FA810223R2000 18Nov22.pdf

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)

PREVIOUS EDITION NOT USABLE Prescribed by GSA – FAR (48 CFR) 53/214(c)

SOLICITATION, OFFER AND AWARD J 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15CFR 7900)

RATING

DO: A7

Page of Page

2. CONTRACT NO. 3. SOLICITATION NO.

FA8102-23-R-2000

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

7. ISSUED BY

DEPARTMENT OF THE AIR FORCE, AFLCMC HBSK

3001 STAFF DR STE 2AH 86A

TINKER AFB OK 73145-3303

BUYER: Amanda Jones/AFLCMC/HBK amanda.jones.39@us.af.mil Phone: (714) 343- 7808

FA8102 8. ADDRESS OFFER TO (If other than Item 7)

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTON PAGE(S) (X) Sec. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

X A SOLICITATION/CONTRACT FORM

X B SUPPLIES OR SERVICES AND

X C DESCRIPTION/SPECS/WORK STATEMENT

X D PACKAGING AND MARKING

X E INPECTION AND ACCEPTANCE

X F DELIVERIES OR PERFORMANCE

X G CONTRACT ADMINISTRATION DATA

X H SPECIAL CONTRACT REQUIREMENTS

X I CONTRACT CLAUSES

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER

X J LIST OF ATTACHMENTS

X K REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

X L INSTRS., CONDS., AND NOTICES TO OFFERORS

X M EVALUATION AND FACTORS FOR AWARD

OFFER (Must be fully completed by offeror)

24. ADMINISTERED BY (If other than Item 7) SCD:C 25. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

X

5. DATE ISSUED

18 NOV 2022

6.REQUISITION/PURCHASE NO

TBD

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if hand carried, in the depository located in until 3:00 (Hour) local time 29-DEC-2022 (Date).

CAUTION- LATE Submissions, Modifications, and Withdrawals: Section L, Provision No 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this section.

10. FOR INFORMATION

CALL:

A. NAME

Amanda Jones

B. TELEPHONE (NO COLLECT CALLS)

(714 ) 343 -7808

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period. AN/TRN41

12. In compliance with the above, the undersigned agrees, if this offer is accepted within 220 calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT(See Section I, Clause No 52.232-8)

10 CALENDAR DAYS 20 CALENDAR DAYS 30 CALENDAR DAYS CALENDAR DAYS

14. ACKNOWLEDGEMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated:

AMENDMENT NO. DATE AMENDMENT NO. DATE

15A. NAME AND

ADDRESS OF

OFFEROR

CODE FACILITY 16. NAME AND TITLE OF PERSON

AUTHORIZED TO SIGN OFFER (Type or print)

15B. TELEPHONE NO.

(Include Area Code)

15C.CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE-ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS 20. AMOUNT

$ 198,360,000.00

21. ACCOUNTING AND APPROPRIATION

SEE SCHEDULE

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN

COMPETITION

10 U.S.C. 2304 (c) ( ) 41 U.S.C. 253 (c)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

SOLICITATION

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

C. E-MAIL ADDRESS

amanda.jones.39@us.af.mil

FA8102-23-R-2000

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

MP TACAN Antenna Kit

TBD 2023 - TBD 2028

Item No.

Firm Fixed Price From Quantity

U/I To Quantity Unit Price

EA

Quantity Range 1-4

1 EA 4 EA

Quantity Range 5-8

5 EA 8 EA

Quantity Range 9-16

9 EA 16 EA

Quantity Range 17-32

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

Antenna Kit (Antenna, Case, Cables, and Auxiliary Equipment) SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33

Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MIL-STD-130

Serial Number Required

MP TACAN Beacon Transponder Kit

TBD 2023 - TBD 2028

Item No.

Firm Fixed Price From Quantity

U/I To Quantity Unit Price

EA

Quantity Range 1-4

1 EA 4 EA

Quantity Range 5-8

5 EA 8 EA

Quantity Range 9-16

9 EA 16 EA

Quantity Range 17-32

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

Beacon Transponder, Case, Cables and Auxiliary Equipment SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33

Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MIL-STD-130

Serial Number Required

MP TACAN - Remote Control Status Unit (RCSU) Kit

TBD 2023 - TBD 2028

Item No.

