LEE_Salient_Characteristics_18_Apr_2013FINAL_for_AFSFC_SFX_Approval.pdf

US Air Force Force Protection Commodity Council

Law Enforcement Equipment Requirements

US Air Force - Law Enforcement Equipment Requirements

Black Nylon Gear/Accessories

1. Black Nylon Utility Belt: Molded, 2-1/4" wide; multiple sizes (small, medium, large and extra-large); adjustable; multi-release buckle for added security (minimum of two release points); 100% ballistic nylon outer shell with inner core that provides rigidity; minimum of 1000 Denier; fade/scratch-resistant; water resistant; hand washable.

2. Black Nylon Utility Belt Keepers: Fits 2-1/4” wide utility belt; 100% ballistic nylon;

minimum of 1000 Denier; has two metal snap closures on each keeper; fade/scratch resistant;

water resistant; hand washable.

3. Black Nylon Handcuff Case: Holds one set of handcuffs; fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; 100% ballistic nylon outer shell; minimum of 1000 Denier; soft lining to protect cuffs; molded to keep its shape when cuffs are removed; single metal snap closure; fade/scratch resistant; water resistant; hand washable.

4. Black Nylon Radio Case: Fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; fits inside dimensions of 2.75” W x 1.5” D x 7.5” L; two-piece adjustable belt mount that swivels for quick detachment; adjustable elastic tie-down with metal snap closure;

100% ballistic nylon outer shell; minimum of 1000 Denier; soft lining to protect radio; molded to keep its shape when radio is removed; fade/scratch resistant; water resistant; hand washable.

5. Black Nylon M9 (9mm) Ammo Pouch: Single pouch; holds one 15 round M9 Beretta

(military model 92F) 9mm magazine; fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; 100% ballistic nylon outer shell; minimum of 1000 Denier; soft lining to protect magazine; molded to keep its shape when magazine is removed; metal snap closure;

fade/scratch resistant; water resistant; hand washable.

6. Black Nylon M4 Magazine Pouch: Holds three, 5.56mm, 30 round magazines in a stackable configuration; fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop;

100% ballistic nylon outer shell; minimum of 1000 Denier; requires either metal snap closure or buckle release closure; positive retention must be maintained for one magazine, up to three magazines; fade/scratch resistant; water resistant; hand washable.

7. Black Nylon Chemical Spray Holder: Must hold the MK-4, Z-305, 4oz dispenser; must allow for canister 6.25” in height and 1.50” in diameter; fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; 100% ballistic nylon outer shell with polymer insert to prevent canister damage; minimum of 1000 Denier; molded to keep its shape when spray dispenser is removed; remains open as needed for one-hand operation; metal snap closure; fade/scratch resistant; water resistant; hand washable.

8. Black Expandable Baton Holder: Fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; 100% ballistic nylon outer shell; minimum of 1000 Denier; soft lining to protect baton; molded to keep its shape when baton is removed; Securely holds 21” telescoping expandable baton; minimum depth of 5” and maximum depth of 5-1/2”; requires positive retention capability, e.g. retention teeth, snug fit, etc; fade/scratch resistant; water resistant; hand washable.

9. Black Nylon Silent Key Ring Holder: Fits 2-1/4” wide utility belt through the use of a 100% to protect keys; hook and loop closure; fade/scratch resistant; water resistant; hand washable.

10. Black Nylon Glove Pouch/Case: Fits 2-1/4” wide utility belt through the use of a 100% to protect item(s); molded to keep its shape when item(s) removed; metal snap closure;

fade/scratch resistant; water resistant; hand washable; should hold at least two pairs of 5 mil Nitrile protective gloves.

Common DoD Civilian & Military Items

1. Whistle: Nickel-plated police whistle; synthetic cork or plastic ball; tapered mouthpiece;

capable of producing a high pitch; must work when wet; adjustable black nylon lanyard included.

2. Expandable Baton: Steel construction; telescoping; black chrome plating; minimum of 7-1/2”, maximum of 9” when closed; rapidly extends to 21” in length; locking system that firmly locks baton in place when fully extended; handle provides a positive gripping surface.

3. Handcuffs: Nickel-plated; steel construction; minimum of 19 locking positions; maximum of two heat-treated steel connecting links that swivel; double locking pin system; minimum inner perimeter range must measure between 5.75” through 8;” includes minimum of two keys;

handcuffs must meet or exceed U.S. National Institute of Justice standard (NIJ 0307.01)

4. Mini Flashlight and Black Nylon Holder: Black in color; tested lumen value minimum of 41.0; minimum of 1.0 watt LED lamp module capable of 10K hrs; minimum of 40 hrs battery burn time; tail switch that provides constant on/off or momentary action; CNC-machined aluminum with deep knurled grip; multi-colored lenses included (red, green and blue as a minimum); water resistant; safety lockout switch that prevents inadvertent switching; holder fits 2-1/4” wide utility belt through the use of a 100% ballistic nylon belt loop; holder constructed of 100% ballistic nylon outer shell with a minimum of 1000 Denier and soft lining to protect mini flashlight; shall use a standard, nonproprietary battery(s) that is/are readily available off the shelf (standard batteries are defined as size AAA, AA, C, and D batteries); battery(s) is/are not required but, if included, must be shippable OCONUS.

