Attachment 6 - Construction Document Drawings.pdf
PDF 249 KB Posted
- Attached to
- Child Development Center Playgrounds
- Solicitation number
- FA301027Q0002
About this file
This document is Attachment E to a federal construction solicitation, specifying the required Construction Document (CD) Drawings that contractors must submit for a construction project. The attachment establishes comprehensive drawing requirements across multiple disciplines including General Sheets, Civil Engineering, Landscape Architecture, Architecture, Structural, Mechanical, and Electrical work. General Sheets must include cover sheet, index sheet, overall site plan, existing conditions plan, contractor staging areas, construction limits, survey control with coordinates and elevations, property lines with bearings and easements, proposed construction outlines, demolition plans as appropriate, HazMat plans, code analysis and Architectural Barriers Act Accessibility Standards (ABAAS) compliance plans, universal design and accessibility plans, fire safety plans, and fire egress plans.
Civil Engineering Sheets require fully detailed site plans, road and parking plans with plan and profile sheets, typical cross-sections with centerline stations and curve data, accessible parking and routes clearly delineated, storm water collection and treatment plans, and utilities plans showing water, wastewater, and other systems with layout and profile sheets. Landscape Architecture Sheets must include demolition plans, site plans with discipline-specific notes and symbols, site layout plans with coordinates and dimensioned accessible routes, grading plans with proposed contours at maximum 2-foot intervals, planting and irrigation plans, site details addressing erosion control and accessibility, and sign plans including traffic signs and interpretive signage. Architecture Sheets require finalized general sheets, demolition drawings, floor plans with space delineation and dimensions, roof plans with drainage indicators, building sections with floor-to-floor dimensions, building elevations, interior elevations, reflected ceiling plans with lighting fixture layouts, construction details, room finish schedules, and hardware schedules. Structural Sheets must include applicable codes and design loads per International Building Code Section 1603, fully dimensioned foundation plans, floor and roof framing plans with column gridlines and beam elevations, foundation details, framing connection details, and equipment schedules. Mechanical Sheets require site mechanical plans, floor plans for HVAC and plumbing with cross-references, equipment schedules, plumbing fixture connection schedules, and control schematics. Electrical Sheets must include floor plans, site electrical plans showing routing and transformers, detail drawings, branch circuiting for all devices, equipment disconnect locations, panel board and light fixture schedules, fire alarm matrices, single-line diagrams for power distribution, and security system plans.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment E – Construction Document Drawings
Construction Documents (CD) Drawings shall consist of the following. (Additional types of information, processes and considerations may be required for certain projects.)
Construction Document Drawings
• Cover sheet
• Second sheet border
• Index sheet (may be included on cover sheet)
• General Sheets
• Overall site plan showing total project
• Existing conditions (as base)
• Contractor staging areas (construction storage, field office, construction camp) with adequate space or sequencing needs
• Construction limits
• Construction access
• Survey control, monuments and benchmarks with coordinates and elevations
• Property lines with bearings, easements, utility corridors and setbacks
• Proposed construction (i.e. outline of new structures, utilities, roadways, walks)
• Unique construction requirements
• Existing conditions plan
• Existing contours and spot elevations
• Existing buildings and other structures
• Existing site features: roads, parking, structures, walks, steps, walls, etc.
• Existing utilities, above and below ground, shown to scale (inlets, lift stations, propane tanks, septic tanks, culverts, etc.) include spot elevations for each, invert elevations for all below ground structures. Use appropriate symbols for small utility items (i.e.
lighting, transformers, pull boxes, manholes, inlets, etc.)
• Existing land features and vegetation
• Overall symbol legend and abbreviations list, if applicable.
• Demolition plan, as appropriate. Demolition may be shown on discipline sheets if more appropriate.
• HazMat plans, as appropriate.
• Code Analysis and Architectural Barriers Act Accessibility Standards
(ABAAS) Compliance Plans
• Universal Design and Accessibility Site Plan
• Universal Design and Accessibility Building Plan
• Fire Safety Plan
• Fire Egress Plan
• Civil Engineering Sheets
• Site Plan
• Existing conditions (as base)
• Discipline specific notes, legends, code references, symbols and abbreviations.
• Monuments and benchmarks identified with coordinates and elevations.
• Site features: roads, parking, structures, walks, steps, walls, etc.
