3.Polk_Mechanical.pdf
PDF 6 MB Posted
- Attached to
- Phase 2 Polk Building Renovations
- Solicitation number
- PSUT-26-06
- Issued by
- Broward County, Florida
About this file
This is a mechanical notes and construction plans document for Phase 2 Polk Building Renovations, a project undertaken by the City of Pembroke Pines, Florida, located at 8200 South Palm Drive. The project involves comprehensive HVAC system installation and renovation across a multi-building facility, including the design and installation of air handling units (AHUs), condensing units (CUs), outdoor air units (OAUs), exhaust fans, and associated ductwork, diffusers, and controls. The mechanical scope encompasses 11 air handling units, 11 condensing units, and 4 outdoor air units distributed across the facility to serve multiple zones with varying capacities ranging from 5 to 20 tons. The contractor must furnish all labor, materials, and equipment necessary for complete system installation in accordance with the Florida Building Code 2020, ASHRAE standards, SMACNA guidelines, and applicable state and local ordinances. Key deliverables include submission of five copies of shop drawings and manufacturer submittals, "as-built" drawings upon completion, test and balance reports per AABC or NEBB standards for systems exceeding 15 tons, and a comprehensive written report on the operating condition of all HVAC units.
The contractor is responsible for all costs related to permits, inspections, field verification of existing conditions, site coordination with other trades, and provision of a one-year warranty on all mechanical systems and components, with a five-year warranty specifically for compressors. All equipment must be UL or ETL listed and new from U.S. manufacturers of good quality. For buildings located within 3,000 feet of the ocean, the contractor must utilize non-ferrous materials or provide corrosion coating by third-party applicators such as BLYGOLD, LUVATA, or ADVANCOAT with a standard five-year warranty. Specific equipment manufacturers identified in the schedules include Trane for air handling and condensing units, with detailed specifications for each unit including tonnage, refrigerant type (R-410A), voltage (208/3 phase), and performance ratings (SEER/IPLV values). The project requires coordination with electrical, plumbing, fire sprinkler, and structural contractors to ensure a fully integrated mechanical and control system. Refrigerant line runs are limited to a maximum of 150 feet equivalent length, with extended accessories required for longer runs, and suction line accumulators and liquid line solenoid valves must be installed if specified distances are exceeded.
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
M0.1
M
EC
H
AN
IC
AL
N O
TE
S
3501 Griffin Road
(954) 266-2700 Fx: (954) 266-2701 Ft. Lauderdale, FL 33312 sma@saltzmichelson.com
AR-0009976
SD
REVISIONS
Date:
Checked By:
Drawn By:
Project No.:
EQ
2022-133
Sheff L. Devier III AR0007699
S
T
A
T
E
O
F F
L
O
R
I
D
A
S
H
E
L
DE
V
I
R
I
I
R
E
G
I
S
T
E
R
E
D A
R
C
H
I
T
E
C
T
AR0007699
11/17/2023 signed
KAMM CONSULTING PROJECT #: 2022-0686
PROJECT MANAGER: GREG KEMP
Certification of Authorization #8189
Deerfield Beach, Florida 33442 Phone 954.949.2200 Fax 954.949.2201 engineering@kammconsulting.com date
1407 West Newport Center Drive
AutoCAD SHX Text
%%UCONTRACTOR NOTES
AutoCAD SHX Text CONTRACTOR SHALL CLEAN, SERVICE, AND REPAIR EXISTING HVAC EQUIPMENT AS REQUIRED. TO INCLUDE CLEANING EVAPORATOR AND CONDENSER COIL. CHECK CONDENSATE DRAIN PAN AND CONDENSATE DRAIN LINE. SUPPLY TO THE OWNER/ENGINEER A WRITTEN REPORT ON THE OPERATING CONDITION OF THE UNIT(S).
AutoCAD SHX Text IF UNIT IS LOW IN REFRIGERANT, CONTRACTOR SHALL LEAK CHECK UNIT. REPORT ANY PHYSICAL DAMAGE TO THE UNIT(S).
AutoCAD SHX Text CONTRACTOR TO FIELD VERIFY NECK SIZE AND PROVIDE NEW DIFFUSER IF NOT SUITABLE FOR NEW AIRFLOW.
AutoCAD SHX Text
MECHANICAL NOTES, LEGEND & INDEX
AutoCAD SHX Text M0.1
AutoCAD SHX Text
MECHANICAL PLAN & ENLARGED MECHANICAL ROOMS
AutoCAD SHX Text M2.1A
AutoCAD SHX Text
MECHANICAL SCHEDULES
AutoCAD SHX Text M6.1, M6.2
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
SHEET#
AutoCAD SHX Text %%uMECHANICAL SHEET INDEX
AutoCAD SHX Text
MECHANICAL DETAILS
AutoCAD SHX Text M7.1
AutoCAD SHX Text
DD
AutoCAD SHX Text
APPLY TO THESE PLANS
AutoCAD SHX Text
NOT ALL SYMBOLS MAY
AutoCAD SHX Text
(3'0" SERVICE CLEARANCE)
AutoCAD SHX Text
BOX WITH REHEAT COIL
AutoCAD SHX Text
STANDARD SINGLE DUCT VAV
AutoCAD SHX Text
(3'0" SERVICE CLEARANCE)
AutoCAD SHX Text
WITHOUT REHEAT COIL
AutoCAD SHX Text
STANDARD SINGLE DUCT VAV BOX
AutoCAD SHX Text
VCEF
AutoCAD SHX Text 10"
AutoCAD SHX Text
VAV
AutoCAD SHX Text
VAV
AutoCAD SHX Text
AP - ACCESS PANEL
AutoCAD SHX Text
SECTION MARK
AutoCAD SHX Text
DUCT SMOKE DETECTOR
AutoCAD SHX Text
RETURN AIR FIRE SMOKE DAMPER
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FIRE-SMOKE DAMPER
AutoCAD SHX Text
FIRE SMOKE DAMPER
AutoCAD SHX Text
MOTORIZED DAMPER
AutoCAD SHX Text
SMOKE DAMPER
AutoCAD SHX Text M
AutoCAD SHX Text
RAFSD
AutoCAD SHX Text
BELLMOUTH TAP
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text
SHOE TAP DAMPER
AutoCAD SHX Text
ROUND UP
AutoCAD SHX Text
FD
AutoCAD SHX Text
"Z" BOOT TRANSFER DUCT
AutoCAD SHX Text
SHT.
AutoCAD SHX Text A-A
AutoCAD SHX Text
CEILING EXHAUST FAN
AutoCAD SHX Text
INLINE EXHAUST FAN
AutoCAD SHX Text
SIDEWALL EXHAUST FAN
AutoCAD SHX Text
ROOF EXHAUST FAN
AutoCAD SHX Text
DIFFUSER OR GRILLE DESIGNATION
AutoCAD SHX Text
EQUIPMENT TAG
AutoCAD SHX Text
DIFFUSER OR GRILLE DESIGNATION
AutoCAD SHX Text
RETURN/EXHAUST AIR
AutoCAD SHX Text
VARIABLE FREQ. DRIVE CONTROL PANEL
AutoCAD SHX Text
DOOR UNDER CUT
AutoCAD SHX Text
POC- POINT OF CONNECTION
AutoCAD SHX Text
THERMOSTAT
AutoCAD SHX Text
WALL SWITCH
AutoCAD SHX Text
NEW DUCTWORK
AutoCAD SHX Text
EXISTING DUCTWORK
AutoCAD SHX Text U/C
AutoCAD SHX Text
WS
AutoCAD SHX Text
RETURN AIR
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text H
AutoCAD SHX Text T
AutoCAD SHX Text
HUMIDISTAT
AutoCAD SHX Text %%uMECHANICAL LEGEND
AutoCAD SHX Text
REDUCER OR INCREASER
AutoCAD SHX Text
SLOT / LINEAR DIFFUSER
AutoCAD SHX Text
VOLUME CONTROL DAMPER
AutoCAD SHX Text
WALL LOUVER / WALL DIFFUSER.
