CUTSHEETS_PACKAGE.pdf

Intelligent System Controller

LNL-3300

Overview

The LNL-3300 Intelligent System Controller (ISC) by Lenel is designed for advanced access control applications. As the access control engine for the OnGuard® system, the ISC provides power and functionality.

The ISC can communicate to the host computer in a single- or dual-path configuration of Ethernet, dial-up or direct connect RS-485 communication. Multiple combinations of Input Control Modules, Output

Control Modules and Card Reader Interface Modules (up to 64 devices) can be configured.

Utilizing its native Ethernet communications and an advanced 32-bit processor, the LNL-3300 can communicate upstream to the host computer through its primary Ethernet port, with throughput up to 8 times greater than the fastest serial connections. The secondary port can communicate at up to 115.2 Kbps using 2-wire RS-485 multidrop, dial-up, or an Ethernet daughterboard connection.

The LNL-3300 can store up to 500,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The two downstream RS-485 2-wire ports can be used to connect up to 64 devices (64 doors) in many combinations of LNL-1100, LNL-1200, LNL-1300, LNL-1320, LNL-500B, and LNL-500W modules.

FEATURES & FUNCTIONALITY

• On-board high-speed Ethernet 10/100Base-T upstream port provides up to 8 times higher throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported.

• DNS device naming through DHCP extended commands

• Host dual path communication enabled - on-board Ethernet TCP/IP, direct wire (RS-485, 2-wire multidrop capable), or dial-up communications

• 15 MB of available on-board, non-volatile flash memory

• Battery-backed, non-volatile storage of 50,000 events

• Firmware stored in flash memory, background download of firmware updates supported

• 12 or 24 VDC input power

• Supports up to 16 different formats (8 card formats and 8 asset formats)

• Biometric template storage support for Schlage Recognition Systems®, Bioscrypt®,and Identix®

• Enhanced anti-passback capabilities

• Up to 32,000 access level permissions

• 255 holidays with grouping

• 255 timezones, each with 6 intervals

• Elevator control support for up to 128 floors

• Alarm masking

• Individual extended held open and strike times (ADA required)

• Up to 9-digit user PIN codes

• Status LEDs for heartbeat & battery status, upstream and downstream communication, and memory write status

• Two dedicated inputs for tamper and power failure status

• Advanced Encryption Standard (AES) 128-bit algorithm for communications

(866) 788-5095

Specifications subject to change without notice.

© 2013 Lenel Systems International, Inc. All rights reserved. All other trademarks and copyrights are the property of their respective owners.

LNL_TS_3300_102813

lenel.com

Controller Features

LNL-3300 15 MB On-board flash memory available for cardholder & asset database

50,000 event battery backed RAM for event log

Secondary Host Communications

LNL-ETHLAN Micro serial server, flash ROM, DB25 serial port RJ-45 (10/100Base-T)

LNL-ETHLAN-MICR CoBox Micro serial server, flash ROM, RJ-45 (10/100Base-T), diagnostic LEDs, dimensions 1.6 x 1.9 in. (40 x 49 mm), internally powered and includes standoffs

Dial-Up Modem

LNL-56KEXT 56 K external modem with cables

LNL-DC336K 12 VDC-powered/33.6 K external modem for Intelligent System Controller

Specifications

Primary Power (DC or AC) * The LNL-3300 is for use in low voltage, power-limited, class 2 circuits only.

DC input: 12 or 24 VDC ± 15%. 500 mA maximum

AC input: 12 VAC ± 15%. 400 mA RMS

Memory and Clock backup 3 V lithium, type BR2325, BR2330, CR2330

Communication Ports

Primary (Ethernet) Port 0: 10/100Base-T Ethernet high-speed port

Secondary Upstream Port 1:

RS-485 (2-wire) or RS-232 9600 to 115.2 Kbps async, optional Ethernet serial server

Downstream Ports 2-3: RS-485 (2-wire) 9600 to 38.4 Kbps async

Inputs

Cabinet Tamper Monitor: Unsupervised, dedicated

Power Fault Monitor: Unsupervised, dedicated

Wire Requirements

Power: 1 twisted pair, 18 AWG

RS-485: 24 AWG twisted pair(s) with shield, 4000 ft.