5. Safariland Model 6005 SLS Tactical Holster w/ Quick Release Leg Harness (Part # 6005- 73-121 (Right-handed) & 6005-73-122 (Left-handed)): Tactical Black color; holds the M9 Beretta/Military model 92F; Safariland 6005 SLS with drop leg platform is the standardized holster for Security Forces; needs to be available in both right-and left-handed configurations.

6. Safariland Quick Locking System (QLS) Kit for 6005 SLS (Part # QUICK-KIT4-2):

Tactical Black in color; kit must include qty. one (1) QLS-19 and qty. two (2) QLS-22L; the QLS-19 must also be available for individual purchase.

7. Safariland Small MOLLE Adapter Plate (Part # 6004-8-13): Tactical black in color; small plate that can be attached to the Improved Outer Tactical Vest (IOTV) to accommodate a chest mount holster configuration.

8. Safariland UBL Mid-Ride Belt Loop Adapter (Part # 6070UBL-2): Belt loop adapter designed to accommodate a hip mount configuration; tactical black in color; fits Safariland 6005 SLS holster.

9. Concealable Body Armor - Ballistic: Carrier shall be black in color; as a minimum, sizes shall include small (S), medium (M), large (L) extra-large (XL) and double extra-large (XXL) with each of these sizes available in a regular and long length; moisture wicking and antimicrobial liner; ballistic inserts must be compliant with NIJ Std 0101.06 (www.nij.gov – Compliant Armor: Body Armor that complies with NIJ Ballistic Resistance Standard, 0101.06); rated for Type IIIA and capable of being removed from carrier; body armor models must be tested by the NIJ Compliance Testing Program and be listed on the NIJ Compliant Products List; ballistic inserts must provide side protection; carrier must be able to support additional soft or hard trauma plate; sizes available for both male and female (female and male sizes must be specifically designed for females and males; unisex vests are not acceptable); must provide ability to separately measure and fit female and male officers; carrier must be fully adjustable with hook and loop type fastener through the sides and shoulder areas; shoulder straps must have some type of additional padding or foam strapping for comfort; ballistic insert service life must be a minimum of five years (the start of the service life is defined as the date of manufacture); carrier must be easily cleaned and support being laundered; carrier service life must be equal to or greater than one year (the start of the service life is defined as the date of manufacture); body armor must be capable of being worn under the Air Force blue uniform shirt; when properly fitted, must not ride up or shift while being worn; and single system must include additional set of shoulder and side hook and loop fasteners.

http://www.nij.gov/

Vehicle Patrol Kit - A complete kit includes: Reflective Traffic/Safety Vest (2); Expandable Cones with Lights (1 pack of 4); Traffic Wand (2); Disposable FLEX Cuffs (1 pack of 10); FLEX Cuff Cutter (1); Flashlight/Heavy Duty Rechargeable (1); Punch Hammer with Seat Belt Cutter (1);

First Responder First Aid/Bloodborne Pathogen Kit (1); and Container/Organizer (1).

Characteristics for each item:

1. Reflective Traffic/Safety Vest: Blue in color with yellow reflective tape or fluorescent yellow in color with silver/grey reflective tape; complies with American National Standards Institute (ANSI) Class 2 safety vest requirements; easy-to-clean vinyl coated mesh fabric; hook and loop adjustable side straps and closure; one size fits all; minimum width of 1-1/2” to maximum width of 2-1/2” reflective tape with two vertical reflective stripes and one horizontal reflective stripe on front and back.

2. Expandable Traffic Cones With Lights (Minimum of 4 per Pack): Bright orange in color;

reflective cone collar; made of durable flexible mesh material; flexible spring allows cone to automatically self-deploy/expand to no smaller than 28” in height; base holds cone in place and grips the road for added stability; collapses flat for storage; internal LED with two settings, steady and flashing; shall use a standard, nonproprietary battery(s) that is/are readily available off the shelf (standard batteries are defined as size AAA, AA, C, and D batteries); battery(s) is/are not required but, if included, must be shippable OCONUS.

3. Flex Cuffs (Minimum of 10 per Pack): White in color; double loop; minimum of 33” long x

1/2” inches wide; rounded edges to prevent abrasion; minimum of 350 lb. tensile strength; have a self-locking mechanism in the center of each end that will firmly holds wrist, arm and/or ankle.

4. Traffic Wand: Eight (8) LED lights; minimum of two flash patterns and steady burn; click on/off button; wand can be converted into white flashlight; highly visible both day and night;

Polycarbonate diffuser to enhance red light output; minimum length of 13" and maximum length of 20”; shall use a standard, nonproprietary battery(s) that is/are readily available off the shelf (standard batteries are defined as size AAA, AA, C, and D batteries); battery(s) is/are not required but, if included, must be shippable OCONUS.

5. Flex Cuff Cutters: Compact; lightweight; steel construction; can be safely used with one hand;

specifically designed for removal of disposable restraints.

