Attch 10 - Wage Determination - Mechanical IDIQ.docx

FA4887-11-R-0004 Attachment 4 Luke AFB Mechanical IDIQ

General Decision Number: AZ100001 05/13/2011 AZ1 Superseded General Decision Number: AZ20080001 State: Arizona Construction Type: Building Counties: Coconino, Maricopa, Mohave, Pima, Pinal and Yuma Counties in Arizona.

BUILDING CONSTRUCTION PROJECTS (does not include residential construction consisting of single family homes and apartments up to and including 4 stories) Modification Number Publication Date 0 03/12/2010 1 06/04/2010 2 07/02/2010 3 07/09/2010 4 07/23/2010 5 08/06/2010 6 08/27/2010 7 09/10/2010 8 10/15/2010 9 11/05/2010 10 11/19/2010 11 12/03/2010 12 01/21/2011 13 02/04/2011 14 04/01/2011 15 04/08/2011 16 04/15/2011 17 05/13/2011

BRAZ0003-003 11/23/2009

COCONINO, MARICOPA, MOHAVE, PINAL (Area West and North of the San Francisco River to the Gila River), & YUMA COUNTIES

BRAZ0003-008 11/23/2009

PIMA AND PINAL (Area East and South of the San Francisco River to the Gila River) COUNTIES

CARP0408-001 07/01/2009

CARP1327-001 01/01/2010

ELEC0570-003 12/01/2010

PIMA, PINAL (Southern Part), AND YUMA COUNTIES

Zone Definitions (b) ZONE PAY -Workmen employed in Zones B and C shall be paid Zone Pay as follows:

Zone B............an additional $ 1.25 per hour Zone C............an additional $ 3.75 per hour

SECTION 3.05 ZONES

(a) Zones shall be created in Tucson, Arizona, the headquarters of the Union. Zones may be established in other localities by mutual consent of the parties hereto (Section 1.03). Zones and the applicable rates of pay shall be the same for all Employers coming under the terms of this Agreement. In Tucson, Zone A shall be the area within a twenty-nine (29) mile radius from a basing point at the City Hall. Zone B shall be the area from the outer limits of the twenty-nine (29) mile radius, extending out another seventeen (17) miles (a 46 mile radius total). Zone C shall be the area from the forty-six (46) mile radius, extending to the outside limits of the Local Union's jurisdiction. If any owner's contiguous property falls within more than one Zone, it shall all be considered to be within the closer Zone.

ELEC0640-005 06/21/2010

COCONINO, MARICOPA, MOHAVE, and PINAL (Area North and West of the boundary line beginning at a point where Papago Indian Reservation Road No. 15 crosses the Pima-Pinal County line, then Northeasterly on Road No. 15 to the intersection with Highway FAS-267, extending North on FAS-267 to the intersection with Florence Canal, North & East on Florence Canal to the intersection of the line "Second Guide Meridian East" then North to the Maricopa-Pinal County Lines) COUNTIES

ENGI0428-003 06/01/2010

Rates Fringes Power Equipment Operator

IRON0075-002 08/01/2009

Rates Fringes

IRONWORKER, STRUCTURAL

Zone 1:..................... $ 26.52 17.59 Zone 1: 0 to 50 miles from City Hall in Phoenix or Tucson Zone 2: 050 to 100 miles - Add $4.00 Zone 3: 100 to 150 miles - Add $5.00 Zone 4: 150 miles & over - Add $6.50

LABO0383-005 06/01/2009

PAIN0086-003 04/01/2010

* PAIN0086-005 07/01/2010

PLUM0469-002 07/01/2010

ZONE A: COCONINO, MARICOPA, MOHAVE & YUMA COUNTIES

ZONE B: PIMA AND PINAL COUNTIES

Rates Fringes

PLUMBER/PIPEFITTER

SFAZ0669-001 04/01/2011

SHEE0359-002 01/01/2011

PIMA and PINAL (South of the 33rd Parallel) COUNTIES Rates Fringes Sheet Metal Worker (Including HVAC) Zone 1...................... $ 28.75 13.00+3%

SHEE0359-003 01/01/2011

COCONINO, MARICOPA, MOHAVE, PINAL (North of the 33rd Parallel), and YUMA COUNTIES

SUAZ2004-001 01/14/2004

Laborers:

Power Equipment Operator

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION