CF2_Division_Reception_Spec.pdf
PDF 9 MB Posted
- Solicitation number
- 2026-059
- Issued by
- Los Angeles County, California
About this file
This is a custom furniture specification document for Mt. San Antonio College's Technology and Health Replacement Building, specifically detailing the CF2 Division Office Reception Counter located on the 4th floor, Suite 4230. The specification outlines one L-shaped reception counter with approximate dimensions of 26'-11" by 8'-2" with varying heights and no power requirements. The document provides comprehensive design details including material selections, finishes, construction methods, and dimensional specifications across multiple detail sheets (I-2.0 and I-2.1). Shop drawings are required for sign-off and approval, and the vendor must conduct site field verification prior to fabrication and coordinate with Mt. SAC's FF&E consultant for design approval, site verification, and installation coordination.
The specification details extensive material and finish requirements including acrylic panels (3FORM VARIA), plastic laminates (Wilsonart in multiple colors and finishes), solid surface countertops (Wilsonart Hot Stone), profile panels (3FORM CREST), and painted finishes (Sherwin Williams). The counter construction includes a plywood substrate, wood studs at 16-inch centers, steel angle supports, and solid surface countertops with 3-inch radius edges. The design incorporates dual swing doors with soft-close hinges, ADA accessibility features, and multiple material zones including toe kicks, base details, and low walls with specific laminate cladding. All specifications reference architectural drawings and require adherence to 3FORM installation recommendations, including 1/16-inch reveals between panels and seamless installation techniques using VHB foam tape.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Prequalification_for_Purchase_of_Custom_Furniture_(FF&E)_Bid.pdf | ||
| Prequalification_Application_(rev_06-2026).pdf | ||
| Written_Specifications.pdf | ||
| FF&E_Phase_II_Schedule.pdf | ||
| CAD_x-1_arch_231128-hh.dwg | DWG drawing | |
| CAD_x-2_arch_231128-HH.dwg | DWG drawing | |
| CF1_SCE_Reception_Spec.pdf | ||
| CAD_1_Furn_Bid_2.dwg | DWG drawing | |
| CT1A_CT1B_Custom_Work_Table.pdf | ||
| WT3_Work_Table.pdf | ||
| RB1_Residential_Bed.pdf | ||
| WT4A_WT4B__Work_Table.pdf | ||
| CAD_4_Furn_Bid_2.dwg | DWG drawing | |
| WT1A_WT1B_Work_Table.pdf | ||
| CAD_2_Furn_Bid_2.dwg | DWG drawing | |
| Furniture_Plan_Color_Coded.pdf | ||
| WT2_Work_Table.pdf | ||
| CAD_x-4_arch_231128_HH.dwg | DWG drawing | |
| Furniture_Log.pdf | ||
| MSR1_Sheet_Rack.pdf | ||
| Custom_Furniture_-_Standard.zip | ZIP file | |
| 00430_Payment_Bond_Revised_Sample.pdf | ||
| 00420_Performance_Bond_Revised_sample.pdf | ||
| Mt._SAC_-_Template_Field_Services_Contract.pdf |
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tevy Snapshot xpdar Text Box
DESIGNATION
xpdar Rectangle xpdar Text Box
CCW2 (RECEPTION COUNTER)
xpdar Line xpdar Line xpdar Rectangle xpdar Text Box
COLOR CODE
xpdar Rectangle
KristenV Text Box
SPECIFICATION DESCRIPTION
KristenV Rectangle
KristenV Text Box
4TH FLOOR - DIVISION OFFICE SUITE 4230
KristenV Text Box
LOCATION
KristenV Rectangle
KristenV Snapshot xpdar Rectangle xpdar Text Box
CF2 - DIVISION OFFICE RECEPTION COUNTER
xpdar Snapshot
Tevy Text Box
CUSTOM FURNITURE CLADDING AND COUNTER
QTY: (1) L-SHAPED PER LAYOUT
OVERALL APPROX. SIZE: 26'-11" X 8'-2"
HEIGHT: VARIES
POWER: NONE
DETAIL REFERENCE: SHEETS I-2.0 AND I-2.1
NOTES:
SHOP DRAWINGS WILL BE REQUIRED FOR SIGN-OFF AND APPROVAL.
