
TextField3: 001
TextField4: E
TextField4: 18
CheckBox2: 0
CheckBox2: 0
CheckBox2: 0
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUP
ICQ
MOP
CD
CT
UNIT CONT
INT CONT
UCL
SPECIAL MARKINGS
UNIT PACK WEIGHT
UNIT PACK LENGTH
OPI
UNIT PACK WIIDTH
UNIT PACK DEPTH
UNIT PACK
CUBE
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
ITEM(S)
CUSH DUNN
WRAP MTL
PRES MTL
AFMC FORM 158, 20221014
Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS
SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN
BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND
PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM
DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard
Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing
Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e)
International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD-
2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
Packaging Instructions, apply.
11.0.1.20130826.2.901444.899636
TextField1: F3QCDG4135B052 FD2060-24-31387 PAGE 2 OF 4
TextField1: ITEMS SHALL BE PACKED IAW MIL-STD-2073-1 AND MARKED IAW MIL-STD-129
TextField1: 406 SCMS/GULAA
TextField1: Jason Holmes / DSN 497-6309
CheckBox1: 0
CheckBox1: 0
CheckBox1: 0
SignatureField1:
DateField1: 2024-05-15
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: 5998-01-414-1387EW
TextField3: 5998-01-357-0602EW
TextField3: 5998-01-388-7062EW
TextField3: 5998-01-333-1980EW
TextField3: 5895-01-335-6069EW
TextField3: 5998-01-357-0600EW
TextField3: 5998-01-357-0601EW
TextField3: 5998-01-357-0602EW
TextField3: 5998-01-357-0603EW
TextField3: 5998-01-388-7062EW
TextField3: 5998-01-357-0600EW
TextField3: 5998-01-357-0601EW
TextField3: 5998-01-414-1387EW
TextField3: 5998-01-580-9469EW
TextField3: 5998-01-383-8263EW
TextField3: 5998-01-333-1980EW
TextField3: 5895-01-335-6069EW
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: 0.057
TextField3: 0.057
TextField3: 0.057
TextField3: .057
TextField3: 0.057
TextField3: .101
TextField3: .057
TextField3: 3.00
TextField3: 3.00
TextField3: 3.00
TextField3: 3.00
TextField3: 3.00
TextField3: 3.00
TextField3: 3.00
TextField3: 5.30
TextField3: 5.30
TextField3: 5.30
TextField3: 5.30
TextField3: 5.30
TextField3: 6.30
TextField3: 5.30
TextField3: 6.30
TextField3: 6.30
TextField3: 6.30
TextField3: 6.30
TextField3: 6.30
TextField3: 9.30
TextField3: 6.30
TextField3: .60
TextField3: .60
TextField3: .60
TextField3: .80
TextField3: 1.30
TextField3: 1.50
TextField3: .50
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: NS
TextField3: NS
TextField3: NS
TextField3: NS
TextField3: NS
TextField3: NS
TextField3: NS
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField4: E
TextField4: 18
CheckBox2: 0
CheckBox2: 0
CheckBox2: 0
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUP
ICQ
MOP
CD
CT
UNIT CONT
INT CONT
UCL
SPECIAL MARKINGS
UNIT PACK WEIGHT
UNIT PACK LENGTH
OPI
UNIT PACK WIIDTH
UNIT PACK DEPTH
UNIT PACK
CUBE
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
ITEM(S)
CUSH DUNN
WRAP MTL
PRES MTL
AFMC FORM 158, 20221014
Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS
SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN
BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND
PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM
DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard
Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing
Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e)
International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD-
2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
Packaging Instructions, apply.