• Utilities shown to scale (lighting, transformers, pull boxes, manholes, inlets, lift stations, propane tanks, septic tanks, culverts, etc.) Use appropriate symbols for small utility items (i.e. lighting, transformers, pull boxes, manholes, inlets, etc.
• Geotechnical testing areas, boring locations, percolation test holes
• Construction limits
• Road and Parking
• Existing conditions (as base) with plan and profile sheet outlines, as appropriate.
• Plan and profile sheets
• Typical cross-sections
• Road and parking cross-sections
• Road and parking centerline stations, bearings, distances, and curve data (layout tables, as appropriate)
• Accessible parking, drop-off, oversized parking, and all accessible routes clearly delineated
• Intersections and other site radii identified with radius and coordinates
• Construction limits
• Storm Water
• Existing conditions (as base)
• Collection, treatment (i.e. settlement ponds), and layouts (plan and profile sheets, as appropriate)
• Structures plans, elevations and details
• Construction limits
• Utilities Plans
• Existing conditions (as base)
• Water pumping, treatment, storage, and distribution system layout and profile (plan and profile sheets, as appropriate), component sizes, material callouts
• Wastewater collection, treatment, and disposal system layout and profile, component sizes, material callouts
• System processes and flow diagrams
• Utilities (identified for removal or abandonment, as appropriate)
• Construction limits
• Project Details
• Details (i.e. trenching details, thrust blocks, water/sewer line crossings, silt fence, sewer cleanouts, manholes, valves and boxes, curb stops, fire hydrants, air release valves, sewage air release valves, irrigation details, pressure relief valves, meters and boxes, pressure regulators, check valves and boxes, backflow preventors, septic tanks, absorption trenches, distribution boxes, piping connections, water well details, lift station details, storm water details, storage tank details)
• Landscape Architecture Sheets
• Demolition Plan (if required)
• Existing conditions (as base)
• Structures
• Plant material (tree protection, plants to be removed or salvaged)
• Utilities (identified for removal or abandonment)
• Storm water protection
• Site furnishings
• Clearing and grubbing
• Construction limits
• Site Plan
• Existing conditions (as base)
• Discipline specific notes, legends, symbols and abbreviations.
• Storm water protection
• Site features: roads, parking, structures, walks, steps, walls, etc.
• Accessible parking, drop-off, oversized parking, and all accessible routes clearly delineated
• Utilities shown, as appropriate, to scale (lighting, transformers, pull boxes, manholes, inlets, lift stations, propane tanks, septic tanks, culverts, etc.) Use appropriate symbols for small utility items (i.e.
lighting, transformers, pull boxes, manholes, inlets, etc.
• Sections and elevations identified
• Site elements and details identified
• Construction limits
• Site Layout Plan
• Existing conditions (as base)
• Roads, parking, walks and service areas:
• Coordinates for building and site layout (identify location of point - foundation, finish wall, etc.)
• Coordinates for all corner points of walks, parking, walls, and site features (identify location of point - foundation, face of curb, etc.)
• Control point, corner point, and radius point tables
• Dimensioned traffic markings
• Accessible parking, drop-off, oversized parking, and all accessible routes clearly dimensioned
• Dimensioned walks, steps, walls with footings, terraces, drainage and utility structures, and site elements
• Buildings and structures
• Finish floor elevations noted
• Roof overhangs, footings
• Outdoor lighting
• Above and below ground utilities, as appropriate
• Construction limits
• Grading Plan
• Existing conditions (as base)
• Existing contours and spot elevations
• Proposed grading
• Proposed contours (maximum 2 feet contour interval with each 10 feet interval in heavier pen weight and labeled)
• Spot elevations at all change in gradient, at all corners of walks, walls, parking, drainage inlets and outlets, and all site elements
• Spot elevations at top and bottom of walls, steps and ramps
• Accessible parking, drop-off, oversized parking, and all accessible routes have adequate spot elevations identified to construct to ABAAS requirements
• High points, low points, swale centerlines
• Storm water protection elements
• Finish floor elevations at each access point of structures
• Tree and vegetation protection
• Utility systems
• Construction limits
• Planting/Revegetation/Irrigation Plan
• Plant list with quantities and symbols
• Details and cross-sections
• Site Details
• Paving, finishes
