CDRL 1423 A002_Instrument_Calibration_OCLPC.pdf
PDF 1 MB Posted
- Attached to
- Oxygen Clean Low Pressure Calibrator
- Solicitation number
- N6426724R0014
About this file
This document is a Contract Data Requirements List (CDRL) outlining calibration procedures for an Oxygen Clean Low Pressure Calibrator. The CDRL requires the contractor to submit an Instrument Calibration Procedure for government approval no later than 90 days prior to initial operating capability of the system. The contractor must provide a preliminary draft for review and a final approved version no later than 30 days before operating capability. The procedure must be submitted electronically in MS Word or Excel format with each system delivered under the contract. Distribution of the procedure is restricted to U.S. government agencies and contractors. The Navy is the requiring office, with points of contact provided for the Naval Air Warfare Center Aircraft Division located in Lakehurst, New Jersey and Patuxent River, Maryland.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
Draft
DD FORM 1423 (CDRL) Supplemental
BLOCK 14 ENTRY COMPLETE ADDRESS
Draft
| CDRL Template (002).pdf |
| Page 2.pdf |
| Blank Page |
| A_CONTRACT_LINE_ITEM_NO: TBD |
| B_EXHIBIT: A |
| TDP: |
| TM: |
| OTHER: QCIC |
| DSYSTEMITEM: Oxygen Clean Low Pressure Calibrator |
| E_CONTRACTPR_NO: N64267-22-R-XXXX |
| FCONTRACTOR: TBD |
| 1_DATA_ITEM_NO: A002 |
| 2_TITLE_OF_DATA_ITEM: Instrument Calibration Procedure |
| 3_SUBTITLE: Inspection and Test Plan |
| 4_AUTHORITY_Data_Acquisit: DI-QCIC-81110 (See Block 16) |
| 5_CONTRACT_REFERENCE: SOW Paragraph: 5.3.3 (See Block 16) |
| 6_REQUIRING_OFFICE: NAWCAD BL31400 |
| 7_DID_250_REQ: XX |
| 8_APP_CODE: A |
| DIST_STATEMENT: C (See Block 16) |
| 10_FREQUENCY: (See Block 16) |
| 11_AS_OF_DATE: (See Block 16) |
| 12_DATE_OF_FIRST_SUBMISSI: (See Block 16) |
| 13_DATE_OF_SUBSEQUENT_SUB: (See Block 16) |
| addressee1: Patrick Brannick |
| draft1: 1 |
| reg1: 1 |
| repro1: |
| addressee2: NAWCAD BL31400 |
| draft2: |
| reg2: |
| repro2: |
| addressee3: Cory Barnhouse |
| draft3: 1 |
| reg3: 1 |
| repro3: 0 |
| addressee4: NAWCAD AA14200 |
| draft4: |
| reg4: |
| repro4: |
| addressee5: Heather Loprano |
| draft5: 1 |
| reg5: 1 |
| repro5: 1 |
| addressee6: NAWCAD BL31400 |
| draft6: |
| reg6: |
| repro6: |
| addressee7: Copies with each unit delivered |
| draft7: 0 |
| reg7: 1 |
| repro7: 0 |
| addressee8: |
| draft8: |
| reg8: |
| repro8: |
| addressee9: |
| draft9: |
| reg9: |
| repro9: |
| addressee10: |
| draft10: |
| reg10: |
| repro10: |
| addressee11: |
| draft11: |
| reg11: |
| repro11: |
| addressee12: |
| draft12: |
| reg12: |
| repro12: |
| addressee13: |
| draft13: |
| reg13: |
| repro13: |
| addressee14: |
| draft14: |
| reg14: |
| repro14: |
| addressee15: |
| draft15: |
| reg15: |
| repro15: |
| addressee16: |
| draft16: |
| reg16: |
| repro16: |
| addressee17: |
| draft17: |
| reg17: |
| repro17: |
| addressee18: |
| draft18: |
| reg18: |
| repro18: |
| addressee19: |
| draft19: |
| reg19: |
| repro19: |
| addressee20: |
| draft20: |
| reg20: |
| repro20: |
| addressee21: |
| draft21: |
| reg21: |
| repro21: |
| addressee22: |
| draft22: |
| reg22: |
| repro22: |
| addressee23: |
| draft23: |
