TE11 Standard Job Description Report - CAPE H.xlsx

HENRY

JOB TEXT: CARRY OUT 2000HR/6 MONTH MAINTENANCE FOLLOWING INSTRUCTIONS IN THE OEM INSTRUCTION MANUAL.

CHANGE OIL

CHANGE FILTER

INSPECT/CLEAN SUMP

CLEAN OIL SUCTION SCREEN

TEST LOW OIL PRESS

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based AC UNIT,ACCOMODATION,# 2,PORT 2000 Hour Service 0 2000 Hours AC UNIT,ACCOMODATION,# 2,PORT HOTEL SERVICES; HEATING/VENTILATION/AIR CONDITIONING; AC UNIT,ACCOMODATION,# 2,PORT HEATING, VENTILATION, AIR CONDITIONING, COMPRESSOR

JOB TEXT: CARRY OUT 2000HR/6 MONTH MAINTENANCE FOLLOWING INSTRUCTIONS IN THE OEM INSTRUCTION MANUAL.

CHANGE OIL

CHANGE FILTER

INSPECT/CLEAN SUMP

CLEAN OIL SUCTION SCREEN

TEST LOW OIL PRESS

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based ACCOMODATION/BOARDING SYSTEMS Quarterly Inspection 4 0 MONTHS ACCOMODATION/BOARDING SYSTEMS MOORING AND DOCKING; ACCOMODATION/BOARDING SYSTEMS ACCOMMODATION / BOARDING SYSTEMS

JOB TEXT: VISUALLY INSPECT AND OPERATIONALLY TEST THE FOLLOWING COMPONENTS

OF THE ACCOMMODATION / BOARDING SYSTEM:

WINCH,ACOM LADDER,PORT,4,DK,FRAME 76

WINCH,ACOM LADDER,STBD,4 DK,FRAME 76

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

ALL PARTS AND MATERIALS ARE TO BE OWNER FURNISHED.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based ALARM AND MONITORING SYSTEM Weekly Maint 1 0 WEEKS ALARM AND MONITORING SYSTEM AUTOMATION AND REMOTE CONTROL SYSTEMS; POWER MANAGEMENT SYSTEM, ENG CNTRL RM; ALARM AND MONITORING SYSTEM BILGE SYSTEMS

JOB TEXT: VISUALLY INSPECT AND OPERATIONALLY TEST THE FLOATS AND ALARMS

OF THE BILGE ALARM SYSTEM.

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

ALL PARTS AND MATERIALS ARE TO BE OWNER FURNISHED.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based ANCHOR HANDLING SYSTEMS Annual Maint 12 0 MONTHS ANCHOR HANDLING SYSTEMS MOORING AND DOCKING; ANCHOR HANDLING SYSTEMS PORT AND STBD ANCHOR WINDLASSES/CAPTSANS

JOB TEXT: PERFORM MAINTENANCE IN ACCORDANCE WITH THE EOM INSTRUCTION MANUALS:

Inspect/Maintain Anchor Windlass Brake Inspect Maintain Anchor Windlass

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based ANCHOR HANDLING SYSTEMS Bi-Monthly Maint 2 0 MONTHS ANCHOR HANDLING SYSTEMS MOORING AND DOCKING; ANCHOR HANDLING SYSTEMS ANCHOR HANDLING SYSTEMS

JOB TEXT: VISUALLY INSPECT AND OPERATIONALLY TEST THE FOLLOWING COMPONENTS

OF THE ANCHOR HANDLING SYSTEM:

ANCHOR CHAIN, PORT

ANCHOR CHAIN, STBD

ANCHOR WINDLASS,PORT

ANCHOR WINDLASS,STBD

ANCHOR, PORT

ANCHOR, STBD

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

ALL PARTS AND MATERIALS ARE TO BE OWNER FURNISHED.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based ANCHOR HANDLING SYSTEMS Semi-Annual Maint 6 0 MONTHS ANCHOR HANDLING SYSTEMS MOORING AND DOCKING; ANCHOR HANDLING SYSTEMS ANCHOR WINDLASS/MOORING (STBD, PORT)