11.0.1.20130826.2.901444.899636
TextField1: F3QCDG4135B052 FD2060-24-31387 PAGE 3 OF 4
TextField1: ITEMS SHALL BE PACKED IAW MIL-STD-2073-1 AND MARKED IAW MIL-STD-129
TextField1: 406 SCMS/GULAA
TextField1: Jason Holmes / DSN 497-6309
CheckBox1: 0
CheckBox1: 0
CheckBox1: 0
SignatureField1:
DateField1: 2024-05-15
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: 5998-01-335-3198EW
TextField3: 5865-01-333-4735EW
TextField3: 5998-01-336-9190EW
TextField3: 5935-01-334-3230EW
TextField3: 5998-01-580-7506EW
TextField3: 5998-01-334-2219EW
TextField3: 5998-01-334-2219EW
TextField3: 5998-01-337-7526EW
TextField3: 5998-01-335-3197EW
TextField3: 5998-01-580-7506EW
TextField3: 5998-01-439-9525EW
TextField3: 5998-01-336-3867EW
TextField3: 5998-01-336-9190EW
TextField3: 5935-01-334-3230EW
TextField3: 5998-01-335-3198EW
TextField3: 5865-01-333-4735EW
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: .077
TextField3: 0.798
TextField3: .057
TextField3: 1.311
TextField3: .101
TextField3: 1.695
TextField3: 4.00
TextField3: 3.00
TextField3: 12.50
TextField3: 3.00
TextField3: 14.50
TextField3: 9.30
TextField3: 5.30
TextField3: 6.30
TextField3: 10.50
TextField3: 5.30
TextField3: 12.50
TextField3: 15.00
TextField3: 6.30
TextField3: 9.30
TextField3: 10.50
TextField3: 6.30
TextField3: 12.50
TextField3: 21.00
TextField3: 1.30
TextField3: 1.00
TextField3: 6.00
TextField3: .80
TextField3: 9.00
TextField3: 6.60
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 17
TextField3: 17
TextField3: 17
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: NS
TextField3: NS
TextField3: NR
TextField3: NS
TextField3: NR
TextField3: NV
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NA
TextField3: NA
TextField3: NA
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: EA
TextField3: EA
TextField3: EA
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: 41
TextField3: 41
TextField3: 10
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField4: E
TextField4: 18
CheckBox2: 0
CheckBox2: 0
CheckBox2: 0
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUP
ICQ
MOP
CD
CT
UNIT CONT
INT CONT
UCL
SPECIAL MARKINGS
UNIT PACK WEIGHT
UNIT PACK LENGTH
OPI
UNIT PACK WIIDTH
UNIT PACK DEPTH
UNIT PACK
CUBE
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
ITEM(S)
CUSH DUNN
WRAP MTL
PRES MTL
AFMC FORM 158, 20221014
Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS
SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN
BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND
PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM
DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard
Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing
Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e)
International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD-
2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
Packaging Instructions, apply.
11.0.1.20130826.2.901444.899636
TextField1: F3QCDG4135B052 FD2060-24-31387 PAGE 1 OF 4
TextField1: ITEMS SHALL BE PACKED IAW MIL-STD-2073-1 AND MARKED IAW MIL-STD-129
TextField1: 406 SCMS/GULAA
TextField1: Jason Holmes / DSN 497-6309
CheckBox1: 0
CheckBox1: 0
CheckBox1: 0
SignatureField1:
DateField1: 2024-05-15
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: M
TextField3: 5865-01-527-2187EW
TextField3: 5998-01-357-0599EW
TextField3: 5865-01-380-8046EW
TextField3: 5865-01-437-3371EW
TextField3: 5865-01-437-3373EW
TextField3: 5865-01-451-2868EW
TextField3: 5930-01-333-2196EW
TextField3: 5865-01-334-8349EW
TextField3: 5865-01-380-8046EW
TextField3: 5865-01-437-3371EW
TextField3: 5865-01-437-3373EW
TextField3: 5930-01-333-2196EW
TextField3: 5865-01-334-8349EW
TextField3: 5865-01-527-2187EW
TextField3: 5998-01-357-0599EW
TextField3: 5865-01-687-1948EW
TextField3: 5865-01-451-2868EW
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: X
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: 0.797
TextField3: 3.147
TextField3: 1.311
TextField3: 1.311
TextField3: 1.311
TextField3: 1.311
TextField3: 1.311
TextField3: 0.180
TextField3: 12.50
TextField3: 14.50
TextField3: 14.50
TextField3: 14.50
TextField3: 14.50
TextField3: 14.50
TextField3: 14.50
TextField3: 3.00
TextField3: 10.50
TextField3: 12.50
TextField3: 15.00
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 8.30
TextField3: 10.50
TextField3: 12.50
TextField3: 25.00
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 6.00
TextField3: 12.00
TextField3: 14.00
TextField3: 14.80
TextField3: 12.00
TextField3: 7.60
TextField3: 13.00
TextField3: 1.80
TextField3: 19
TextField3: 39
TextField3: 17
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: 39
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: B
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: NR
TextField3: NR
TextField3: NV
TextField3: NR
TextField3: NR
TextField3: NR
TextField3: NR
TextField3: NS
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: A
TextField3: NA
TextField3: NB
TextField3: NA
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: NB
TextField3: EA
TextField3: K3
TextField3: EA
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: K3
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 51
TextField3: GX
TextField3: 41
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: GX
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 000
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: 001
TextField4: E
TextField4: 18
CheckBox2: 0
CheckBox2: 0
CheckBox2: 0
File details come from the government source that posted it. Updated .