| reg23: |
| repro23: |
| addressee24: |
| draft24: |
| reg24: |
| repro24: |
| addressee25: |
| draft25: |
| reg25: |
| repro25: |
| addressee26: |
| draft26: |
| reg26: |
| repro26: |
| addressee27: |
| draft27: |
| reg27: |
| repro27: |
| addressee28: |
| draft28: |
| reg28: |
| repro28: |
| addressee29: |
| draft29: |
| reg29: |
| repro29: |
| addressee30: |
| draft30: |
| reg30: |
| repro30: |
| addressee31: |
| draft31: |
| reg31: |
| repro31: |
| addressee32: |
| draft32: |
| reg32: |
| repro32: |
| addressee33: |
| draft33: |
| reg33: |
| repro33: |
| addressee34: |
| draft34: |
| reg34: |
| repro34: |
| addressee35: |
| draft35: |
| reg35: |
| repro35: |
| addressee36: |
| draft36: |
| reg36: |
| repro36: |
| addressee37: |
| draft37: |
| reg37: |
| repro37: |
| addressee38: |
| draft38: |
| reg38x: |
| repro38: |
| total_draft: 3 |
| reg38t: 4 |
| total_repro: 1 |
| 16_REMARKS: Block 4/5: DI-QCIC-81110 and SOW Paragraph 5.3.3 shall be used as guidance and are provided for reference. |
Block 8: Instrument Calibration Procedure (CDRL A002 subtitle) for each system requires government approval. Contractor shall provide a preliminary draft to the government for review, comment, and approval no later than (NLT) 90 calendar days prior to initial operating capability (IOC). IOC shall be defined as the delivery date of the initial order of system(s). Government will provide the contractor with approval/disapproval of content and/or format including comments within 15 days of receipt of preliminary draft. Contractor shall provide a government approved final version with incorporated comments NLT 30 days prior to IOC of each system.
Block 9: DISTRIBUTION STATEMENT C. DISTRIBUTION AUTHORIZED TO U. S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS TO PROTECT PUBLICATIONS REQUIRED FOR OFFICIAL USE OR FOR ADMINISTRATIVE OR OPERATIONAL PURPOSES ONLY. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO NAWCAD METROLOGY AND CALIBRATION OFFICE, ATTN: CALIBRATION STANDARDS MANAGER, NAWCAD, NAS PATUXENT RIVER, BLDG1403, 22113 FORTIN CIRCLE, UNIT 7, PATUXENT RIVER, MD 20670-1118
Block 10/11/12/13: Submissions shall be provided with each System delivered as specified in the delivery schedule of the contract.
Block 14: Submission in contractor format is acceptable. Electronic format is desired and acceptable if in MS-Excel or MS Word. Electronic submission of data shall also be on CD-ROM. Quantity and copies shall be provided IAW CDRL distribution (Block 14). Addressee's POC information provided on CDRL supplemental page 2.
| 17_PRICE_GROUP: |
| ESTIMATED_TOTAL_PRICE: |
| G_PREPARED_BY: Phillip Brown |
| H_DATE: |
| 1_APPROVED_BY: |
| J_DATE: |
| Page: |
| of_pages: |
| Reset: |
| Address Box: Patrick Brannick, patrick.j.brannick.civ@us.navy.mil |
NAWCAD BL31400
JB MDL
Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733
Heather M. Loprano, heather.m.loprano.civ@us.navy.mil NAVAIR Metrology and Calibration
NAWCAD BL31400
JB MDL
Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733
Corry Barnhouse, corry.barnhouse.civ@us.navy.mil
NAVAIR METCAL AA14200
Bldg 1403 22113 Fortin Circle, Unit 7 Patuxent River, MD 20670
File details come from the government source that posted it. Updated .