AutoCAD SHX Text
EXISTING R/A CEILING GRILLE
AutoCAD SHX Text
NEW R/A CEILING GRILLE
AutoCAD SHX Text
NEW S/A CEILING DIFFUSER
AutoCAD SHX Text
EXISTING S/A CEILING DIFFUSER
AutoCAD SHX Text
EXISTING FLEX DUCT
AutoCAD SHX Text
NEW FLEX DUCT
AutoCAD SHX Text X
AutoCAD SHX Text
EQP
AutoCAD SHX Text A
AutoCAD SHX Text
CFM
AutoCAD SHX Text A
AutoCAD SHX Text
CFM
AutoCAD SHX Text
SUPPLY AIR
AutoCAD SHX Text
EF
AutoCAD SHX Text
EF
AutoCAD SHX Text
ELECTRIC DUCT HEATER
AutoCAD SHX Text
EDH
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RELOCATE EXISTING
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text N
AutoCAD SHX Text
RE
AutoCAD SHX Text E
AutoCAD SHX Text
RETURN AIR FIRE DAMPER
AutoCAD SHX Text
RAFD
AutoCAD SHX Text
EXISTING FIRE DAMPER
AutoCAD SHX Text
FD(E)
AutoCAD SHX Text
REMOTE KEY TEST STATION
AutoCAD SHX Text K
AutoCAD SHX Text
WALL SWITCH
AutoCAD SHX Text
SPT
AutoCAD SHX Text
BUTTERFLY VALVE
AutoCAD SHX Text
BALANCING VALVE
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text CONTRACTOR SHALL VERIFY ALL THE SIZES AND CAPACITIES OF EXISTING DUCTWORK PRIOR TO SUBMITTING ANY BID OR COMMENCING ANY WORK. ANY DISCREPANCIES SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER.
AutoCAD SHX Text ALL INFORMATION SHOWN ON THESE PLANS WAS OBTAINED FROM ORIGINAL CONSTRUCTION DOCUMENTS, AND LIMITED FIELD OBSERVATIONS. THE ENGINEER MAKES NO REPRESENTATION FOR THE ACCURACY OF SUCH INFORMATION AND/OR ALL THE EXISTING MATERIALS, DIMENSIONS, CONDITIONS, ETC.
AutoCAD SHX Text CONTRACTOR SHALL VISIT THE SITE AND VERIFY EXISTING CONDITIONS PRIOR TO SUBMITTING ANY BID OR COMMENCING ANY WORK. ANY DISCREPANCIES SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER.
AutoCAD SHX Text
%%UMECHANICAL NOTES
AutoCAD SHX Text THE CONTRACTOR SHALL FURNISH ALL LABOR, MATERIALS, AND EQUIPMENT NECESSARY FOR THE INSTALLATION OF A COMPLETE SYSTEM IN ACCORDANCE WITH THESE DRAWINGS, THE FLORIDA BUILDING FLORIDA BUILDING CODE 2020 AND ALL OTHER APPLICABLE STATE, COUNTY AND LOCAL ORDINANCES AND THE LISTED AND ALL OTHER APPLICABLE STATE, COUNTY AND LOCAL ORDINANCES AND THE LISTED EDITION OF THE FOLLOWING PUBLICATIONS; SMACNA/ANSI-2005, SMACNA-10, 85; ASHRAE 15-2010; SMACNA/ANSI-2005, SMACNA-10, 85; ASHRAE 15-2010; 34-2010 62.1-2010; NFPA 70-2011, 72-2010, 90A-2012, 90B-2012, 91-2010, 96-2008, 101-2012; NEBB-2005; NAIMA-2002; NFRC-100-2010, 200-2010, 400-2010; ANSI Z10.1-98, Z10.3-98, Z21.8-94, Z21.83-98.
AutoCAD SHX Text THE CONTRACTOR SHALL PAY ALL COSTS OF PERMIT, INSPECTIONS AND ALL OTHER COSTS INCIDENTAL TO THE COMPLETION AND TESTING OF THIS WORK.
AutoCAD SHX Text
THE CONTRACTOR SHALL VISIT THE SITE AND COORDINATE WORK WITH OTHER TRADES.
AutoCAD SHX Text
THE CONTRACTOR SHALL SUPPLY THE ARCHITECT/ENGINEER WITH "AS-BUILT" DRAWINGS.
AutoCAD SHX Text CONTRACTOR SHALL SUBMIT, FOR APPROVAL FIVE [5] COPIES OF A COMPLETE SET OF SHOP DWGS, MANUFACTURER'S SUBMITTALS FOR EACH PIECE OF EQUIPMENT & CONTROLS INCLUDED IN CONTRACT.
AutoCAD SHX Text
DUCTWORK:
AutoCAD SHX Text AAA. ALL AIR CONDITIONING DUCT WORK ENCLOSED IN A CHASE SHALL BE SHEETMETAL GALVANIZED WITH ALL AIR CONDITIONING DUCT WORK ENCLOSED IN A CHASE SHALL BE SHEETMETAL GALVANIZED WITH EXTERNAL BLANKET INSULATION R-6 MIN. PROVIDE INNER LINER FOR THE FIRST 10 FEET OF THE MAIN TRUNKS CONNECTING TO THE UNIT AND INCLUDING THE FIRST ELBOW OR AS INDICATED ON THE PLANS.
AutoCAD SHX Text B. ALL AIR CONDITIONING DUCT WORK SHALL BE OF 1-1/2" (R-6) HEAVY DUTY FOIL REINFORCED ALL AIR CONDITIONING DUCT WORK SHALL BE OF 1-1/2" (R-6) HEAVY DUTY FOIL REINFORCED FIBERGLASS WITH MANUFACTURER'S LOGO PRINTED ON VAPOR BARRIER ALL FLEXIBLE DUCT TO BE R-6 WITH A MAX. TOTAL LENGTH NOT TO EXCEED 15 FT. INSTALL UL LISTED FOR PLENUM, FLEXIBLE DUCTWORK ELBOW SUPPORTS AT EACH DIFFUSER, GRILLE, AND REGISTER EQUAL TO "FLEXFLOW ELBOW" AS MANUFACTURED BY "THERMAFLEX".
AutoCAD SHX Text D. ALL OUTDOOR EXPOSED DUCTWORK SHALL BE GALVANIZED, DOUBLE WALL SHEETMETAL EQUAL TO ALL OUTDOOR EXPOSED DUCTWORK SHALL BE GALVANIZED, DOUBLE WALL SHEETMETAL EQUAL TO UNITED McGILL "K-27", WITH MIN. R-8 INSULATION AND SEALED SEAMS AND JOINTS. THE CONTRACTOR SHALL PROVIDE ALL SHEETMETAL DUCTWORK, HANGERS, AUX. SUPPORT STEEL, ETC. PROVIDE SOLID LINER AND COAT WITH TWO COATS OF CORROSION-RESISTANT PAINT OR EQUIVALENT. PROVIDE OPTIONAL (OWNER'S DECISION) ALUMINUM OR STAINLESS STEEL CONSTRUCTION.
AutoCAD SHX Text SPECIAL NOTE: : SMACNA DUCT PRESSURE CLASSES BASED ON OPERATING PRESSURE ARE: 1/2", 1", 2", 3", 4", 6", AND 10". EACH DUCT SYSTEM SHALL BE CONSTRUCTED FOR THE SPECIFIC DUCT PRESSURE CLASS SHOWN ON PLANS. WHERE NO PRESSURE CLASS IS SPECIFIED FOR CONSTANT VOLUME SYSTEMS, 1" W.G. PRESSURE CLASS IS THE BASIS OF COMPLIANCE WITH THE SMACNA STANDARDS REGARDLESS OF VELOCITY. WHERE NO PRESSURE CLASS IS SPECIFIED FOR VARIABLE VOLUME SYSTEMS, 2" W.G. PRESSURE CLASS IS THE BASIS OF COMPLIANCE WITH THE SMACNA STANDARDS FOR DUCTWORK UPSTREAM OF VAV BOXES. ALL DUCTWORK SHALL BE SEALED TO SMACNA "HVAC DUCT CONSTRUCTION STANDARDS" FOR ITS PRESSURE CLASS SEALING METHODS.
AutoCAD SHX Text ALL EXHAUST DUCTS AND OUTSIDE AIR DUCTS SHALL BE GALVANIZED SHEET METAL WITH SEALED SEAMS AND JOINTS. ALL OUTSIDE AIR DUCT SHALL BE INSULATED WITH EXTERNAL BLANKET INSULATION R-6 MIN. ALL METAL EXHAUST, MAKE-UP OR OTHERWISE DUCTS INSTALLED IN LOCATIONS WHERE DEWPOINT CONDITIONS CAN OCCUR INSIDE THE DUCT SHALL BE EXTERNALLY INSULATED WITH R-6 MIN. AIR INTAKE AND EXHAUST OPENINGS SHALL BE SCREENED WITH A CORROSION RESISTANT MATERIAL PER FMC 2020, FMC 2020, TABLE 401.5.501.3.2. LOUVERS THAT PROTECT EXHAUST OPENINGS IN STRUCTURES LOCATED IN 501.3.2. LOUVERS THAT PROTECT EXHAUST OPENINGS IN STRUCTURES LOCATED IN HURRICANE-PRONE REGIONS, AS DEFINED IN THE FLORIDA BUILDING CODE (BUILDING) SHALL COMPLY WITH AMCA STANDARD 550. OUTDOOR OPENINGS LOCATED IN EXTERIOR WALLS SHALL MEET THE PROVISIONS FOR EXTERIOR WALL OPENING PROTECTIVES IN ACCORDANCE WITH THE FLORIDA BUILDING CODE (BUILDING).
AutoCAD SHX Text O/A INTAKES SHALL NOT BE TAKEN FROM A LOCATION CLOSER THAN 10 FT FROM ANY CHIMNEY, VENT OUTLET OR SANITARY SEWER VENT OUTLET PER FMC 2020, SEC. 401.4. OUTSIDE AIR INTAKE VENTS FMC 2020, SEC. 401.4. OUTSIDE AIR INTAKE VENTS OUTSIDE AIR INTAKE VENTS LOCATED ON ROOFS WILL BE PROPERLY MARKED WITH A UNIVERSAL MARKING "INTAKE", PERMANENTLY ATTACHED.
AutoCAD SHX Text
DUCT SIZES SHOWN ON PLANS ARE INSIDE DIMENSIONS.
AutoCAD SHX Text ALL AIR DEVICES (DIFFUSERS, REGISTERS AND GRILLES) SHALL BE ALL ALUMINUM CONSTRUCTION WITH EXPOSED SURFACE OFF WHITE BAKED ENAMEL FINISH OR AS SPECIFIED BY ARCHITECT. DEVICES SHALL BE AS SPECIFIED OR EQUAL TO TITUS, PRICE OR METALAIRE. PROVIDE OPPOSED BLADE DAMPERS AT ALL DIFFUSERS AND REGISTERS AS INDICATED ON PLANS. PROVIDE BALANCING DAMPERS FOR ALL SUPPLY AND RETURN DIFFUSERS AND REGISTERS AND TO ENSURE COMPLIANCE WITH FMC 2020 PAR.601.5 FOR FMC 2020 PAR.601.5 FOR FOR BALANCED RETURN/TRANSFER AIR FLOW.
AutoCAD SHX Text A.
AutoCAD SHX Text
%%UFOR NEW UNITS%%U:
AutoCAD SHX Text
SHALL BE COMBINATION COOLING/HEATING, WITH SYSTEM "COOL-AUTO- HEAT-OFF"
AutoCAD SHX Text
AND FAN "ON-AUTO" SELECTOR SWITCHES. PROVIDE PROGRAMMABLE TYPE AS RECOMMENDED BY
AutoCAD SHX Text
MANUFACTURER, HONEYWELL OR EQUAL. PROVIDE TAMPER PROOF COVERS.
AutoCAD SHX Text THERMOSTAT LOCATION SHALL BE APPROVED BY OWNER AND ENGINEER BEFORE INSTALLATION. INSTALL THERMOSTAT PER A.D.A REQUIREMENTS WHERE APPLICABLE; MAX. 48" HIGH FOR FORWARD REACH, MAX. 48" HIGH FOR SIDE REACH. MECHANICAL CONTRACTOR SHALL COORDINATE WITH ELECTRICAL CONTRACTOR ALL REQUIREMENTS FOR JUNCTION BOXES, CONDUITS, CONTROL WIRING, POWER, ETC. AND DEFINE RESPONSIBILITIES AND SCOPE OF WORK FOR EACH TRADE PRIOR TO PURCHASING/INSTALLATION.
AutoCAD SHX Text SPECIAL NOTE: WHENEVER THERE ARE MORE THAN ONE SENSOR OR THERMOSTAT, SIDE BY SIDE, THEY SHALL BE GANGED TOGETHER WITHIN THE SAME COVER PLATE WHEREVER POSSIBLE. CONTRACTOR SHALL COORDINATE THIS ISSUE WITH ARCHITECT/OWNER PRIOR TO INSTALLATION AND SHALL BRING ANY DISCREPANCY TO THE ENGINEER'S ATTENTION.
AutoCAD SHX Text REFRIGERANT LINES SHALL BE COPPER, TYPE "L" HARD DRAWN WITH WROUGHT COPPER BRAZING-JOINT TYPE FITTINGS, USE BRAZING MATERIALS FOR HIGH PRESSURE PIPING PER AWS A5.8: BCuP SERIES COPPER-PHOSPHORUS ALLOY OR BAg1 SILVER ALLOY. REFRIGERANT LINES SHALL BE SIZED PER MANUFACTURER'S RECOMMENDATIONS. SOFT COPPER TYPE "M" SHALL BE ALLOWED FOR RISER PIPING INSIDE CHASE TO LIMIT NUMBER OF JOINTS. COORDINATE WITH ENGINEER FOR PRIOR APPROVAL. ALL EXPOSED INSULATION SHALL BE PROTECTED WITH A PROTECTIVE, PUNCTURE AND TEAR RESISTANT JACKETING SYSTEM EQUAL TO "VENTURE CLAD" AND COMPLY WITH FMC 2020, SEC.1101.3 PROTECTION.