(1219 m) maximum

RS-232: 24 AWG, 25 ft. (7.6 m) maximum

Inputs: Twisted pair, 30 ohms maximum

Environmental

Temperature: Operating: 32° to 158° F (0° to +70° C)

Storage: -67° to 185° F (-55° to +85° C)

Humidity: 0 to 95% RHNC

Mechanical

Dimensions: 5 x 6 x 1 in. (127 x 152.4 x 25 mm)

Weight: 4 oz. (115 g) nominal

Approvals FCC Part 15, CE, RoHS, UL 294, UL 294, UL

1076, ULC CSA-C22.2, CAN/ULC-S319-05,

cUL/ORD-C1076

LNL-1300

Single Reader Interface Module

LNL-1100

Input Control Module Up to 16 Inputs per

LNL-1100

Motion Sensor Alarm

LNL-1200

Output Control Module Up to 16 Outputs per

LNL-1200

RS-485 Multi-drop up to 4000 ft.

ReaderReaderReader

LNL-3300

Intelligent System Controller (ISC) Max 64 Devices

TC

P

/I P

N E

TW

O

R K

OnGuard Security Server

Option 2.1

-OR-

Reader Reader

Option 2.2

Reader Reader

LNL-1320

Dual Reader Interface Module

Max 32 Max 32

July 2022 1/2 www.lifesafetypower.com

HID 16DR

PROWIRE ®

Overview These ProWire Unified Power wall mount models are single and dual voltage access power systems, precision wired for HID controllers. ProWire enables the specifi-cation and installation of standardized access power equipment across an enterprise for uniform operation, maintenance and servicing.

The C8 or M8 control modules provide sixteen access control inputs capable of voltage or dry contact activation, and sixteen outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the power supply fire alarm interface. The D8 modules provide sixteen auxiliary outputs. In dual voltage systems, each output is configurable for 12 or 24VDC operation.

ProWire Unified Power enclosures are painted steel with removable backplate, lock, keys and and tamper switch and come 100% factory tested – ready for final panel installation and field wire termination.

faults and tamper switch

Model Nomenclature

*Base Model Number Tie Wrap Wiring Panduit Wiring System Type Distributed Outputs Enclosure / Cable Mgmt

T16-A T16-B P16-A P16-B STD / NET Auxiliary and Control H x W x D (inches)

Dual voltage - 12A/12V and 10A/24V

FPO150/250 – 2C83D8E6V1 / T16-A T16-B P16-A P16-B Standard 16 auxiliary, 16 lock control E6V1 30 x 23 x 6.5

Tie Wrap / PanduitFPO150/250 – 3D82M8NL4E6V1 / T16-A T16-B P16-A P16-B Networked 16 auxiliary, 16 managed

FPO150/250 – 2C83D8E8V / T16-A T16-B P16-A P16-B Standard 16 auxiliary, 16 lock control E8V 36 x 30 x 6.5

Tie Wrap / PanduitFPO150/250 – 3D82M8NL4E8V / T16-A T16-B P16-A P16-B Networked 16 auxiliary, 16 managed

Single voltage - 20A/12V (10A/24V)

FPO250 – 2C83D8E4V1 / T16-A T16-B Standard 16 auxiliary, 16 lock control E4V1 24 x 20 x 6.5

Tie WrapFPO250 – 3D82M8NL4E4V1 / T16-A T16-B Networked 16 auxiliary, 16 managed

FPO250 – 2C83D8E6V1 / T16-A T16-B P16-A P16-B Standard 16 auxiliary, 16 lock control E6V1 30 x 23 x 6.5

Tie Wrap / PanduitFPO250 – 3D82M8NL4E6V1 / T16-A T16-B P16-A P16-B Networked 16 auxiliary, 16 managed

FPO250 – 2C83D8E8V / T16-A T16-B P16-A P16-B Standard 16 auxiliary, 16 lock control E8V 36 x 30 x 6.5

