Attachment 13 - GFE List Musical Equipment.pdf
PDF 6 MB Posted
- Attached to
- Child Development Center Playgrounds
- Solicitation number
- FA301027Q0002
About this file
This document is an installation guide for outdoor musical instruments manufactured by Freenotes Harmony Park. The guide covers three primary instruments: the Rhythm (a 9-note marimba), the Cadence (a 13-note marimba), and Tuned Drums (a 5-piece percussion set). Each instrument is available in multiple mounting configurations: in-ground recycled post, in-ground steel post, surface mount recycled post, surface mount steel post, and portable mount options. The Rhythm measures 23-3/4" W x 40-7/8" H x 14-1/2" D with coated fiberglass bars in C Major Diatonic scale. The Cadence measures 47-3/8" W x 49" H x 26-1/2" D in C Major Pentatonic scale. Tuned Drums feature five drums ranging from 6" to 15" in diameter with heights varying by age group (toddler and normal finished heights). All instruments feature recycled HDPE frames, coated fiberglass or composite construction, stainless steel hardware, and are designed for public park and recreational settings.
The installation guides provide step-by-step procedures for each mounting type. In-ground installations require excavating 10" diameter holes 36" deep and pouring concrete (approximately three to six 80-pound bags depending on the instrument). Surface mount installations require a minimum 24" x 24" x 6" concrete pad (or 48" x 24" x 6" for Cadence) with 3/8" anchor holes drilled 4" deep. Portable mounts require only alignment and thumb screw fastening to a stand. Recommended finished post heights are provided for different age groups: adults 36", ages 7-11 ranging from 32-33", ages 5-7 ranging from 27-28", and ages 3-5 ranging from 22-23". All installations emphasize a 36" perimeter clearance around instruments for wheelchair accessibility. Bill of materials include stainless steel fasteners, recycled plastic posts, holsters, anchor bolts, and specialized drivers. The company contact information is 833-262-1569 and www.freenotesharmonypark.com.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
40.86
4"
14.46
RHYT-SM-REC
RHYT-IG-REC
RHYT-IG-STL
RHYT-IG-REC
RHYT-SM-STL
RHYT-PM-STL
Rhythm Installation Guide www.freenotesharmonypark.com
833.262.1569
Revised 12/10/2021
Sheet 1
Sheet 5: Surface Mount Instalaltion Sheet 6: Portable Mount Installation Bars: Coated Fiberglass Frame: Recycled HDPE
Scale: C Major Diatonic Notes: (Left to Right): B, G, E, C, A, D, F, A, C Timbre: Bright and Percussive
Sheet 1: Basic Information Sheet 2: Bill of Materials Sheet 3: Pre-Installation Sheet 4: In Ground Installation
