Attachment_VII-48_CES_RAF_Lakenheath_Base_Standards.pdf

BASE STANDARDS

RAF LAKENHEATH & RAF FELTWELL Rev0

RAF LAKENHEATH & RAF FELTWELL

Table of Contents

Contents Introduction

Definition

Goal

Authority

Base Standard Amendment & Waiver

Supplementary Resources & Specialist Standards

Design: General

A10 Foundations

A20 Basement Construction

B10 Superstructure

B20 Enclosure

B30 Roofing

C10 Interior Construction

C20 Stairs

C30 Interior Finishes

D10 Conveying

D20 Plumbing

D30 HVAC

D40 Fire Protection

D50 Electrical

E10 Equipment

E20 Furnishings

F10 Special Construction

F20 Selective Building Demolition

G10 Site Preparation

G20 Site Improvement

G30 Site Mechanical Utilities

G40 Site Electrical Utilities

G90 Other Site Construction

APPENDICES: CONTENT

APPENDIX A - ABBREVIATIONS

APPENDIX B - FORMS – AMENDMENT & WAIVER

APPENDIX C - U.S. STANDARDS

APPENDIX D - U.K. STANDARDS

Introduction This document describes what the Standards are and what they do, how and where they will be used, how they will be made available and revision procedures.

Definition

Base Standards establish technical performance, design and aesthetic standards for the built fabric and technical installations to most facilities located at RAF Lakenheath and RAF Feltwell.

The Base Standards provide a design base for those parties within the management structure and design process including external consultants and contractors.

Specifications ensure sufficiently robust fittings, visual continuity and ease of maintenance, plus adequate services engineering and fire protection and security. Control over materials and design is also exercised by US Forces

Regulations such as ETL’s, and the UK Building Regulations. Some Regulations and other sources of information are provided with Appendices C and D, but is not exhaustive.

This Base Standard is supplemented by separate specialist standards and should be read in conjunction with such as and when appropriate – refer to Section 3.

The Base Standard; ‘Section 4 – Design’ has been set out to mirror ‘Uniformat II - Elemental Classification for

Building Specifications’ (NIST U.S. Department of Commerce). This being the USVF recognised method of cataloging and identification of materials and building systems on both sites.

‘Architectural’ items describe internal and external materials and colors including bollards, carpet laying, doors, fences, kitchen units, locks and ironmongery, paving, roads and parking, sanitary ware, signage, windows, blinds, planters, lamp post protectors, post and chains, benches, cycle shelters gazebos and waste bins to ensure external visual continuity. ‘Landscaping’ provides specific requirements on ground reinstatement and a plant list that should survive on the sandy soils. The ‘Civil/Structural’ section includes foul and surface water drainage and hazardous waste to protect our environment. ‘Pavements’ provide a visual link between spaces and enhance the visual character of the Base. ‘Environmental’ describes surface water disposal that complies with the Environmental

Agency and ‘Fire Protection’ specifies extinguishers, and hydrants that contribute to Fire Safety. ‘Engineering’ includes Building Management Systems, Fire Alarms and Electrical and Mechanical Installations to ensure a properly designed installation meets requirements and is compatible with existing installations. ‘Communications’ includes AFRTS and Premise Wire Architecture, describing specific requirements for these installations. AT/FP provides measures to minimise the threat and effects of terrorism.

Goal

The use of Base Standards by users, design teams, and contractors will ensure a consistency and continuity in the design and construction of facility interiors, exteriors and technical installations that contribute to ‘Installation

Excellence’. This will be achieved by increasing reference to the Standards at project briefing, design and construction stages. Facility managers will consult it when assembling a 332/Work Order.

During the preparation of the 1391 design instruction, 48 CES will research and contribute to a list of UK and US

Regulations, then agreed by the project team, to be taken into consideration in a design proposal. Design

Instructions will include the statement: ‘Designs must comply with the following documents’ which will include the current issue of Base Standards and the agreed list of Regulations. 48 CES Programmers will list all References, Regulations and the current issue of Base Standards referred to, in their Design Submittals. The Base Standards will be issued by USF or DIO as a Contract Document for design teams and contractors to use during the design and construction process.