Tie Wrap / PanduitFPO250 – 3D82M8NL4E8V / T16-A T16-B P16-A P16-B Networked 16 auxiliary, 16 managed

*Complete model number requires base and wiring suffix, i.e, FPO150/250-2C83D8E8V / P16-A

P Panduit 16DR T Tie Wrap 16DR

Power Supplies Accessory Boards & Enclosure Wiring Option

FPO150/250

Enclosure Accessory qty Accessories C8, D8P, M8

2C8 3D8P E8V P16-A/– Power rating FPO150 12A/12V 150W system power FPO250 10A/24V 250W lock power A V1000 / V100

B all V100’s B

A V1000 V100+

All V100’s

E8V

E6V1 E4V1

July 2022 2/2 www.lifesafetypower.com

LSP PROWIRE | HID 16DR

LifeSafety Power warrants to the original purchaser only that all products will be free from defects in material or workmanship at time of shipment. This warranty is non-transferable. Our obligation under this warranty is limited to repair or replacement, at the sole discretion of LifeSafety Power, of products that are defective in material or workmanship at the time of shipment provided they were used within the specified ratings and installed in accordance with accepted engineering practices.

Products in the Unified Wired Systems Classification will be wired to the LifeSafety Power description of operation unless otherwise stated. At the time of installation it is the obligation of the purchaser or final installer to verify that all wired terminations provide the desired operation. In no event shall LifeSafety Power be responsible for any special, incidental or consequential damages even if LifeSafety Power has been advised of the possibility of such damages. Customer hereby agrees to indemnify LifeSafety Power for and hold LifeSafety Power harmless from and against any and all loss, cost or expense (including reasonable attorneys’ fees) directly or indirectly related to any claim with respect to Unified Wired™ systems classification products except to the extent any such claim shall result from the gross negligence or willful misconduct of LifeSafety Power.

LifeSafety Power LLC 10027 S. 51st Street, Suite 102 Phoenix, AZ 85044 USA www.lifesafetypower.com Phone (888) 577-2898 info1@lifesafetypower.com

System Specifications Power Supplies FPO150 Power supply board 12A/12V, 150W

FPO250 Power supply board 10A/24V, 250W

Input 120/230VAC 50/60Hz | Single voltage 142 Watts (1.42A) | Dual voltage 452 Watts (3.77A) Overload and short circuit protection Over temperature protection Polarized AC power supply disconnect

Battery Charging Independent built-in charger for sealed lead-acid or gel type batteries Microprocessor dual rate charging of 12 or 24V battery sets Automatic switchover to standby battery when AC fails Zero voltage drop when switched over to battery backup

Supervision AC Fault (form "C" contacts) System Fault (form "C" contacts) System Fault conditions: Low or no battery | short to earth ground | power supply failure

Distribution Modules D8 (X3) 16 auxiliary outputs, fused at 3A per output (third D8 dedicated power to HID controllers)

C8 (X2) 16 relay lock control outputs, fused at 3A per output

M8 (X2) 16 relay managed outputs, fused at 3A per output

Network Management NL4 Four port module. Monitors and reports power supply status. Tests and reports battery health status.

M8 (X2) Monitors sixteen (16) individual outputs. Remote reset each output. Set window thresholds for voltage & current.

Enclosures E4V1 Size: 24.00H x 20.00W x 6.50D in. (61.00 x 50.00 x 16.51 cm) | Weight: 28 lbs.

E6V1 Size: 30.00H x 23.00W x 6.50D in. (76.20 x 58.12 x 16.51 cm) | Weight: 47 lbs.

E8V Size: 36.00H x 30.00W x 6.50D in. (91.44 x 76.20 x 16.51 cm) | Weight: 70 lbs.