VENDOR TO CONDUCT SITE FIELD VERIFICATION
PRIOR TO FABRICATION.
VENDOR COORDINATE WITH MT SAC FF&E CONSULTANT FOR SITE DESIGN APPROVAL, SITE VERIFICATION, AND INSTALLATION COORDINATION.
Tevy Text Box
CONCEPT IMAGE ELEVATION RENDERING OF FRONT COUNTER
Tevy Rectangle
KristenV Line
KristenV Ellipse
KristenV Text Box
CC2
Tevy Line
Tevy Ellipse
Tevy Text Box
CC2
xpdar Line
KristenV Text Box
AP-5
MATERIAL: ACRYLIC PANEL 3FORM VARIA 3/8" TH
COLOR: LID-1119007 DIGITAL PRINT CENTER )CUSTOM IM 12539.N31 R39 N25 N42, IV) + AVALANCE (D01)
FINISH: SANDSTONE SO-599778.1
PL-2
MATERIAL: PLASTIC LAMINATE
COLOR: WILSONART SLATE GREY D91-60
FINISH: MATTE
SS-1
MATERIAL: SOLID SURFACE
COLOR: WILSONART, HOT STONE 9201GS
FINISH: LOW SHEEN
xpdar Text Box
FINISHES
xpdar Rectangle xpdar Rectangle xpdar Text Box
CF2 - DIVISION OFFICE RECEPTION
xpdar Snapshot xpdar Text Box
AP-4
MATERIAL: ACRYLIC PANEL 3FORM VARIA 3/8" TH
COLOR: WOLF N44
FINISH: SANDSTONE BACK
PL-1
MATERIAL: PLASTIC LAMINATE
COLOR: WILSONART DAINTREE 8235K-05
FINISH: TIMBERGRAIN
PP-1
MATERIAL: PROFILE PANEL - 3FORM CREST 3/4" PROFILE 4'0"X 8'0"
COLOR: P-1
xpdar Line xpdar Image xpdar Image xpdar Image xpdar Image xpdar Image xpdar Image xpdar Image xpdar Line xpdar Image
Tevy Text Box
P-1
MATERIAL: SHERWIN WILLIAMS
COLOR: SW 7587 SUN DRIED TOMATO
FINISH: SEMI-GLOSS
C F1
C
U
ST
O M
F U
R N
IT
U
R E
- S C
E
PA
TH
W
AY
S
TE
C
H N
O
LO
G Y
H
EA
LT
H R
EP
LA
C
EM
EN
T
BL
D
G
RECEPTION COUNTER PLAN
client:
approvals:
project title:
DATE:
1 1 0 0 N O R T H G R A N D A V E N U E W A L N U T , C A 9 1 7 8 9 - 1 3 9 9 w w w . m t s a c . e d u 9 0 9 . 2 7 4 . 7 5 0 0
SHEET 2 OF 5
I - 1.1
PROJECT NO.:
FILENAME:
DRAWN BY:
CHECKED BY:
COPYRIGHT:
PAL ID STUDIO, INC.
sheet name:
DATE: APRIL 17, 2026
SCALE: 1/2" = 1'-0" 5 PROFILE PANEL - SIDE SCALE: 3/4" = 1'-0" 1ACRYLIC PANEL - SIDE SCALE: 3/4" = 1'-0" 2STANDING HEIGHT COUNTER SCALE: 3/4" = 1'-0" 3
PROFILE PANEL - SIDE SCALE: 3/4" = 1'-0" 4MATERIALS AND FINISH SPECIFICATIONS
JJJJ
1' -5
'-2
1 2"
4' -0
7'
-6
4' -5
31 2"
6'-9" 2'-0" 3"
2'-6"
2'-3"
8"
JJJJ
1'-5" 11"
PP-1
4" PLYWOOD SUBSTRATE
PAINT GRADE TO MATCH
3FORM CANADIAN GRAY.
