AF_Law_Enforcement_Requirements_Acceptability_Checklist_Rev_9_-_Vendor_FINAL_3_Jun_2013.xlsx
XLSX spreadsheet 139 KB Posted
- Attached to
- LEE, Vehicle Patrol Kit, Category 3
- Solicitation number
- FA8003-13-R-0002
About this file
AF Law Enforcement Acceptability Checklist
View the file
Other files
Show 40 more
Latest 50 of 78 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LEE Req Acceptability Checklist Law Enforcement Equipment Requirements Acceptability Checklist
***** BEST VIEWED AT 80% ZOOM OR HIGHER****
TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQURIEMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE
INSTRUCTIONS:
SECTION A: (1) ALL OFFERORS must complete cells in Rows 6 AND 7 highlighted in yellow. (2) If your business size is large AND your proposal value is greater than $650,000, complete cells in Rows 9 and 10 highlighted in yellow.
| SECTION B: For each law enforcement equipment category in which you intend to submit a proposal, ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN COLUMN G. Failure to respond to every requirement for a category in which you are submitting a proposal (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination for the entire category. | Acceptable/Unacceptable | Rationale for Unacceptable Score | |||||
| SECTION A | |||||||
| Category | SECTION A | ||||||
| Requirement Description | Offeror Name | Offeror Address | Point of Contact Name | POC email & phone | Business Size |
(specify either Large or Small)
| Offeror Information | Offeror Name & Business Size |
| OI 1.1 | Total proposal value |
| OI 1.2 | If business size is Small, OR business size is Large AND total proposal value is less than or equal to $650,000, proceed to Row 15, Cell C15, Black Nylon Utility Belt - CLIN #'s 0001 - 0004 |
| OI 1.3 | If business size is Large and total proposal value is greater than $650,000, submit small business subcontracting plan, AND specify where plan is located in proposal |
| OI 1.4 | If agency goals are not achievable for this RFP, submit an explanation and plans for achieving agency goals. Specify where explanation is located in proposal. Agency goals are: |
Small Business: 23% HUBZone Small Business: 3% Service-Disabled Veteran-Owned Small Business: 3% Small Disadvantaged Business: 5% Women-Owned Small Business: 5% Law Enforcement Equipment Requirements Acceptability Checklist
Category Legend:
BNG: Black Nylon Gear COMM: Common DoD Civilian & Military Items VPK: Vehicle Patrol Kit CSK: LE Crime Scene Kit Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY CELL FOR A GIVEN CATEGORY WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
| SECTION B | |||
| Category | SECTION B | ||
| Requirement Description | Manufacturer Name | Product Name | Manufacturer |
| Part Number | Offeror | ||
| Part or Item Number | Reference | ||
| Black Nylon Gear/Accessories | Black Nylon Utility Belt - CLIN #'s 0001 - 0004 | ||
| BNG 1.1 | Molded | ||
| BNG 1.2 | 2-1/4" wide | ||
| BNG 1.3 | Multiple sizes (small, medium, large and extra-large) | ||
| BNG 1.4 | Adjustable | ||
| BNG 1.5 | Multi-release buckle (minimum of two release points) | ||
| BNG 1.6 | 100% ballistic nylon outer shell | ||
| BNG 1.7 | Inner core that provides rigidity | ||
| BNG 1.8 | Minimum of 1000 Denier | ||
| BNG 1.9 | Fade/Scratch-Resistant | ||
| BNG 1.10 | Water Resistant | ||
| BNG 1.11 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Utility Belt Keepers - CLIN # 0005 | ||
| BNG 2.1 | Fits 2-1/4" wide utility belt | ||
| BNG 2.2 | 100% ballistic nylon | ||
| BNG 2.3 | Minimum of 1000 Denier | ||
| BNG 2.4 | Two metal snap closures | ||