Wiring Suffix T16-A | P16-A T = Tie Wrap P = Panduit 16 = Door count A = V1000 / V100

T16-B | P16-B T = Tie Wrap P = Panduit 16 = Door count B = All V100's

Regulatory Compliance UL / ULC UL294, ULC S319

CSA / FCC CSA C22.2 #107.1 | FCC Part 15, CSFM

Board Locations / Wiring Examples

E4V1 E6V1 E8V

BA

V1000 V100+ All V100’s

LNL-R10330-05TB

LenelS2 BlueDiamond Mobile Ready Readers - Mini-Mullion Reader- Multi-Tech

Details

Reader is ready to support LenelS2 BlueDiamond™ Mobile Credentials via Bluetooth 4.0 low-energy

Multi-tech models offer simultaneous support for: 125kHz proximity cards

& 13.56MHz smart cards

125kHz proximity cards : - HID® Proximity - AWID® Proximity - CASI/GE

Security ProxLite

13.56MHz smart cards : - Mifare® DESFIRE EV1/EV2/EV3 • Support for key diversification based on NXP standard • Support for NFC wallet-based credentials - Mifare Classic - ISO 14443, or secure sector data -

Vicinity Card Serial Number - ISO 15693 - HID® iClass Classic or

Standard, not Elite Key, SE or SEOS

Wiegand or SIA OSDP with or without secure channel encryption, auto-configuring with LenelS2 access panels

Mini-mullion format

Fingerprint-resistant black textured finish

Optical tamper switch

Red/Green/Blue LED

Read range up to 10cm (4 inches) for RFID cards, up to 9 meter (30 ft) for Bluetooth

The BlueDiamond mobile app is available for iOS® and Android® devices, as well as the Apple Watch®.

5-year limited warranty

Overview

The BlueDiamond™ platform offers a complete, next-generation access control experience. With multi-technology readers, a feature-rich mobile app and the ability to support mobile and physical credentials, organizations can upgrade to the BlueDiamond experience at their own pace.

BlueDiamond multi-technology readers are among the most versatile access control readers on the market, work seamlessly with existing infrastructures and leverage open credentialing standards. The readers are non-proprietary, access control platform agnostic and support standard output protocols including Supervised F/2F (SF/2F), Wiegand, OSDP™ and OSDP V2. When utilizing LenelS2 OnGuard®, NetBox™, and Elements™ access control systems, users can conveniently manage mobile credentials through a single system.

Supported technologies

Simultaneous support for a wide range of smart cards – including

HID® iCLASS®, MIFARE® and DESFire® EV1, EV2 and EV3 – in addition to support for standard proximity cards means BlueDiamond multi-tech readers provide a seamless migration path from less secure card technologies to a more secure, open standard with DESFire EV1, EV2 and EV3 card technology and BlueDiamond mobile credentials.

With both mobile-ready and mobile-enabled versions available within the BlueDiamond multi-tech reader portfolio, organizations can achieve enhanced security at their own pace. For organizations that are not ready for mobile credentialing, but want to have the flexibility to add it in the future, the BlueDiamond mobile-ready readers provide flexibility without the need to replace or add hardware. Mobile credentialing can be enabled within these readers through the purchase of a license. The BlueDiamond mobile-enabled readers are ready out of the box to support mobile credentials.

Mobile-ready readers can be upgraded to read mobile credentials through the purchase of a license without the need to add or replace hardware.

Mobile-ready readers come with the Bluetooth radio disabled and requires the BDC-UNLOCK and BDC-BLUETOOTH configuration cards to enable (sold separately).

Mobile-enabled readers support mobile credentials out of the box.

Firmware updates, custom key loading and configuration changes via

OSDP file transfer when BlueDiamond multi-tech readers are paired with the OnGuard access control system version 7.5 or greater, Mercury xSeries Controllers and Mercury Series 3 i/o boards.

Wiegand, SF/2F or OSDP with or without secure channel encryption, auto-configuring with LenelS2™ access panels.