ITEM
NO. PART NUMBER DESCRIPTION
RHYT-
IG-
REC
RHYT-
IG-STL
RHYT-
SM-
REC
RHYT-
SM-STL
RHYT-
PM-
REC
RHYT-
PM-STL
1 RHYT-BOM Pre-Assembled Rhythm Instrument 1 1 1 1 1 1
2 HLSTR-SM-SS Small Stainless Steel Holster 1 1 1 1 1 1
3 POST-REC-72-DEG30-SIGN In Ground Recycled Post, 72"lg. w/ Name Plate 1 - - - - -
4 POST-STL-72-DEG30-SIGN In Ground Steel Post, 72"lg. w/ Name Plate (Powder-coated) - 1 - - - -
5 POST-REC-36-DEG30-SIGN Surface Mount Recycled Post, 36"lg.
w/ Name Plate - - 1 - 1 -
6 POST-STL-36-DEG30-SIGN Surface Mount Steel Post, 36"lg. w/ Name Plate (Powder-coated) - - - 1 - 1
7 8N125TBTS #8 Button Head Screw, 1.25"lg. SS, T15 tamp 4 - 4 - - -
8 10C100MBTS #10-24 Button Head Machine Screw, 1"lg. SS, T25 tamp - 4 - 4 - -
9 92198A634 3/8"-16 Hex Head Screw, 2.5"lg. SS - - - - 4 -
10 91185A867 3/8"-16 Thumb Screw, 1"lg. SS - - - - - 4
11 91185A346 #10-24 Thumb Screw, .5"lg. SS - - - - 4 4
12 31N500BHLS 5/16" Hex Head Lag Bolt, 5"lg. SS - - 2 - 2 -
13 POW 07315 3/8"-16 Wedge Expansion Anchor, 3.75"lg. SS - - - 4 - -
14 POW 07316 3/8"-16 Wedge Expansion Anchor, 5"lg. SS - - 4 - - -
15 94052A046 3/8" Socket Head Knob - - - - 4 -
16 91845A031 3/8"-16 Hex Nut, SS - - - - 4 4
17 9267K43 35/64" Hex Nut Cap - - 4 4 - -
18 SM-BASE-REC Surface Mount Base HDPE, For Recycled Post (1.5" Black) - - 1 - 1 -
19 RHYT-PM-PS Rhythm - HDPE Portable Stand (1" Black) - - - - 1 1
20 8N75UFT4 #8 Flat Head Screw, 0.75"lg. SS, tamp 4 4 4 4 4 4
21 12192 T25 x 1" Driver (Tamper Resistant) 1 - 1 - 1 -
22 12260B T15 x 1" Driver (Tamper Resistant) - 1 - 1 - 1
Bill of Materials Rhythm www.freenotesharmonypark.com 833.262.1569
Revised 12/10/2021 Sheet 2
7/11
Step 1: Attach Holster to Instrument. Mount the holster to the instrument back with the provided #8 Flat Head Screws and driver. Note that the back of the instrument is pre-drilled. Screw heads should be flush with the holster surface when properly installed. The holster should also be flush with the back of the instrument. Drive the screws slowly to prevent stripping the screws and pilot holes.
Step 2: Attach Instrument to Post. With two people, situate the Instrument (with holster installed) onto the post. Posts come predrilled and/or tapped. With the provided driver, fasten the instrument to the post with the provided #8 Button Head Screws (for recycled posts), #10-24 Button Head Machine Screws (for steel posts), or #10-24 Thumb Screws (for portable mount)
Pre-Installation Rhythm www.freenotesharmonypark.com 833.262.1569
Sheet 3
Post Length
Frost Depth
Finished Post Height
3/4
Step 1: Choose Instrument Height. Choose a finished post height. The installer can shorten the post and/or lengthen the mounting hole to achieve different heights.
Recommended Finish Post Heights: Adult, 36"; Ages 7-11, 33"; Ages 5-7, 28"; Ages 3-5, 23"
Post Length Calculation: Post Length = Finished Post Height + Frost Depth (36" Recommended)
Step 2: Excavate Mounting Hole. Excavate one 10" diameter hole, 36" deep at the installation location. Be sure to account for any secondary surface thickness.
Step 3: Mount Instrument. With two people, lower the post (with the instrument attached) into the excavated hole.
Step 4: Verify Placement. Verify the placement, levelness, and finished height of the instrument.
Check for sufficient clearance around the Instrument. A 36" perimeter around the instrument is recommended for wheelchair accessibility.
Step 5: Pour Concrete. Using approximately (3) 80lb. bags of concrete, pour concrete around the post. Brace the Instrument to hold it rigid while the concrete cures. Leave the concrete to set according to the concrete manufacturers guidelines.
In Ground Installation Rhythm www.freenotesharmonypark.com 833.262.1569
Sheet 4
24" 24"
6"
A
5/6
Concrete Pad
DETAIL A
SCALE 1 : 8
13/14
Step 1: Choose Instrument Hieght. The Standard height for Surface Mount Posts is 36". The recycled post may be modified in the field to the following heights:
Recommended Finish Post Heights: Adult, 36"; Ages 7-11, 32"; Ages 5-7, 27"; Ages 3-5, 22" Note: The height of surface mount steel posts cannot be adjusted.
