D3_DMES_60X60X15_ASSEMBLY__REV_D.pdf
PDF 660 KB Posted
- Attached to
- PLATFORM FABRICATION SERVICES FOR NOAA Federal contract opportunity
- Solicitation number
- 1305M226Q0094
About this file
This document is a technical assembly drawing for a DMES (Data Management and Exchange System) 60x60x15 structural component produced by NOAA/NOS/CO-OPS. The assembly consists of a frame structure with an approximately 237-pound total weight, designed to house a 60x60x15 APX enclosure. The drawing package includes three sheets: a cover sheet (CS-01), an enclosure frame assembly detail (AS-01), and an item list (G-01).
The assembly comprises 19 components including one DMES frame, three enclosure clamps, one spacer, two enclosure bolt-down bars, and one 60x60x15 APX enclosure, along with various fasteners and hardware. Key materials specified include stainless steel 316 (SS316) for corrosion resistance in threaded rods, nuts, washers, and split washers; 6061-T6 aluminum for conduit piping; and Delrin for washers. Revision D, dated October 22, 2022, widened the DMES base, modified fillet weld sizes to accommodate the enclosure fit between uprights, added a spacer to prevent frame bending during assembly, and eliminated an unnecessary mounting hole pattern. Installation requires anchoring legs using 3/4-10UNC SS316 anchors with embedment specifications on a separate installation drawing. The point of contact for design verification is NOAA in Silver Spring, Maryland at (240) 533-0494.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| D5_11_Inch_Fixed_Arm_-_Straight_Flanges_v5.pdf | ||
| D10_GEODETIC_LEVELLING_COLLAR_FOR_MICROWAVE_WATER_LEVEL_SENSOR__REV_D.pdf | ||
| Contractor_Past_Performance_Reference_Sheet.pdf | ||
| D6_MET_3_BINDER.pdf | ||
| D2_DMES_60X60X15__REV_D.pdf | ||
| D8_SADDLE_48_BINDER.pdf | ||
| D9_SHAKESPEARE_LIGHT_POLE_DOUBLE_ANEMOMETER_MASTHEAD__REV_C.pdf | ||
| D7_STANDARD_BUBBLER_ORIFICE__REV_A.pdf | ||
| Sol_1305M226Q0094.pdf | ||
| D4_DMES_SDME_SOLAR_RACK_ASSEMBLY_-_BINDER.pdf | ||
| D1_8775870_Bob_Hall_Pier_7_5__PLATFORM_v15.pdf |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAWING INDEX
SHEET DWG NO TITLE
1 CS-01 COVER SHEET
2 AS-01 ENCLOSURE FRAME ASSEMBLY
3 G-01 ITEM LIST
REVISION DESCRIPTION
REV DESCRIPTION
D DMES BASE WAS WIDENED AND FILLET WELD SIZE IN CORNER CHANGED DUE TO ISSUES WITH 60X60X15 APX ENCLOSURE NOT FITTING BETWEEN UPRGIHTS. A SPACER WAS ADDED TO PREVENT THE UPPER ENCLOSURE FRAME HORIZONTAL SUPPORT FROM BENDING DURING ASSEMBLY. MOUNTING HOLE PATTERN 1 WAS ELIMINATED FOR BEING UNNECESSARY.