| BNG 2.5 | Fade/Scratch-Resistant | ||
| BNG 2.6 | Water Resistant | ||
| BNG 2.7 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Handcuff Case - CLIN # 0006 | ||
| BNG 3.1 | Holds one set of handcuffs | ||
| BNG 3.2 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 3.3 | 100% ballistic nylon outer shell | ||
| BNG 3.4 | Minimum of 1000 Denier | ||
| BNG 3.5 | Soft lining to protect cuffs | ||
| BNG 3.6 | Molded to keep its shape when cuffs are removed | ||
| BNG 3.7 | Single metal snap closure | ||
| BNG 3.8 | Fade/Scratch-Resistant | ||
| BNG 3.9 | Water Resistant | ||
| BNG 3.10 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Radio Case - CLIN # 0007 | ||
| BNG 4.1 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 4.2 | Fits inside dimensions of 2.75"W x 1.5"D x 7.5"L | ||
| BNG 4.3 | Two-piece adjustable belt mount swivels for quick detachment | ||
| BNG 4.4 | Adjustable elastic tie-down with metal snap closure | ||
| BNG 4.5 | 100% ballistic nylon outer shell | ||
| BNG 4.6 | Minimum of 1000 Denier | ||
| BNG 4.7 | Soft lining to protect radio | ||
| BNG 4.8 | Molded to keep its shape when radio is removed | ||
| BNG 4.9 | Fade/Scratch-Resistant | ||
| BNG 4.10 | Water Resistant | ||
| BNG 4.11 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon M9 (9mm) Ammo Pouch - CLIN # 0008 | ||
| BNG 5.1 | Single Pouch | ||
| BNG 5.2 | Holds one 15 round M9 Beretta (military model 92F) 9mm magazine | ||
| BNG 5.3 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 5.4 | 100% ballistic nylon outer shell | ||
| BNG 5.5 | Minimum of 1000 Denier | ||
| BNG 5.6 | Soft lining to protect magazine | ||
| BNG 5.7 | Molded to keep its shape when magazine is removed | ||
| BNG 5.8 | Metal snap closure | ||
| BNG 5.9 | Fade/Scratch-Resistant | ||
| BNG 5.10 | Water Resistant | ||
| BNG 5.11 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon M4 Magazine Pouch - CLIN # 0009 | ||
| BNG 6.1 | Holds three 5.56mm, 30 round magazines in a stackable configuration | ||
| BNG 6.2 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 6.3 | 100% ballistic nylon outer shell | ||
| BNG 6.4 | Minimum of 1000 Denier | ||
| BNG 6.5 | Requires either metal snap closure or buckle release closure | ||
| BNG 6.6 | Postitive retention must be maintained for one magazine, up to three magazines | ||
| BNG 6.7 | Fade/Scratch-Resistant | ||
| BNG 6.8 | Water Resistant | ||
| BNG 6.9 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Chemical Spray Holder - CLIN # 0010 | ||
| BNG 7.1 | Must hold the MK-4 4oz dispenser | ||
| BNG 7.2 | Must allow for canister 6.25" in height and 1.50" in diameter | ||
| BNG 7.3 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 7.4 | 100% ballistic nylon outer shell | ||
| BNG 7.5 | Polymer insert to prevent canister damage | ||
| BNG 7.6 | Minimum of 1000 Denier | ||
| BNG 7.7 | Molded to keep its shape when spray dispenser is removed | ||
| BNG 7.8 | Remains open as needed for one-hand operation | ||
| BNG 7.9 | Metal snap closure | ||
| BNG 7.10 | Fade/Scratch-Resistant | ||
| BNG 7.11 | Water Resistant | ||
| BNG 7.12 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Expandable Baton Holder - CLIN # 0011 | ||
| BNG 8.1 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 8.2 | 100% ballistic nylon outer shell | ||
| BNG 8.3 | Minimum of 1000 Denier | ||
| BNG 8.4 | Soft lining to protect baton | ||
| BNG 8.5 | Molded to keep its shape when baton is removed | ||
| BNG 8.6 | Securely holds 21" telescoping expandable baton | ||
| BNG 8.7 | Minimum depth of 5" and maximum depth of 5-1/2" | ||
| BNG 8.8 | Requires positive retention capability e.g. retention teeth, snug fit, etc. | ||