Authority

Responsibility for Base Standards is delegated by the Wing Commander to the BCE.

Base Standard Amendment & Waiver

The base date for issue of these Base Standards is February 2018

Revised Base Standards may also be issued at such time that a major revision occurs.

Appendix B contains a form to be submitted to update/ amend or include a model/ part or item into the current Base

Standards.

This form is to be submitted with all relevant information to 48 CES Base Standard Working Group for review and comment. Using this form will be the only way a new model/ part or item will be included into the current Base

Standard document.

It is the responsibility of the submitter to provide a submission, which is concise and erudite with a full justification and supporting evidence.

Supplementary Resources & Specialist Standards

These Base Standards are supported by supplementary information resources and technical standards applicable to particular specialisms. As such, the base standards should be read in conjunction with the following supplementary standards as may be applicable:

Supplementary Standards:

Supplementary Standards – Housing.

Supplementary Standards – Medical Facilities.

Supplementary Standards – Storage Tanks.

Supplementary Standards – Performance Specification for Stand-by Generators.

Specialist Technical Standards:

Corrosion Prevention Guide.

Legionella Risk Assessment Guidance.

Supplementary Resources:

Project Manager Responsibilities – Project Handover Procedures.

Project Manager Responsibilities – Maintenance Manuals.

Contractor and A&E Responsibilities – Passes, Clearance, Certificates, Design & Technical Standards.

Contractor and A&E Responsibilities – Format Standards for As-Built Documents.

Contractor and A&E Responsibilities – Site Management.

Contractor and A&E Responsibilities – Construction Site Signage.

Tech-012 Project Handover Procedure (Appropriate to Project Manager’s & Contractors).

Engineering Technical Letters (ETL).

Construction Technical Letters (CTL).

Supplementary Memorandum:

Civil Engineering Control Systems Cybersecurity

Supplementary Guides:

Performance Specification Guide – Auto-Start Diesel Generator Sets.

Guidance – Double Block & Bleed (Double Valve Isolation & Proving Points).

Design: General

The following Base Standards follow recognised Uniformat II structure.

For quick reference refer to index at the back of these Standards.

MANDATORY or ADVISORY as noted.

Under ADVISORY, this document includes details of acceptable materials. Materials from other manufacturers that meet these requirements can be submitted with evidence of comparability for review and approval.

(MANDATORY)

Items selected are robust, likely to be readily available in future and simplifies storage of spares.

Asbestos

The contractor is responsible for conducting any necessary hazardous material surveys for all demolition and renovation projects with the potential to disturb hazardous materials (i.e. asbestos-containing material (ACM)), regardless of build date, prior to construction start date. The survey will be conducted by an appropriate HSE-licensed contractor.

Contact 48 CES/ CEIE Environmental Office (DSN 226-3990, Comm: 01638-523990) to determine the availability of any historical documentation to aide in project planning. The contractor shall not rely solely on existing historical documentation and is responsible for determining if work has potential to disturb ACM and requires survey.

The contractor shall ensure compliance with the following procedures:

1. *At least 5 working days prior to surveying, the contractor shall provide 48 CES/ CEIE with the following documentation for review:

Method Statements/Risk Assessments (RAMS).

Procedures for survey.

Fit Test Paperwork and equipment inspection/certification (inclusive of Decontamination Units, Hepa vacuums, masks and other related equipment).

Competency and certificated training paperwork.

Copies of medical clearance (HSE paperwork).

Copies of notification paperwork as per ALG Memo 06/12 if applicable.

HSE license to work, if applicable under licensed works.

2. 48 CES/CEIE will issue a permit to work for the survey work.

3. The contractor shall ensure all survey reports are provided to 48 CES/ CEIE.

4. If any abatement is required, *at least 5 working days prior to work, the contractor shall provide 48 CES/ CEIE with the following documentation for review:

Method Statements/ Risk Assessments (RAMS).

Procedures for removal and demolition.

Fit Test Paperwork and equipment inspection/certification (inclusive of Decontamination Units, Hepa.

vacuums, masks and other related equipment).