DESIGN BY BLS 03/10
DRAWN BY BLS 06/14
APPROVED BY --- MM/YY
REVISION BY CCE 10/22 NOAA / NOS / CO-OPS
REVISION
PROJECT STATUS
DMES_60X60X15 ASSEMBLY
Components
STATION STRUCTURAL COMPONENTS
D
PRODUCTION CS-01 1/3
COVER SHEET
ISO OVERVIEW
DMES ASSEMBLY
SEE SH AS-01 FOR DETAILS
SEE GENERAL NOTES 1-6
GENERAL NOTES
1. THIS DRAWING SUPPLEMENTS THE 'DMES_60X60X15 ASSEMBLY, REV D.STEP' FILE.
2. THIS ASSEMBLY SUPPLEMENTS THE FABRICATION DRAWING 'DMES_60X60X15, REV D'.
3. THIS ASSEMBLY APPROX WEIGHT IS: 237 LBS.
4. ALL DIMENSIONS ARE IN INCHES AND FEET UNLESS OTHERWISE STATED.
5. ABBREVIATIONS USED IN THIS DRAWING ARE AS FOLLOWS:
(N) = NEW (E) = EXISTING SH = SHEET GEN = GENERAL
TYP = TYPICAL EA = EACH ABV = ABOVE PL = PLACES
REF = REFERENCE
6. POC: (240) 533-0494, NOAA, SILVER SPRING, MD
DO NOT SCALE DRAWING
DRAWING SIZE ANSI A NOAA / NOS / CO-OPS
REVISION
PROJECT STATUS
DMES_60X60X15 ASSEMBLY
Components
STATION STRUCTURAL COMPONENTS
D
PRODUCTION AS-01 2/3
ENCLOSURE FRAME
ASSEMBLY
A A
(65.75 REF)
(20.25 REF)
SHEET NOTES
1. ENCLOSURE CLAMPS ARE ATTACHED AFTER THE ENCLOSURE IS BOLTED OT THE
ENCLOSURE FRAME BASE. SEE ISOMETRIC VIEW FOR DETAILS.
2. LEGS ARE TO BE ANCHORED USING 3/4-10UNC SS316 ANCHORS. EMBEDMENT SHLL BE
SPECIFIED ON INSTALLATION DRAWING.
3. INSTALLATION DRAWING REFERS TO A SEPARATE DRAWING THAT CALLS FOR THIS
ASSEMBLY TO BE INSTALLED.
4. CONTACT DDET PRIOR TO USING THIS DESIGN SO DESIGN CRITERIA CAN BE VERIFIED.
(82.4 REF)
(2 PL)
(3, 2 PL)
(6, 2 PL)
(3, 2 PL)
(3, 2 PL)
(3, 2 PL)
(4, 2 PL)
(4, 2 PL)
(4, 2 PL)
(2, 2 PL)
(2 PL)
(2 PL)
(3 PL)
(3 PL)
(6 PL)
(2, 6 PL)
ISOMETRIC VIEW
DMES ASSEMBLY
SEE SHEET NOTES 1-4
FRONT VIEW
DMES ASSEMBLY
SEE SHEET NOTES 1-4
SECTION A-A
ENCLOSURE INTERNAL BOLT DOWN
SEE SHEET NOTE 1
THREADED END ON
BOTTOM, USE
LIQUIDTIGHT TO
CONNECT TO
ENCLOSURE (ITEM 5)
B
B
SECTION B-B
SPACER INSTALL
(2, 3PL)
(3 PL)
(INSTALL PRIOR TO
TIGHTENING DOWN ITEM 2)
USE EPOXY TO ATTACH
1/8 THICK BEARING PAD
TO THESE SURFACES ON THE
INSIDE AREA OF CLAMP THAT
MATES TO ENCLOSURE TOP
ITEM LIST
ITEM QTY DESCRIPTION REMARKS
1 1 DMES FRAME SEE DRAWING 'DMES_60X60X15, REV D' ITEM 1 FOR
DETAILS
2 3 ENCLOSURE CLAMP SEE DRAWING 'DMES_60X60X15, REV D' ITEM 2 FOR
DETAILS
3 1 SPACER SEE DRAWING 'DMES_60X60X15, REV D' ITEM 3 FOR
DETAILS
4 2 ENCLOSURE BOLT DOWN BAR SEE DRAWING 'DMES_60X60X15, REV D' ITEM 4 FOR
DETAILS
5 1 60X60X15 APX ENCLOSURE -
6 3 1/2-13UNC X 18 LG, THREADED ROD, SS316 -
7 9 1/2 WASHER, SS316 -
8 18 1/2-13UNC NUT, SS316 -
9 6 3/4-10UNC X 2-1/2 LG, FULLY THREADED HEX HD SCREW,
SS316 -
10 12 3/4 WASHER, SS316 -
11 6 3/4 WASHER, 2" OD, DELRIN -
12 6 3/4 SPLIT WASHER, SS316 -
13 6 3/4-10UNC NUT, SS316 -
14 2 1-1/2 NPS SCH 80, 10' LG, THREADED ONE END, 6061-T6 AL -
15 2 WEATHERHEAD, 1-1/2 CONDUIT SIZE, AL -
16 4 U-BOLT, 3/8-16UNC THREAD X 2 ID, SS316 -
17 8 3/8 WASHER, SS316 -
18 8 3/8 SPLIT WASHER, SS316 -
19 8 3/8-16UNC NUT, SS316 -
NOAA / NOS / CO-OPS
REVISION
PROJECT STATUS
DMES_60X60X15 ASSEMBLY
Components
STATION STRUCTURAL COMPONENTS
D
PRODUCTION G-01 3/3
ITEM LIST
File details come from the government source that posted it. Updated .