Job Text: Grease the anchor windlasses/capstans in accordance with the OEM instruction manuals:

ANCHOR WINDLASS,PORT

ANCHOR WINDLASS,STBD

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - BALLAST SYSTEM Bi-Monthly Maint 2 0 MONTHS AUTOMATION - BALLAST SYSTEM AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - BALLAST SYSTEM AUTOMATION - BALLAST SYSTEM

Job Text: Visually inspect and operationally test the following components of the Ballast system:

AUTOMATION - BALLAST SYSTEM: Test operate the ballast valves from the remote operating stations.

VALVE, BALLAST, B1, FORE PEAK WB TK

VALVE, BALLAST, B10, #2 WBLS TK PORT

VALVE, BALLAST, B11, #2 DBWB TK STBD

VALVE, BALLAST, B12, #2 DBWB TK PORT

VALVE, BALLAST, B13, #3 WBUS TK STBD

VALVE, BALLAST, B14, #4 WBUS TK PORT

VALVE, BALLAST, B15, #3 WBLS TK STBD

VALVE, BALLAST, B16, #3 WBLS TK PORT

VALVE, BALLAST, B17, #3 DBWB TK STBD

VALVE, BALLAST, B18, #3 DBWB TK PORT

VALVE, BALLAST, B19, #4 WBUS TK STBD

VALVE, BALLAST, B2, FORE WB TK

VALVE, BALLAST, B20, #4 WBUS TK PORT

VALVE, BALLAST, B21, #4 WBLS TK STBD

VALVE, BALLAST, B22, #4 WBLS TK PORT

VALVE, BALLAST, B23, #4 DBWB TK CENTER

VALVE, BALLAST, B3, #1 WBUS TK STBD

VALVE, BALLAST, B36 AFT PEAK WB TK STBD

VALVE, BALLAST, B37 AFT PEAK WB TK PORT

VALVE, BALLAST, B38, SEA SUCTION, AFT

VALVE, BALLAST, B39, OVERBOARD

VALVE, BALLAST, B4, #1 WBUS TK PORT

VALVE, BALLAST, B5, #1 WBLS TK STBD

VALVE, BALLAST, B6, #1 WBLS TK PORT

VALVE, BALLAST, B7, #2 WBUS TK STBD

VALVE, BALLAST, B8, #2 WBUS TK PORT

VALVE, BALLAST, B9, #2 WBLS TK STBD

VALVE, BILGE/BALLAST, B40 OUTBD P/P

VALVE, BILGE/BALLAST, B41 INBD P/P

VLV, BALLAST, B24, OUTBD PP/STBD TUNNEL

VLV, BALLAST, B25, SUCTION OUTBD PUMP

VLV, BALLAST, B26, OUTBD PP - SEA CHEST

VLV, BALLAST, B27, DISCHARGE OUTBD PUMP

VLV, BALLAST, B30, INBD PP - SEA CHEST

VLV, BALLAST, B31, SUCTION INBD PUMP

VLV, BALLAST, B32, INBD PP/PORT TUNNEL

VLV, BALLAST, B33, DISCHARGE INBD PUMP

VLV, BALLAST, B34 INDB P/P DISCH TO SEA

VLV, BALLAST, B35 OUTDB P/P DISCH TO SEA

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - MAIN DIESEL ENGINE Annual Maint 12 0 MONTHS AUTOMATION - MAIN DIESEL ENGINE AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - MAIN DIESEL ENGINE Main Engine Automation Test

JOB TEXT: PERFORM ANNUAL MAINTENANCE TESTING OF MAIN ENGINE PRAXAIR AUTOMATION IN ACCORDANCE WITH OEM INSTRUCTIONS.

Perform testing of Main Engine Praxair Automation.