| BNG 8.9 | Fade/Scratch-Resistant | ||
| BNG 8.10 | Water Resistant | ||
| BNG 8.11 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Silent Key Ring Holder - CLIN # 0012 | ||
| BNG 9.1 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 9.2 | 100% ballistic nylon outer shell | ||
| BNG 9.3 | Minimum of 1000 Denier | ||
| BNG 9.4 | Soft lining to protect keys | ||
| BNG 9.5 | Hook and loop closure | ||
| BNG 9.6 | Fade/Scratch-Resistant | ||
| BNG 9.7 | Water Resistant | ||
| BNG 9.8 | Hand Washable | ||
| Black Nylon Gear/Accessories | Black Nylon Glove Pouch/Case - CLIN # 0013 | ||
| BNG 10.1 | Fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| BNG 10.2 | 100% ballistic nylon outer shell | ||
| BNG 10.3 | Minimum of 1000 Denier | ||
| BNG 10.4 | Soft lining to protect item(s) | ||
| BNG 10.5 | Molded to keep its shape when item(s) removed | ||
| BNG 10.6 | Metal snap closure | ||
| BNG 10.7 | Fade/Scratch-Resistant | ||
| BNG 10.8 | Water Resistant | ||
| BNG 10.9 | Hand Washable | ||
| BNG 10.10 | Should hold at least two pairs of 5 mil Nitrile protective gloves | ||
| Common DoD Civilian & Military Items | Whistle - CLIN # 0014 | ||
| COMM 1.1 | Nickel-plated police whistle | ||
| COMM 1.2 | Synthetic cork or plastic ball | ||
| COMM 1.3 | Tapered mouthpiece | ||
| COMM 1.4 | Capable of producing a high pitch | ||
| COMM 1.5 | Must work when wet | ||
| COMM 1.6 | Adjustable black nylon lanyard included | ||
| Common DoD Civilian & Military Items | Expandable Baton - CLIN # 0015 | ||
| COMM 2.1 | Steel construction | ||
| COMM 2.2 | Telescoping | ||
| COMM 2.3 | Black chrome plating | ||
| COMM 2.4 | Minimum length of 7-1/2" to maximum length of 9" when closed | ||
| COMM 2.5 | Rapildy extends to 21" in length | ||
| COMM 2.6 | Locking system that firmly locks baton in place when fully extended | ||
| COMM 2.7 | Handle provides a positive gripping surface | ||
| Common DoD Civilian & Military Items | Handcuffs - CLIN # 0016 | ||
| COMM 3.1 | Nickel plated | ||
| COMM 3.2 | Steel construction | ||
| COMM 3.3 | Minimum of 19 locking positions | ||
| COMM 3.4 | Maximum of two heat-treated steel connecting links | ||
| COMM 3.5 | Links must swivel | ||
| COMM 3.6 | Double locking pin system | ||
| COMM 3.7 | Minimum inner perimeter range must measure between 5.75" through 8" | ||
| COMM 3.8 | Includes minimum of two keys | ||
| COMM 3.9 | Must meet or exceed U.S. National Institute of Justice standard 0307.01 (NIJ 0307.01) | ||
| Common DoD Civilian & Military Items | Mini Flashlight and Black Nylon Holder - CLIN # 0017 | ||
| COMM 4.1 | Black in color | ||
| COMM 4.2 | Tested lumen value minimum of 41.0 | ||
| COMM 4.3 | Minimum of 1.0 watt LED lamp module capable of 10K hrs | ||
| COMM 4.4 | Minimum of 3 hours battery burn time | ||
| COMM 4.5 | Tail switch that provides constant on/off or momentary action | ||
| COMM 4.6 | CNC-machined aluminum construction | ||
| COMM 4.7 | Deep knurled grip | ||
| COMM 4.8 | Safety lockout switch that prevents inadvertent switching | ||
| COMM 4.9 | Holder fits 2-1/4" wide utility belt through the use of a 100% ballistic nylon belt loop | ||
| COMM 4.10 | Holder constructed of 100% ballistic nylon outer shell | ||
| COMM 4.11 | Holder must be minimum of 1000 Denier | ||
| COMM 4.12 | Holder must have soft lining to protect mini flashlight | ||
| COMM 4.13 | Shall use a standard, nonproprietary battery(s) that is/are readily available off the shelf (defined as size AAA, AA, C and D) | ||
| COMM 4.14 | Battery(s) is/are not required but, if included, must be shippable OCONUS | ||
