B-1_CLN-1_38KC113601_A01TGI_c0v0.pdf
PDF 138 KB Posted
- Attached to
- USS SHOUP (DDG-86) 5J1 SIA (Yokosuka, JAPAN)
- Solicitation number
- N6264925RA020
About this file
This Task Group Instruction (TGI) details work requirements for replacing the nonskid system on the USS SHOUP (DDG-86) during its FY25 5J1 Selected Industrial Availability (SIA) in Yokosuka, Japan. The work involves replacing approximately 3,055 square feet of nonskid system on the 01 Level deck plating between frames 202 and 329, port and starboard sides, including vertical surfaces up to 4 inches from the deck. The work must conform to MIL-PRF-24667, Type V, Composition G specifications.
The TGI specifies that power tool cleaning to bare metal is required for vertical surfaces following SSPC-SP 11 standards. SRF-JRMC will provide support services including crane operations, electrical utilities, water and steam supply, safety inspections, gas-free inspections, and QA inspections. The work is being contracted on a Firm-Fixed-Price basis, with pricing to be submitted in Japanese Yen (conversion rate of 145.7323 JPY per USD specified for FY25 budget purposes). The contractor must provide detailed pricing using the Price Proposal Breakdown Sheet specified in Section J ATTACHMENT II of solicitation N6264925RA020.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FOUO
WebAIM Short Form TASK GROUP INSTRUCTION
08-JAN-2025 1327
20.14.15.2.9020 (September 2024) ICN: 38KC113601 KeyOp: A01
COMPONENT NAME: TYPE: PHASE: REPEAT: CHG/VER:TGI NO: NONSKID ON MIDSHIP AY A 0 0/0
SHIP/HULL NO: SHIP/HULL NAME: PROJECT: SYSTEM: PLANT ID: CASREP CAT:
DDG-86 USS SHOUP KC1
CU PHASE TITLE: *F/O - REPLACE NONSKID SYSTEM ON 01 LEVEL FR BETWEEN 202 AND 329, PORT AND STBD
WORK CERTIFICATION SIGNATURES: DLs
COMPLETION OF WORK REVIEW: BADGE NO: SHOP/CODE: PHONE: DATE:
RECORDS REVIEW: BADGE NO: SHOP/CODE: PHONE: DATE:
FOUO Pg 1 of 3
OD01L089
PREPARING ACTIVITY: STATUS: APP WORKING STATUS:
PREPARED BY: CODE: PHONE: DATE:
KANO, DAISUKE 231A 3152430098 02-DEC-2024
APPROVED BY: CODE: PHONE: DATE:
NANBA, RYOUSUKE 231A 3152436141 02-DEC-2024
CONCURRED BY: CODE: PHONE: DATE:
REASON FOR WORK/NEED FOR CHANGE:
JCN:
OD01-L089
SPECIAL REQUIREMENTS:
CU PHASE DESCRIPTION:
ZONE MANAGER: ZONE: COMPARTMENT: LEVEL: FRAME: SIDE:
YAGINUMA, TAKEHIDE
JOB SUMMARY ID: TOT MAN HR.: TOT DUR: TOT JML COST: PLANNING ACCEPTANCE:
136A0001
1. SCOPE/PURPOSE:
1.1 Title: Nonskid System on 01 Level Frames between 202 and 329, Port and Starboard (Stbd); replace
1.2 Location of Work:
1.2.1 01 Level Weather, Frames between 202 and 329, Port and Stbd
1.3 Identification:
1.3.1 Quantity (3,055 SF), 01 Level Deck Plating, Frames between 202 and 329, including vertical surface up to height of 4 inches from deck in and around nonskid deck area, Port and Stbd
Remarks: The area excepts where rubber tile is installed.
1.4 Security Classification: None.
TGI Short Form
08-JAN-2025 1327
20.14.15.2.9020 (September 2024) (Continued) ICN: 38KC113601 KeyOp: A01
COMPONENT NAME: TYPE: PHASE: REPEAT: CHG/VER:TGI NO: NONSKID ON MIDSHIP AY A 0 0/0
SHIP/HULL NO: SHIP/HULL NAME: PROJECT: SYSTEM: PLANT ID: CASREP CAT:
DDG-86 USS SHOUP KC1
CU PHASE TITLE: *F/O - REPLACE NONSKID SYSTEM ON 01 LEVEL FR BETWEEN 202 AND 329, PORT AND STBD
FOUO Pg 2 of 3
CU PHASE DESCRIPTION (Cont.)
Ref.
No.
Document/Drawing Number DOCUMENT/DRAWING TITLE REV
CHG
NO.
CPY
REQ PARAGRAPH SECT PG CHPT
1.5 Initial Condition: None.
1.6 Contractor work start date: See TGI POP List
1.7 Contractor work completion date: See TGI POP List
2. PROCEDURE:
2.1 Accomplish the requirements of 009-32 of Ref. No. One, including Table 2, Line(s) 21, for each area listed in 1.3.1.
Application of nonskid system must conform to MIL-PRF-24667, Type V, Composition G.
2.1.1 Power tool clean to bare metal for each vertical surface. Accomplish each requirement of Surface Preparation Specification SSPC-SP 11 of Ref. No. 3.
2.2 Notes:
2.2.1 Planner: Code 231A D. Kano, 243-0098
2.2.2 Work Integration Manager (WIM): Code 333 T. Yaginuma, 080-5419-0598
2.2.3 JCN OD01-L089 is related to this TGI.
2.3 Government Furnished Material (GFM): None.
2.4 SRF-JRMC will provide the following service work: (TGI No. 38KC113601S02)
2.4.1 [C740] Crane and crane rigging service.
2.4.2 [X99E] Utility service, electrical.
2.4.3 [X99M] Utility service, including water supply and steam supply.
2.4.4 [C106.1] Safety inspection for SRF-JRMC employees.
2.4.5 [C106.2] Gas free inspection for SRF-JRMC employees.
2.4.6 [C133] QA inspection for (G) symbol(s).
08-JAN-2025 1327
20.14.15.2.9020 (September 2024) (Continued) ICN: 38KC113601 KeyOp: A01
COMPONENT NAME: TYPE: PHASE: REPEAT: CHG/VER:TGI NO: NONSKID ON MIDSHIP AY A 0 0/0
SHIP/HULL NO: SHIP/HULL NAME: PROJECT: SYSTEM: PLANT ID: CASREP CAT:
DDG-86 USS SHOUP KC1
CU PHASE TITLE: *F/O - REPLACE NONSKID SYSTEM ON 01 LEVEL FR BETWEEN 202 AND 329, PORT AND STBD
FOUO Pg 3 of 3
Ref.
No.
Document/Drawing Number DOCUMENT/DRAWING TITLE REV
CHG
NO.
CPY
REQ PARAGRAPH SECT PG CHPT
1 NSI FY-25 NAVSEA Standard Items - 1 N 2 LI FY-25 Local Standard Items - ORG N
3 TM SYSTEMS &
SPECIFICATIONS
SSPC Painting Manual Volume
- N
MATERIAL LIST
ITEM
NO.
PC
NO.
REF
NO.
M
C DESCRIPTION
STOCK
NUMBER
GENERIC
MATL
TYPE LVL QA
HAZ
MAT
DOC
NO.
QTY
REQD/
UNIT
QTY
USED/
UNIT
MATERIAL REFERENCES
REF
NO.
DOCUMENT/DRAWING NUMBER DOCUMENT/DRAWING TITLE
REV
ICN: 38KC113601 KEY OP: A01
File details come from the government source that posted it. Updated .