Report any noteworthy findings or repairs against associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - MAIN DIESEL ENGINE Bi-Monthly Maint 2 0 MONTHS AUTOMATION - MAIN DIESEL ENGINE AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - MAIN DIESEL ENGINE AUTOMATION - MAIN ENGINE of the Main Engine Automation System to the extent possible as per the OEM Manual:

PUENMATIC GOVERNOR UNIT

EMERGENCY MAIN ENGINE CONTROL UNIT

INDICATING PANEL, ME CONTROL RM

SAFETY SYSTEM UNIT

ME CONTROL PANEL, BRIDGE WINGS (PORT AND STBD) AND BRIDGE

UPS SYSTEM, AFT

Report any noteworthy findings or repairs against the associated equipment

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - MAIN DIESEL ENGINE Quarterly Maint 3 0 MONTHS AUTOMATION - MAIN DIESEL ENGINE AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - MAIN DIESEL ENGINE Main Engine Automation UPS Test

JOB TEXT: PERFORM MAINTENANCE IN ACCORDANCE WITH OEM INSTRUCTIONS.

Perform testing of ME automation UPS

Report any noteworthy findings or repairs against associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - PURIFIERS Bi-Monthly Maint 2 0 MONTHS AUTOMATION - PURIFIERS AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - PURIFIERS AUTOMATION – PURIFIERS of the Purifiers Automation as per the OEM Manual:

ALARM & MONITORING PANEL, FUEL OIL PURIFER, PURIFIER ROOM

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - SHIP'S SERVICE GENERATORS Bi-Monthly Maint 2 0 MONTHS AUTOMATION - SHIP'S SERVICE GENERATORS AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - SHIP'S SERVICE GENERATORS AUTOMATION - SHIPS SERVICE GENERATORS of the Vessel's power management System as per the OEM Manual:

AUTO/REMOTE START UNIT, GEN LOAD SHARING SYS, #1 GEN

AUTO/REMOTE START UNIT, GEN LOAD SHARING SYS, #2 GEN

AUTO/REMOTE START UNIT, GEN LOAD SHARING SYS, #3 GEN

AUTO/REMOTE START UNIT, GEN LOAD SHARING SYS, #4 GEN

AUTO/REMOTE START UNIT, GEN LOAD SHARING SYS, #5 GEN

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - SHIP'S SERVICE GENERATORS Five Year Maint 60 0 MONTHS AUTOMATION - SHIP'S SERVICE GENERATORS AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - SHIP'S SERVICE GENERATORS Automation, SSDG load sharing System

Job Text: Renew Battery in NOR Control #5 Generator Monitoring system as per OEM Manual:

SSDG #5

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUTOMATION - VESSEL MANAGEMENT SYSTEM Bi-Monthly Maint 2 0 MONTHS AUTOMATION - VESSEL MANAGEMENT SYSTEM AUTOMATION AND REMOTE CONTROL SYSTEMS; AUTOMATION - VESSEL MANAGEMENT SYSTEM AUTOMATION – VESSEL MANAGEMENT SYSTEM of the Automation System as per the OEM MANual:

ALARM/MONITORING SYSTEM AS PER AUTOMATION TEST PROCEDURES.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based AUXILIARY BOILER Bi-Monthly Maint 2 0 MONTHS AUXILIARY BOILER STEAM GENERATION AND DISTRIBUTION; AUXILIARY/WASTE HEAT BOILERS; AUXILIARY BOILER BOILER, AUXILIARY, OIL FIRED of the Auxiliary Oil Fired Boiler to the extent possible as per the OEM MANual:

SEAL AIR BLOWER AND MOTOR, F.O. BURNER AND PUMP, CONTROL PANEL

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based BEARING, INTERMEDIATE SHAFT, FWD 6000 Hour Service 0 6000 Hours BEARING, INTERMEDIATE SHAFT, FWD PROPULSION; LINE SHAFTING/BEARINGS/SEALS; INTERMEDIATE LINE SHAFT,FORWARD; BEARING, INTERMEDIATE SHAFT, FWD INTERMEDIATE SHAFT

Job Text: Carry out 6000 running hours maintenance as per instructions in the OEM instruction manual.