Competency and certificated training paperwork.

Copies of medical clearance (HSE paperwork).

Copies of notification paperwork as per ALG Memo 06/12 if applicable.

HSE license to work, if applicable under licensed works.

5. 48 CES/ CEIE will issue a permit to work for the abatement work.

6. The contractor shall ensure the following documentation is provided to 48 CES/CEIE following any abatement work:

Summary report.

Copies of daily site/ works diaries.

Copies of transfer notes and any other paperwork required to HSE Standards.

*Please note: In most cases 48 CES/ CEIE require a 5 working day turn around for issuing permits unless emergency works are required.

DESIGN INDEX

A1010 Standard Foundations

A1011 Wall Foundations

A1012 Column Foundation & Pile Caps

A1013 Perimeter Drainage & Insulation

A1020 Special Foundations

A1021 Pile Foundations

A1022 Grade Beams

A1023 Caissons

A1024 Underpinning

A1025 Dewatering

A1026 Raft Foundations

A1027 Pressure Injected Grouting

A1029 Other Special Conditions

A1030 Slab On Grade

A1031 Standard Slab on Grade

A1032 Structural Slab on Grade

A1033 Inclined Slab on Grade

A1034 Trenches, Pits & Bases

A1035 Under-Slab Drainage & Insulation

A2010 Basement Excavation

A2011 Excavation for Basements

A2012 Structure Back Fill & Compaction

A2013 Shoring

A2020 Basement Walls

A2021 Basement Wall Construction

A2022 Moisture Protection

A2023 Basement Wall Insulation

A2024 Interior Skin

B1010 Floor Construction

B1011 Suspended Basement Floors Construction

B1012 Upper Floors Construction

B1013 Balcony Floors Construction

B1014 Ramps

B1015 Exterior Stairs and Fire Escapes

B1016 Floor Raceway Systems

B1019 Other Floor Construction

B1020 Roof Construction

B1021 Flat Roof Construction

B1022 Flat Roof Construction

B1023 Canopies

B1029 Other Roof Systems

B2010 Exterior Walls

B2011 Exterior Wall Construction

B2012 Parapets

B2013 Exterior Louvres, Screens & Fencing

B2014 Exterior Sun Control Devices

B2015 Balcony Walls and Handrails

B2016 Exterior Soffits

B2020 Exterior Windows

B2021 Windows

B2022 Curtain Walls

B2023 Storefronts

B2030 - Exterior Doors

B2031 Glazed Doors & Entrances

B2032 Solid Exterior Doors

B2033 Revolving Doors

B2034 Overhead Doors

B2035 Other Doors & Entrance

B3010 Roof Coverings

B3011 Roof Finishes

B3012 Traffic Toppings & Pavement Membranes

B3013 Roof Insulation & Fill

B3014 Flashings & Trim

B3015 Roof Eaves & Soffits

B3016 Gutters & Downspouts

B3020 Roof Openings

B3021 Glazed Roof Openings

B3022 Roof Hatches

B3023 Gravity Roof Ventilators

C1010 Partitions

C1011 Fixed Partitions

C1012 Demountable Partitions

C1013 Retractable Partitions

C1014 Site Built Toilet Partitions

C1015 Site Built Compartments Cubicles

C1016 Interior Balustrades & Screens

C1017 Interior Windows & Storefronts

C1020 Interior Doors

C1021 Interior Doors

C1022 Interior Door Frames

C1023 Interior Door Hardware

C1024 Interior Door Wall Opening Element

C1025 Interior Door Sidelights & Transoms

C1026 Interior Hatches & Access Doors

C1027 Door Painting & Decoration

C1030 Fittings [Specialities]

C1031 Fabricated Toilet Partitions

C1032 Fabricated Compartments & Cubicles

C1033 Storage Shelving & Lockers

C1034 Ornamental Metals & Handrails

C1035 Identifying Devices

C1036 Closet Specialities

C1037 General Fittings & Misc. Metals

C2010 Stair Construction

C2011 Regular Stairs

C2012 Curved Stairs

C2013 Spiral Stairs

C2014 Stair Handrails & Balustrades

C2010 Stair Finishes

C2021 Stair, Tread & Landing Finishes

C2022 Stairs Soffit Finishes

C2023 Stair Handrails & Balustrades Finishes

C3010 Wall Finishes

C3011 Wall Finishes to Inside Exterior Walls

C3012 Wall Finishes to Inside Interior Walls

C3013 Column Finishes

C3020 Floor Finishes

C3021 Floor Toppings

C3021 Traffic Membranes

C3023 Hardeners & Sealers

C3024 Flooring

C3025 Carpeting

C3026 Bases, Curbs & Trim

C3027 Access Pedestal Flooring

C3031 Ceiling Finishes

C3032 Suspended Ceilings

C3033 Other Ceilings

D1010 Elevators & Lifts

D1011 Passenger Elevators

D1012 Freight Elevators

D1013 Lifts

D1020 Escalators & Moving Walks

D1021 Escalators

D1022 Moving Walks

D1090 Other Conveying Systems

D1091 Dumbwaiters

D1092 Pneumatic Tube Systems

D1093 Hoist & Cranes

D1094 Conveyors

D1095 Chutes

D1096 Turntables

D1097 Baggage Handling & Loading System

D1098 Transportation System

D2010 Plumbing Fixtures

D2011 Water Closets

D2012 Urinals

D2013 Lavatories

D2014 Sinks

D2015 Bathtubs

D2016 Wash Fountains

D2017 Showers

D2018 Drinking Fountains & Coolers

D2019 Bidets & Other Plumbing Fixture

D2020 Domestic Water Distribution

D2021 Cold Water Services

D2022 Hot Water Services

D2023 Domestic Water Supply Equipment

D2030 Sanitary Waste

D2031 Waste Piping

D2032 Vent Piping

D2033 Floor Drains

D2034 Sanitary Waste Equipment

D2035 Pipe Insulation

D2040 Rain Water Drainage

D2041 Pipe & Fittings

D2042 Roof Drains

D2043 Rainwater Drainage Equipment

D2044 Pipe Insulation

D2090 Other Plumbing Systems

D2091 Gas Distribution

D2092 Acid Waste Systems

D2093 Interceptors

D2094 Pool Piping & Equipment

D2095 Decorative Fountain Piping Devices

D2096 Other Piping System

D3010 Energy Supply

D3011 Oil Supply System

D3012 Gas Supply System

D3013 Coal Supply System

D3014 Steam Supply System

D3015 Hot Water Supply System

D3016 Solar Energy Supply System

D3017 Wind Energy System

D3020 Heat Generating Systems

D3021 Boilers

D3022 Boiler Room Piping & Specialities

D3023 Auxiliary Equipment

D3024 Insulation

D3030 Cooling Generating Systems

D3031 Chilled Water Systems

D3032 Direct Expansion Systems

D3040 Distribution Systems

D3041 Air Distribution System

D3042 Exhaust Ventilation System

D3043 Steam Distribution System

D3044 Hot Water Distribution System

D3045 Chilled Water Distribution

D3046 Change-over Distribution System

D3047 Glycol Distribution System

D3050 Terminal & Package Units

D3051 Terminal Self-Contained Units

D3052 Package Units

D3060 Controls & Instrumentation

D3061 Heating Generating Systems

D3062 Cooling Generation Systems

D3063 Heating/ Cooling Air Handling Units

D3064 Exhaust & Ventilating Systems

D3065 Hoods & Exhaust Systems

D3066 Terminal Devices

D3067 Energy Monitoring & Control

D3068 Building Automation Systems

D3069 Other Controls & Instrumentation

D3070 Systems Testing & Balancing

D3071 Piping System Testing & Balancing

D3072 Air Systems Testing & Balancing

D3073 HVAC Commissioning

D3074 Other Systems Testing & Balancing

D3090 Other HVAC Systems & Equipment

D3091 Special Cooling Systems & Devices

D3092 Special Humidity Control

D3093 Dust & Fume Control

D3094 Air Curtains

D3095 Air Purifiers

D3096 Paint Spray Booth Ventilation

D3097 General Construction Items (HVAC)