AutoCAD SHX Text "ARMAFLEX" OR EQUAL INSULATION SHALL BE USED FOR SUCTION REFRIGERANT LINES WITH THICKNESS PER FLORIDA ENERGY CODE TABLE C403.2.8. FILTER/DRYER AND SIGHT GLASS SHALL BE PROVIDED AT LIQUID LINES.
AutoCAD SHX Text ALL BRANCH TAKE-OFFS TO BE PROVIDED W/ MANUAL VOLUME DAMPERS. PROVIDE RADIUS ELBOWS WHERE FEASIBLE, SQUARE ELBOWS AND TEE'S SHALL BE FURNISHED W/SINGLE FOIL TURNING VANES. PROVIDE MANUAL VOLUME DAMPERS WITH EXTRACTOR AT ALL FLEX TAKE-OFFS. PROVIDE REMOTE, CABLE OPERATED VOLUME DAMPERS IN INACCESIBLE AND HARD CEILING AREAS, "YOUNG REGULATOR" OR EQUAL.
AutoCAD SHX Text PROVIDE NEW FILTERS FOR ALL AIR CONDITIONING EQUIPMENT BEFORE START-UP, REPLACE PRIOR TO FINAL ACCEPTANCE BY OWNER.
AutoCAD SHX Text 1.
AutoCAD SHX Text 2.
AutoCAD SHX Text 3.
AutoCAD SHX Text 4.
AutoCAD SHX Text 5.
AutoCAD SHX Text 6.
AutoCAD SHX Text 7.
AutoCAD SHX Text 8.
AutoCAD SHX Text 9.
AutoCAD SHX Text 10.
AutoCAD SHX Text C. ALL DUCTWORK SHALL BE GALVANIZED SHEETMETAL WITH SEALED SEAMS AND JOINTS WITH EXTERNAL ALL DUCTWORK SHALL BE GALVANIZED SHEETMETAL WITH SEALED SEAMS AND JOINTS WITH EXTERNAL BLANKET INSULATION R-6 MIN. THE CONTRACTOR SHALL PROVIDE ALL SHEETMETAL DUCTWORK, HANGERS, AUX. SUPPORT STEEL, ETC., ALL FLEX DUCT SHALL BE RATED CLASS I, UL-181 LISTED WITH METALLIZED INNER AND OUTER FOIL LINERS, MIN. R-6 WITH A MAX. TOTAL LENGTH NOT TO EXCEED 15 FT. INSTALL UL LISTED FOR PLENUM, FLEXIBLE DUCTWORK ELBOW SUPPORTS AT EACH DIFFUSER, GRILLE, AND REGISTER EQUAL TO "FLEXFLOW ELBOW" AS MANUFACTURED BY "THERMAFLEX". ALL METAL DUCTS SHALL BE FABRICATED IN ACCORDANCE WITH LATEST EDITION OF S.M.A.C.N.A.
AutoCAD SHX Text 11.
AutoCAD SHX Text 12.
AutoCAD SHX Text 13.
AutoCAD SHX Text 14.
AutoCAD SHX Text 15.
AutoCAD SHX Text 16.
AutoCAD SHX Text 17.
AutoCAD SHX Text TEMPERATURE CONTROLS/THERMOSTAT: CONTRACTOR SHALL PROVIDE A FULLY INTEGRATED BUILDING CONTROL SYSTEM. PROVIDE EMS INTERFACE FOR ALL HVAC EQUIPMENT, WHERE APPLICABLE AS REQUIRED BY THE EXISTING CONTROLS
AutoCAD SHX Text ALL MATERIAL SHALL BE NEW OF U.S. MANUFACTURER OF GOOD QUALITY. ALL WORK SHALL BE PERFORMED AT INDUSTRY STANDARD QUALITY LEVEL BY CERTIFIED PROFESSIONALS. ALL EQUIPMENT SHALL BE UL OR ETL LISTED. ALL INSTALLATIONS SHALL COMPLY WITH FMC 2020, CH. 3, GENERAL REGULATIONS. FOR BUILDINGS LOCATED WITHIN 3,000 FT FROM THE OCEAN, CONTRACTOR SHALL UTILIZE NON-FERROUS MATERIALS OR PROVIDE CORROSION COATING FOR ALL OUTDOOR EXPOSED METAL/STEEL EQUIPMENT, SUPPORTS, STANDS, FASTENERS, ETC. BY 3RD PARTY AS APPLIED BY BLYGOLD, LUVATA, ADVANCOAT (ENSEAL CR) OR APPROVED EQUAL WITH STANDARD 5-YEAR WARRANTY.
AutoCAD SHX Text DUCTWORK CONSTRUCTION, INSTALLATION AND MINIMUM INSULATION R-VALUES SHALL COMPLY WITH FEC 2020, SEC. C403.2.7 AND TABLE C403.2.7.1, S.M.A.C.N.A. MANUAL FOR MEANS AND METHODS AND MANUFACTURER'S INSTRUCTIONS. DUCT SIZING IS COMPLIANT WITH FBC SEC. 603.2 BASED ON ASHRAE "EQUAL FRICTION" METHOD, UNLESS SPECIFICALLY NOTED OTHERWISE ON PLANS.
AutoCAD SHX Text
%%UMECHANICAL NOTES
AutoCAD SHX Text PROVIDE TYPE "B" DYNAMIC FIRE DAMPERS WITH SERVICE ACCESS DOORS IN ALL DUCTS AND OPENINGS PENETRATING FIRE RATED WALLS, MECHANICAL AND ELECTRICAL EQUIPMENT ROOMS, TENANT SEPARATION, PARTITIONS, FLOOR OR ROOF SLABS AND AT OUTSIDE AIR INTAKES AS REQUIRED. PROVIDE RADIATION DAMPERS IN RATED CEILINGS FOR ALL CEILING OPENINGS, CEILING FANS, DIFFUSERS OR GRILLES RATED FOR USE IN THE CEILING ASSEMBLY. PROVIDE LOW-LEAKAGE CLASS DAMPERS FOR ALL SITUATIONS WHERE THE AIRFLOW CFM HAS TO BE CONTROLLED. VERIFY AND REPLACE AS REQUIRED FOR EXISTING SYSTEMS.
AutoCAD SHX Text A LISTED SMOKE-DAMPER DESIGNED TO RESIST THE PASSAGE OF SMOKE SHALL BE PROVIDED AT EACH PENETRATION OF A SMOKE BARRIER IN COMPLIANCE WITH FMC 2020, SEC. 607.5.4 AND CONTROLLED AS FMC 2020, SEC. 607.5.4 AND CONTROLLED AS AND CONTROLLED AS REQUIRED BY SEC. 607.5.4.1. PROVIDE SERVICE ACCESS AS REQUIRED.