| Common DoD Civilian & Military Items | Safariland Model 6005 SLS Tactical Holster w/ Quick Release Leg Harness (Part # 6005-73-121 (Right-handed) & 6005-73-122 (Left-handed)) - CLIN #'s 0018 - 0019 | ||
| COMM 5.1 | Tactical black color | ||
| COMM 5.2 | Holds the M9 Beretta/Military model 92F | ||
| COMM 5.3 | Safariland 6005 SLS with drop leg platform | ||
| COMM 5.4 | Available in both left and right handed configurations | ||
| Common DoD Civilian & Military Items | Safariland Quick Locking System (QLS) Kit for 6005 SLS (Part # QUICK-KIT4-2) - CLIN # 0020 | ||
| COMM 6.1 | Tactical black in color | ||
| COMM 6.2 | Includes one (1) QLS-19 which must be available for individual purchase | ||
| COMM 6.3 | Includes two (2) QLS-22L | ||
| Common DoD Civilian & Military Items | Safariland QLS-19 Duty Holster Locking Fork - CLIN # 0021 | ||
| COMM 6.4 | Avalilable for standalone purchase | ||
| Common DoD Civilian & Military Items | Safariland Small MOLLE Adapter Plate (Part # 6004-8-13) - CLIN # 0022 | ||
| COMM 7.1 | Black in color | ||
| COMM 7.2 | Small plate that can be attached to the Improved Outer Tactical Vest (IOTV) to accommodate a chest mount holster configuration | ||
| Common DoD Civilian & Military Items | Safariland UBL Mid-Ride Belt Loop Adapter (Part # 6070UBL-2) - CLIN # 0023 | ||
| COMM 8.1 | Belt loop adapter designed to to accommodate a hip mounted holster configuration | ||
| COMM 8.2 | Tactical black | ||
| COMM 8.3 | Fits Safariland 6005 SLS holster | ||
| Common DoD Civilian & Military Items | Concealable Body Armor - Ballistic (Male) - CLIN #'s 0024 - 0033 | ||
| COMM 9.1 | Black in color | ||
| COMM 9.2 | Available in regular length in minimum sizes shall include small (S), medium (M), large, (L), extra-large (XL), and double extra-large (XXL) | ||
| COMM 9.3 | Available in long length in minimum sizes shall include small (S), medium (M), large, (L), extra-large (XL), and double extra-large (XXL) | ||
| COMM 9.4 | Moisture wicking and antimicrobial liner | ||
| COMM 9.5 | Ballistic inserts must be compliant with NIJ Std 0101.06 (www.nij.gov) | ||
| COMM 9.6 | Proposed body armor model must have been tested by the NIJ Compliance Testing Program | ||
| COMM 9.7 | Proposed body armor model must be listed on the NIJ Compliant Products List | ||
| COMM 9.8 | Ballistic inserts are rated for Type IIIA threat protection | ||
| COMM 9.9 | Ballistic inserts are capable of being removed from carrier | ||
| COMM 9.10 | Ballistic inserts must provide side protection | ||
| COMM 9.11 | Carrier must be able to support additional soft or hard trauma plate | ||
| COMM 9.12 | Trauma plate pocket shall be located on the front of the vest | ||
| COMM 9.13 | Trauma plate pocket can be either internal or external | ||
| COMM 9.14 | Tramau plate pocket shall accommodate a minimum 5" x 7" trauma plate | ||
| COMM 9.15 | Sizes available for male (male sizes must be specifically designed for males) | ||
| COMM 9.16 | Must provide ability to separately measure and custom fit male officers | ||
| COMM 9.17 | Carrier must be fully adjustable with hook and loop type fastener for the side areas | ||
| COMM 9.18 | Carrier must be fully adjustable with hook and loop type fastener for the shoulder areas | ||
| COMM 9.19 | Shoulder straps must have additional padding or foam strapping for comfort | ||
| COMM 9.20 | Ballistic insert service life must be a minimum of five years | ||
| COMM 9.21 | Carrier must be easily cleaned and support being laundered | ||
| COMM 9.22 | Carrier service life must be equal to or greater than one year | ||
| COMM 9.23 | Body armor must be capable of being worn under the Air Force blue uniform shirt | ||
