Enclosure 2 SOW Hydro Test JAU-8 Male Female Bodies.pdf
PDF 132 KB Posted
- Solicitation number
- N0017424SN0085
About this file
This Statement of Work (SOW) details hydrostatic testing requirements for JAU-8 Male (10551448 REV K) and Female (10551449 REV J) Bodies for the Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD). The testing involves a 2% sample of parts that must be subjected to 14,000-15,000 PSI pressure for a minimum of 15 seconds, with a pass/fail criteria of no pressure loss, deformation, or mechanical failure. Additional requirements include assembling parts with thread protection, cleaning and passivating per ASTM A380/A380M standards, and submitting Certificates of Compliance.
The contractor must perform in-house visual inspections and maintain quality control documentation for at least one year after contract completion. Final acceptance will be determined by the Government through 100% sample inspection at the government destination. The SOW allows the government discretion to accept defects on a case-by-case basis and potentially increase inspection sample sizes if deemed necessary to validate any discrepancies or issues.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Hydro Testing JAU-8 Male & Female Bodies Enclosure 2
1. PURPOSE
The Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal
Technology Division (NSWC IHEODTD) requires a 2% sample of hydrostatic testing for the assembly consisting of JAU-8 Body, Female, 10551449 and Body, Male, 10551448.
2. REQUIREMENTS
2.1. The setup/procedure for completing the hydrostatic test is at the vendors discretion, using industry best practices.
2.2 Parts shall be assembled with and have their threads sealed in a manner that will not damage the threads, when disassembled.
2.3 The parts must be subjected to a pressure of 14,000 – 15,000PSI, for a minimum of
15 seconds, with a pass/fail criteria being that must not exhibit any loss of pressure, deformation or mechanical failure.
2.4 All parts are then to be cleaned and Passivated IAW ASTM A380/A380M.
3. PACKAGING AND SHIPPING
3.1 Please refer to Form 43 for packaging and shipping requirements.
4. QUALITY ASSURANCE
The contractor shall submit Certificates of Compliance (Per 10551448 & 10551449 Form
16), including sub-vendor processes, certifying that each JAU-8 hardware component deliverable (Body, Male, 10551448 REV K & Body, Female 10551449 REV J) have been checked / visually inspected and meet the requirements of this SOW. The contractor shall maintain quality and process controls that will be used to ensure that the production parts will be in compliance with the applicable specifications and this SOW. The contractor shall maintain documentation and processes that will be used to identify, record, and disposition non-conforming material, in-process rejects/reworks and characteristic discrepancies. This documentation shall be kept by the contractor until further notified by the Government; at a minimum of one year after contract completion.
5. INSPECTION AND FINAL ACCEPTANCE
The contractor shall utilize best engineering practices and develop procedures to ensure that the each end item meets the requirements identified within the SOW. The contractor is responsible for the performance of in-house checks / visual inspections to ensure each
JAU-8 hardware component (Body, Male, 10551448 REV K & Body, Female 10551449
REV J) are in conformance with this SOW. Final acceptance will be determined by the
Government at Government destination and utilizing 100% inspection of samples.
Statement of Work
Hydro Testing JAU-8 Male & Female Bodies Enclosure 2
Acceptance of each delivery / lot of hardware will only occur after all requirements specified within have been completed and passed. Notwithstanding the above, the
Government may at its discretion, accept a defect on a waiver on a case-by-case basis.
The Government may at its discretion increase inspection sample size if determined necessary as to validate any discrepancy variations/issues.
File details come from the government source that posted it. Updated .