INTERMEDIATE SHAFT BEARINGS CHECK

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based BEARING, THRUST, MAIN SHAFT, CENT AFT 15000 Hour Service 0 15000 Hours BEARING, THRUST, MAIN SHAFT, CENT AFT PROPULSION; ENGINE, DIESEL, MN PROP, CENTERLINE; BEARING, THRUST, MAIN SHAFT, CENT AFT DIESEL ENGINE, MAIN PROPULSION

Job Text: Carry out 15000 running hours maintenance as per instructions in

THRUST BERING AND COLLAR CHECK

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based BILGE AND BALLAST SYSTEMS Bi-Monthly Maint 2 0 MONTHS BILGE AND BALLAST SYSTEMS FLUID HANDLING; BILGE AND BALLAST SYSTEMS BILGE/BILGE AND BALLAST/BALLAST SYSTEMS

OF THE BILGE/BILGE AND BALLAST/BALLAST SYSTEM AS PER OEM AND SHIP MANAGER'S FLEET INSTRUCTIONS:

EVAPORATOR, WASTE WATER, ENGINE CASING

PUMP, WASTE FLUID XFER, ENGINE CASING

VALVE, BILGE, G10 CARGO HOLD AFT STBD

VALVE, BILGE, G11 CARGO HOLD AFT PORT

VALVE, BILGE, G12 PIPE TUNNEL AFT STBD

VALVE, BILGE, G13 PIPE TUNNEL AFT PORT

VALVE, BILGE, G14 ENG RM AFT BILGE WELL

VALVE, BILGE, G2 PIPE TUNNEL FWD STBD

VALVE, BILGE, G3 PIPE TUNNEL FWD PORT

VALVE, BILGE, G4 CARGO HOLD FWD STBD

VALVE, BILGE, G5 CARGO HOLD FWD PORT

VALVE, BILGE, G6 CARGO HOLD MID FWD STBD

VALVE, BILGE, G7 CARGO HOLD MID FWD PORT

VALVE, BILGE, G8 CARGO HOLD MID AFT STBD

VALVE, BILGE, G9 CARGO HOLD MID AFT PORT

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

ALL PARTS AND MATERIALS ARE TO BE OWNER FURNISHED.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based BLOWER, AUXILARY, M/E, STARBOARD AFT 6000 Hour Service 0 6000 Hours BLOWER, AUXILARY, M/E, STARBOARD AFT PROPULSION; ENGINE, DIESEL, MN PROP, CENTERLINE; BLOWER, AUXILARY, M/E, STARBOARD AFT DIESEL ENGINE, MAIN PROPULSION

Job Text: Carry out 6000 running hours maintenance as per instructions in

AUXILIARY BLOWER OVERHAUL

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based BOW/STERN THRUSTERS Bi-Monthly Maint 2 0 MONTHS BOW/STERN THRUSTERS MOORING AND DOCKING; BOW/STERN THRUSTERS BOW/STERN THRUSTERS of the two Thrusters:

BOW THRUSTER:

PUMP, THRUSTER SERVO OIL

STERN THRUSTER:

PUMP, THRUSTER SERVO OIL

Check and clean the electric pump suction filter on the hydraulic system if requried.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CARGO GEAR HYDRAULIC SYSTEMS Bi-Monthly Maint 2 0 MONTHS CARGO GEAR HYDRAULIC SYSTEMS CARGO GEAR AND HANDLING; CARGO GEAR HYDRAULIC SYSTEMS Car Deck Hydraulic System

Job Text: Visually inspect and operationally test the following components of the Cargo Gear Car Deck Hydraulic Systems. Inspect the hydraulic oil for moisture content using "clear and bright". Purify with portable purifier or filter cart, if needed or indicated by oil sample analysis.