Firm Fixed Price From Quantity

U/I To Quantity Unit Price

EA

Quantity Range 1-4

MP TACAN - Remote Control Status Unit (RCSU) Kit

TBD 2023 - TBD 2028

1 EA 4 EA

Quantity Range 5-8

5 EA 8 EA

Quantity Range 9-16

9 EA 16 EA

Quantity Range 17-32

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

RCSU Case, Cables, and Auxiliary Equipment SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33

Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MIL-STD-130

Serial Number Required

MP TACAN Assembly System (excludes Antenna, Transponder and RCSU)

TBD 2023 - TBD 2028

Item No.

Firm Fixed Price From Quantity

U/I To Quantity Unit Price

EA

Quantity Range 1-4

1 EA 4 EA

Quantity Range 5-8

5 EA 8 EA

Quantity Range 9-16

9 EA 16 EA

Quantity Range 17-32

MP TACAN Assembly System (excludes Antenna, Transponder and RCSU)

TBD 2023 - TBD 2028

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

Assembly System Kit(excludes Antenna, Transponder, and RCSU Kits) SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33

Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MIL-STD-130

Serial Number Required

Support Equipment and Tools

TBD 2023 - TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Support Equipment and Tool SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

Support Equipment and Tools

TBD 2023 - TBD 2024

IAW MIL-STD-130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Spares

TBD 2023 TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

MP TACAN Spares SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Training (Per Event)

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training Per Event SOW Paragraph 4, 5, 6.4.4, 6.4.5, 13, 22, 23, 25, 26, 28

MP TACAN Training (Per Event)

TBD 2023 TBD 2028

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

MP TACAN Training Vendor Location

TBD 2023 TBD 2028

Item No.

0007AA

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training Vendor Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

MP TACAN Training CONUS Location

TBD 2023 TBD 2028

Item No.

0007AB

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training CONUS Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

MP TACAN Training OCONUS Location

TBD 2023 TBD 2028

Item No.

0007AC

Firm Fixed Price Quantity U/I Unit Price Amount

EA

MP TACAN Training OCONUS Location

TBD 2023 TBD 2028

NSN: 5825

Training OCONUS Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

MP TACAN Travel

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Travel IAW H04 SOW Paragraph 4, 5, 7, 9.1.2, 9.1.5, 9.1.6, 9.1.9, 13, 22, 25, 26, 28

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2023 TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support SOW Paragraphs 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN ISS Replaceable Parts

TBD 2023 TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Supply Support (ISS) Replaceable Parts SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2023 TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2023 TBD 2024

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Per Event

TBD 2023 TBD 2024

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Per Event IAW H03 SOW Paragraph 4, 5, 6.4.5, 10, 16, 17, 21, 22, 24

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

MP TACAN Depot Stand Up Support (Organic)

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Depot Stand Up Support (Organic) SOW Paragraph 4, 5, 6.3, 6.4.4, 6.4.5, 6.4.6, 7, 8, 9.1.1, 9.1.2, 9.1.3, 9.1.5, 9.1.6, 9.1.8, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23, 25, 26, 27, 28, 29, 32

Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Technical Data Package CDRL A026 Exhibit A

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Technical Data Package CDRL A026 Exhibit A SOW Paragraph 11, 27, 29, 30, 31, 32, 33

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

MP TACAN Technical Orders CDRL A028 Exhibit B

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Technical Orders CDRL A028 Exhibit B SOW Paragraph 8.4.1, 9.1.2, 9.1.9.3, 12.2

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Technical Orders CDRL A047 Exhibit C

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Technical Orders CDRL A047 Exhibit C SOW Paragraph 9.1.2, 9.1.9.3, 12.2

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

MP TACAN CDRL 1423 Deliverables (Other DATA) Exhibit D

TBD 2023 TBD 2028

Item No.

Not Separately Priced Quantity U/I Unit Price

1 EA NSP

NSN: 5825

CDRL 1423 Deliverables (Other DATA) Exhibit D SOW Paragraph 23

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Increased Data Rights IAW CLIN 0014

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Increased Data Rights IAW Appendix 2 CDRL Assertion Matrix for CLIN 0014

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Increased Data Rights IAW CLIN 0015

TBD 2023 TBD 2028

Item No.

Firm Fixed Price

MP TACAN Increased Data Rights IAW CLIN 0015

TBD 2023 TBD 2028

Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Increased Data Rights IAW Appendix 2 CDRL Assertion Matrix for CLIN 0015

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Increased Data Rights IAW CLIN 0016

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

NSN: 5825

Increased Data Rights IAW Appendix 2 CDRL Assertion Matrix for CLIN 0016

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Increased Data Rights IAW CLIN 0017

TBD 2023 TBD 2028

Item No.