D4010 Sprinklers

D4011 Sprinkler Water Supply

D4012 Sprinkler Pumping Equipment

D4013 Dry Sprinkler System

D4020 Standpipes

D4021 Standpipe Water Supply

D4022 Pumping Equipment

D4023 Standpipe Equipment

D4024 Fire Hose Equipment

D4030 Fire Protection Specialities

D4031 Fire Extinguishers

D4032 Fire Extinguisher Cabinets

D4090 Other Fire Protection Systems

D4091 Carbon Dioxide Systems

D4092 Foam Generating Equipment

D4093 Clean Agent Systems

D4094 Dry Chemical System

D4095 Hood & Duct Fire Protection

D5010 Electrical Service & Distribution

D5011 High Tension Service & Dist

D5012 Low Tension Service & Dist

D5020 Lighting & Branch Wiring

D5021 Branch Wiring Devices

D5022 Lighting Equipment

D5030 Communications & Security

D5031 Public Address & Music Systems

D5032 Intercommunication & Paging System

D5033 Telephone System

D5034 Call Systems

D5035 Television System

D5036 Clock & Program Systems

D5037 Fire Alarm Systems

D5038 Security & Detection Systems

D5039 Local Area Network

D5090 Other Electrical System

D5091 Grounding Systems

D5092 Emergency Light & Power Systems

D5093 Floor Raceway System

D5094 Other Special Systems & Devices

D5095 General Construction Items (Elect)

E1010 Commercial Equipment

E1011 Security & Vault Equipment

E1012 Teller & Service Equipment

E1013 Registration Equipment

E1014 Checkroom Equipment

E1015 Mercantile Equipment

E1016 Laundry & Dry Cleaning Equipment

E1017 Vending Equipment

E1018 Office Equipment

E1020 Institutional Equipment

E1021 Ecclesiastical Equipment

E1022 Library Equipment

E1023 Theatre & Stage Equipment

E1024 Instrumental Equipment

E1025 Audio-Visual Equipment

E1026 Detention Equipment

E1027 Laboratory Equipment

E1028 Medical Equipment

E1029 Other Vehicular Equipment

E1030 Vehicular Equipment

E1031 Vehicular Service Equipment

E1032 Parking Control Equipment

E1033 Loading Dock Equipment

E1039 Other Vehicular Equipment

E1090 Other Equipment

E1091 Maintenance Equipment

E1092 Solid Waste Handling Equipment

E1093 Food Service Equipment

E1094 Residential Equipment

E1095 Unit Kitchens

E1097 Window Washing Equipment

E1099 Other Equipment

E2010 Fixed Furnishings

E2011 Fixed Artwork

E2012 Fixed Casework

E2013 Blinds & Other Window Treatment

E2014 Fixed Floor Grilles & Mats

E2015 Fixed Multiple Seating

E2016 Fixed Interior Landscape

E2020 Movable Furnishings

E2021 Movable Artwork

E2022 Furniture & Accessories

E2023 Movable Rugs & Mats

E2024 Movable Interior Landscape

F1010 Special Construction

F1011 Air Supported Structures

F1012 Pre-Engineered Structures

F1013 Other Special Structures

F1020 Integrated Construction

F1021 Integrated Assemblies

F1022 Special Purpose Rooms

F1023 Other Integrated Structures

F1030 Special Construction Systems

F1031 Sound, Vibration & Seismic Const

F1032 Radiation Protection

F1033 Special Security Systems

F1034 Vaults

F1035 Other Special Construction Systems

F1040 Special Facilities

F1041 Aquatic Facilities

F1042 Ice Rinks

F1043 Site Constructed Incinerators

F1044 Kennels & Animal Shelters

F1045 Liquid & Gas Storage Tanks

F1049 Other Special Facilities

F1050 Special Controls & Instrumentation

F1051 Recording Instrumentation

F1052 Building Automation System

F1059 Other Special Controls & Instrumentation

F2010 Building Elements Demolition

F2011 Building Interior Demolition

F2012 Building Exterior Demolition

F2020 Hazardous Components Abatement

F2011 Removal of Hazardous Components

F2012 Encapsulation of Hazardous Components

G1010 Site Clearing

G1011 Clearing & Grubbing

G1012 Tree Removal & Thinning

G1020 Site Demolition & Relocation

G1021 Building Demolition

G1022 Demolition of Site Components

G1023 Relocation of Building & Utilities

G1024 Utilities Relocation

G1030 Site Earthwork

G1031 Site Grading Excavation

G1032 Borrow Fill

G1033 Soil Stabilization & Treatment

G1034 Site Dewatering

G1035 Site Shoring

G1036 Embankments

G1037 Erosion Control

G1040 Hazardous Waste Remediation

G1041 Removal of Contaminated Soil

G1042 Soil Restoration & Treatment

G2010 Roadways

G2011 Base & Sub-Bases

G2012 Paving & Surfacing

G2013 Curbs, Gutters & Drains

G2014 Guardrails & Barriers

G2015 Painted Lines

G2016 Markings & Signage

G2017 Vehicular Bridges

G2020 Parking Lots

G2021 Base & Sub-Bases

G2022 Paving & Surfacing

G2023 Curbs, Rails & Barriers

G2024 Parking Booths & Equipment

G2025 Markings & Signage

G2030 Pedestrian Paving

G2031 Paving & Surfacing

G2032 Edging

G2033 Exterior Steps

G2034 Pedestrian Bridges

G2040 Site Development

G2041 Fences & Gates

G2042 Retaining Walls

G2043 Terrace & Perimeter Walls

G2044 Signage

G2045 Site Furnishings

G2046 Fountains, Pools & Watercourses

G2047 Playing Fields

G2048 Flagpoles

G2049 Miscellaneous Structures

G2050 Landscaping

G2051 Fine Grading & Soil Preparation

G2052 Erosion Control Measures

G2053 Top Soil & Planting Beds

G2054 Seeding & Sodding

G2055 Planting

G2056 Planters

G2057 Irrigation Systems

G2059 Other Landscape Features

G3010 Water Supply

G3011 Portable Water Distribution & Storage

G3012 Non Portable Water Distribution & Storage

G3013 Well Systems

G3014 Fire Protection Distribution & Storage

G3015 Pumping Stations

G3016 Package Water Treatment Plants

G3020 Sanitary Sewer

G3021 Piping

G3022 Manholes & Cleanouts

G3023 Septic Disposal Systems

G3024 Lift Stations

G3025 Packaged Water Waste Treatment Plants

G3026 Septic Tanks

G3027 Drain Fields

G3030 Storm Sewer

G3031 Piping

G3032 Manholes

G3033 Headwalls & Catch Basins

G3034 Lift Stations

G3035 Retention Ponds

G3036 Ditches & Culverts

G3040 Heating Distribution

G3041 Steam Supply

G3042 Condensate Return

G3043 Hot Water Supply System

G3044 Pumping Stations

G3050 Cooling Distribution

G3051 Chilled Water Piping

G3052 Wells for Cooling/Heating

G3053 Pumping Stations

G3054 Cooling Towers on Site

G3060 Fuel Distribution

G3061 Fuel Piping

G3062 Fuel Equipment

G3063 Fuel Storage Tanks

G3064 Fuel Dispensing Stations

G3090 Other Site Mechanical Utilities

G3091 Industrial Waste Systems

G3092 POL (Petroleum Oil & Lubricants) Distribution Systems

G4010 Electrical Distribution

G4011 Sub-stations

G4012 Overhead Power Distribution

G4013 Underground Power Distribution

G4020 Site Lighting

G4021 Fixtures & Transformers

G4022 Poles

G4023 Wiring Conduits & Duct-banks

G4024 Site Lighting Controls

G4030 Site Communication & Security

G4031 Site Communications Systems

G4032 Site Security & Alarm Systems

G4090 Other Site Electrical Utilities

G4091 Cathodic Protection

G4092 Site Emergency Power Generation

G9010 Service & Pedestrian Tunnels

G9011 Service Tunnels

G9012 Trench Boxes

G9011 Pedestrian Tunnels

G9090 Other Site Systems

G9091 Snow Melting Systems

A – Sub-Structure

A10 Foundations

A1010 Standard Foundations

A1011 Wall Foundations

No site specific content.