3/8" 3FORM RECOMMENDED
ALUMINUM ANGLE.
BEVEL EDGE WITH SEAMLESS
INSTALLATION. USE 3M 4496
VHB FOAM TAPE. USE A 1
16"
REVEAL BETWEEN PANELS
PER 3FORM
RECOMMENDATION.
STOREFRONT GLAZING
BEYOND.
3' -9
ATTACH WOOD SUBSTRATE
TO WALL AND ADJACENT
PROFILE PANEL STRUCTURE.
2"
JJJJ
1'-5" 11"
STOREFRONT GLAZING
BEYOND.
AP-1
FRONT PANEL @
TOP PORTION
(SCE PATHWAYS)
AP-2
FRONT PANEL @
BOTTOM PORTION
(SCE PATHWAYS)
PL-2
6" LAMINATE PLASTIC
BASE.
6"
AP-1 @ TOP CAP AND 6"
SPLASH WITH
CHAMFER EDGE.
6"
2X4 WOOD STUDS
@ 16" ON CENTER.
4" PLYWOOD PANEL ON
BOTH SIDE.
SYSTEMS PANELS BY
OTHER, N.I.C.
PL-2
6" LAMINATE PLASTIC BASE
ANCHORED WOOD BASE TO
FINISHED FLOOR.
@ WORKSTATION
SIDE.
P-1
8"
6"
SS-1 @ COUNTER TOP WITH 3"
RADIUS EDGE.
WOOD BLOCKING
TWO STEEL ANGLE SUPPORT
@ EACH END OF THE
SURFACE COUNTER.
ENCLOSED VOID SPACE
PL-2
6" LAMINATE PLASTIC BASE.
AP-2 FRONT PANEL
BOTTOM PORTION
AP-1 TOP PORTION
(SCE PATHWAYS)
16" REVEAL BETWEEN PANELS PER
3FORM RECOMMENDATION.
AP-1
TOP PORTION
(SCE PATHWAYS)
AP-2
BOTTOM PORTION
(SCE PATHWAYS)
PL-2
6" BASE
SYSTEMS PANELS
BY OTHER, N.I.C.
AP-1 @ TOP CAP AND 6" SPLASH
WITH CHAMFER EDGE.
2'-6"
-4'
-0
7"
3' -2
1 2"
1'-7"
6"
2' -1
0"
3" 2'
-7
2'-6"
SS-1 @ COUNTER TOP WITH 3"
RADIUS EDGE.
TWO STEEL ANGLE SUPPORT
@ EACH END OF THE
SURFACE COUNTER.
PL-2
6" LAMINATE PLASTIC BASE.
AP-2 FRONT PANEL
BOTTOM PORTION
AP-1 TOP PORTION
(SCE PATHWAYS)
16" REVEAL BETWEEN PANELS
PER 3FORM RECOMMENDATION.
SYSTEMS PANELS
BY OTHER, N.I.C.
AP-1
TOP PORTION
(SCE PATHWAYS)
AP-2
BOTTOM PORTION
(SCE PATHWAYS)
AP-1 @ TOP CAP AND 6" SPLASH
WITH CHAMFER EDGE.
SS-1 SOLID SURFACE - WILSONART, HOT STONE 9201GS
(LOW SHEEN)
PL-2 PLASTIC LAMINATE - WILSONART, SLATE GREY
D91-60, MATTE FINISH.
