Attch G - Price Proposal Form.docx

ATTACHMENT FG – PRICE PROPOSAL FORM

1.1 CONTRACT LINE ITEMS

The terms Offeror and Bidder and versions thereof (offer/bid) have the same definition as used within this contract.

Provide the CLIN lump sum price for the following items:

CLIN 001 – Berth 13 Structural Repairs BASE PRICE: Price includes the following:

Price for the Total Amount for CLIN 001 shall provide the full project scope, excluding Bid Options (CLIN 002 through 006), complete and in place in accordance with the drawings and specifications even if not specifically listed below.

00101: Topside Repairs:

Price for provision of all work at the topside along Berths 12, 13, and at the southwest corner of Dry Dock No. 3.

Basis of Bid for CLIN 00101 shall be the Total Amount for CLIN 00101, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

specifications for CLIN 00101 but not including the work indicated or specified under 00101b to 00101l.

LS

Total 00101 (00101a – 00101l): $

00102: Berth 13 Under Deck Repairs:

Price for provision of all work under the deck along Berth 13, and at the southwest corner of Dry Dock No. 3.

Basis of Bid for CLIN 00102 shall be the Total Amount for CLIN 00102, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

specifications for CLIN 00102 but not including the work indicated or specified under 00102b to 00102k.

Total 00102 (00102a – 00102k): $

00103: Berth 13B Pile Repairs:

Price for provision of all work at the under deck piles along Berth 13B.

Basis of Bid for CLIN 00103 shall be the Total Amount for CLIN 00103, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

specifications for CLIN 00103 but not including the work indicated or specified under 00103b to 00103f.

Total 00103 (00103a – 00103f): $

CLIN 002 – OPTION 1, Berth 13A Pile Repairs:

Price for provision of all work at the under deck piles along Berth 13A and at the southwest corner of Dry Dock No. 3.

Basis of Bid for CLIN 002 shall be the Total Amount for CLIN 002, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

TOTAL CLIN 002 (002a – 002c): $

CLIN 003 – OPTION 2, Berth 12 Pile Repairs:

Price for provision of all work at the under deck piles along Berth 12.

Basis of Bid for CLIN 003 shall be the Total Amount for CLIN 003, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

TOTAL CLIN 003 (003a – 003f): $

CLIN 004 – OPTION 3, Berth 12 Under Deck Beam and Pile Cap Repairs:

Price for provision of all work at under the deck along Berth 12.

Basis of Bid for CLIN 004 shall be the Total Amount for CLIN 004, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

TOTAL CLIN 004 (004a – 004d): $

CLIN 005 – OPTION 4, FRE Conduits between Bents 63 and 64:

Price for provision of all work associated with furnishing and installing two (2) FRE conduits below deck between Bents 63 and 64.

TOTAL CLIN 005: $

CLIN 006 – OPTION 5, Under Deck Repairs at Various Locations:

Price for provision of all work repair work under the deck along Berths 12, 13, and at the southwest corner of Dry Dock No. 3 at locations identified and approved by the Contracting Officer.

Basis of Bid for CLIN 006 shall be the Total Amount for CLIN 006, but not including the work indicated or specified to be provided under any other CLIN.

QUANTITY

TOTAL CLIN 006 (006a – 006d): $

Explanation of Bid Items

Total amount of Base Amount CLIN 001 shall provide the full project scope, excluding Bid Options defined below, complete in place in accordance with the drawings and specifications even if not specifically listed. Explanation of specific work items as defined as follows:

CLIN 00101: Topside Repairs - includes all Base Bid Work not included in CLIN 00102 and 00103 and includes but is not limited to construction of topside structural spall repairs, crack repairs, full depth deck replacement, landside fascia beam repairs, approach slab, expansion joint repairs, crane and train rail repairs; providing construction permitting fees and environmental mitigation, and all incidental and related work.

00101a: All work complete in accordance with the drawings and specifications for CLIN 00101 but not including the work indicated or specified under 00101b through 00101l.

00101b: Type A Topside Surface Spall Repair includes the price for all work associated with the repair of surfaces up to 1-1/2" deep. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, patching and curing, and all incidental and related work.

00101c: Type B Topside Deep Spall Repair includes the price for all work associated with the repair of surfaces greater than 1-1/2" deep. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, supplemental reinforcing (except drilling and grouting dowels), patching and curing, and all incidental and related work.

00101d: Type D Topside Crack Repair includes the price for all work associated with the repair of cracks in the topside of the deck. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for routing the crack, cleaning, surface preparation, patching/sealing the crack, and all incidental and related work.