Step 2: Determine installation location. The concrete pad must be atleast 24" long x 24" wide x 6" thick. If the concrete pad is at an angle, use steel washers (not included) to act as shims, leveling the instrument. If there is not an existing pad, use approximatly (4) 80lb. bags of concrete to pour a pad. Allow the concrete to cure per concrete manufacturers guidelines.
Step 3: (Recycled Post Only) Attach the surface mount base the bottom of the post using the provided 5/16" Hex Head Lag Bolts. The base should fit snuggly around the post. Make sure to align the holes on the base with the holes on the post.
Step 4: Mark and Drill Anchor Holes. With two people, place the instrument onto the pad and mark the center of the base holes. Next, set the instrument aside and use a hammer or rotary drill to drill 3/8" holes 4" deep into the concrete at the marked locations. A 3/8" masonry drill bit is required.
Step 5: Verify Placement. Place the instrument over the holes. Insert the provided anchor bolts into the holes. Position the anchor nuts flush with the top of each bolt. Verify the correct placement, levelness, and finished height of the instrument. Check for sufficient clearance around the Instrument. A 36" perimeter around the instrument is recommended for wheelchair accessibility.
Step 6: Mount Instrument. Pound the anchor bolts into the holes until the anchor washers are flush with the surface mount base. Tighten the anchor bolts until they are snug. Cover the exposed bolt sections with provided nut cap.
Note: If installing onto wet concrete, us the wet set anchor manufacturers guidelines for installation procedures.
Surface Mount Installation Rhythm www.freenotesharmonypark.com 833.262.1569
Sheet 5
B
DETAIL B
SCALE 1 : 8
9/10
5/6
Step 1: Choose Instrument Hieght. The standard height for Postable Mount Posts is 36". The recycled post may be modified in the field to the following heights:
Recommended Finish Post Heights: Adult, 36"; Ages 7-11, 33"; Ages 5-7, 28"; Ages 3-5, 23" Note: The height of surface mount steel posts cannot be adjusted.
Step 2: Situate Instrument. With two people, situate the instrument onto the portable stand and align the holes.
Step 3: Secure with Thumb Screws. Have one person hold the instrument while another person secures the instrument to the portabe stand with the provided 3/8"-16 thumb screws. Tighten the thumb screws snuggly to prevent rattling.
Note: The 3/16"-16 hex nuts are pre-pressed into the portable stand.
Portable Mount Installation Rhythm www.freenotesharmonypark.com 833.262.1569
Sheet 6
49" Adult 45" Ages 7-11 40" Ages 5-7 35" Ages 3-5
8"
2"
CADENCE INSTALLATION GUIDE
Main Features:
C Major Pentatonic• Recycled HDPE Frame• Coated Fiberglass Bars• Stainless Steel Hardware•
Contents:
SHEET 2 - Parts List and Instrument• to Post Installation SHEET 3 - In Ground Installation• SHEET 4 - Surface Mount Installation•
Weights:
Instrument Weight, 78lbs.• Boxed Instrument Weight, 85lbs.• Boxed Posts Weight, 35-72lbs.•
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
FREENOTES HARMONY PARK
544 CHESTNUT ST,
CHATTANOOGA, TN 37402
TEL: 833.262.1569
WWW.FREENOTESHARMONYPARK.COM
SHEET 1 OF 4
TIT
LE
SCALE: 1:16
REVISION: C
DATE: 1/30/2019
D W
G . N
O
C ad en ce
In st al la tio n G ui d e
C A
D E-
IN
ST
A
LL
3/4/5/6
DETAIL A
SCALE 1 : 4
DETAIL B
SCALE 1 : 4
9/10
DETAIL C
SCALE 1 : 6
Access panel for debris removal
#10 Flat Head Screw, 2"lg. SS, T25 tamp (Preinstalled)
Parts List:
Step 1: Start by mounting the Holsters to the Instrument Back with the provided #8 Flat Head Screws and Driver. The Back comes predrilled. Screw heads should be flush with the Holster surface when properly installed. Holster should also be flush along the back. Drive Screws slowly to prevent stripping.