AP-1 ACRYLIC PANEL - 3FORM VARIA 38" THICK, DRIZZLE N42
SANDSTONE BACK
AP-2 ACRYLIC PANEL - 3FORM VARIA 38" THICK, LID -1119007
DIGITAL PRINT CENTER (CUSTOM IM 12539.N52 N20 B17
B34, IV)+ AVALANCHE (D01)
FINISH SANDSTONE (ON THE BACKSIDE) SO-599778.3
PP-1 PROFILE PANEL - 3FORM CREST , 34" PROFILE 4'-0" X 8'-0"
FINISH: CANADIAN GRAY
AP-4
AP-5
PP-2
PL-1 PLASTIC LAMINATE - WILSONART, DAINTREE 8235K-05
TIMBERGRAIN FINISH
PROFILE PANEL - 3FORM CREST , 34" PROFILE 4'-0" X 8'-0"
PAINTED FINISH: P-1
ACRYLIC PANEL - 3FORM VARIA 38", LID -1119007
DIGITAL PRINT CENTER (CUSTOM IM 12539.N31 R39 N25
N42, IV) + AVALANCHE (D01)
FINISH SANDSTONE (ON THE BACKSIDE) SO-599778.1
ACRYLIC PANEL - 3FORM VARIA 38" THICK, WOLF N44
SANDSTONE BACK
P-1 SHERWIN WILLIAMS SW 7585 SUN DRIED TOMATO
FINISH: SEMI-GLOSS
P-2 SHERWIN WILLIAMS SW 9565, FORGED STEEL
FINISH: SEMI-GLOSS
PL-3 PLASTIC LAMINATE - WILSONART, PANNA TESSERE
5049-60, MATTE FINISH
PL-4 PLASTIC LAMINATE - WILSONART, VIRTUAL DESIGN
LIBRARY, TWEEDISH INDIGO Y0514-38,
FINE VELVET FINISH.
PL-5 PLASTIC LAMINATE - WILSONART, NILE MIST D512-60
MATT FINISH (EDGE BANDING -WILSONART D512 NILE
MIST).
P-3 SHERWIN WILLIAMS SW 7605, GALE FORCE
FINISH: SEMI-GLOSS
C F2
C
U
ST
O M
F U
R N
IT
U
R E
- D
IV
IS
IO
N O
FF
IC
E
TE
C H
N O
LO
G
Y
H
EA
LT
H
R
EP
LA
C
EM
EN
T
BL
D G client:
approvals:
project title:
DATE:
1 1 0 0 N O R T H G R A N D A V E N U E W A L N U T , C A 9 1 7 8 9 - 1 3 9 9 w w w . m t s a c . e d u 9 0 9 . 2 7 4 . 7 5 0 0
SHEET 1 OF 5
I - 2.1
PROJECT NO.:
FILENAME:
DRAWN BY:
CHECKED BY:
COPYRIGHT:
PAL ID STUDIO, INC.
sheet name:
DATE: APRIL 17, 2026
LOW WALL @ SWING DOOR SCALE: 3/4" = 1'-0" 1ACRYLIC PANEL WRAP SCALE: 3/4" = 1'-0" 2ADA COUNTER SCALE: 3/4" = 1'-0" 3HALF-HEIGHT SWING DOOR SCALE: 3/4" = 1'-0" 4
MATERIALS AND FINISH SPECIFICATIONSHINGE DOOR DETAIL 5SWING DOOR PLAN DETAIL SCALE: N.T.S. 6 SCALE: N.T.S.
PL-1
@ LOW WALL ON
WORKSTATION SIDE
SYSTEMS PANELS
@ 32" A.F.F. ALONG ADA
COUNTER BY OTHER, N.I.C.
SYSTEMS PANELS @ 42" A.F.F.
BY OTHER, N.I.C.
AP-4 TOP PORTION
(DIVISION OFFICE)
AP-5 BOTTOM PORTION
(DIVISION OFFICE)
1' -3
2'
-9
@ TOE KICK - BASEPL-2
3' -6
8"
SOLID CORE LAMINATE
SWING DOOR WITH HEAVY
DUTY EUROPEAN HINGE AND
LATCH ON RECEPTION SIDE
PL-1@ LOW WALL
PL-1@ WALL CAP
PL-1 @ LOW WALL
@ TOE KICK - BASE PL-2
PL-2 @ TOE KICK - BASE
2' -1
0"
2" 6"
2' -2
SS-1 @ COUNTER TOP
3' -6
SYSTEMS PANELS @ 42" A.F.F.