| COMM 9.24 | Must not ride up or shift while being worn | ||
| COMM 9.25 | Includes additional set of shoulder and side hook and loop fasteners | ||
| Common DoD Civilian & Military Items | Concealable Body Armor - Ballistic (Female) - CLIN #'s 0034 - 0043 | ||
| COMM 10.1 | Black in color | ||
| COMM 10.2 | Available in regular length in minimum sizes shall include small (S), medium (M), large, (L), extra-large (XL), and double extra-large (XXL) | ||
| COMM 10.3 | Available in long length in minimum sizes shall include small (S), medium (M), large, (L), extra-large (XL), and double extra-large (XXL) | ||
| COMM 10.4 | Moisture wicking and antimicrobial liner | ||
| COMM 10.5 | Ballistic inserts must be compliant with NIJ Std 0101.06 (www.nij.gov) | ||
| COMM 10.6 | Proposed body armor model must have been tested by the NIJ Compliance Testing Program | ||
| COMM 10.7 | Proposed body armor model must be listed on the NIJ Compliant Products List | ||
| COMM 10.8 | Ballistic inserts are rated for Type IIIA threat protection | ||
| COMM 10.9 | Ballistic inserts are capable of being removed from carrier | ||
| COMM 10.10 | Ballistic inserts must provide side protection | ||
| COMM 10.11 | Carrier must be able to support additional soft or hard trauma plate | ||
| COMM 10.12 | Trauma plate pocket shall be located on the front of the vest | ||
| COMM 10.13 | Trauma plate pocket can be either internal or external to the carrier | ||
| COMM 10.14 | Tramau plate pocket shall accommodate a minimum 5" x 7" trauma plate | ||
| COMM 10.15 | Sizes available for male (male sizes must be specifically designed for males) | ||
| COMM 10.16 | Must provide ability to separately measure and custom fit female officers | ||
| COMM 10.17 | Carrier must be fully adjustable with hook and loop type fastener for the side areas | ||
| COMM 10.18 | Carrier must be fully adjustable with hook and loop type fastener for the shoulder areas | ||
| COMM 10.19 | Shoulder straps must have additional padding or foam strapping for comfort | ||
| COMM 10.20 | Ballistic insert service life must be a minimum of five years | ||
| COMM 10.21 | Carrier must be easily cleaned and support being laundered | ||
| COMM 10.22 | Carrier service life must be equal to or greater than one year | ||
| COMM 10.23 | Body armor must be capable of being worn under the Air Force blue uniform shirt | ||
| COMM 10.24 | Must not ride up or shift while being worn | ||
| COMM 10.25 | Includes additional set of shoulder and side hook and loop fasteners | ||
| Vehicle Patrol Kit | Complete Vehicle Patrol Kit (quantities in parentheses) - CLIN # 0044 | ||
| VPK 1 | Reflective Traffic/Safety Vest (2) | ||
| VPK 2 | Expandable Cones with Lights (1 pack of 4) | ||
| VPK 3 | Traffic Wand (2) | ||
| VPK 4 | Disposable FLEX Cuffs (1 pack of 10) | ||
| VPK 5 | FLEX Cuff Cutter (1) | ||
| VPK 6 | Flashlight/Heavy Duty Rechargeable (1) | ||
| VPK 7 | Punch Hammer with Seat Belt Cutter (1) | ||
| VPK 8 | First Responder First Aid/Bloodborne Pathogen Kit (1) | ||
| VPK 9 | Container/Organizer (1) | ||
| Vehicle Patrol Kit | Reflective Traffice/Safety Vest (2) - CLIN # 0045 | ||
| VPK 1.1 | Blue in color with yellow reflective tape or fluorescent yellow in color with silver/grey reflective tape | ||
| VPK 1.2 | Complies with American National Standards Institute (ANSI) Class 2 safety vest requirements | ||
| VPK 1.3 | Easy-to-clean vinyl coated mesh fabric | ||
| VPK 1.4 | Hook and loop adjustable side straps | ||
| VPK 1.5 | Hook and loop adjustable closure | ||
| VPK 1.6 | One size fits all | ||
| VPK 1.7 | Reflective tape shall be a minimum width of 1-1/2" to maximum width of 2-1/2" | ||
