CDRL 1423 A003_SW_Version_Description_OCLPC.pdf
PDF 1 MB Posted
- Attached to
- Oxygen Clean Low Pressure Calibrator
- Solicitation number
- N6426724R0014
About this file
This document is a Contract Data Requirements List (CDRL) template for a Software Version Description related to an oxygen clean low pressure calibrator system. The CDRL requires the contractor to submit a description of any new or updated software/firmware to the Navy at least 15 days prior to installation on systems delivered under the contract. The description must follow the guidance in DI-IPSC-81442A and include the release and version numbers for all software and firmware. Submissions are to be provided before initial operating capability of each system and with any subsequent changes. The Navy will review and provide comments within 15 days and must approve all software versions prior to installation. Distribution of the CDRL is to the Naval Air Warfare Center Aircraft Division in Lakehurst, NJ, Patuxent River, MD, and contractor copies for each unit delivered.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
Draft
DD FORM 1423 (CDRL) Supplemental
BLOCK 14 ENTRY COMPLETE ADDRESS
Draft
| CDRL Template (002).pdf |
| Page 2.pdf |
| Blank Page |
| A_CONTRACT_LINE_ITEM_NO: TBD |
| B_EXHIBIT: A |
| TDP: |
| TM: |
| OTHER: IPSC |
| DSYSTEMITEM: Oxygen Clean Low Pressure Calibrator |
| E_CONTRACTPR_NO: N64267-22-R-XXXX |
| FCONTRACTOR: TBD |
| 1_DATA_ITEM_NO: A003 |
| 2_TITLE_OF_DATA_ITEM: Software Version Description |
| 3_SUBTITLE: Software Version Description |
| 4_AUTHORITY_Data_Acquisit: DI-IPSC-81442A (See Block 16) |
| 5_CONTRACT_REFERENCE: SOW Paragraph: 5.3.4 (See Block 16) |
| 6_REQUIRING_OFFICE: NAWCAD BL31400 |
| 7_DID_250_REQ: XX |
| 8_APP_CODE: A |
| DIST_STATEMENT: A |
| 10_FREQUENCY: (See Block 16) |
| 11_AS_OF_DATE: (See Block 16) |
| 12_DATE_OF_FIRST_SUBMISSI: (See Block 16) |
| 13_DATE_OF_SUBSEQUENT_SUB: (See Block 16) |
| addressee1: Patrick Brannick |
| draft1: 1 |
| reg1: 1 |
| repro1: |
| addressee2: NAWCAD BL31400 |
| draft2: |
| reg2: |
| repro2: |
| addressee3: Cory Barnhouse |
| draft3: 1 |
| reg3: 1 |
| repro3: 0 |
| addressee4: NAWCAD AA14200 |
| draft4: |
| reg4: |
| repro4: |
| addressee5: Heather Loprano |
| draft5: 1 |
| reg5: 1 |
| repro5: 1 |
| addressee6: NAWCAD BL31400 |
| draft6: |
| reg6: |
| repro6: |
| addressee7: Copies with each unit delivered |
| draft7: 0 |
| reg7: 1 |
| repro7: 0 |
| addressee8: |
| draft8: |
| reg8: |
| repro8: |
| addressee9: |
| draft9: |
| reg9: |
| repro9: |
| addressee10: |
| draft10: |
| reg10: |
| repro10: |
| addressee11: |
| draft11: |
| reg11: |
| repro11: |
| addressee12: |
| draft12: |
| reg12: |
| repro12: |
| addressee13: |
| draft13: |
| reg13: |
| repro13: |
| addressee14: |
| draft14: |
| reg14: |
| repro14: |
| addressee15: |
| draft15: |
| reg15: |
| repro15: |
| addressee16: |
| draft16: |
| reg16: |
| repro16: |
| addressee17: |
| draft17: |
| reg17: |
| repro17: |
| addressee18: |
| draft18: |
| reg18: |
| repro18: |
| addressee19: |
| draft19: |
| reg19: |
| repro19: |
| addressee20: |
| draft20: |
| reg20: |
| repro20: |
| addressee21: |
| draft21: |
| reg21: |
| repro21: |
| addressee22: |
| draft22: |
| reg22: |
| repro22: |
| addressee23: |
| draft23: |
| reg23: |
| repro23: |
| addressee24: |
| draft24: |
| reg24: |
| repro24: |
| addressee25: |
| draft25: |
| reg25: |
| repro25: |
| addressee26: |
| draft26: |
| reg26: |
| repro26: |
| addressee27: |
| draft27: |
| reg27: |
| repro27: |
| addressee28: |
| draft28: |
| reg28: |