Step 2: With two people, situate the Instrument with Holsters installed onto the Posts. Posts come predrilled and/or tapped. Fasten the Instrument to the Posts with the provided #8 Button Head Screw for Recycled Posts or #10-24 Button Head Machine Screw for Steel Posts. Drivers are provided.
ITEM NO. PART NUMBER DESCRIPTION In Ground Recycled QTY.
In Ground Steel QTY.
Surface Mount Recycled QTY.
Surface Mount Steel QTY.
1 CADE-BOM Pre-Assembly - Cadence Instrument 1 1 1 1 2 HLSTR-SM-SS Small SS Holster 2 2 2 2 3 POST-REC-72-DEG30 In Ground Recycled Post, 72"lg. 2 - - - 4 POST-REC-36-DEG30 Surface Mount Recycled Post, 36"lg. - - 2 - 5 POST-STL-72-DEG30-FP In Ground Steel Post, 72"lg. (Powder-coated) - 2 - - 6 POST-STL-36-DEG30-FP Surface Mount Steel Post, 36"lg. (Powder-coated) - - - 2 7 SM-BASE-REC Surface Mount Base HDPE, For Recycled Post (1.5" Black) - - 2 - 8 8N50UFT4 #8 Flat Head Screw, .5"lg. SS, T15 tamp 8 8 8 8 9 8N125TBTS #8 Button Head Screw, 1.25"lg. SS, T15 tamp 8 - 8 -
10 10C100MBTS #10-24 Button Head Machine Screw, 1"lg. SS, T25 tamp - 8 - 8 11 31N500BHLS 5/16" Hex Head Lag Bolt, 5"lg. SS - - 4 - 12 9267K43 35/64" Hex Nut Cap - - 8 8 13 POW 07316 3/8"-16 Wedge Expansion Anchor, 5"lg. SS - - 8 - 14 POW 07315 3/8"-16 Wedge Expansion Anchor, 3.75"lg. SS - - - 8 15 12260B T15 x 1" Driver (Tamper Resistant) 1 1 1 1 16 12192 T25 x 1" Driver (Tamper Resistant) - 1 - 1
SHEET 2 OF 4SCALE: 1:16REVISION: C DATE: 1/30/2019CADE-INSTALLDWG. NO.
Finished Post Height
Frost Depth
Post Length
10"
3/5
Step 1: Excavate two 10" diameter holes, 36" deep, and 30" on center at the installation location.
Contractor can modify Post to desired height.
Post Length = Frost Depth (36" Recommended) + Finished Post Height
Finished Post Height Guideline: (Ages 3-5, 22") (Ages 5-7, 27") (Ages 7-11, 32") (Adult, 36")
Step 2: With two people, lower the Posts with the Instrument attached into the excavated holes.
Step 3: Verify the correct placement, levelness, and finished height of the Instrument.
Check for sufficient clearance around theInstrument, a 36" perimeter around the Instrument is recommended for wheelchair accessibility.
Step 4: Last pour concrete around the posts. It is recommended to brace the Instrument to hold it rigid while the concrete cures. Leave to set according to the concrete manufacturers guidelines. Approximately (6) 80lb. bags will be needed.
SHEET 3 OF 4SCALE: 1:14REVISION: C DATE: 1/30/2019CADE-INSTALLDWG. NO.
48"
24"
6"
4/6
Concrete Pad
DETAIL D
SCALE 1 : 5
13/14
Step 1: Standard height for Surface Mount Posts are 36". The Recycled Posts may be modified in the field to the following heights:
(Ages 3-5, 22") (Ages 5-7, 27") (Ages 7-11, 32") (Adult, 36") The height of Surface Mount Steel Posts can not be adjusted.