00101e: Type G Full Depth Deck Replacement includes the price for all work associated with the full depth replacement of the deck. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing, concrete, fabrication and installation of deck drains, curing, and all incidental and related work.

00101f: Type FA Landside Fascia Beam Repair with Approach Slab includes the price for all work associated with the repair of the landside fascia beam, deck extension and approach slab. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, bituminous pavement removal, local demolition, excavation, disposal of removed material, surface preparation, anchor rods, bulkhead repair, concrete, reinforcing, drilling and grouting dowels, patching and curing, filter fabric, backfill, pavement restoration, and all incidental and related work.

00101g: Type FB Landside Fascia Beam Repair includes the price for all work associated with the repair of the landside fascia beam, and deck extension. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, bituminous pavement removal, local demolition, excavation, disposal of removed material, surface preparation, anchor rods, bulkhead repair, concrete, reinforcing, drilling and grouting dowels, patching and curing, filter fabric, backfill, pavement restoration, and all incidental and related work.

00101h: Expansion Joint Repair includes the price for all work associated with the repair of the deck expansion joint between Bents 51 and 52. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, removal of timber curb, disposal of removed material, surface preparation, removal and resetting of tapered expansion rail at rails R1 and R4, rail base plates, rail clips, joint bars, removal of tapered rails at rails R2 and R3, armored joint, concrete, reinforcing, galvanic anodes, drilling and grouting dowels, patching and curing, timber curb, and all incidental and related work.

00101i: Crane Rail Clip Replacement includes provision of all work associated with replacing deteriorated clips for crane rail including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated clips, cleaning, surface preparation, and installation of the clips, nuts, stud bolts, and all incidental and related work. Replacement of rail clips damaged as a result of the contractor’s demolition will not be measured and paid for separately.

00101j: Crane Rail Base Plate Replacement includes provision of all work associated with replacing deteriorated base plates for crane rail including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated plates, demolition of grout, disposal of removed material, cleaning, surface preparation, installation of the plates, non-shrink grout, and all incidental and related work. Replacement of rail base plates damaged as a result of the contractor’s demolition will not be measured and paid for separately.

00101k: Crane Rail Joint Bar Replacement includes provision of all work associated with replacing deteriorated joint bars for crane rail (except for joints bars that are included as part of the expansion joint repair) including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated joint bars, cleaning, surface preparation, and installation of the joint bars, bolts, nuts, stud bolts, and all incidental and related work. Replacement of rail joint bars damaged as a result of the contractor’s demolition will not be measured and paid for separately.

001011: Drilling and Grouting Dowels for Type B Repairs includes provision of all work associated with drilling and grouting #4 reinforcing bars at Type B Repairs to replace deteriorated reinforcing including but not limited to furnishing labor, materials, tools, equipment and incidentals required for drilling, control and disposal of drill spoil, cleaning, surface preparation, epoxy, and reinforcing, and all incidental and related work. Drilling and grouting reinforcing at Type BU are not included in 00101l. Drilling and grouting reinforcing at all other repairs, including but not limited to Type CU, Expansion Joint Replacement, Duct Banks, and Type K repairs that are not Type B are not included in 00101l and will not be measured and paid for separately. Drilling and grouting reinforcing to replace or supplement reinforcing damaged or sawcut by the contractor are not included in 00101l and will not be measured and paid for separately.

CLIN 00102: Berth 13 Under Deck Repairs - includes all Base Bid Work not included in CLIN 00101 and 00103 and includes but is not limited to construction of under deck structural spall repairs, deck beam and pile cap bottom flange repairs, pile cap extension spall repairs, under deck crack repairs, reaction frame support brackets, reaction frame steel repairs, duct bank replacement, electrical repairs, mechanical repairs, utility vault repairs and replacement, electrical and mechanical modifications and temporary removal/reinstallation to facilitate topside and below deck structural repairs, from Bent K’ to Bent 74 including repairs marked as “Location to be determined by Contracting Officer”, and all incidental and related work.

00102a: All work complete in accordance with the drawings and specifications for CLIN 00102 but not including the work indicated or specified under 00102b through 00102k.

00102b: Type AU Under Deck Surface Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults up to 1-1/2" deep. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, patching and curing, and all incidental and related work.

00102c: Type BU Under Deck Deep Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults greater than 1-1/2" deep. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing (except drilling and grouting dowels), patching and curing, and all incidental and related work.

00102d: Type CU Under Deck Beam and Pile Cap Bottom Flange Repair includes the price for all work associated with the repair of concrete below and adjacent to the bottom flange of the beams and pile caps. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing, drilling and grouting dowels, patching and curing, and all incidental and related work.

00102e: Type DU Under Deck Crack Repair includes the price for all work associated with the repair of cracks on the underside of the deck, beams, pile caps, duct banks, and utility vaults. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for routing the crack, cleaning, surface preparation, patching/sealing the crack, and all incidental and related work.

00102f: Type E Pile Cap Extension Spall Repair includes the price for all work associated with the repair of concrete surfaces on the waterside end of the pile caps that support the existing W14 edge beam in the steel reaction frame on the underside of the timber deck. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing, concrete, drilling and grouting dowels, anchor bolts, non-shrink grout, patching and curing, and all incidental and related work.

00102g: Type H Reaction Frame Support Brackets includes the price for all work associated with the brackets to support the existing W14 edge beam and other repairs on the steel reaction frame at Berth 13B. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for cleaning the existing W14 edge beam, demolition, disposal of removed material, surface preparation, drilling and grouting anchor rods, steel support brackets, catwalk support and utility support repairs, and all incidental and related work.

00102h: Electrical Repairs includes the price for all work associated with electrical repairs, civil repairs required for ductbank demolition and replacement, and electrical work required to facilitate all the topside and under deck structural and mechanical repairs. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for ductbank demolition, bituminous pavement removal, removal of heat trace, local demolition, temporary support of train rail, excavation, disposal of removed material, cables and wires, equipment pads, reinforced concrete wall patch at steel bulkhead opening where ductbank was demolished, removal and reinstallation of boxes/cabinets/power stations, ductbanks, ductbank hangers, concrete, reinforcing, drilling and grouting dowels, patching and curing, filter fabric, backfill, pavement restoration, conduit couplers/caps/seals, heat trace for wheeler line, and all incidental and related work. Concrete repairs on existing ductbanks to remain are not included in 00102h. FRE conduit and supports are not included in 0102h.

00102i: Mechanical Repairs includes the price for all work associated with the mechanical repairs and mechanical work required to facilitate the topside and under deck structural repairs. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for local demolition, removal of mechanical piping, insulation, jackets, disposal of removed material that will not be reinstalled, reinstallation and replacement of mechanical piping, insulation, jackets, hanger assemblies, steel pipe support frames and anchors, HDPE pipe wrap, pipe mounting supports, pipe guides, expansion joints, and all incidental and related work.

00102j: Drilling and Grouting Dowels for Type BU Repairs includes provision of all work associated with drilling and grouting #4 and #6 reinforcing bars at Type BU Repairs to replace deteriorated reinforcing including but not limited to furnishing labor, materials, tools, equipment and incidentals required for drilling, control and disposal of drill spoil, cleaning, surface preparation, epoxy, and reinforcing, and all incidental and related work. Drilling and grouting reinforcing at Type B are not included in 00102j. Drilling and grouting reinforcing at all other repairs, including but not limited to Type CU, Expansion Joint Replacement, Duct Banks, and Type K repairs that are not Type BU are not included in 00102j and will not be measured and paid for separately. Drilling and grouting reinforcing to replace or supplement reinforcing damaged or sawcut by the contractor are not included in 00102j and will not be measured and paid for separately.

00102k: Type K Utility Vault Floor Replacement includes provision of all work associated with replacing the floor at the utility vault adjacent to Bent 47 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for temporary supporting existing utilities in the vault, saw cutting, demolition of the existing slab, drilling and grouting dowels, control and disposal of drill spoil, cleaning, surface preparation, reinforcing, concrete, restoring utility supports, and all incidental and related work. Concrete repairs on other utility vaults are not included in 00102k.

CLIN 00103: Berth 13B Pile Repairs – includes all Base Bid Work not included in CLIN 00101 and 00102 and includes but is not limited to construction of pile jacket repairs and anode replacement from Bent K’ to Bent 58, and all incidental and related work.

00103a: All work complete in accordance with the drawings and specifications for CLIN 00103 but not including the work indicated or specified under 00103b through 00103g.

00103b: Type 1 Pile Repair includes provision of all work associated with repairing pile jackets from Bent K’ to Bent 58 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and installation of the 4-foot long fiberglass jackets, cementitious grout, and all incidental and related work.

00103c: Type 3 Pile Repair includes provision of all work associated with repairing pile jackets from Bent K’ to Bent 58 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for locally cutting back the existing nylon jacket, removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and grout, and all incidental and related work.

00103d: Type 4 Pile Repair includes provision of all work associated with repairing pile jackets from Bent K’ to Bent 58 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for locally cutting back the existing nylon jacket, removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and installation of the 8-foot long HDPE jackets, cementitious grout, concrete, and all incidental and related work.