AutoCAD SHX Text HVAC CONTRACTOR SHALL PROVIDE A T & B REPORT PER FEC 2020, SEC. C 408.2.2. FOR SYSTEMS OVER FEC 2020, SEC. C 408.2.2. FOR SYSTEMS OVER . FOR SYSTEMS OVER 15 TONS, THE T & B SHALL BE PERFORMED BY A CERTIFIED, INDEPENDENT COMPANY FOR ALL MECHANICAL EQUIPMENT, AIR DEVICES, DAMPERS, AND ANY AIR MOVING SYSTEMS. THE TEST AND BALANCE REPORT SHALL BE IN ACCORDANCE WITH THE AABC OR NEBB STANDARDS AND PROCEDURES AND SHALL INCLUDE AIR QUANTITIES FOR ALL SUPPLY GRILLES, RETURN GRILLES AND EXHAUST GRILLES AND THE LEAVING AND ENTERING AIR TEMPERATURE (°F) FROM SUPPLY GRILLES, EVAPORATORS, ENERGY RECOVERYUNITS AND ANY TYPE OF HEAT EXCHANGERS. BUILDING ENVELOPE SHALL BE POSITIVELY PRESSURIZED TO PREVENT INFILTRATION PER FEC 2020, SEC. C 408.2.2.1.
AutoCAD SHX Text RUN INSULATED FIRE RATED CONDENSATE DRAINS AS REQUIRED. AUXILARY DRAIN PANS SHALL BE INSTALLED UNDER ALL COILS ON WHICH CONDENSATION CAN OCCUR AND UNDER ALL UNITS IN CONCEALED SPACES OR ANY AREA WHERE BLDG. DAMAGE CAN OCCUR AS A RESULT OF AN OVERFLOW, TO COMPLY WITH FMC 2020, PAR. 307.2. AN ALTERNATE WATER-DETECTION LEVEL DEVICE TO SHUT DOWN THE AN ALTERNATE WATER-DETECTION LEVEL DEVICE TO SHUT DOWN THE EQUIPMENT IS ACCEPTABLE.
AutoCAD SHX Text MECHANICAL EQUIPMENT ON ROOF OR ELEVATED STRUCTURES SHALL COMPLY WITH FMC 2020 FMC 2020 PAR. 306.5 IF INSTALLED HIGHER THAN 16 FEET A.F.F. MECHANICAL EQUIPMENT INSTALLED IN IF INSTALLED HIGHER THAN 16 FEET A.F.F. MECHANICAL EQUIPMENT INSTALLED IN ATTICS SHALL MEET THE REQUIREMENTS OF FMC 2020 PAR. 306.3 IF THE EQUIPMENT CAN NOT FMC 2020 PAR. 306.3 IF THE EQUIPMENT CAN NOT IF THE EQUIPMENT CAN NOT BE SERVICED/REMOVED THROUGH REQUIRED OPENING. MECHANICAL EQUIPMENT SHALL BE PROTECTED WITH MECHANICAL BARRIERS IF EXPOSED TO MECH. DAMAGE. ALL EQUIPMENT SHALL BE INSTALLED ON CONCRETE PADS AT GRADE LEVEL, SIZED PER STRUCTURAL PLANS.
AutoCAD SHX Text SPECIAL NOTE: ALL WIND LOAD AND OTHER COMPLIANCE CALCULATIONS AND/OR INSTALLATION DETAILS FOR OUTDOOR MOUNTED MECHANICAL EQUIPMENT AS REQUIRED BY FBC 2020, SEC. 1509, 1522 AND CHAPTER 16, SHALL FBC 2020, SEC. 1509, 1522 AND CHAPTER 16, SHALL , SHALL BE PROVIDED BY A STRUCTURAL ENGINEER AND ARE SHOWN ON THESE PLANS FOR REFERENCE ONLY. SUCH CALCULATIONS SHALL BE PROVIDED BY THE EQUIPMENT MANUFACTURER OR BY THE GENERAL OR MECHANICAL CONTRACTOR ON BEHALF OF CLIENT. CONTRACTOR TO PROVIDE WIND LOAD CALCULATIONS SIGNED AND SEALED BY A FLORIDA REGISTERED STRUCTURAL ENGINEER IN ORIGINAL FOR COMPLIANCE WITH SEC. 301.15 OF FMC 2020, INCLUDING ANY IN ORIGINAL FOR COMPLIANCE WITH SEC. 301.15 OF FMC 2020, INCLUDING ANY FOR COMPLIANCE WITH SEC. 301.15 OF FMC 2020, INCLUDING ANY DOCUMENTATION REQUIRED BY LOCAL JURISDICTION FOR PERMIT PURPOSES.
AutoCAD SHX Text PROVIDE A MIN. OF 36" CLEARANCE IN FRONT OF ALL 120-208/240 VOLT PANELS AND MIN. 42" CLEARANCE IN FRONT OF ANY 277-480 VOLT PANEL. PROVIDE ADEQUATE SIDE CLEARANCE PER NEC 110.26.
AutoCAD SHX Text MECHANICAL PLANS IN GENERAL, ARE DIAGRAMMATIC IN NATURE, AND ARE TO BE READ IN CONJUNCTION WITH ARCHITECTURAL, PLUMBING, ELECTRICAL, FIRE SPRINKLER, AND STRUCTURAL PLANS AND SHALL BE CONSIDERED AS ONE SET OF DOCUMENTS. DUCT AND PIPING OFFSETS, BENDS AND TRANSITIONS SHALL BE REQUIRED TO PROVIDE AND INSTALL A COMPLETE FUNCTIONAL SYSTEM AND SHALL BE PROVIDED BY THE CONTRACTOR AT NO ADDITIONAL COST TO THE OWNER. CHANGES IN DUCTWORK SIZE AND ROUTE WILL BE REQUIRED TO AVOID STRUCTURAL, PLUMBING, FIRE SPRINKLER AND ARCHITECTURAL BUILDING FEATURES. DUCTWORK CHANGES MAY BE MADE BY CONTRACTOR USING EQUIVALENT SIZED DUCT. CONTACT ENGINEER IF DUCT AREA WILL NOT FIT.
AutoCAD SHX Text THE CONTRACTOR SHALL VERIFY EXISTING CONDITIONS PRIOR TO BIDDING, ORDERING, FABRICATION OR INSTALLATION OF MATERIALS OR EQUIPMENT, IN ORDER TO PROVIDE A FULLY INTEGRATED MECHANICAL AND CONTROLS SYSTEMS WITH THE EXISTING ONES. ANY DISCREPANCY BETWEEN EXISTING CONDITIONS AND PLANS, OR ADDITIONAL CLARIFICATION REQ'D SHALL BE BROUGHT TO THE ATTENTION OF ENGINEER PRIOR TO FINAL BIDDING AND WORK.
AutoCAD SHX Text CONDENSATE DRAIN PIPING TO BE AS SPECIFIED PER PLUMBING PLANS. IF NOT SPECIFIED THEY SHALL BE TYPE "L" COPPER OR PVC WHERE ALLOWED BY CODE WITH INSULATION THICKNESS PER FEC 2020 TABLE FEC 2020 TABLE C403.2.8. PROVIDE APPROVED WATER LEVEL DETECTOR OR FLOAT SWITCH TO AUTOMATICALLY SHUT DOWN . PROVIDE APPROVED WATER LEVEL DETECTOR OR FLOAT SWITCH TO AUTOMATICALLY SHUT DOWN THE AIR COND. UNIT, AS A SECONDARY DRAIN SYSTEM TO COMPLY WITH FMC 2020, SEC. 307 SUPPLY FMC 2020, SEC. 307 SUPPLY SUPPLY CONDENSATE PUMP WHERE NECESSARY AS IMPOSED BY FIELD CONDITIONS OR INSTALLATION CHANGES AND PIPE TO CONDENSATE DRAIN PER PLUMBING PLANS.