A1012 Column Foundation & Pile Caps

No site specific content.

A1013 Perimeter Drainage & Insulation

No site specific content.

A1020 Special Foundations

A1021 Pile Foundations

No site specific content.

A1022 Grade Beams

No site specific content.

A1023 Caissons

No site specific content.

A1024 Underpinning

No site specific content.

A1025 Dewatering

No site specific content.

A1026 Raft Foundations

No site specific content.

A1027 Pressure Injected Grouting

No site specific content.

A1029 Other Special Conditions

A1030 Slab On Grade

A1031 Standard Slab on Grade

No site specific content.

A1032 Structural Slab on Grade

No site specific content.

A1033 Inclined Slab on Grade

No site specific content.

A1034 Trenches, Pits & Bases

A1035 Under-Slab Drainage & Insulation

A20 Basement Construction

A2010 Basement Excavation

A2011 Excavation for Basements

No site specific content.

A2012 Structure Back Fill & Compaction

No site specific content.

A2013 Shoring

A2020 Basement Walls

A2021 Basement Wall Construction

No site specific content.

A2022 Moisture Protection

No site specific content.

A2023 Basement Wall Insulation

No site specific content.

A2024 Interior Skin

B – Shell

B10 Superstructure

B1010 Floor Construction

B1011 Suspended Basement Floors Construction

No site specific content.

B1012 Upper Floors Construction

No site specific content.

B1013 Balcony Floors Construction

No site specific content.

B1014 Ramps

No site specific content.

Shall meet minimum requirements of DDA & ADA, whichever is most onerous.

B1015 Exterior Stairs and Fire Escapes

No site specific content.

B1016 Floor Raceway Systems

No site specific content.

B1019 Other Floor Construction

B1020 Roof Construction

B1021 Flat Roof Construction

No site specific content.

B1022 Flat Roof Construction

No site specific content.

Note: Flat roof construction shall be avoided where practicable. In circumstances where flat roof construction is unavoidable the performance shall be a minimum 20 years design life.

B1023 Canopies

No site specific content.

B1029 Other Roof Systems

B20 Enclosure

B2010 Exterior Walls

B2011 Exterior Wall Construction

Materials:

B2011.1

Application: Exterior skin of cavity/brick walling – RAF Lakenheath only.

Manufacturer Blockleys Brick Ltd.

Product ref.: Golden brown mixture.

Tested to: BS 3921 (1985).

Color: 'Wrekin Briar'' texture, buff.

Material: Natural clay.

Notes: Mortar, natural bond, stretcher pointing, struck, weathered.

B2011.2

Application: Exterior skin of cavity/brick walling - Special brick used at RAF Feltwell.

Manufacturer Hanson UK

Product ref.: Butterley range of Kempston bricks

Tested to: BS 3921 (1985)

Color: Multi rustic Burghley Red

Material: Natural Clay

Notes: Durability - frost resistant strength - 28n/mm2 9av. 15 - 18). Mortar – natural. Bond – stretcher. Pointing - struck, weathered.

B2011.3

Application: Exterior skin of cavity/brick walling

Manufacturer : Ibstock Building Products Ltd.

Product ref.: Victorian buff west brick

Tested to: BS 3921 (1985)

Color: Smooth face Light Buff

Material: Natural Clay

Notes: Applicable to RAF Lakenheath hospital extension, Building 935. Bands contrast with panels of B2011.1

B2011.4

Application: Sealed Wall Panels

Manufacturer European Profiles Ltd

Product Ref.: "Stratabord"

Tested to: BS 5368 1-4, for weather tightness; BS 6375 (1)

Color: White

Material: Polyester powder coated Aluminium faced panel with expanded polystyrene infill

Notes: Thermally broken sub-frame integral to panel

B2011.5

Application: Walls

Manufacturer: Kingspan Ltd.