• Erosion control (storm water protection)
• Accessibility
• Stairs, handrails, ramps
• Site furnishings
• Typical and special construction details
• Site Elevations
• Entrances
• Exterior materials with major site elements
• Dimensions
• Site Sections
• Typical sections
• Stairs
• Site Walls
• Material changes/connections, paving (curb/walk)
• Key site elements
• Sign Plan
• Traffic signs (park wayfinding and Manual on Uniform Traffic
Control Devices (MUTCD))
• Accessible signs
• Interpretive signs and waysides
• Pedestrian and trail signs
• Unique construction signs
• Architecture Sheets
• Finalized General Sheet(s)
• Notes, legends, code references, fire safety plan, symbols and abbreviations legends, and accessibility prototype layouts for entries, maneuvering and approach space, path clearances, and restroom fixtures and accessories
• Finalized Demolition Drawings with Legends
• Floor Plans
• Spaces individually delineated and labeled
• Section cut references
• General notes and annotations on the same sheet
• Dimensions
• Clearly Identify demo work
• Roof Plans
• Section cut references
• Plan dimensions
• General notes and annotations
• Clearly Identify demo work
• Building Sections
• Floor levels
• Vertical dimensions/floor levels
• Spaces labeled
• General notes and annotations on the same sheet
• Clearly Identify demo work
• Building Elevations
• Entrances, window arrangements, doors
• Exterior materials with major vertical and horizontal joints
• Roof levels and overhangs
• Vertical Dimensions
• General notes and annotations on the same sheet
• Clearly Identify demo work
• Finalized New or Adaptive Use Drawings
• All Building Floor Plans
• Spaces individually delineated and labeled
• Section cuts and detail references
• Enlarged layouts of special spaces (dimensioned)
• Plan Dimensions (verified with structural)
• Finish floor elevations
• Door swings and marks
• Entries with power operated doors per DSC Accessibility
Standards
• Window openings and marks
• Stairs and elevators
• Overhead openings dashed
• Wall types call-outs
• Signage type location reference
• General notes and annotations on the same sheet
• Material legends
• Clearly distinguish new work from existing
• All Building Roof Plans
• General notes and annotations on the same sheet
• Section cut references
• Plan dimensions
• Indicate roof pitch/taper and drainage arrows
• Gutters and downspouts
• Primary and secondary roof drains and scuppers
• Label roof assembly and deck materials
• Maintenance/service access path
• Clearly distinguish new work from existing
• Identify plumbing, Heating, Ventilation & Air Conditioning
(HVAC) and electrical roof penetrations, equipment, and architectural features
• All Building Elevations
• Entrances, window arrangements, doors
• Exterior materials with major vertical and horizontal joints
• Roof levels and overhangs dimensioned
• Vertical dimensions and elevations
• General notes and annotations on the same sheet
• Clearly distinguish new work from existing
• Building Sections (minimum one longitudinal and one transverse)
• Floor to floor dimensions (verified with structural)
• Vertical dimensions with elevation targets
• Stairs and elevator shafts
• Typical ceiling heights
• Room labels
• General notes and annotations on the same sheet
• Building and wall section references
• Detail References
• Clearly distinguish new work from existing
• Interior Elevations
• Floor to floor dimensions with elevation targets
• Doors and windows
• Millwork with custom construction/features
• Wall finishes
• Ceiling heights and finishes
• Materials legends
• Clearly distinguish new work from existing
• Floor finishes
• Accessories with legends
• All Reflected Ceiling Plans
• Ceiling configuration and materials legends
• Lighting fixture layout
• Clearly distinguish new work from existing
• All roof construction details
• All wall sections referenced to building plans and sections
• All roof, door, and window details referenced to plans and schedules
• Typical wall types
• All special construction details
• All Room finish, hardware, door and window schedules
• All millwork plans, sections, elevations, and details
• All Equipment layouts dimensioned
• Keynotes shall contain complete text note, not specification reference
• Keynote Legend shall be on the same sheet as keynote reference
• Project signage including custom/marque (architectural), accessible
(tactile and visual), heritage (military) signs, site (traffic), and exit signs required by code. Typology, schedule, layout detail and mounting locations/elevations required.
• All accessibility dimensions shall be specific to drawing/detail location, utilizing an accessible route plan, not referenced remotely to a standards sheet with prototypes.