BY OTHER, N.I.C.
SYSTEMS PANELS
@ 32" A.F.F. ALONG ADA
COUNTER BY OTHER, N.I.C.
PP-2 UNDER
COUNTER BASE
@ TOE KICK - BASEPL-2
PL-1
@ LOW WALL ON
WORKSTATION SIDE
SS-1 SOLID SURFACE - WILSONART, HOT STONE 9201GS
(LOW SHEEN)
PL-2 PLASTIC LAMINATE - WILSONART, SLATE GREY
D91-60, MATTE FINISH.
AP-1 ACRYLIC PANEL - 3FORM VARIA 38" THICK, DRIZZLE N42
SANDSTONE BACK
AP-2 ACRYLIC PANEL - 3FORM VARIA 38" THICK, LID -1119007
DIGITAL PRINT CENTER (CUSTOM IM 12539.N52 N20 B17
B34, IV)+ AVALANCHE (D01)
FINISH SANDSTONE (ON THE BACKSIDE) SO-599778.3
PP-1 PROFILE PANEL - 3FORM CREST , 34" PROFILE 4'-0" X 8'-0"
FINISH: CANADIAN GRAY
AP-4
AP-5
PP-2
PL-1 PLASTIC LAMINATE - WILSONART, DAINTREE 8235K-05
TIMBERGRAIN FINISH
PROFILE PANEL - 3FORM CREST , 34" PROFILE 4'-0" X 8'-0"
PAINTED FINISH: P-1
ACRYLIC PANEL - 3FORM VARIA 38", LID -1119007
DIGITAL PRINT CENTER (CUSTOM IM 12539.N31 R39 N25
N42, IV) + AVALANCHE (D01)
FINISH SANDSTONE (ON THE BACKSIDE) SO-599778.1
ACRYLIC PANEL - 3FORM VARIA 38" THICK, WOLF N44
SANDSTONE BACK
P-1 SHERWIN WILLIAMS SW 7585 SUN DRIED TOMATO
FINISH: SEMI-GLOSS
P-2 SHERWIN WILLIAMS SW 9565, FORGED STEEL
FINISH: SEMI-GLOSS
PL-3 PLASTIC LAMINATE - WILSONART, PANNA TESSERE
5049-60, MATTE FINISH
PL-4 PLASTIC LAMINATE - WILSONART, VIRTUAL DESIGN
LIBRARY, TWEEDISH INDIGO Y0514-38,
FINE VELVET FINISH.
PL-5 PLASTIC LAMINATE - WILSONART, NILE MIST D512-60
MATT FINISH (EDGE BANDING -WILSONART D512 NILE
MIST).
P-3 SHERWIN WILLIAMS SW 7605, GALE FORCE
FINISH: SEMI-GLOSS
4" PLYWOOD CORE, LAMINATE
ON BOTH SIDES, TOP AND
BOTTOM.
DUAL SWING DOOR WITH
WITH SOFT CLOSE WITH NOT
LOCK.
3' -6
3'-0"
PL-1
HPL-CLAD @ SWING DOOR
AND LOW WALL TOP CAP.
BLUM CONCEALED
HINGE
3' -6
3'-0"
BLUM CONCEALED
HINGE
PL-1
RIGHT SWING
LEFT SWING
HPL-CLAD @ SWING DOOR
AND LOW WALL TOP CAP.
4" PLYWOOD CORE,
LAMINATE ON BOTH
SIDES, TOP AND BOTTOM.
DUAL SWING DOOR WITH
WITH SOFT CLOSE WITH
NOT LOCK.
| Sheets and Views |
| Layout1 |
File details come from the government source that posted it. Updated .