CASS_Attachment_8_3052_JBA_400Hz_SingleJacket_Sept_2016.pdf

It’s all about connections

J&B AVIATION is part of ITW GSE

– the world’s leading supplier of Ground Support Equipment

J&B Aviation 400 Hz Single Jacket Cable Assemblies

Modular 400 Hz Cable Assemblies

J&B Aviation has built its reputation on quality cables. The J&B Aviation Modular 400 Hz Cable Assemblies provide the best design with the maximum number of options. Our streamlined connector provides greater versatility for the aircraft of today and for future aircraft requirements.

Features include:

• ETL listed to UL standard - J&B Aviation cables are ETL certified. This is especially critical for airport requirements.

• Patented high visibility replacement contact section (nose) – allows for in-field replacement in 3-5 minutes.

Worn and damaged noses account for over 75% of all cable failures.

• Plug-in switch modules – allows for in-field replacement in 3-5 minutes with no wiring. Gold plated contacts ensure superior electrical connections in the most adverse conditions.

• Cost effective – modular design, superior construction and durability reduce life cycle costs and increases productivity.

• High performance – reduces phase unbalance by 97%, voltage drop by 35% over banded cable.

• Thermgard® Replacement contact section – provides added protection from worn or loose contact by sensing heat rise (hot plug) which can result in fire.

• Most durable high performance cable in the market according to independent studies

Power Conductors 6 EACH, AWG #4

Neutral Conductor 1 each, AWG #1

Control Conductors 6 x 3, AWG #18

Stranding Class M, Extra Flexible

Voltage Rating 600 VAC

Current Rating 260 Amperes

Cold Bend Rating -50° C

Voltage Drop 2.80 Volts*

Voltage Unbalance > 0.20 VOLTS*

Max. Continuous Conductor Temp. +90° C

Diameter 1.65 inches

Bending Radius 10 inches

Weight per foot 2.1 lbs.

*at 90kVA, 0.8 power factor on 60-ft. cable.

Cross Section Shown

It’s all about connections

400 Hz Single Jacket Cable Assemblies J&B Aviation

Cable Protection Cable Scuff Jacket – JB7501 The J&B Aviation Cable Scuff Jacket JB7501 / JB7502 allows easy handling of the cable on the ramp and in hangar bays by allowing it to easily slide across the ground surface. The scuff jackets also offer protection against harsh environments and are secured with Cold Shrink. Available in high visibility orange (JB7501 – shown) or gray (JB7502)

Cable Head Dust Cap – JB400CY The J&B Aviation 400 Hz Cable Head Dust Cap ensures that debris, water and live connectors do not pose a hazard to personnel or equipment. The dust cap fits securely onto any replaceable contact section, as shown below.

S e p te m b e r 2

TYPICAL GROUND POWER CABLE ASSEMBLY PART NUMBERS

TG 95 16 60

Nose Type Connector Type Cable Type Length: In Feet

NOSE TYPES

JB or JBX Standard replacement contact section (Part # JB7174 or JB7174X)

TG or TGX Thermgard (green) Replacement contact section (Part # JB7178 or JB7178X)

CONNECTOR TYPES

82 400 Hz Ground Power Plug, not prewired for switches, Blue Nose

88 400 Hz Ground Power Plug, not prewired for switches, Yellow Nose

86 400 Hz Ground Power Plug with ON/OFF modular switch (2nd module optional)

94 400 Hz Ground Power Plug with OFF ONLY modular switch (NO or NC)

95 400 Hz Ground Power Plug with ON/OFF and UP/DOWN modular switches

CABLE TYPES

10 Single Jacketed 180 Amp Balanced Center Neutral

16 Single Jacketed 260 Amp Balanced Center Neutral

17 Single Jacketed 260 Amp Balanced Center Neutral, Remote Voltage Sensing

ITW GSE Americas 11001 US Highway 41 North

Palmetto, FL 34221 U.S.A.

Toll Free: 1-800-621-0074 Phone: 1-941-721-1018

Fax: 1-941-721-1089 Email: jandbsales@itwgse.us

Web: www.us.itwgse.com