Car Deck Hydrualic System Pumps, PORT & STBD

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CARGO GEAR HYDRAULIC SYSTEMS Bi-Monthly Maint A 2 0 MONTHS CARGO GEAR HYDRAULIC SYSTEMS CARGO GEAR AND HANDLING; CARGO GEAR HYDRAULIC SYSTEMS Internal Doors and Ramps Hydrualic System of the internal doors and ramps hydraulic systems. Inspect the hydraulic oil for moisture content using "clear and bright". Purify with portable purifier or filter cart, if needed and as indicated from oil analysis.

INTERNAL DOOR/RAMPS HYDRAULIC SYSTEM

PUMPS, HYDRAULIC

REPORT ANY NOTEWORTHY FINDINGS OR REPAIRS AGAINST THE ASSOCIATED EQUIPMENT.

ALL PARTS AND MATERIALS ARE TO BE OWNER FURNISHED.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CARGO GEAR HYDRAULIC SYSTEMS Monthly Maint 1 0 MONTHS CARGO GEAR HYDRAULIC SYSTEMS CARGO GEAR AND HANDLING; CARGO GEAR HYDRAULIC SYSTEMS Stern Ramp Hydraulic System of the Stern Ramp Hydrauic Systems. Inspect the hydraulic oil for moisture content using "clear and bright". Purify with portable purifier or filter cart, if needed and as indicated by the oil analysis.

STERN RAMP HYDRAULICS

CONTROL SYSTEM STERN RAMP HYDRAULICS

COOLER

PUMPS, HYDRAUILIC 1 TO 6

PUMP, HYDRAULIC OIL COOLER CIRCULATING

PUMP, PILOT

WINCH AND BRAKES: W1 (PORT AND STBD), W2 (PORT AND STBD)

Report any noteworthy findings or repairs against the associated equipment.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CARGO HOLD SMOKE DETECTION Quarterly Maint 3 0 MONTHS CARGO HOLD SMOKE DETECTION SAFETY AND SECURITY; FIRE/SMOKE/CO DETECTION AND ALARM SYS; CARGO HOLD SMOKE DETECTION CARGO HOLD SMOKE DETECTION

Job Text: Perform the 3 month maintenance on the Kidde smoke detection system as per OEM manual:

Blow through pipe work Clean inner chamber Clean the lamp clean viewing window clean draught indicator clean front panel Clean PUmp housing drain holes Replace filter element, clean/replace as necessary

Report any noteworthy findings or repairs againist associated equipment.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CARGO VENTILATION SYSTEMS Bi-Monthly Maint 2 0 MONTHS CARGO VENTILATION SYSTEMS AIR HANDLING; CARGO VENTILATION SYSTEMS CARGO VENTILATION SYSTEMS

OF THE CARGO VENTILATION SYSTEM.

FANS, SUPPLY: 11S THROUGH 42S

FANS, SUP/EXH: 01SE THROUGH 44SE

FAN, DIRIVENT: D01 THROUGH D28

EMERGENCY SHUTDOWNS FOR ALL FANS

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CATHODIC PROTECTION SYSTEMS Monthly Maint 1 0 MONTHS CATHODIC PROTECTION SYSTEMS HULL AND STRUCTURE; CATHODIC PROTECTION SYSTEMS CATHODIC PROTECTION SYSTEMS

JOB TEXT: VISUALLY INSPECT AND CHECK FOR PROPER OPERATION THE FOLLOWING

COMPONENTS OF THE CATHODIC PROTECTION SYSTEM:

CATHODIC PROTECTION, CONSOLIDATED SPARES

CONTROLLER, ICCP SYSTEM,ENG RM,CTRL RM

POWER SUP, AFT ICCP, ENG RM

POWER SUP, FWD ICCP, ENG RM

LOG READINGS ON A REGULAR BASIS AND SUBMIT THE LOG FOR ANALYSIS TO

THE MANUFACTURER ON A MONTHLY BASIS.