AutoCAD SHX Text CLEARANCE FOR MAINTENANCE, SERVICE, REPAIRS, AND REPLACEMENT FOR ALL MECHANICAL EQUIPMENT SHALL BE PROVIDED TO COMPLY WITH FMC 2020, SEC. 306. SERVICE ACCESS PANELS FOR MECH. FMC 2020, SEC. 306. SERVICE ACCESS PANELS FOR MECH. . SERVICE ACCESS PANELS FOR MECH. EQUIPMENT IN CONCEALED SPACES SHALL BE PROVIDED TO COMPLY WITH THE REQUIREMENTS OF SEC. 306.SEC. 306.
AutoCAD SHX Text MANUFACTURER'S WARRANTY: CONTRACTOR SHALL PROVIDE WARRANTY FOR A PERIOD OF (1) ONE YEAR AFTER BUILDING C.O. FOR ALL MECHANICAL SYSTEMS, DUCTWORK, CONTROLS ACCESSORIES AND ALL OTHER EQUIPMENT, PARTS AND LABOR UNDER THESE DRAWINGS AND AND SPECIFICATIONS. CONTRACTOR SHALL PROVIDE WARRANTY FOR COMPRESSORS FOR (5) FIVE YEARS. ANY REPAIRS REQUIRING SYSTEM SHUTDOWN WILL BE DONE DURING NON-OPERATIONAL PERIODS OR AS AGREED WITH OWNER.
AutoCAD SHX Text IF REMODELLING AN EXISTING SPACE, THE CONTRACTOR SHALL VISIT THE SITE PRIOR TO BID. CONTRACTOR SHALL INSPECT ALL EXISTING AND NEW COMPONENTS OF THE MECHANICAL SYSTEMS AND ENSURE THAT ALL ARE OPERATIONAL AND WORKING AS SHOWN ON THE APPROVED CD PLANS AT THE TIME OF C.O.
AutoCAD SHX Text CONDENSER WATER PIPING SHALL BE BLACK STEEL SCH. 40 OR TYPE "L" HARD DRAWN COPPER.
AutoCAD SHX Text 18.
AutoCAD SHX Text 19.
AutoCAD SHX Text 20.
AutoCAD SHX Text 21.
AutoCAD SHX Text 22.
AutoCAD SHX Text 23.
AutoCAD SHX Text 24.
AutoCAD SHX Text 25.
AutoCAD SHX Text 26.
AutoCAD SHX Text 27.
AutoCAD SHX Text 28.
AutoCAD SHX Text 29.
AutoCAD SHX Text 30.
AutoCAD SHX Text 31.
AutoCAD SHX Text 32.
AutoCAD SHX Text CORROSION COATING: CONTRACTOR SHALL PROVIDE CORROSION COATING TO CONDENSER/EVAPORATOR COILS, EQUIPMENT CASINGS/CABINETS AND ALL EXPOSED COPPER PIPING/ COMPRESSORS/ CONDENSER ALL EXPOSED COPPER PIPING/ COMPRESSORS/ CONDENSER SECTION, AS WELL AS, ANY EXPOSED METAL WITHIN AIRSTREAM BY 3RD PARTY AS APPLIED BY BLYGOLD, BY 3RD PARTY AS APPLIED BY BLYGOLD, LUVATA, ADVANCOAT OR APPROVED EQUAL WITH STANDARD 5-YEAR WARRANTY.
AutoCAD SHX Text PROVIDE SMOKE DETECTORS WITH SERVICE ACCESS DOORS IN ALL AIR DISTRIBUTION SYSTEMS WITH A DESIGN CAPACITY GREATER THAN 2OOO CFM COMPLIANT WITH FMC 2020, SEC 606.2. FOR SMOKE DETECTORS NOT FOR SMOKE DETECTORS NOT VISIBLE, IN CONCEALED SPACES, PROVIDE REMOTE ANNUNCIATION/TEST STATION AS REQUIRED BY AUTHORITY HAVING JURISDICTION, COORDINATE PRIOR TO INSTALLATION. DETECTORS SHALL BE BY ONE MANUFACTURER, COORDINATE VOLTAGE ETC. WITH ELECTRICAL CONTRACTOR AND FIRE ALARM SYSTEM BEFORE ORDERING. UPON DETECTION, SMOKE DETECTORS SHUT DOWN ASSOCIATED AIR MOVING EQUIPMENT AND ALL AIR MOVING EQUIPMENT SERVING THAT COMMON PLENUM. SPECIAL NOTE: : ALL INSTALLED ELECTRICAL DEVICES, ACTUATORS, APPURTENANCES, AUXILIARY EQUIPMENT, ETC. REQUIRING ENVIRONMENTAL PROTECTION SHALL BE PROVIDED WITH ADEQUATE NEMA ENCLOSURES FOR THE CONDITIONS WHERE INSTALLED, WEATHER INDOORS OR OUTDOORS, EVEN IF NOT SPECIFICALLY INDICATED ON PLANS.
AutoCAD SHX Text ALL DUCT INSULATION SHALL HAVE A FLAME SPREAD INDEX NOT MORE THAN 25 AND A SMOKE DEVELOPED INDEX NOT MORE THAN 50, WHEN TESTED IN ACCORDANCE WITH ASTM E 84 OR UL 723.