| repro28: |
| addressee29: |
| draft29: |
| reg29: |
| repro29: |
| addressee30: |
| draft30: |
| reg30: |
| repro30: |
| addressee31: |
| draft31: |
| reg31: |
| repro31: |
| addressee32: |
| draft32: |
| reg32: |
| repro32: |
| addressee33: |
| draft33: |
| reg33: |
| repro33: |
| addressee34: |
| draft34: |
| reg34: |
| repro34: |
| addressee35: |
| draft35: |
| reg35: |
| repro35: |
| addressee36: |
| draft36: |
| reg36: |
| repro36: |
| addressee37: |
| draft37: |
| reg37: |
| repro37: |
| addressee38: |
| draft38: |
| reg38x: |
| repro38: |
| total_draft: 3 |
| reg38t: 4 |
| total_repro: 1 |
| 16_REMARKS: Block 4/5: DI-IPSC-81442A shall be used as guidance and is provided for reference. SOW Paragraph 5.3.4 is mandatory to this requirement. |
Block 8: Prior notification and government approval of all Software Version Description(s) (CDRL A003 subtitle) for each system is required by the government. Contractor shall provide a Software Version Description to the government for review, comment, and approval no later than (NLT) 15 calendar days prior to installation of software and/or firmware revisions to any system. Government comments with or without approval will be provided to the contractor within 15 days of receipt of Software Version Description providing information explained in DI-IPSC-81442A. The firmware and software used to operate each and every calibration standard procured on any individual delivery order under this contract shall be of the same release and version. The contractor shall provide the US Government the release and/or version number of each item of firmware and software included in the calibration standard. No deviation or substitution of firmware and/or software shall be done without the approval of the US Government.
Block 9: DISTRIBUTION STATEMENT C. DISTRIBUTION AUTHORIZED TO U. S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS TO PROTECT PUBLICATIONS REQUIRED FOR OFFICIAL USE OR FOR ADMINISTRATIVE OR OPERATIONAL PURPOSES ONLY. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO NAWCAD METROLOGY AND CALIBRATION OFFICE, ATTN: CALIBRATION STANDARDS MANAGER, NAWCAD, NAS PATUXENT RIVER, BLDG1403, 22113 FORTIN CIRCLE, UNIT 7, PATUXENT RIVER, MD 20670-1118
Block 10/11/12/13: Submission(s) of Software Version Description (s) apply to new systems and shall be provided to the government prior to each software/firmware change to the initial operating capability (IOC) of each system. IOC of a system is defined as its delivery date.
Block 14: Submission in contractor format is acceptable. Electronic format is preferred if in a widely available commercial document format such as MS-Excel or MS Word. Electronic submission of data is also accepted on CD-ROM. Quantity and copies shall be provided IAW CDRL distribution (Block 14). Addressee's POC information provided on CDRL supplemental page 2.
| 17_PRICE_GROUP: |
| ESTIMATED_TOTAL_PRICE: |
| G_PREPARED_BY: Phillip Brown |
| H_DATE: |
| 1_APPROVED_BY: |
| J_DATE: |
| Page: |
| of_pages: |
| Reset: |
| Address Box: Patrick Brannick, patrick.j.brannick.civ@us.navy.mil |
NAWCAD BL31400
JB MDL
Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733
Heather M. Loprano, heather.m.loprano.civ@us.navy.mil NAVAIR Metrology and Calibration
NAWCAD BL31400
JB MDL
Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733
Corry Barnhouse, corry.barnhouse.civ@us.navy.mil
NAVAIR METCAL AA14200
Bldg 1403 22113 Fortin Circle, Unit 7 Patuxent River, MD 20670
File details come from the government source that posted it. Updated .