Product Ref.: KS 100 RW Metal sheet profile.

Tested to: BS 3921 (1985).

Color: BS 08B17, Cream (Vellum).

Material: Foam fillers used in panel joints.

Notes: N/a.

B2011.6

Application: External wall rendering; Exposed steel columns; metal balustrades.

Manufacturer: ICI Dulux Akzo Nobel; Crown Berger

Product Ref: Weathershield

Tested to: BS 4800

Color: BS 08B29

Material: “Smooth masonry” – water based acrylic resin paint. “All seasons” – solvent based paint

Notes: Prevents rain penetration; Life Span - 15 years without UV light degradation.

B2011.7

Application: Walls [See also ceiling soffits].

Manufacturer: Marley Eternit Ltd.

Product Ref: ‘Glasal’.

Tested to: N/a.

Color: White.

Material: Fully compressed light weight, mineral fibre cement

Notes: Size - Sub-frame bolted to structure. Concealed fixings to hangars;

Eternit ‘multiclad’ is a cheaper, semi- compressed fibre with painted finish. Rainscreen option available; Use - Suitable for external surfaces.

B2012 Parapets

B2013 Exterior Louvres, Screens & Fencing

B2013.1

Application: Air handling - ventilate roof spaces.

Manufacturer: Not indicated.

Product Ref: Not indicated.

Tested to: Powder coated to BS 6497.

Color: BS 08B29 Dark brown mat.

Material: Extruded aluminium frame & fins.

Notes: See fire model; smoke ventilation during a fire and natural ventilation.

B2014 Exterior Sun Control Devices

B2015 Balcony Walls and Handrails

B2016 Exterior Soffits

Materials

B2016.1

Application: Soffits [See also Walls].

Manufacturer: Marley Eternit Ltd.

Product Ref: ‘Glasal’.

Tested to: N/a.

Color: White.

Material: Fully compressed light weight, mineral fibre cement

Notes: Size - Sub-frame bolted to structure. Concealed fixings to hangars;

Eternit ‘multiclad’ is a cheaper, semi- compressed fibre with painted finish. Rainscreen option available; Use - Suitable for external surfaces.

B2020 Exterior Windows

B2021 Windows

Materials

B2021.1

Application: Outer glazing panel; doors & windows; solar control.

Manufacturer: Pilkington (UK) Ltd.

Product Ref.: ‘Insulight’ Series "Energikare’’.

Tested to: BS 5713.

Color: Clear or bronze tinting.

Material: Double glazing. Heat toughened, laminated glass.

Notes: Energy Efficient; Glass thickness depends on type: e.g. ‘Insulight Phon’ inner pane minimum 7.5mm thickness; Insulight Sun Glass for solar control.

B2021.2

Application: Inner glazing panel for doors & windows.

Manufacturer: Pilkington (UK) Ltd.

Product Ref: ‘K’ type (Kappa float) glass "Energikare". Energy Efficient.

Tested to: BS 5713; BS 1615

Color: Georgian bronze tint.

Material: Double glazing Heat toughened, laminated glass Microscopic metal surface coating

Notes: ‘Insulight Phon’ glass is 6.4mm glass with 12mm cavity vacuum. Inner pane minimum

7.5mm thickness; Low emission and heat loss.

B2021.3

Application: Wall cladding system in modules.

Manufacturer: Kawneer (UK) Ltd.

Product Ref: 500 series Casement.

Tested to: BS 1474/ 3987/ 6496 [Materials].

Color: BS 08B29 outside; white inside frame.

Material: Frame in aluminium extrusions.

Notes: Fabricator; Broadland Windows. Double glazing; 72mm wide mullion; 160mm with two opening frames; Thermal break to frames; Fixings screwed to masonry.

B2021.4

Application: Punch or Ribbon Run Windows

Manufacturer: Technal (UK) Ltd

Product Ref: Six models apply, e.g. FG, FS, FT, VWT

Tested to: BS 6375 (Part 1) [Weathertight].

Color: BS 08B29 outside; white i