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CLEANING UNIT, HYD OIL, CENT FORWARD Annual Maint 12 0 MONTHS CLEANING UNIT, HYD OIL, CENT FORWARD VESSEL SUPPORT; SPECIAL TOOLS; SEPARATOR, HYD OIL CLEAN, CENT FORWARD; CLEANING UNIT, HYD OIL, CENT FORWARD ALFA LAVAL EMMIE PURIFIER

JOB TEXT: PERFORM ANNUAL MAINTENANCE IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

RENEW O'RINGS

CHECK CONDITION OF DISK STACK, RENEW AS REQUIRED

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CLEANING UNIT, HYDRAULIC OIL, PORT AFT Annual Maint 12 0 MONTHS CLEANING UNIT, HYDRAULIC OIL, PORT AFT VESSEL SUPPORT; SPECIAL TOOLS; SEPARATOR, HYDRAULIC OIL CLEAN, PORT AFT; CLEANING UNIT, HYDRAULIC OIL, PORT AFT ALFA LAVAL EMMIE PURIFIER

JOB TEXT: PERFORM ANNUAL MAINTENANCE IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

RENEW O'RINGS

CHECK CONDITION OF DISK STACK, RENEW AS REQUIRED

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CO2 SYSTEM,LOW PRESSURE Annual Maint 12 0 MONTHS CO2 SYSTEM,LOW PRESSURE SAFETY AND SECURITY; CO2 FIRE EXTINGUISHING SYSTEMS; CO2 SYSTEM,LOW PRESSURE LOW PRESSURE CO2 SYSTEM

Job Text: Carry out 12 months maintenance as per instructions in the OEM instruction manual.

Check gauges and refrigeration system for proper operation.

Check the tank shutoff valve for leaks at the packing gland and that the worm and sector mechanism is not binding.

Check that the discharge valves and the emergency by-pass discharge valves open and close properly.

Check to see that the nozzles are not obstructed and the orifices on all nozzles are not clogged.

Check for proper operation of the 3-way pilot valves.

Check that pressure switches are operating properly.

Check for accuracy of predischarge and discharge timing of the automatic mechanical timer.

Check sounding of sirens.

Check alarms in protected spaces are labeled.

Check cable pulls are marked.

Check instructions are posted.

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based CO2 SYSTEM,LOW PRESSURE Monthly Maint 1 0 MONTHS CO2 SYSTEM,LOW PRESSURE SAFETY AND SECURITY; CO2 FIRE EXTINGUISHING SYSTEMS; CO2 SYSTEM,LOW PRESSURE LOW PRESSURE CO2 SYSTEMS

Job Text: Carry out 1 month maintenance as per instructions in the OEM instruction manual.

Check storage tank is free from heavy accumulation of dirt.

Check piping for deterioration.

Switch over the CO2 cooling plant compressors (operating to standby & standby to operating) and check for proper operation.

Check belt tension and oil level of refrigeration units.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Calendar-Based COMMISSARY/GALLEY/LAUNDRY/HOUSEKEEPING Bi-Monthly Maint 2 0 MONTHS COMMISSARY/GALLEY/LAUNDRY/HOUSEKEEPING HOTEL SERVICES; COMMISSARY/GALLEY/LAUNDRY/HOUSEKEEPING COMMISSARY / GALLEY / LAUNDRY / HOUSEKEEPING

JOB TEXT: VISUALLY INSPECT AND CHECK FOR PROPER OPERATION THE FOLLOWING COMPONENTS OF THE COMMISSARY / GALLEY / LAUNDRY:

VERIFY WITH STEWARD THAT EQUIPMENT HAS BEEN CHECKED AND IS WORKING PROPERLY. CHECK REFRIGERATION EQUIPMENT CONDENSERS, CLEAN AS REQUIRED

CHECK VENTS ON DRYERS AND CLEAN AS REQUIRED.