LNL-R10330-05TB

LenelS2 BlueDiamond Mobile Ready Readers - Mini-Mullion Reader- Multi-Tech

Technical specifications

System Reading distance RFID cards 10 cm, Bluetooth 9 m CSN (Card Serial Number)

Yes

Custom data model Yes Vicinity type ISO15693 No. of LEDs 4 No. of covers included 1 RTE (Request To Exit) Yes (only in SF/2F mode)

Technology Reader type Multi-frequency Reader operating-transmitting frequency

125 KHz, 13.56 MHz

Supported technology

13.56 MHz

iCLASS (CSN), MIFARE Classic (CSN), MIFARE DESFire EV1 (CSN), MIFARE DESFire EV1 (custom data), Mifare DESFire EV2 (CSN), Mifare DESFire EV2 (custom data), MIFARE DESFire EV3 (CSN), MIFARE DESFire EV3 (custom data), Vicinity –

ISO 15693 (CSN)

Supported technology 125 kHz

AWID Prox, GE ProxLite/CASI Prox, HID Prox

Supported technology

2.4 GHz

Mobile ready

Mifare type ISO14443A No. of Mifare bytes CSN 4 Bytes (non-unique), 4 Bytes (S50), 7 Bytes

(S50), 7 Bytes (S70) Read write Yes SAM module embedded No

Interface & connections Interface Clock-data, OSDP V1, OSDP V2 Secure Channel, SF2F, Wiegand Connector type Terminal Strip

Tamper type Pry-off tamper No Opening tamper Yes

Operation Stand-alone Yes PIN keypad No

Electrical Power supply type VDC Power supply value 10 to 16 VDC Current consumption 35 mA @ 12 VDC (average)

67 mA @ 12 VDC (peak) Data Voltage Rest >4VDC / Active <1VDC Indication 1 RGB LED Sounder Integral speaker

Physical Physical dimensions 96 x 52 x 21 mm

3.8 x 2.1 x 0.8 in.

Net weight 91 g Shipping weight 113 g Colour Black Material Polycarbonate / ABS Form factor Mini-Mullion Mounting type Surface mount

Environmental Environment Outdoor Operating temperature -35 to +65°C

-31 to +149°F Storage temperature -35 to +65°C

-31 to +149°F Relative humidity 0 to 100% noncondensing IP rating IP 65

Regulatory Compliancy CE, FCC, RoHS, UL 294, WEEE

LenelS2 BlueDiamond Mobile Ready Readers - Mini- Mullion Reader- Multi-Tech LNL-R11030-85TB LenelS2 BlueDiamond Mobile readers - Bluetooth

In-Line add-on reader- Mini-Mullion LNL-R11320-05TB LenelS2 BlueDiamond Mobile Enabled Readers -

US Single Gang Reader- Multi-Tech LNL-R11325-05TB LenelS2 BlueDiamond Mobile Enabled Readers -

US Single Gang Reader- Multi-Tech with keypad LNL-R11330-05TB LenelS2 BlueDiamond Mobile Enabled Readers -

Mini-Mullion Reader- Multi-Tech LNL-R10320-05TB LenelS2 BlueDiamond - Mobile Ready Readers, Multi-Tech US Single Gang LNL-R10325-05TB LenelS2 BlueDiamond Mobile Ready Readers -

US Single Gang Reader- Multi-Tech with keypad LNL-R10330-05TB LenelS2 BlueDiamond Mobile Ready Readers -

Mini-Mullion Reader- Multi-Tech BD-SPACER Spacer for the mini-mullion BlueDiamond reader

LNL-R1x330-05TB

The latest product specifications can be located at www.lenels2.com or by contacting your sales representative.

LenelS2 reserves the right to change product specifications without prior notice.

Last updated on 29 March 2024 - 11:32

Powered by TCPDF (www.tcpdf.org) http://www.tcpdf.org

98/99 Series Exit device – push bar

Features and benefits

� Built-in flexibility with a universal center case that provides migration path to new technology

� Highly modular allowing product upgrades to meet customer’s changing needs

� Easy maintenance with extensive serviceable parts options

Overview

The 98/99 Series have all been certified to the highest industry standards and are Von Duprin’s most premium offering. The 98/99 Series are high‑performance, wide stile heavy-duty exit devices featuring push pads that offer many customizable options.

K-12 schools

Vertical markets

Commercial real estate

Government

MultifamilyHealthcare

Hospitality

Higher education

Traffic and duty

Traffic

Duty

K-12 schools

Vertical markets

Commercial real estate

Government

MultifamilyHealthcare

Hospitality

Higher education

Traffic and duty Stile width

Traffic

Duty

Wide

About Allegion

Allegion (NYSE: ALLE) is a global pioneer in seamless access. We keep people and their assets safe, wherever they are, bringing together simple solutions, convenient access and advanced technology.

For more, visit www.allegion.com © 2022 Allegion

015556, 09/22 www.allegion.com/us

Device types Options

� Classroom security

� Dogging

� Switches

� Latch retraction

� Delayed egress

� Environmental

� Weatherized options

Finish options

Rim Single three-point latch device

Surface vertical rod

Concealed vertical rod

Mortise

Trim options

A variety of exit trim types and functions are available.

Several versions of compatible trim models listed below.

996990696 697

374 376

VR910

(no trim)

392-7

Certifications

� ANSI/BHMA A156.3 2014 Grade 1 certified

� ANSI/UL 10C (fire-rated only)

� ANSI/UL 305

� CAN/ULC-S104 (fire-rated only)

� CAN/ULC-S132

Bright Brass

Satin Brass

Satin Bronze

Satin Bronze, Oil-Rubbed

Satin Nickel

Polished Chrome

626/626AM

Satin Chrome

Anodized Aluminum

630/630AM

Satin Stainless Steel

643e Aged Bronze

Dark Bronze

Black

*611 Bright bronze finish available as a special option AM = Antimicrobial

Concealed vertical cable

Looking for more details?

Scan the QR code to learn more about the 98/99 Series push pad exit device or connect with an Allegion team member.

4500C Series Electric Strike Complete Pac

The 4500C series electric strike is designed for installation in 2" UL 10C fire rated frames with 1/2" drywall penetration. The 4500C features a low profile 1-3/8" depth, heavy-duty stainless steel construction. Its strength is derived from a unique keeper pin locking design, enabling the 4500C to exceed the ratings of the frame, door and locking hardware.

Low Profile

Heavy Duty Construction

Convenient & Versatile

• Includes two faceplates to accommodate either cylindrical or mortise locksets up to a 3/4" throw latchbolt

Printed in the U.S.A. Patent pending and/or patent www.assaabloydss.com/patents

Copyright © 2022, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. HES-98-0922

800 626 7590 | hesinnovations.com

10027 S. 51st Street, Ste. 102 Phoenix, AZ 85044 USA

How to Order

SERIES FINISH OPTION (S)

4500C – 630 – LBM

4500C �Complete Electric Strike; includes faceplates for cylindrical and mortise locks 605 � Bright Brass (blank) No Monitor 606 � Satin Brass LBM � Latchbolt Monitor 612 � Satin Bronze LBSM � Latchbolt Strike Monitor 613 � Bronze Toned 629 � Bright Stainless Steel 630 � Satin Stainless Steel

Features

accommodate a variety of locksets

horizontal adjustment

• Dual voltage 12 or 24 VAC/VDC

Certifications

Marshal Listed (old)

Door [Fail Secure Only]

• UL 294 Listed

Specifications Frame Application

Electrical

AC intermittent duty only

Options

Accessories

Dimensions

P O

S

IT

IO

N

S E

N S

O R

S

74 www.edwardssignaling.com1-800-336-4206

T M

Order Information Electrical Specifications Part Number Contact1 Load Rating Switching Voltage Switching Current Contact Sense Range2 Lead Configuration (AC/DC) (AC/DC) (AC/DC) Resistance Nominal Length

Warning— Each electrical rating is an individual maximum and cannot be exceeded!