6. Rechargeable Heavy Duty Flashlight/Spotlight: Utilizes light-emitting diode (LED) light source; rechargeable; includes AC220V-110V/DC 12V charger; shock-absorbing internal battery module; minimum 1,000,000 candlepower; provides minimum of 2-hour run time on full charge; unbreakable ABS body with polycarbonate lens and thermoplastic rubber shroud;

weatherproof; includes battery; battery must be able to be shipped OCONUS.

7. Punch Hammer With Seatbelt Cutter: One tool that must combine the function of a seatbelt cutter and window punch hammer; stainless steel blade that folds into handle for safety; window punch made of stainless steel and spring loaded; tool handle must be made of non-corroding material to prevent rust and malfunction, be able to operate under harsh environmental conditions, e.g., underwater in fresh/salt water, extreme cold and heat, etc; safe to carry in pocket; minimum length of 4” when closed and maximum length 7” when open.

8. First Responder First Aid/Bloodborne Pathogen Kit: Nylon Carry bag no larger than 18” X

12” X 9”; primarily red in color; containing the following: 1 Protective Suit (size L); 1 safety glasses, polycarbonate construction, one size fits all, lightweight, provides protection to both front and side of eye; 1 N95 surgical mask; 1 CPR Mask;1 Burn Pad (4" x 4"); 16 Band-aids (1" x 3"); 1 Abdominal Pad (5" x 9"); 10 Gauze Pads (4" x 4"); 1 Blood Stopper; 1 Gauze Roll (3");

1 Gauze Roll (4"); 1 Roll Waterproof Tape (1"); 1 Roll Waterproof Tape (0.5"); 1 Elastic Bandage (3"); 2 Triangular Bandages, 40" X 40" X 56" ; 4 Eye Pads; 10 Alcohol Wipes; 10 Antimicrobial Wipes; 1 Instrument Pack (shears, tweezers, bandage scissors, penlight); 2 Small Self-activated Cold Packs; 1 Emergency Blanket that provides compact emergency protection in all weather conditions, made of durable insulating mylar material, retains/reflects back 90% of body heat, reusable, waterproof and windproof, 52" X 84"; 2 Pairs Nitrile Gloves (Large) 13 mil thick; 1 Eye Wash (4 oz); 1 Sharps Container, one quart in size, red in color with clear top; and 1 First Aid Book.

9. Container/Organizer: Size: No larger than 8.5" H x 40" W x 19" D; holds patrol kit items

(items 1. through 8. above), all of which must fit in the container/organizer; must contain movable dividers that will keep items separated for ease of access to items and use in emergency situations; durable construction that resists scratches; handles on sides for easy removal from trunk; ability to be locked for added security; black in color.

LE Crime Scene Kit - A complete kit includes: 100-count Paper Evidence Bags (1); 1,000 ft roll Police Crime Scene Tape (3); 30 ft roll Photo Tape with Evidence Scale (1); 100 ft Tape Measure (1); 3-piece (minimum) Crime Scene Reflective Chalk (1); 100-count Nitrile Gloves (1 box of each size: small, medium, and large); Container/Organizer (1). Characteristics for each item:

1. Paper Evidence Bags: Pre-printed with chain of custody/possession template; ability to close and reopen the Paper Evidence Bag utilizing the same fasteners; minimum height of 13" x 7" width; minimum of 100 per pack.

2. Police/Crime Scene Tape: Three 1,000 foot rolls of 3” wide 3-mil thick vinyl tape; easy-to-read black block letters with one of the following repeating phrases: “POLICE LINE DO NOT ENTER” or “POLICE LINE DO NOT CROSS”; distance between phrases no farther than 16” apart; each roll must come in its own dispenser box.

3. Photo Tape With Evidence Scale (1 Roll): Yellow or white in color; minimum width of 1” maximum width of 1.5” by 30-foot roll; repeating, alternating black and white pattern throughout the scale every 12” for better visualization in distance photography; must have a non-permanent adhesive backing; can be applied and removed without damaging the evidence;

units of measurement include centimeters on one edge and inches on the other.

4. Tape Measure: 100 feet in length; 1/2" width; open reel; long-line fiberglass tape measure;

easy-grip handles; ABS case/frame; waterproof; rewind handle with rotating fingertip knob;

positioning point; hook ring end is corrosion resistant; graduated in feet, inches and 1/8 inches.

5. Crime Scene Reflective Chalk (Minimum of 3 Pieces): 1 pack with a minimum of 3 pieces per pack; minimum diameter of 1” maximum diameter of 2”; minimum length of 4” maximum length of 5”; creates highly reflective marks that are illuminated by photo flash or flashlight (appears extremely bright in flash photographs); can be seen at night.

6. Non-Irritating Nitrile Gloves: 5 mil thick; beaded cuff; seamless; powder free; ambidextrous;

100-count boxes; sizes: small, medium and large.

7. Container/Organizer: No larger than 8.5" H x 40" W x 19" D; holds Crime Scene Kit items (items 1. through 6. above), all of which must fit in the Crime Scene Kit; must contain movable dividers that will keep items separated for ease of access during crime scene investigations;

durable construction that resists scratches; handles on sides for easy removal from trunk; ability to be locked for added security; black in color.