| VPK 1.8 | Reflective tape shall have a minimum of two vertical reflective stripes and one horizontal reflective stripe on front and back | ||
| Vehicle Patrol Kit | Expandable Traffic Cones with Lights (1 pack of 4) - CLIN # 0046 | ||
| VPK 2.1 | Minimum of 4 per pack | ||
| VPK 2.2 | Bright orange in color | ||
| VPK 2.3 | Reflective cone collar | ||
| VPK 2.4 | Made of durable flexible mesh material | ||
| VPK 2.5 | Flexible spring allows cone to automatically self-deploy | ||
| VPK 2.6 | Expands to no smaller than 28" in height | ||
| VPK 2.7 | Base holds cone in place and grips the road for added stability | ||
| VPK 2.8 | Collapses flat for storage | ||
| VPK 2.9 | Internal LED with two settings, steady and flashing | ||
| VPK 2.10 | Shall use a standard non-propretary battery(s) that is/are readily available off the shelf (defined as size AAA, AA, C and D) | ||
| VPK 2.11 | Battery(s) is/are not required but, if included, must be shippable OCONUS | ||
| Vehicle Patrol Kit | FLEX Cuffs (1 pack of 10) - CLIN # 0047 | ||
| VPK 4.1 | Minimum of 10 per pack | ||
| VPK 4.2 | White in color | ||
| VPK 4.3 | Double loop | ||
| VPK 4.4 | Minimum of 33" long x 1/2" inches wide | ||
| VPK 4.5 | Rounded edges | ||
| VPK 4.6 | Minimum of 350lb. tensile strength | ||
| VPK 4.7 | Self-locking mechanism in the center of each end that will firmly holds wrist, arm and/or ankle | ||
| Vehicle Patrol Kit | Traffic Wand (2) - CLIN # 0048 | ||
| VPK 3.1 | Eight (8) LED lights | ||
| VPK 3.2 | Minimum of two flash patterns and steady burn | ||
| VPK 3.3 | Click on/off button | ||
| VPK 3.4 | Wand can be converted into white flashlight | ||
| VPK 3.5 | Highly visible both day and night | ||
| VPK 3.6 | Polycarbonate diffuser to enhance red light output | ||
| VPK 3.7 | Minimum length of 13" and maximum length of 20" | ||
| VPK 3.8 | Shall use a standard non-propretary battery(s) that is/are readily available off the shelf (defined as size AAA, AA, C and D) | ||
| VPK 3.9 | Battery(s) is/are not required but, if included, must be shippable OCONUS | ||
| Vehicle Patrol Kit | Flex Cuff Cutters (1) - CLIN # 0049 | ||
| VPK 5.1 | Compact | ||
| VPK 5.2 | Lightweight | ||
| VPK 5.3 | Steel construction | ||
| VPK 5.4 | Can be safetly used with one hand | ||
| VPK 5.5 | Specifically designed for removal of disposable retraints | ||
| Vehicle Patrol Kit | Rechargeable Heavy Duty Flashlight/Spotlight (1) - CLIN # 0050 | ||
| VPK 6.1 | Utilizes light-emitting diode (LED) light source | ||
| VPK 6.2 | Rechargeable | ||
| VPK 6.3 | Includes AC220V-110V/DC 12V charger | ||
| VPK 6.4 | Shock-absorbing internal battery module | ||
| VPK 6.5 | Minimum 200 lumens | ||
| VPK 6.6 | Provides minimum 2-hour run time on full charge | ||
| VPK 6.7 | Unbreakable ABS body | ||
| VPK 6.8 | Polycarbonate lens | ||
| VPK 6.9 | Thermoplastic rubber shroud | ||
| VPK 6.10 | Weatherproof | ||
| VPK 6.11 | Includes battery | ||
| VPK 6.12 | Battery must be able to be shipped OCONUS | ||
| Vehicle Patrol Kit | Punch Hammer with Seat Belt Cutter (1) - CLIN # 0051 | ||
| VPK 7.1 | One tool that combines the functions of a seatbelt cutter and window punch hammer | ||
| VPK 7.2 | Stainless steel blade that folds into handle for safety | ||
| VPK 7.3 | Window punch made of stainless steel | ||
| VPK 7.4 | Window punch is spring loaded | ||
| VPK 7.5 | Tool handle must be made of non-corroding material | ||
| VPK 7.6 | Operable in harsh environmental conditions (i.e., underwater, salt water, extreme cold and heat) | ||
| VPK 7.7 | Safe to carry in pocket | ||