Step 2: Determine installation location. Verify concrete footing is a minimum of 48" long x 24" wide x 6" thick. If the concrete pad is at an angle, steel washers are required to act as shims (Shims not provided). If there is not already an existing pad, approximately (7) 80lb. bags will be needed. Allow concrete to cure per concrete manufacturers guidelines.
Step 3 (Recycled Post Only): Install the Surface Mount Bases to the bottom of the Posts. Align the holes on the Bases with the holes on the Posts. The Bases should fit snuggly around the Posts. Fasten them together with the provided 5/16" Hex Head Lag Bolts.
Step 4: With two people place the Instrument Assembly with Posts attached onto the concrete pad and mark the center of the holes on the surface mount bases. After you have made your marks, set aside the Instrument in order to drill for anchor holes. With a hammer or rotary drill, drill through concrete at marked locations. Drill to a minimum depth of 4". A 3/8" masonry drill bit will be needed.
Step 5: Place the Instrument back over the drilled out holes. Insert provided anchor bolts into aligned holes. Position anchor nut so that it is flush with the top of the bolt. Pound anchor bolts into the hole until the anchor washer is flush with the surface mount bases. Tighten anchor bolts until they are snug. Cover remaining bolt sections with provided nut caps.
Step 6: Verify the correct placement, levelness, and finished height of the Instrument.
Check for sufficient clearance around the Instrument, a 36" perimeter around the Instrument is recommended for wheelchair accessibility.
Step 7: If installing onto wet concrete, us the wet set anchor manufacturers guidelines for installation procedures.
SHEET 4 OF 4SCALE: 1:13REVISION: C DATE: 1/30/2019CADE-INSTALLDWG. NO.
833-262-1569 info@freenotesharmonypark.com freenotesharmonypark.com
SCAN TO LISTEN TO
THE INSTRUMENT
S P E C I F I C A T I O N S :
CADENCE
Deep vibrant tones ring clear on the Cadence marimba. Wide, coated fiberglass keys create sounds similar to a wooden instrument with rich, warm timbre. The Cadence also features a resonated base composed entirely of reinforced recycled plastic so it’s both rugged and green!
P A R T N U M B E R S :
Inground Mount
CADE-IG-REC
CADE-IG-STL
Surface Mount
CADE-SM-REC
CADE-SM-STL
Portable Mount
CADE-PM-REC
CADE-SM-STL
Style: Marimba
Tonal Quality: Earthy/Percussive
Notes: 13
Note Material: Coated Fiberglass
Resonated: Yes
Key/Scale: C Major Pentatonic
Range: Bass/Tenor
Mallets: 2 Black (80 Durometer)
Dimensions: 47-3/8”W x 49”H x 26- 1/2”D
833-262-1569 info@freenotesharmonypark.com freenotesharmonypark.com
SCAN TO LISTEN TO
THE INSTRUMENT:
S P E C I F I C A T I O N S :
Style: Marimba
Tonal Quality: Earthy/Percussive
Notes: 9
Note Material: Coated Fiberglass
Resonated: Yes
Key/Scale: C Major Pentatonic
Range: Alto/Soprano
Mallets: 2 Black (80 Durometer)
Dimensions: 23-3/4”W x 40-7/8”H x 14-1/2”D
RHYTHM
The fiberglass bars on the Rhythm inspire joy and movement. It is a space-saving design providing the African sounds of a wooden instrument without the maintenance challenges.
Rhythm is a natural-sounding instrument in a beautiful, natural color and a percussive cousin to the Melody.