AutoCAD SHX Text
FSD
AutoCAD SHX Text
MECHANICAL PLAN
AutoCAD SHX Text M2.1B, 2.1C
AutoCAD SHX Text
POLK BUILDING RENOVATION
AutoCAD SHX Text
CITY OF PEMBROKE PINES
AutoCAD SHX Text
8200 SOUTH PALM DRIVE
AutoCAD SHX Text
PEMBROKE PINES, FLORIDA, 33025
OFFICE
HALLWAY
HALLWAY
TOILET
BREAK ROOM
TOILET
153 JANITOR
STORAGE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
WORKSTATION
OFFICE
IT / MDF
ROOM
CONFERENCE
ROOM
MECHANICAL
ROOM
OFFICE
OFFICE
ROOM
ELECTRICAL
ROOM
WOMEN'S
RESTROOM
TOILET
TOILET
MECHANICAL
ROOM
MECHANICAL
ROOM
MECHANICAL
ROOM
3501 Griffin Road
(954) 266-2700 Fx: (954) 266-2701 Ft. Lauderdale, FL 33312 sma@saltzmichelson.com
AR-0009976
SD
REVISIONS
Date:
Checked By:
Drawn By:
Project No.:
EQ
2022-133
Sheff L. Devier III AR0007699
S
T
A
F
L
O
R
I
D
A
S
H
E
DE
V
I
I
R
E
G
I
S
T
E
R
E
D A
R
C
H
I
T
E
C
T
AR0007699
11/17/2023 signed
KAMM CONSULTING PROJECT #: 2022-0686
PROJECT MANAGER: GREG KEMP
Certification of Authorization #8189
Deerfield Beach, Florida 33442 Phone 954.949.2200 Fax 954.949.2201 engineering@kammconsulting.com date
1407 West Newport Center Drive
Rev # Description Date
M2.1A
M
EC
H
AN
IC
AL
P
LA
N
BLDG 67
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
10 TON AIR HANDLER (TWE120A-B)
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
MECHANICAL/AC YARD
AutoCAD SHX Text
SUCTION
AutoCAD SHX Text
REHEAT
AutoCAD SHX Text
BYPASS
AutoCAD SHX Text
LIQUID
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
OACU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
OACU
AutoCAD SHX Text
AutoCAD SHX Text
OACU
AutoCAD SHX Text
AutoCAD SHX Text
OACU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 22X16
AutoCAD SHX Text 18X16
AutoCAD SHX Text 14X14
AutoCAD SHX Text 24X16
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text T
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X8
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 20X26
AutoCAD SHX Text 22X28
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 20X20
AutoCAD SHX Text 14X14
AutoCAD SHX Text 22X22
AutoCAD SHX Text 16X14
AutoCAD SHX Text 14X12
AutoCAD SHX Text 12X12
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 10X8
AutoCAD SHX Text 22X24
AutoCAD SHX Text 24X26
AutoCAD SHX Text 16X14
AutoCAD SHX Text 16X18
AutoCAD SHX Text 12X12
AutoCAD SHX Text 14X12
AutoCAD SHX Text 10X8
AutoCAD SHX Text 8X8
AutoCAD SHX Text 10X10
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X8
AutoCAD SHX Text 10X10
AutoCAD SHX Text 8X6
AutoCAD SHX Text 6X6
AutoCAD SHX Text E/A
AutoCAD SHX Text E/A
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 6X6
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AHU-3
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 12X12
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
10 TON AIR HANDLER (TWE120A-B)
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text 8X8
AutoCAD SHX Text 8X6
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text E/A
AutoCAD SHX Text 8X8
AutoCAD SHX Text 12X10
AutoCAD SHX Text
EVH 660D 24X20
AutoCAD SHX Text
EVH 660D 40X20
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text 24X14
AutoCAD SHX Text 10X8
AutoCAD SHX Text 12X10
AutoCAD SHX Text 10X8
AutoCAD SHX Text 12X10
AutoCAD SHX Text
AHU-10
AutoCAD SHX Text
EVH 660D 30X20
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
POLK BUILDING RENOVATION
AutoCAD SHX Text
CITY OF PEMBROKE PINES
AutoCAD SHX Text
8200 SOUTH PALM DRIVE
AutoCAD SHX Text
PEMBROKE PINES, FLORIDA, 33025
AutoCAD SHX Text
WORK AREA HATCHED
AutoCAD SHX Text
%%UKEY PLAN
AutoCAD SHX Text n.t.s
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
ENTRANCE
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
%%UMECHANICAL PLAN
AutoCAD SHX Text 1/8"=1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
%%UENLARGED MECHANICAL ROOMS
AutoCAD SHX Text 1/4"=1'-0"
AutoCAD SHX Text
%%UKEYNOTES
AutoCAD SHX Text
PROVIDE SERVICE CLEARANCE PER NEC.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
%%UGENERAL NOTES
AutoCAD SHX Text
1. REF. LINES SHALL NOT EXCEED 150 FT REF. LINES SHALL NOT EXCEED 150 FT EQUIVALENT LENGTH OR MANF. MAX RUN LENGTH, IN FIELD VERIFY. IF REF. LINES REQUIRE MORE THAN 150FT OF EQUIVALENT LENGTH, COORDINATE WITH MANF. TO PROVIDE EXTENDED REFRIGERANT THROW ACCESSORIES TO ACCOMMODATE THE ADDITIONAL FOOTAGE NEEDED. 2. PROVIDE MOTORIZED DAMPER FOR OAU PROVIDE MOTORIZED DAMPER FOR OAU INTAKE. 3. PROVIDE REF. LINE CALKING FOR REF. LINE PROVIDE REF. LINE CALKING FOR REF. LINE PENETRATIONS INTO THE MECHANICAL ROOMS.
AutoCAD SHX Text
PROVIDE UNDERCUT- RESTROOM.
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
AutoCAD SHX Text
B.D.C. REVISIONS
AutoCAD SHX Text 4.18.25
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OWNER REVISIONS
6.15.26
OFFICE
MEN'S
RESTROOM
HALLWAY
HALLWAY
HALLWAY
HALLWAY
MECHANICAL
ROOM
OFFICE
BILLING
OFFICE
OFFICE
ROOM
ELECTRICAL
ROOM
MECHANICAL
ROOM
WOMEN'S
RESTROOM
TOILET
126C
STORAGE
126B
UTILITES
DIRECTOR
126A
ADMINISTRATIVE
ASSISTANT
OFFICE
ASSISTANT
DIRECTOR
OFFICE
OFFICE
ASSISTANT
DIRECTOR
OFFICE
COPY
ROOM
OFFICE
OFFICE
OFFICE
OFFICE
CONFERENCE
ROOM
JANITOR
MEN'S
RESTROOM
WOMEN'S
RESTROOM
BREAK ROOM
RECORDS
OFFICE
OFFICE
STORAGE
TOILET
TOILET
MECHANICAL
ROOM
FIRE RISER
ROOM
CASHIERING
106A
CASHIER
106B
CUSTOMER
SERVICE
LOBBY
3501 Griffin Road
(954) 266-2700 Fx: (954) 266-2701 Ft. Lauderdale, FL 33312 sma@saltzmichelson.com
AR-0009976
SD
REVISIONS
Date:
Checked By:
Drawn By:
Project No.:
EQ
2022-133
Sheff L. Devier III AR0007699
S
T
A
F
L
O
R
I
D
A
S
H
E
DE
V
I
I
R
E
G
I
S
T
E
R
E
D A
R
C
H
I
T
E
C
T
AR0007699
11/17/2023 signed
KAMM CONSULTING PROJECT #: 2022-0686
PROJECT MANAGER: GREG KEMP
Certification of Authorization #8189
Deerfield Beach, Florida 33442 Phone 954.949.2200 Fax 954.949.2201 engineering@kammconsulting.com date
1407 West Newport Center Drive
Rev # Description Date
M2.1B
M
EC
H
AN
IC
AL
P
LA
N
BLDG 67
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
10 TON AIR HANDLER (TWE120A-B)
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
SUCTION
AutoCAD SHX Text
REHEAT
AutoCAD SHX Text
BYPASS
AutoCAD SHX Text
LIQUID
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OACU
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 12X12
AutoCAD SHX Text 12X12
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 22X16
AutoCAD SHX Text 18X16
AutoCAD SHX Text 14X14
AutoCAD SHX Text 18X16
AutoCAD SHX Text 24X16
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text T
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 28X22
AutoCAD SHX Text 24X22
AutoCAD SHX Text 18X28
AutoCAD SHX Text 18X28
AutoCAD SHX Text 18X28