HOUSEKEEPING:

BOILER, WTR, ELECTRIC, OFFICER'S PANTRY

CHILLER, FOOD, OFFICER'S DINING SALON

COFFEE MAKER, CREW'S MESS ROOM

COMMISSARY, CONSOLIDATED

DISHWASHER, CREW'S PANTRY

DISHWASHER, OFFICER'S PANTRY

DISPENSER, JUICE, CREW'S MESS ROOM

DISPENSER, JUICE, OFFICER'S DINING SALON

DISPOSER, GARBAGE, GALLEY

CONTROLLER, GARBAGE DISPOSER, GALLEY

DRYERS, CLOTHES

DRYER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

DRYER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

DRYER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

DRYER,CLOTHES,8 DK,PORT AFT,OFF LAUNDRY

DYER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

FOOD PROCESSOR, GALLEY

FRYER, ELECTRIC FRYER, GALLEY

GRIDDLE, GALLEY

GRIDDLE/OVEN, 3 PLATE, GALLEY

GRIDDLE/OVEN, GALLEY

ICE MACHINE, PROVISION HANDLING SPACE

MICROWAVE, CREW MESS

MICROWAVE, GALLEY

MICROWAVE, OFFICER'S MESS NEW

MICROWAVE, OFFICER'S MESS OLD

MIXER, GALLEY

REFRIGERATOR, GALLEY

REFRIGERATOR, OFFICER'S MESS

REFRIGERATOR, OFFICER'S PANTRY

SLICER, MEAT, GALLEY

SLICER, MEAT, GALLEY

TOASTER, CREW MESS

TOASTER, OFFICER'S MESS

WARMER, FOOD, CREW'S PANTRY

WARMER, FOOD, GALLEY

WARMER, FOOD, OFFICER'S DINING SALON

WASHING MACHINES

WASHER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

WASHER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

WASHER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

WASHER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

WASHER,CLOTHES,5 DK,MIDSHIP,CREW LAUNDRY

WASHER,CLOTHES,8 DK,PORT AFT,OFF LAUNDRY

WASHER,CLOTHES,8 DK,PORT AFT,OFF LAUNDRY

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR AIR, UNIT MACHINE SHOP 2000 Hour Service 0 2000 Hours COMPRESSOR AIR, UNIT MACHINE SHOP AIR HANDLING; SHIP'S SERVICE COMPRESSED AIR SYSTEMS; COMPRESSOR AIR, UNIT MACHINE SHOP COMPRESSOR, DECK AIR, SULLAIR

Job Text: Carry out 12 MONTH (approx 2,000 hrs) maintenance as per instructions in

Replace Separator element.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, AUX AIR 1500 Hour Service 0 1500 Hours COMPRESSOR, AUX AIR AIR HANDLING; SHIP'S SERVICE COMPRESSED AIR SYSTEMS; COMPRESSOR, AUX AIR Job Text: Carry out 1500 running hours maintenance as per instructions in

Remove tube nest and clean inter/after coolers

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, AUX AIR 50 Hour service 0 50 Hours COMPRESSOR, AUX AIR AIR HANDLING; SHIP'S SERVICE COMPRESSED AIR SYSTEMS; COMPRESSOR, AUX AIR CMPRSR, STARTING AIR

Job Text: Carry out 50 running hours maintenance as per instructions in

Clean Air filter

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, AUX AIR 500 Hour Service 0 500 Hours COMPRESSOR, AUX AIR AIR HANDLING; SHIP'S SERVICE COMPRESSED AIR SYSTEMS; COMPRESSOR, AUX AIR COMPRESSOR, STARTING AIR

Job Text: Carry out 500 running hours maintenance as per instructions in

Check Air Valves

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, DECK AIR DK4 PORT 2000 Hour Service 0 2000 Hours COMPRESSOR, DECK AIR DK4 PORT AIR HANDLING; SHIP'S SERVICE COMPRESSED AIR SYSTEMS; COMPRESSOR, DECK AIR DK4 PORT COMPRESSOR, DECK AIR, SULLAIR

Job Text: Carry out 12 MONTH (approx 2,000 hrs) maintenance as per instructions in

Replace Separator element.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, EMER START AIR STBD GEN FLAT 250 Hour Service 0 250 Hours COMPRESSOR, EMER START AIR STBD GEN FLAT AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, EMER START AIR STBD GEN FLAT Emergency Air Compressor

Job Text: Perform 250 hour maintenance on emergency air compressor as per OEM manual

Change Oil

Report any noteworthy findings or repairs againist associated equipment.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, LP CO2 REEFER NO #1 CO2 RM 2000 Hour Service 0 2000 Hours COMPRESSOR, LP CO2 REEFER NO #1 CO2 RM SAFETY AND SECURITY; CO2 FIRE EXTINGUISHING SYSTEMS; CO2 SYSTEM,LOW PRESSURE; COMPRESSOR, LP CO2 REEFER NO #1 CO2 RM SHIP'S SERVICE REEFER COMPRESSORS

JOB TEXT: CARRY OUT 2000HR/6 MONTH MAINTENANCE FOLLOWING INSTRUCTIONS IN THE OEM INSTRUCTION MANUAL.

CHANGE OIL

CHANGE FILTER

INSPECT/CLEAN SUMP

CLEAN OIL SUCTION SCREEN

TEST LOW OIL PRESS SWITCH

TEst Reefer Efficiency

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, LP CO2, REEFER #2 CO2 RM 2000 Hour Service 0 2000 Hours COMPRESSOR, LP CO2, REEFER #2 CO2 RM SAFETY AND SECURITY; CO2 FIRE EXTINGUISHING SYSTEMS; CO2 SYSTEM,LOW PRESSURE; COMPRESSOR, LP CO2, REEFER #2 CO2 RM SHIP'S SERVICE REEFER COMPRESSORS

JOB TEXT: CARRY OUT 2000HR/6 MONTH MAINTENANCE FOLLOWING INSTRUCTIONS IN THE OEM INSTRUCTION MANUAL.

CHANGE OIL

CHANGE FILTER

INSPECT/CLEAN SUMP

CLEAN OIL SUCTION SCREEN

TEST LOW OIL PRESS SWITCH

TEst Reefer Efficiency

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR INBD 1500 Hour Service 0 1500 Hours COMPRESSOR, MAIN AIR INBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR INBD Job Text: Carry out 1500 running hours maintenance as per instructions in

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR INBD 50 Hour service 0 50 Hours COMPRESSOR, MAIN AIR INBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR INBD CMPRSR, STARTING AIR

Clean Air filter

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR INBD 500 Hour Service 0 500 Hours COMPRESSOR, MAIN AIR INBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR INBD COMPRESSOR, STARTING AIR

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR OUTBD 1500 Hour Service 0 1500 Hours COMPRESSOR, MAIN AIR OUTBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR OUTBD Job Text: Carry out 1500 running hours maintenance as per instructions in

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR OUTBD 50 Hour service 0 50 Hours COMPRESSOR, MAIN AIR OUTBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR OUTBD CMPRSR, STARTING AIR

Clean Air filter

Report any noteworthy findings or repairs againist associated equipment.

All parts and materials are to be owner furnished.

Note: Personnel must observe safety precautions and adhere to the standard operating procedures for individual machinery/equipment/system operations (i.e. proper fluid levels, valve alignment, etc.). Inspect before operating equipment to insure that equipment is in good working condition and that all installed or attached safety features (i.e. guards, limit switches, etc.) are in place and in good working order. Insure that no one or no other interference is in a position to be injured or damaged when machinery/equipment/system is being operated.

CAPE HENRY EQUIPMENT Counter-Based COMPRESSOR, MAIN AIR OUTBD 500 Hour Service 0 500 Hours COMPRESSOR, MAIN AIR OUTBD AIR HANDLING; STARTING AIR SYSTEMS; COMPRESSOR, MAIN AIR OUTBD COMPRESSOR,…