Firm Fixed Price

1 EA

MP TACAN Increased Data Rights IAW CLIN 0017

TBD 2023 TBD 2028

NSN: 5825

Increased Data Rights Appendix 2 CDRL Assertion Matrix for CLIN 0017

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

MP TACAN Delivery Incentive/Disincentive Terms

TBD 2023 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

IAW H05 Delivery Incentive/Disincentive Terms Maximum Quantity 3

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection Buy American Act/Balance of Payments Program

MP TACAN Support Equipment and Tools

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Support Equipment and Tools SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required

MP TACAN Support Equipment and Tools

TBD 2024 TBD 2025

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Spares

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

MP TACAN Spares SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

SubCLINs will be added for each part proposed

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support SOW Paragraphs 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 90012008 2008

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Supply Support (ISS) Replaceable Parts SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2024 TBD 2025

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 90012008 2008

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Per Event

TBD 2024 TBD 2025

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Per Event IAW H03

SOW Paragraph 4, 5, 6.4.5, 10, 16, 17, 21, 22, 24

MP TACAN Per Event

TBD 2024 TBD 2025

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Support Equipment and Tools

TBD 2025 TBD 2026

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Support Equipment and Tools SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

SubCLINs will be added for each part proposed

MP TACAN Spares

TBD 2025 TBD 2026

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

MP TACAN Spares SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2025 TBD 2026

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support SOW Paragraphs 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2025 TBD 2026

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2025 TBD 2026

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Supply Support (ISS) Replaceable Parts SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2025 TBD 2026

Item No.

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2025 TBD 2026

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Per Event

TBD 2025 TBD 2026

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Per Event IAW H03 SOW Paragraph 4, 5, 6.4.5, 10, 16, 17, 21, 22, 24

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 90012008 2008

AS9100 9100

MP TACAN Per Event

TBD 2025 TBD 2026

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Support Equipment and Tools

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Support Equipment and Tools SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Spares

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

MP TACAN Spares SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

MP TACAN Spares

TBD 2026 TBD 2027

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Supply Support (ISS) Replaceable Parts SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2026 TBD 2027

Title Number Date Tailoring

ISO 90012008 2008

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Per Event

TBD 2026 TBD 2027

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Per Event IAW H03 SOW Paragraph 4, 5, 6.4.5, 10, 16, 17, 21, 22, 24

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

MP TACAN Support Equipment and Tools

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

NSN: 5825

MP TACAN Support Equipment and Tools

TBD 2027 TBD 2028

Support Equipment and Tools SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Spares

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

MP TACAN Spares SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

MP TACAN Spares

TBD 2027 TBD 2028

Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support SOW Paragraphs 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Supply Support (ISS) Replaceable Parts SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2027 TBD 2028

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

MP TACAN Engineering Change Proposal (ECP) per Event

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

MP TACAN Per Event

TBD 2027 TBD 2028

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Per Event IAW H03 SOW Paragraph 4, 5, 6.4.5, 10, 16, 17, 21, 22, 24

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

OPTION 1 MP TACAN Antenna Kit

TBD 2028 TBD 2030

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

EA

Quantity Range

1 EA 4 EA

Quantity Range

5 EA 8 EA

Quantity Range

9 EA 16 EA

Quantity Range

17 EA 32 EA

Quantity Range 33+

33 EA

OPTION 1 MP TACAN Antenna Kit

TBD 2028 TBD 2030

Antenna Kit (Antenna, Case, Cables, and Auxiliary Equipment) SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

OPTION 1 Beacon Transponder Kit

TBD 2028 TBD 2030

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

EA

Quantity Range

1 EA 4 EA

Quantity Range

5 EA 8 EA

Quantity Range

9 EA 16 EA

Quantity Range

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

Beacon Transponder, Case, Cables and Auxilary Equipment SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, Limitations of Liability: High Value Item

OPTION 1 Beacon Transponder Kit

TBD 2028 TBD 2030

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

OPTION 1 MP TACAN Remote Control Status Unit (RCSU) Kit

TBD 2028 TBD 2030

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

EA

Quantity Range

1 EA 4 EA

Quantity Range

5 EA 8 EA

Quantity Range

9 EA 16 EA

Quantity Range

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

RCSU Case, Cables, and Auxiliary Equipment SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination

OPTION 1 MP TACAN Remote Control Status Unit (RCSU) Kit

TBD 2028 TBD 2030

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

OPTION 1 MP TACAN Assembly System (excludes Antenna, Transponder and RCSU)

TBD 2028 TBD 2030

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

EA

Quantity Range

1 EA 4 EA

Quantity Range

5 EA 8 EA

Quantity Range

9 EA 16 EA

Quantity Range

17 EA 32 EA

Quantity Range 33+

33 EA

NSN: 5825

Assembly System Kit(excludes Antenna, Transponder, and RCSU Kits) SOW Paragraphs 4, 5, 6.1, 6.2, 6.3, 6.4.1, 6.4.2, 6.4.3, 6.4.5, 7, 8, 9, 11, 12, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, Limitations of Liability: High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

OPTION 1 MP TACAN Assembly System (excludes Antenna, Transponder and RCSU)

TBD 2028 TBD 2030

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

OPTION 1 MP TACAN Support Equipment and Tools

TBD 2028 TBD 2029

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Support Equipment and Tools SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7., 8.5, 9, 11, 12, 14, 15, 16, 17, 18, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part proposed

OPTION 1 MP TACAN Spares

TBD 2028 TBD 2029

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

MP TACAN Spares

OPTION 1 MP TACAN Spares

TBD 2028 TBD 2029

SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.4, 6.4.5, 7, 8.5, 9.1.1.1, 9.1.5, 9.1.6, 9.1.7, 9.1.8, 16, 17, 19, 21, 22, 23

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

Special Marking Instructions Below Serial Number Required

SubCLINs will be added for each part proposed

OPTION 1 MP TACAN Training (Per Event)

TBD 2028 TBD 2030

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training (per event) SOW Paragraph 4, 5, 6.4.4, 6.4.5, 13, 22, 23, 25, 26, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

OPTION 1 MP TACAN Training Vendor Location

TBD 2028 TBD 2030

Item No.

5007AA

Firm Fixed Price

OPTION 1 MP TACAN Training Vendor Location

TBD 2028 TBD 2030

NSN: 5825

Training Vendor Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

OPTION 1 MP TACAN Training CONUS Location

TBD 2028 TBD 2030

Item No.

5007AB

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training CONUS Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

OPTION 1 MP TACAN Training OCONUS Location

TBD 2028 TBD 2030

Item No.

5007AC

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Training OCONUS Location

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

OPTION 1 MP TACAN Travel

TBD 2028 TBD 2030

Item No.

Firm Fixed Price

OPTION 1 MP TACAN Travel

TBD 2028 TBD 2030

EA

NSN: 5825

Travel IAW H04 SOW Paragraph 4, 5, 7, 9.1.2, 9.1.5, 9.1.6, 9.1.9, 13, 22, 25, 26, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Quality Assurance: Certificate of Conformance Buy American Act/Balance of Payments Program

OPTION 1 MP TACAN Interim Contractor Support (ICS) Maintenance/Software Support

TBD 2028 TBD 2029

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

NSN: 5825

Interim Contractor Support (ICS) Maintenance/Software Support SOW Paragraphs 9.1.9, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

SubCLINs will be added for each part/LRU/SRU proposed

OPTION 1 MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2028 TBD 2029

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

MO

Interim Supply Support (ISS) Replaceable Parts

OPTION 1 MP TACAN Interim Supply Support (ISS) Replaceable Parts

TBD 2028 TBD 2029

SOW Paragraph 6.4.1, 6.4.5, 9.1.9, 16, 17, 21, 22, 23, 28

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MILSTD130

Serial Number Required

SubCLINs will be added for each part/LRU/SRU proposed

OPTION 1 MP TACAN Engineering Change Proposal (ECP) Per Event

TBD 2028 TBD 2029

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA

NSN: 5825

Engineering Change Proposal (ECP) per Event IAW H02 SOW Paragraph 4, 5, 6.3, 6.4.1, 6.4.5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 26, 29

Limitations of Liability: High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Warranty Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001:2015

AS9100 9100

NATO AQAP AQAP 2070

Buy American Act/Balance of Payments Program

Physical Item Markings:

OPTION 1 MP TACAN Engineering Change Proposal (ECP) Per Event

TBD 2028…