00103e: Type 5 Pile Repair includes provision of all work associated with repairing pile jackets from Bent K’ to Bent 58 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for cleaning existing HP piles, disposal of removed material, surface preparation, and installation of the 12-foot long HDPE jackets, stopper band, foam blocks, petrolatum tape, and all incidental and related work.

00103g: Pile Anode Replacement includes provision of all work associated with replacing pile anodes from Bent K’ to Bent 58 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for underwater dive inspection of existing piles, removal and disposal of existing depleted anodes, cleaning piles for welding, aluminum anodes, welding, and all incidental and related work.

1.2 Explanation of Bid Options:

Explanation of Bid Options

CLIN 002: Option 01 – Berth 13A Pile Repairs includes the added price for all work associated with pile jacket repairs and anode replacement from Bent 59 to Bent 74, and all incidental and related work.

002a: Type 3 Pile Repair includes provision of all work associated with repairing pile jackets from Bent 59 to Bent 74 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for locally cutting back the existing nylon jacket, removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and grout, and all incidental and related work.

002b: Type 5 Pile Repair includes provision of all work associated with repairing pile jackets from Bent 59 to Bent 74 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for cleaning existing HP piles, disposal of removed material, surface preparation, and installation of the 12-foot long HDPE jackets, stopper band, foam blocks, petrolatum tape, and all incidental and related work.

002c: Pile Anode Replacement includes provision of all work associated with replacing pile anodes from Bent 59 to Bent 74 including but not limited to furnishing labor, materials, tools, equipment and incidentals required for underwater dive inspection of existing piles, removal and disposal of existing depleted anodes, cleaning piles for welding, aluminum anodes, welding, and all incidental and related work.

CLIN 003: Option 02 – Berth 12 Pile Repairs includes the added price for all work associated with pile jacket repairs and anode replacement from Bent D’ to Bent J”, and all incidental and related work.

003a: Type 1 Pile Repair includes provision of all work associated with repairing pile jackets from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and installation of the 4-foot long fiberglass jackets, cementitious grout, and all incidental and related work.

003b: Type 2 Pile Repair includes provision of all work associated with repairing pile jackets from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and installation of the 8-foot long fiberglass jackets, cementitious grout, and all incidental and related work.

003c: Type 3 Pile Repair includes provision of all work associated with repairing pile jackets from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for locally cutting back the existing nylon jacket, removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and grout, and all incidental and related work.

003d: Type 4 Pile Repair includes provision of all work associated with repairing pile jackets from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for locally cutting back the existing nylon jacket, removal of deteriorated concrete, disposal of removed material, cleaning, surface preparation, and installation of the 8-foot long HDPE jackets, cementitious grout, concrete, and all incidental and related work.

003e: Type 5 Pile Repair includes provision of all work associated with repairing pile jackets from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for cleaning existing HP piles, disposal of removed material, surface preparation, and installation of the 12-foot long HDPE jackets, stopper band, foam blocks, petrolatum tape, and all incidental and related work.

003f: Pile Anode Replacement includes provision of all work associated with replacing pile anodes from Bent D’ to Bent J” including but not limited to furnishing labor, materials, tools, equipment and incidentals required for underwater dive inspection of existing piles, removal and disposal of existing depleted anodes, cleaning piles for welding, aluminum anodes, welding, and all incidental and related work.

CLIN 004: Option 03 – Berth 12 Under Deck Beam and Pile Cap Repairs from Bent D’ to Bent J” includes the added price for all work associated with construction of under deck structural spall repairs, deck beam and pile cap bottom flange repairs, under deck crack repairs, and all incidental and related work.

004a: Type AU Under Deck Surface Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults up to 1-1/2" deep from Bent D’ to Bent J”. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, patching and curing, and all incidental and related work.

004b: Type BU Under Deck Deep Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults greater than 1-1/2" deep from Bent D’ to Bent J”. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing (except drilling and grout dowels), patching and curing, and all incidental and related work.

004c: Type CU Under Deck Beam and Pile Cap Bottom Flange Repair includes the price for all work associated with the repair of concrete below and adjacent to the bottom flange of the beams and pile caps from Bent D’ to Bent J”. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing, drilling and grouting dowels, patching and curing, and all incidental and related work.