| VPK 7.8 | Minimum length of 4" when closed and maximum length 7" when open | ||
| Vehicle Patrol Kit | First Responder First Aid/Blookborne Pathogen Kit (1) - CLIN # 0052 | ||
| VPK 8.1 | Nylon carry bag | ||
| VPK 8.2 | Carry bag no larger than 18" X 12" X 9" | ||
| VPK 8.3 | Carry bag must be primarily red in color | ||
| VPK 8.4 | 1 Protective Suit (size L) | ||
| VPK 8.5 | 1 safety glasses, polycarbonate construction, one size fits all, lightweight, provides protection to both front and side of eye | ||
| VPK 8.6 | 1 N95 surgical mask | ||
| VPK 8.7 | 1 CPR mask | ||
| VPK 8.8 | 1 Burn pad (4" x 4") | ||
| VPK 8.9 | 16 Band aids (1" x 3") | ||
| VPK 8.10 | 1 Abdominal Pad (5" x 9") | ||
| VPK 8.11 | 10 Gauze Pads (4" x 4") | ||
| VPK 8.12 | 1 Blood Stopper | ||
| VPK 8.13 | 1 Gauze Roll (3") | ||
| VPK 8.14 | 1 Gauze Roll (4") | ||
| VPK 8.15 | 1 Roll Waterproof tape (1") | ||
| VPK 8.16 | 1 Roll Waterproof tape (0.5") | ||
| VPK 8.17 | 1 Elastic Bandage (3") | ||
| VPK 8.18 | 2 Triangular Bandages, 40" x 40" x 56" | ||
| VPK 8.19 | 4 Eye Pads | ||
| VPK 8.20 | 10 Alcohol Wipes | ||
| VPK 8.21 | 10 Antimicrobial Wipes | ||
| VPK 8.22 | 1 Instrument Pack (shears, tweezers, bandage scissors, penlight) | ||
| VPK 8.23 | 2 Small Self-activated Cold Packs | ||
| VPK 8.24 | 1 Emergency Blanket made of durable insulating mylar material, retains/reflects back 90% of body heat, reusable, waterproof and windproof, 52" X 84" | ||
| VPK 8.25 | 2 Pairs Nitrile Gloves, size large, 13 mil thick | ||
| VPK 8.26 | 1 Eye Wash (4 oz) | ||
| VPK 8.27 | 1 Sharps Container, one quart in size, red in color with clear top | ||
| VPK 8.28 | 1 First Aid Book | ||
| Vehicle Patrol Kit | Container/Organizer (1) - CLIN # 0053 | ||
| VPK 9.1 | Size: No larger than 8.5"H x 40"W x 19"D | ||
| VPK 9.2 | Holds patrol kit items (items VPK 1.1 through VPK 8.28 above), all of which must fit in the container/organizer | ||
| VPK 9.3 | Contains movable dividers that will keep items separated for ease of access to items and use in emergency situations | ||
| VPK 9.4 | Durable construction that resists scratches | ||
| VPK 9.5 | Handles on sides for easy removal from trunk | ||
| VPK 9.6 | Ability to be locked | ||
| VPK 9.7 | Black in color | ||
| LE Crime Scene Kit | Complete LE Crime Scene Kit (quantities in parentheses) - CLIN # 0054 | ||
| CSK 1 | 100-count Paper Evidence Bags (1) | ||
| CSK 2 | 1,000 ft roll Police Crime Scene Tape (3) | ||
| CSK 3 | 30 ft roll Photo Tape with Evidence Scale (1) | ||
| CSK 4 | 100 ft Tape Measure (1) | ||
| CSK 5 | 3-piece minimum Crime Scene Reflective Chalk (1) | ||
| CSK 6 | 100-count Nitrile Gloves (1 box of each size: Sm, Med, Lg) | ||
| CSK 7 | Container/Organizer (1) | ||
| LE Crime Scene Kit | Paper Evidence Bags (1) - CLIN # 0055 | ||
| CSK 1.1 | Pre-printed with chain of custody/possession template | ||
| CSK 1.2 | Ability to close and reopen the Paper Evidence Bag utilizing the same fasteners | ||
| CSK 1.3 | Minimum height of 13" x 7" width | ||
| CSK 1.4 | Minimum of 100 per pack | ||
| LE Crime Scene Kit | Police/Crime Scene Tape (3 Rolls) - CLIN # 0056 | ||
| CSK 2.1 | 1,000 foot roll | ||
| CSK 2.2 | Three (3) rolls | ||
| CSK 2.3 | 3" wide x 3-mil thick | ||
| CSK 2.4 | Vinyl | ||
| CSK 2.5 | Easy-to-read black block letters with one of the following repeating phrases: "POLICE LINE DO NOT ENTER" or " POLICE LINE DO NOT CROSS" | ||
| CSK 2.6 | Distance between phrases no farther than 16" apart | ||
| CSK 2.7 | Each roll must come in its own dispenser box | ||
| LE Crime Scene Kit | 30 ft Photo Tape with Evidence Scale (1 Roll) - CLIN # 0057 | ||
| CSK 3.1 | Yellow or white in color | ||