P A R T N U M B E R S :
Inground Mount:
RHYT-IG-REC
RHYT-IG-STL
Surface Mount
RHYT-SM-REC
RHYT-SM-STL
Portable Mount
RHYT-PM-REC
RHYT-PM-STL
https://www.freenotesharmonypark.com/products/instruments/melody
H ei gh ts v ar y by
A ge
G ro up
15"
12"
10"
8"
6"
Rainbow Arrangement
Natural Arrangement
Taupe Arrangement
Moss Arrangement
TUNED DRUMS INSTALLATION GUIDE
Main Features:
Low to High Tuning• Cap Color Options•
Contents:
SHEET 2 - In Ground Installation w/ Parts List• SHEET 3 - Surface Mount Installation w/ Parts List•
Weights:
Instrument Total Weight, 60-84lbs.• Boxed Instrument Total Weight, 90-110lbs.• Individual Drum Weights very per style and• finshed height selection
Cap Color Options:
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
FREENOTES HARMONY PARK
544 CHESTNUT ST,
CHATTANOOGA, TN 37402
TEL: 833.262.1569
WWW.FREENOTESHARMONYPARK.COM
SHEET 1 OF 3
TIT
LE
SCALE: 1:16
REVISION: NA
DATE: 2/9/2018
D W
G . N
O
Tu ne d D ru m s - In st al la tio n G ui d e
TD
-IN
ST
Fi ni sh ed
H ei gh t
(C on cr et e to
T op o f D ru m
Drum Installed 5" into Concrete
(3" or Less) (9" or Greater)
6" Thick Concrete Pad
Parts List:
Step 1: Arrange Drums in desired location and pattern. Drums can be laid out in any configuration desirable, but must be installed less than 3" or greater than 9" apart. WARNING: Between 3" and 9" there lies a chance for a child's head to get stuck.
(Reference: US Consumer Product Safety Commission, Public Playground Safety Handbook)
Step 2: Determine border of trench for concrete pad. Trench should be a minimum of 6" deep. Concrete pad should perform under local soil and weather conditions.
Step 3: Excavate trench to required depth. Check levelness of trench then pour concrete and fill trench completely per code requirements. Immediately after the concrete has been poured, drive the Tuned Drums into the wet concrete per your chosen layout.
Step 4: The bottom edge of the Drum Bases are scalloped to assist in their installation into the concrete. Twist Drums into concrete to a depth of 5". Check for plumbness, if needed brace the Drums to keep them rigid and in place during the curing process.
Leave to set according to the concretemanufacturer's guidelines.
Step 5: Check for sufficient clearance around instruments. A 36" clearance is recommended around the the entire Drum arrangement for wheelchair accessibility, however this is not required for proper function. Drums may also be installed next to a wall or in a variety of different configurations.
Step 6: Remove plastic film from drum caps if applicable.
ITEM NO. DESCRIPTION QTY. NORMAL FINISHED HEIGHT TODDLER FINISHED HEIGHT
1 15" In Ground Tuned Drum 1 37" 29" 2 12" In Ground Tuned Drum 1 35" 27.5" 3 10" In Ground Tuned Drum 1 33" 26" 4 8" In Ground Tuned Drum 1 31" 24.5" 5 6" In Ground Tuned Drum 1 29" 23"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
FREENOTES HARMONY PARK
544 CHESTNUT ST,
CHATTANOOGA, TN 37402
TEL: 833.262.1569
WWW.FREENOTESHARMONYPARK.COM
SHEET 2 OF 3
TIT
LE
SCALE: 1:16
REVISION: A
DATE: 2/9/2018
D W
G . N
O
In G ro un d In st al la tio n w ith P ar ts
L ist
TD
-IN
ST
(3" or Less) (9" or Greater)
6" Thick Concrete Pad
Fi ni sh ed
H ei gh t
(C on cr et e to
To p of
D ru m
DETAIL A
SCALE 1 : 4
Parts List:
Step 1: Arrange Drums in desired location and pattern. Drums can be laid out in any configuration desirable, but must be installed less than 3" or greater than 9" apart.
WARNING: Between 3" and 9" there lies a chance for a child's head to get stuck.
