Exhibit 3 Chutes-VA HOSPITAL_Redacted.pdf
PDF 497 KB Posted
- Attached to
- 36C25623R0012 - 520-22-178-Z1DZ--CON Correct FCA Deficiencies related to Project No. 520-22-178
- Solicitation number
- 36C25622R0012
About this file
This document contains specifications for trash and linen chutes to be installed at a VA hospital in Mississippi, as well as information on a related federal contract opportunity. The specifications indicate that one trash chute and one linen chute will be provided according to NFPA82 Edition 2014 standards. Each chute will be 24 inches in diameter with 16 gauge aluminized steel construction. Intake doors will be made of stainless steel and located on the second through fourth floors. Additional included features are lever handles, sound insulation coating, isolation pads, accordion discharge doors, sanitizing units, vent caps and flashing. Floor supports, a wash-down spray head and sprinkler system are also specified. The related federal contract opportunity is a re-solicitation under number 36C25623R0012 for project 520-22-178 to correct deficiencies at the facility. This is a 100% set-aside for Veteran Owned Small Businesses.
View the file
Other files
Show all 45
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
600 Twin Rail Drive Phone: (815)723-7632 Minooka, IL 60447 Fax: (815)723-7652
VA Gulf Coast Veterans Health Care System 400 Veterans Avenue Biloxi, Mississippi 39531
RE: VA Hospital - Mississippi
ONE (1) TRASH CHUTE per NFPA82 Edition 2014, EACH to be equipped as follows:
24” diameter 16 gauge aluminized steel Three (3) U.L. ‘B’ label 15” x 18” bottom hinged, hand operated, stainless steel intake doors
250° maximum door temperature rise over 30 minutes, 1-1/2 hour assembly – doors located at 2nd-4th floors
Lever handles Factory applied Daubert V-Damp ‘3680’ soundcoat Korfund type isolator pads Accordion style discharge door Sanitizing unit with 15”x15” access door Full diameter vent cap, body, and flashing
ONE (1) LINEN CHUTE per NFPA82 Edition 2014, EACH to be equipped as follows:
24” diameter 16 gauge aluminized steel Three (3) U.L. ‘B’ label 21” x 21” side hinged, hand operated, stainless steel intake doors
250° maximum door temperature rise over 30 minutes, 1-1/2 hour assembly – doors located at 2nd-4th floors
Lever handles Factory applied Daubert V-Damp ‘3680’ soundcoat Korfund type isolator pads Accordion style discharge door Sanitizing unit with 15”x15” access door Full diameter vent cap, body, and flashing
In addition to the above material, American Chute LLC has included all necessary 1-1/2” X 1-1/2” X 1/8 floor supports, a wash-down spray head, and a sprinkler head above the top intake, with additional sprinkler heads at alternate floors. Throat dimensions of the chute radius plus 10” assumed unless otherwise stated. Sprinkler heads are ‘snug fit’ installed in the coupling above the appropriate intake doors. Final connection (tightening, pressure testing, leak detection, etc) is the responsibility of others,
File details come from the government source that posted it. Updated .