Applications

General Specifications

1.20" 3.05cm

1.51" 3.84cm

1.12" 2.84cm

0.95" 2.41cm

0.38" 0.97cm

0.63" 1.60cm

0.05" 0.13cm

0.5" 1.27cm

0.99" 2.51cm

0.63" 1.60cm

218010415 Oval

Intrusion Alarm Systems | DS150i Series Request-to-exit Detectors

DS150i Series Request-to-exit Detectors www.boschsecurity.com u Single or double door use u Wall or ceiling mountable u Internal vertical pointability u Wrap-around coverage pattern u Selectable relay trigger mode

The DS150i Series consists of the DS150i Detector (light gray) and the DS151i Detector (black). They are specifically designed for Request-to-exit (REX) applications. The DS150i and DS151i detect motion in their coverage area and signal an access control system or door control device.

Functions

Test Features Externally visible activation LED.

Certifications and approvals

Region Regulatory compliance/quality marks

Australia RCM [DS150i]

Europe CE EMC, LVD, RoHS [DS150i DS151i]

Russia GOST ТС N RU Д-NL.МН09.В.00334 EAC

USA UL ALVY: Access Control Systems Units (UL294) [DS150i, DS151i]

Installation/configuration notes

4.5 m 0 m 4.5 m

0 ft

15 ft

15 ft 0 ft 15 ft

0 m

4.5 m

4.5 m 0 m 4.5 m

0 ft

15 ft

15 ft 0 ft 15 ft

0 m

4.5 m +14°

3 m 0 m 3 m

0 ft

5 ft

10 ft 0 ft 10 ft

0 m

1.5 m

-14°

Front View and Top Views A front view of the DS150i and DS151i coverage, as well as top views of the coverage pattern on the floor. The typical coverage measurements are

2.4 m x 3 m (8 ft x 10 ft).

0 m 1.5 m

5 ft

0 m 4.5 m 0 m

4.5 m 15 ft

15 ft

-14° +14°

0 ft0 ft

0 ft

Side View A side view of the DS150i and DS151i coverage pattern.

Technical specifications

Electrical

Current Draw: 26 mA at 12 VDC

Voltage: 12 VAC or VDC; 24 VAC or VDC

Mechanical

Alarm Output: Two Form C relay contacts

Indicators: One activation LED

Relay Latch Time:

Adjustable to 60 sec

Enclosure Dimensions:

3.8 cm x 15.9 cm x 3.8 cm (1.5 in. x 6.25 in. x 1.5 in.)

Enclosure Material:

High impact ABS plastic enclosure

Power Loss Default Mode:

Programmable fail-safe or fail-secure modes.

Timer Mode: Programmable reset (accumulative) or non-reset (counting) mode.

Mounting Location:

Surface mount on wall or ceiling

Environmental

Operating Temperature:

-29°C to +49°C (-20°F to +120°F)

Radio Frequency Interference (RFI) Immunity:

No alarm or setup on critical frequencies in the range from 26 MHz to 1000 MHz at 50 V/m.

Ordering information

DS150I Request-to-exit sensor For use in Request-to-EXit (REX) applications. Provides PIR, 2.4 m x 3 m (8 ft x 10 ft) coverage.

Order number DS150I

EWE-DETCTR-IW 12mths wrty ext detector general 12 months warranty extension Order number EWE-DETCTR-IW

DS151I Request-to-exit sensor, black Black enclosure. For use in Request-to-EXit (REX) applications. Provides PIR, 2.4 m x 3 m (8 ft x 10 ft) coverage.

Order number DS151I

EWE-DETCTR-IW 12mths wrty ext detector general 12 months warranty extension Order number EWE-DETCTR-IW

Accessories

TP160 Trim plate for DS150 and DS160 A light gray trim plate used when mounting the detector over a standard single-gang box.

Order number TP160

TP161 Trim plate for DS151 and DS161, black A black trim plate used when mounting the sensor over a standard single-gang box.

Order number TP161

2 | DS150i Series Request-to-exit Detectors

3 | DS150i Series Request-to-exit Detectors

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V.

P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 emea.securitysystems@bosch.com emea.boschsecurity.com

Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com

Bosch Security Systems, LLC 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 onlinehelp@us.bosch.com www.boschsecurity.us

Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia

© Bosch Security Systems 2021 | Data subject to change without notice 2634162571 | en, V15, 16. Feb 2021