01 21 53
29 KB Posted
- Solicitation number
- FA3016-17-R-0025
About this file
SOW Appendix A, Specifications, FA3016-17-R-0025
Text of this file
DIVISION 1 – GENERAL REQUIREMENTS
SECTION 01 21 53
DUST PROTECTION
1. DESCRIPTION OF WORK: This specification covers the protection of work areas by the furnishing and installation of a temporary framework covered by polyethylene sheeting around the area where work is being performed or around the area that requires protection.
2. PRODUCTS:
2.1 Framework shall be of sturdy wood or metal composition.
2.2 Polyethylene Film shall comply with ASTM D 2103, shall have a minimum density of 0.910, and impact strength greater than 70.
2.3 Adhesive Tape for sealing seams and edges shall meet the polyethylene manufacturer's recommendations.
2.4 Sealing compound shall comply with recommended practices for use of latex compounds as prescribed by ASTM C 790.
3. EXECUTION:
3.1 Installation: Dust protection enclosures shall be installed according to the manufacturer's recommendations.
3.2 Repairs: Any accidental penetrations of the enclosures shall be repaired swiftly and adequately to prevent dust intrusion.
END OF SECTION
01 21 53 - 1
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .