QA_15_NOV_16_2ND_SITE_VISITcsr1_(002).docx

FA8201-16-B-0009

BLDG. 503 UPGRADES

KRSM 092001A, B, C

SECOND SITE VISIT 15 Nov 2016 Contractor Questions and Answers

1. This job appears to be fully engineered and so we have some questions that we believe should be answered by the engineer of record:

A. Where do we get power for the new roll up door for 503 H? There is a 120 volt/208 volt panel in the building but it is completely full. There also is a 277/480 volt panel but the door was locked to be able to see if any space is available.

RESPONSE: Please utilize spare circuit number 2 in the 277/480 V panel.

B. Where do we get power for the ultrasonic bird repeller?

RESPONSE: 503 north wall, panel 4, circuit 26.

C. Where do we get power for the light in the new booth at gate 36?

RESPONSE: From panel P5 within the guard shack. Utilize available space and provide breaker. Cover unused openings.

D. Where is the 277 /480 volt panel located for power to the heat tape?

RESPONSE: 503A room 129 (northeast corner of facility on main level), panel LM circuit 9. Provide breaker. Observe that drawing shows trace in valley and entire gutter area.

2. The fixture schedule on page EO-1 [22 of 26] it shows a fixture type PK-4, ceiling mount, where does this install?

RESPONSE: See sheet 24, upper left of the drawing. (Per note 4)

3. On page EO-4 [24 of 26] Some important information on the vindicator system on the gates is blacked out. Can you please provide these details without blackout?

RESPONSE: See revison