| CSK 3.2 | 30-foot roll | ||
| CSK 3.3 | Minimum width of 1" maximum width of 1.5" | ||
| CSK 3.4 | Repeating, alternating black and white pattern throughout the scale every 12" for better visualization in distance photography | ||
| CSK 3.5 | Non-permanent adhesive backing | ||
| CSK 3.6 | Able to be applied and removed without damaging the evidence | ||
| CSK 3.7 | Units of measurement include centimeters on one edge and inches on the other | ||
| LE Crime Scene Kit | Tape Measure (1) - CLIN # 0058 | ||
| CSK 4.1 | 100 feet in length | ||
| CSK 4.2 | 1/2" width | ||
| CSK 4.3 | Open Reel | ||
| CSK 4.4 | Long-line fiberglass tape measure | ||
| CSK 4.5 | Easy-grip handles | ||
| CSK 4.6 | ABS case/frame | ||
| CSK 4.7 | Waterproof | ||
| CSK 4.8 | Rewind handle with rotating fingertip knob | ||
| CSK 4.9 | Positioning point | ||
| CSK 4.10 | Hook ring end is corrosion resistant | ||
| CSK 4.10 | Graduated in feet, inches and 1/8 inches | ||
| LE Crime Scene Kit | Crime Scene Reflective Chalk (Minimum of 3 Pieces) - CLIN # 0059 | ||
| CSK 5.1 | 1 pack with a minimum of 3 pieces per pack | ||
| CSK 5.2 | Minimum diameter of 1" maximum diameter of 2" | ||
| CSK 5.3 | Minimum length of 4" maximum length of 5" | ||
| CSK 5.4 | Creates highly reflective marks that are illuminated by photo flash or flashlight (appears extremely bright in flash photographs) | ||
| CSK 5.5 | Can be seen at night | ||
| LE Crime Scene Kit | Non-Irritating Nitrile Gloves (1-box of each size Sm, Med, Lg) - CLIN #'s 0060 - 0062 | ||
| CSK 6.1 | 5 mil-thick | ||
| CSK 6.2 | Beaded cuff | ||
| CSK 6.3 | Seamless | ||
| CSK 6.4 | Powder free | ||
| CSK 6.5 | Ambidextrous | ||
| CSK 6.6 | 100-count boxes | ||
| CSK 6.7 | Sizes: small, medium, and large | ||
| LE Crime Scene Kit | Container/Organizer (1) - CLIN # 0063 | ||
| CSK 7.1 | No larger than 8.5" H x 40" W x 19" D | ||
| CSK 7.2 | Holds Crime Scene Kit items (items CSK 1.1 through CSK 6.7 above), all of which must fit in the Container/Organizer | ||
| CSK 7.3 | Must contain movable dividers that will keep items separated for ease of access during crime scene investigations | ||
| CSK 7.4 | Durable construction that resists scratches | ||
| CSK 7.5 | Handles on sides for easy removal from trunk | ||
| CSK 7.6 | Ability to be locked | ||
| CSK 7.7 | Black in color | ||
| Surge Capability | Surge Capability | ||
| SC 1.1 | Offeror certification that at least 40% of the projected annual quantitiy of items per equipment category can be provided during the surge period with an on-time delivery of 30 days for CONUS for the first year of contract | ||
| SC 1.2 | Offeror certification that at least 75% of the projected annual quantitiy of items per equipment category can be provided during the surge period with an on-time delivery of 30 days for CONUS for years two (2) through five (5) of contract, and the six month option period if exercized. | ||
| SC 1.3 | Offeror certification that at least 40% of the projected annual quantitiy of items per equipment category can be provided during the surge period with an on-time delivery of 45 days for OCONUS for the first year of contract | ||
| SC 1.4 | Offeror certification that at least 75% of the projected annual quantitiy of items per equipment category can be provided during the surge period with an on-time delivery of 45 days for OCONUS for years two (2) through five (5) of contract, and the six month option period if exercized |
&"-,Bold"Enterprise Sourcing Group &K000000RFP LEE-ESG&"-,Regular" &K01+000
LAW ENFORCEMENT EQUIPMENT SPECIFICATIONS
&G
Page &P of &N
File details come from the government source that posted it. Updated .