004d: Drilling and Grouting Dowels for Type BU Repairs includes provision of all work associated with drilling and grouting #4 and #6 reinforcing bars at Type BU Repairs to replace deteriorated reinforcing including but not limited to furnishing labor, materials, tools, equipment and incidentals required for drilling, control and disposal of drill spoil, cleaning, surface preparation, epoxy, and reinforcing, and all incidental and related work. Drilling and grouting reinforcing at Type B are not included in 004e. Drilling and grouting reinforcing at all other repairs, including but not limited to Type CU, Expansion Joint Replacement, Duct Banks, and Type K repairs that are not Type BU are not included in 004e and will not be measured and paid for separately. Drilling and grouting reinforcing to replace or supplement reinforcing damaged or sawcut by the contractor are not included in 004e and will not be measured and paid for separately.

CLIN 005: Option 04 – FRE Conduits between Bents 63 and 64 includes the added price for all work associated with furnishing and installing FRE conduit, underdeck supports and anchors, penetration through existing deck, insulated cap, penetration and seal through bulkhead, concrete core thru existing MH-318B, sealing MH wall penetration, and all incidental and related work.

CLIN 006: Option 05 – Under Deck Repairs at Various Locations includes the added price for all work associated with under the deck repairs along Berths 12, 13, and the southwest corner of Dry Dock No. 1 at locations identified by the Contracting Officer including but not limited to construction of under deck structural spall repairs, deck beam and pile cap bottom flange repairs, electrical and mechanical modifications and temporary removal/reinstallation to facilitate the structural repairs, and all incidental and related work. The CLIN 006 repairs are not identified on the under deck structural repair plans or the beam repair schedule on the drawings. The repairs included in the repair schedule, noted as “location to be determined by contracting officer” are Base Bid work included in CLIN 001 and those repair quantities are not included as part of CLIN 006.

006a: Type AU Under Deck Surface Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults up to 1-1/2" deep at locations identified by the Contracting Officer. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, patching and curing, and all incidental and related work.

006b Type BU Under Deck Deep Spall Repair includes the price for all work associated with the repair of surfaces on the underside of the deck, sides of beams and pile caps, duct banks, and utility vaults greater than 1-1/2" deep at locations identified by the Contracting Officer. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing (except drilling and grouting dowels), patching and curing, and all incidental and related work.

006c: Type CU Under Deck Beam and Pile Cap Bottom Flange Repair includes the price for all work associated with the repair of concrete below and adjacent to the bottom flange of the beams and pile caps at locations identified by the Contracting Officer. Work includes but is not limited to furnishing labor, materials, tools, equipment and incidentals required for saw cutting, local demolition, disposal of removed material, surface preparation, reinforcing, drilling and grouting dowels, patching and curing, and all incidental and related work.

006d: Drilling and Grouting Dowels for Type BU Repairs includes provision of all work associated with drilling and grouting #4 and #6 reinforcing bars at Type BU Repairs to replace deteriorated reinforcing including but not limited to furnishing labor, materials, tools, equipment and incidentals required for drilling, control and disposal of drill spoil, cleaning, surface preparation, epoxy, and reinforcing, and all incidental and related work. Drilling and grouting reinforcing at Type B are not included in 006d. Drilling and grouting reinforcing at all other repairs, including but not limited to Type CU, Expansion Joint Replacement, Duct Banks, and Type K repairs that are not Type BU are not included in 006d and will not be measured and paid for separately. Drilling and grouting reinforcing to replace or supplement reinforcing damaged or sawcut by the contractor are not included in 006d and will not be measured and paid for separately.

1.4 GENERAL NOTES

1. Submit offers using this Price Proposal Form and these Notes.

1. Except when it is determined in accordance with FAR 17.206 (b) not to be in the Government's best interest, the Government will evaluate offers for award purposes by adding the price for CLINs 0002 through 006 to the total price for CLIN 001. In accordance with FAR 52.217-5, evaluation of options will not obligate the Government to exercise the option(s).

1. The Government may reject an offer as non-responsive if it is materially unbalanced as to prices for the basic requirement and the option quantities. An offer is unbalanced when it is based on prices significantly less than cost for some work and prices which are significantly overstated for other work.

1. A firm-fixed proposed price is required for all CLINs. No provision is made for economic price adjustment.

1. The Government reserves the unilateral right to award CLINs 002 through 006 to the Contractor at the proposed price within three hundred sixty-five (365) calendar days after contract award.

1. The performance period for the work required by base price shall be 700 (seven hundred) calendar days from the date of award (includes 15 days for submission and approval of required bonds and insurance). If any or all of CLINs 002 through CLIN 006 are exercised, the contract completion date remains the same as that of the base price work (CLIN 001), as the work required by these options can be performed concurrent to the base work.

---END---

F-14