Exhibit_Hall_Rigging_Steel.pdf

This is a technical specification document for exhibit hall rigging steel related to a rigging services contract opportunity with the County of Volusia, Ocean Center in Florida. The document provides detailed structural specifications for rigging installations across the convention center and arena facilities. The convention center spans 93,028 square feet with a 32-foot ceiling height and a maximum load-bearing capacity of 3,500 pounds per load point with up to 12 points per beam, supporting approximately 50 events annually. The arena features a 7,010-seat capacity with a 172'5" by 250' playing surface, a 45-foot ceiling height, and a permanent rigging grid consisting of W14x90 and W14x99 beams arranged in approximately 24-foot by 24-foot grids in the east structure and 55-foot by 24-foot spacing in the remainder of the facility, supporting approximately 60 events annually. The facility is equipped with two forklifts (CAT 5,000-pound capacity and Toyota 4,000-pound capacity), two electric scissor lifts (Genie 30-foot and 20-foot models), and one Genie S-60 DC boom lift with 60-foot working height and 40-foot reach.

The document specifies detailed beam load limits and structural requirements provided in PDF and DWG file formats to support rigging contractors in designing and executing motor and chain hoist services, truss system installations, rigging hardware supply (shackles, slings, and cables), and specialized rigging for lighting, audio, video, and scenic elements. The selected contractor will serve as the exclusive rigging services provider for the facility, with flexibility to provide on-site certified rigging supervision at a predetermined hourly rate for third-party installations in buyout scenarios, with costs borne by the client. The specifications ensure that all rigging services comply with the facility's structural limitations and event requirements.