(Reference: US Consumer Product Safety Commission, Public Playground Safety Handbook)
Step 2: Once you have decided your layout, replace drums with the provided Anchor Discs. Mark holes on the concrete through the (3) holes on all of the Anchor Discs. Set aside Discs, drill 1/4" holes 2" into concrete at marked locations. A 1/4" masonry drill bit will be needed. Contractor to provide a concrete slab that will perform under local soil and weather conditions. (If anchoring to a material other than concrete, fasteners to be provided by the customer)
Step 3: Place the Anchor Discs back over the drilled out holes. Insert provided anchor bolts into aligned holes. Position anchor nut so that it is flush with the top of the bolt. Pound anchor bolts into the hole until the anchor washer is flush with the post base. Tighten anchor bolts until they are snug.
Step 4: Install the Drums over the Anchor Discs. Predrill (4) 1/8" holes in a 90 cross pattern, 1" up from the bottom of the drum. Drill through both Drum and Anchor Disc. When predrilling holes, make sure they clear the previously installed anchor bolts, and that there is clearance for the 2" screws to be installed without interfering with the other drums. Secure Drums to Discs with the provided #10 Butten Head Screws and Driver.
Step 5: Check for sufficient clearance around instruments.
A 36" clearance is recommended around the the entire Drum arrangement for wheelchair accessibility, however this is not required for proper function.
Drums may also be installed next to a wall or in a variety of different configurations.
Step 6: Remove plastic film from drum caps if applicable.
ITEM NO. DESCRIPTION QTY. NORMAL FINISHED HEIGHT TODDLER FINISHED HEIGHT
1 15" Surface Mount Tuned Drum 1 37" 29" 2 12" Surface Mount Tuned Drum 1 35" 27.5" 3 10" Surface Mount Tuned Drum 1 33" 26" 4 8" Surface Mount Tuned Drum 1 31" 24.5" 5 6" Surface Mount Tuned Drum 1 29" 23" 6 Surface Mount Anchor Disc 5 - - 7 1/4 x 3.25" Anchor Bolt, SS 15 - - 8 #10 Button Head Screw, 2"lg. SS, T25 tamp 20 - - 9 Security Driver 1 - - PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF FREENOTES HARMONY
PARK IS PROHIBITED.
FREENOTES HARMONY PARK
544 CHESTNUT ST,
CHATTANOOGA, TN 37402
TEL: 833.262.1569
WWW.FREENOTESHARMONYPARK.COM
SHEET 3 OF 3
TIT
LE
SCALE: 1:24
REVISION: A
DATE: 2/9/2018
D W
G . N
O
Su rfa ce M ou nt
In st al la tio n w ith
P ar ts L ist
TD
-IN
ST
| RHYT-INSTALL-rev 2.pdf |
| Sheet1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View7 |
| Drawing View8 |
| Drawing View10 |
| Drawing View11 |
| Drawing View12 |
| Drawing View13 |
| Sheet 2 |
| Sheet 3 |
| Drawing View23 |
| Sheet 4 |
| Drawing View28 |
| Sheet 5 |
| Drawing View29 |
| Detail View A (1 : 8) |
| Sheet 6 |
| Drawing View31 |
| Detail View B (1 : 8) |
| CADE-INSTALL-revC.pdf |
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View19 |
| Sheet2 |
| Drawing View14 |
| Detail View A (1 : 4) |
| Detail View B (1 : 4) |
| Detail View C (1 : 6) |
| Sheet3 |
| Drawing View20 |
| Sheet4 |
| Drawing View11 |
| Detail View D (1 : 5) |
| Cadence 2.pdf |
| Rhythm 1.pdf |
| DRUMS-INSTALL-revA.pdf |
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View4 |
| Drawing View8 |
| Drawing View9 |
| Drawing View10 |
| Drawing View11 |
| Sheet2 |
| Drawing View5 |
| Sheet3 |
| Drawing View6 |
| Detail View A (1 : 4) |
File details come from the government source that posted it. Updated .