• Structural Sheets
• General
• Applicable Codes and Standards
• Listing of design loads and all required information in accordance with International Building Code (IBC) Section 1603
• Listing of all structural materials used, including material strengths
• Exposure Category and requirements for concrete
• Diaphragm fastening requirements
• Requirements for special inspection IBC Chapter 17
• List of abbreviations
• Symbols legend
• Standard Details
• Standard details applicable to the project
• Control joint details for all materials. Control joints shall be located by dimension on the plan sheets. References to the architectural drawings for control joint locations are unacceptable.
• Reinforcing steel splice length schedule
• Lintel schedule(s)
• Shearwall schedule
• Foundation Plan
• Fully dimensioned foundation plan (references to the architectural drawings for foundation dimensions are unacceptable) including:
• Overall building dimensions
• Column gridlines
• Location of foundation elements with respect to column gridlines
• Location of slab edges
• Location of control joints
• Location of slab recesses
• Location of elevator pits
• Location of footing and foundation wall steps
• Location of foundation wall masonry ledges
• Size of all foundation elements
• Foundation wall thickness
• Top of footing elevations (locating top of footing with respect to finished grade is not acceptable)
• Masonry ledge elevations
• Top of wall elevations
• All required section cuts
• Floor Framing Plan
• Fully dimensioned floor framing plan (references to the architectural drawings for framing dimensions are unacceptable) including:
• Overall building dimensions
• Column gridlines
• Location of framing elements with respect to column gridlines
• Top of beam elevations
• Size and spacing of framing members
• Locations of openings for floor penetrations
• Size and direction of span of floor sheathing or decking
• Camber requirements
• All required section cuts
• Roof Framing Plan
• Fully dimensioned roof framing plan (references to the architectural drawings for framing dimensions are unacceptable) including:
• Overall building dimensions
• Column gridlines
• Location of framing elements with respect to column gridlines
• Top of beam elevations
• Size and spacing of framing members
• Locations of openings for roof penetrations
• Size and direction of span of roof sheathing or decking
• Camber requirements
• All required section cuts
• Details
• Foundation Details
• Footing/foundation wall details showing relationship to floor structural system
• Piling/pile cap details showing relationship to floor structural system
• Floor Framing Details
• Connection Details
• Loading diagrams for special load cases for steel bar joists
• Column and base plate schedules for steel buildings
• Column and beam schedules for concrete buildings
• Roof Framing Details
• Connection Details
• Loading diagrams for special load cases for steel bar joists
• Column and base plate schedules for steel buildings
• Column and beam schedules for concrete buildings
• Prefab truss profiles with loading diagrams for all load cases
• Mechanical Sheets
• Site Mechanical Plan (if applicable, with all features drawn to scale)
• Detail drawings showing major mechanical details and sections, including all piping and ductwork connections to mechanical equipment.
• Mechanical Floor Plans (Heating, Ventilation & Air Conditioning (HVAC), plumbing, and fire protection), with all cross-references between sheets.
• Enlarged scale mechanical plans for mechanical rooms where all necessary plan information cannot be conveyed at a smaller drawing scale.
• Discipline specific notes, legends, code references, symbols and abbreviations.
• HVAC system schematics and flow diagrams
• Mechanical equipment schedules
• Plumbing fixture connection schedule
• Plumbing isometrics or riser diagrams for water systems and drain, waste, and vent (DWV) systems for each restroom, plumbing stack, or other groups of plumbing fixtures where all information cannot be shown on plan sheets
• HVAC control schematics and sequences of operation
• Electrical Sheets
• Electrical floor plans, with all cross-references between sheets
• Enlarged scale electrical plans for critical spaces where all necessary plan information cannot be conveyed at a smaller drawing scale
• Site electrical plan showing routing with telecommunications, site lighting, transformers, generators and vaults drawn to scale
• Detail drawings showing major electrical details and sections, including conduit routing to major electrical equipment
• Branch circuiting for all electrical devices
• Equipment disconnect switch locations and ratings
• Discipline specific notes, legends, code references, symbols and abbreviations.
• Panel board and light fixture schedules
• Fire alarm matrix, riser and device location plans
• Lightning protection plans (if applicable)
• Telecommunication plans (if applicable)
• Single line diagrams for power distribution, telecommunications, fire alarm, and security systems.
• Security system plans
• Control wiring diagrams
File details come from the government source that posted it. Updated .