AutoCAD SHX Text 28X22
AutoCAD SHX Text 8X8
AutoCAD SHX Text 8X6
AutoCAD SHX Text 24X18
AutoCAD SHX Text 16X16
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X10
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 16X16
AutoCAD SHX Text 12X12
AutoCAD SHX Text 28X16
AutoCAD SHX Text 28X14
AutoCAD SHX Text 16X14
AutoCAD SHX Text 12X10
AutoCAD SHX Text 18X16
AutoCAD SHX Text 24X20
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 20X14
AutoCAD SHX Text 16X12
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 16X14
AutoCAD SHX Text 24X14
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 28X8
AutoCAD SHX Text 28X10
AutoCAD SHX Text 12X12
AutoCAD SHX Text 16X12
AutoCAD SHX Text 20X14
AutoCAD SHX Text 20X12
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 10X8
AutoCAD SHX Text 12X10
AutoCAD SHX Text 10X8
AutoCAD SHX Text 10X10
AutoCAD SHX Text 12X10
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 14X14
AutoCAD SHX Text 16X14
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AHU-11 DUCT
AutoCAD SHX Text
AHU-10
AutoCAD SHX Text 24X22
AutoCAD SHX Text 18X12
AutoCAD SHX Text 16X12
AutoCAD SHX Text 26X24
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 10X10
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text 28X24
AutoCAD SHX Text 30X28
AutoCAD SHX Text 36X10
AutoCAD SHX Text 42X10
AutoCAD SHX Text 14X12
AutoCAD SHX Text 12X12
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
CC
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 10X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 10X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 8X8
AutoCAD SHX Text 10X10
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X8
AutoCAD SHX Text 16X14
AutoCAD SHX Text 12X12
AutoCAD SHX Text 12X10
AutoCAD SHX Text 12X10
AutoCAD SHX Text 26X20
AutoCAD SHX Text 26X24
AutoCAD SHX Text 26X16
AutoCAD SHX Text 26X18
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 12X12
AutoCAD SHX Text 12X10
AutoCAD SHX Text 10X10
AutoCAD SHX Text 8X6
AutoCAD SHX Text 6X6
AutoCAD SHX Text E/A
AutoCAD SHX Text E/A
AutoCAD SHX Text E/A
AutoCAD SHX Text E/A
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 8X8
AutoCAD SHX Text 8X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AHU-9
AutoCAD SHX Text
AHU-8
AutoCAD SHX Text
AHU-7
AutoCAD SHX Text
AHU-6
AutoCAD SHX Text
AHU-5
AutoCAD SHX Text
AHU-3
AutoCAD SHX Text
AHU-2
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
AHU-10
AutoCAD SHX Text
AHU-11
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text 12X10
AutoCAD SHX Text 12X12
AutoCAD SHX Text 12X12
AutoCAD SHX Text
EVH 660D 24X20
AutoCAD SHX Text
EVH 660D 30X26
AutoCAD SHX Text
EVH 660D 30X20
AutoCAD SHX Text
EVH 660D 40X20
AutoCAD SHX Text 8X6
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 38X18
AutoCAD SHX Text 44X18
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 8X6
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 12X10
AutoCAD SHX Text
POLK BUILDING RENOVATION
AutoCAD SHX Text
CITY OF PEMBROKE PINES
AutoCAD SHX Text
8200 SOUTH PALM DRIVE
AutoCAD SHX Text
PEMBROKE PINES, FLORIDA, 33025
AutoCAD SHX Text
WORK AREA HATCHED
AutoCAD SHX Text
%%UKEY PLAN
AutoCAD SHX Text n.t.s
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
ENTRANCE
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
EXIT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
%%UMECHANICAL PLAN
AutoCAD SHX Text 1/8"=1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
%%UKEYNOTES
AutoCAD SHX Text
PROVIDE SERVICE CLEARANCE PER NEC.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
%%UGENERAL NOTES
AutoCAD SHX Text
1. REF. LINES SHALL NOT EXCEED 150 FT REF. LINES SHALL NOT EXCEED 150 FT EQUIVALENT LENGTH OR MANF. MAX RUN LENGTH, IN FIELD VERIFY. IF REF. LINES REQUIRE MORE THAN 150FT OF EQUIVALENT LENGTH, COORDINATE WITH MANF. TO PROVIDE EXTENDED REFRIGERANT THROW ACCESSORIES TO ACCOMMODATE THE ADDITIONAL FOOTAGE NEEDED. 2. PROVIDE MOTORIZED DAMPER FOR OAU PROVIDE MOTORIZED DAMPER FOR OAU INTAKE. 3. PROVIDE REF. LINE CALKING FOR REF. LINE PROVIDE REF. LINE CALKING FOR REF. LINE PENETRATIONS INTO THE MECHANICAL ROOMS.
AutoCAD SHX Text
PROVIDE UNDERCUT- RESTROOM.
AutoCAD SHX Text
AutoCAD SHX Text
B.D.C. REVISIONS
AutoCAD SHX Text 4.18.25
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OWNER REVISIONS
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
OFFICE
MEN'S
RESTROOM
HALLWAY
ELECTRICAL
ROOM
MECHANICAL
ROOM
MECHANICAL
ROOM
HALLWAY 7
WOMEN'S
RESTROOM
TOILET
126C
STORAGE
126B
UTILITES
DIRECTOR
126A
ADMINISTRATIVE
3501 Griffin Road
(954) 266-2700 Fx: (954) 266-2701 Ft. Lauderdale, FL 33312 sma@saltzmichelson.com
AR-0009976
SD
REVISIONS
Date:
Checked By:
Drawn By:
Project No.:
EQ
2022-133
Sheff L. Devier III AR0007699
S
T
A
F
L
O
R
I
D
A
S
H
E
DE
V
I
I
R
E
G
I
S
T
E
R
E
D A
R
C
H
I
T
E
C
T
AR0007699
11/17/2023 signed
KAMM CONSULTING PROJECT #: 2022-0686
PROJECT MANAGER: GREG KEMP
Certification of Authorization #8189
Deerfield Beach, Florida 33442 Phone 954.949.2200 Fax 954.949.2201 engineering@kammconsulting.com date
1407 West Newport Center Drive
Rev # Description Date
M2.1C
M
EC
H
AN
IC
AL
P
LA
N
BLDG 67
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text
MATCH LINE
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
HEAT WHEEL
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OAU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text 28X18
AutoCAD SHX Text 22X16
AutoCAD SHX Text 32X16
AutoCAD SHX Text 24X16
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 10X10
AutoCAD SHX Text 10X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text 28X22
AutoCAD SHX Text 24X22
AutoCAD SHX Text 18X28
AutoCAD SHX Text 18X28
AutoCAD SHX Text 18X28
AutoCAD SHX Text 28X22
AutoCAD SHX Text 8X8
AutoCAD SHX Text 8X6
AutoCAD SHX Text 24X18
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text 28X16
AutoCAD SHX Text 28X14
AutoCAD SHX Text 24X20
AutoCAD SHX Text E/A
AutoCAD SHX Text E/A
AutoCAD SHX Text 8X8
AutoCAD SHX Text 8X8
AutoCAD SHX Text 6X6
AutoCAD SHX Text 6X6
AutoCAD SHX Text 8X6
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AHU-8
AutoCAD SHX Text T
AutoCAD SHX Text 12X10
AutoCAD SHX Text
EVH 660D 24X20
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
FSD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
10 TON AIR HANDLER (TWE120A-B)
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text
20 TON AIR HANDLER (TWE240B)
AutoCAD SHX Text
AutoCAD SHX Text
AHU
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD SHX Text
AutoCAD SHX Text
AA
AutoCAD…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .