Attachment_J.10 - DCC Furniture and Furnishings Standards.pdf

D I S T R I C T O F C O L U M B I A C O U R T S

F U R N I T U R E a n d F U R N I S H I N G S S T A N D A R D S

V.1 - MAY 2025

CAPITAL PROJECTS & FACILITIES

MANAGEMENT DIVISION

1. Introduction & Overview

2. DCC Furniture Standards A. Preferred Furniture Manufacturers B. Furniture Finish Matrix C. Office Technical Specifications

1. Chambers Suite – Associate Judge

2. Office Typical C

3. Office Typical D1

4. Office Typical D

5. Office Typical E

6. Office Finishes and Electrical Requirements

D. Workstation Technical Specifications

1. Workstation Typical F

2. Workstation Typical G

3. Workstation Typical H

4. Workstation Finishes and Electrical

Requirements

5. Workstation Electrical Wiring Diagram

3. Appendix A. Reference Furniture Photos

B. Document Version Log

C O N T E N T S

1. INTRODUCTION & OVERVIEW

▪ The purpose of this document is to provide comprehensive guidance for the development of the programmatic design and specification of furniture within the District of Columbia Courts

(DCC) workspaces. This Furniture and Furnishings Standards shall provide the furniture designers and the architect and engineering team with guidance and tools that aid in the design of a cohesive standardized workplaces that conform to and meet the established standards implemented within all DCC occupied space.

▪ The goal of this standard is to provide a baseline of knowledge for all different types of design disciplines. It is incumbent on the furniture design team to ensure when implementing this standard that all DCC facilities adhere to applicable health, safety, and other requirements applicable to the jurisdiction in which they operate.

▪ DCC recognizes that all new and refurbished offices, due to site conditions, may require the

‘typical’ to be adapted to meet the required standards, and the project teams are encouraged to evaluate each project individually, based on the property and the project requirements as appropriate. Modi f icat ion or ‘best f i t ’ recommendations from the furniture design team will be taken under advisement by the DCC decision making authority: Capital Projects and

Facilities Management Division (CPFMD).

▪ All furniture must meet the sizes specified and these dimensions shall be considered the maximum allowed.

▪ For items which will may become outdated such as fabrics, finishes, and or information technology components, content will be marked with the last date of update. It is the furniture design teams’ responsibility to verify availability at the time of programming development.

▪ Project Design Requirements: ABAAS Compliance: The DC Courts require that all furniture and installations meet the requirements of the Architectural Barriers Act Accessibility Guidelines.

Furniture installed in all DCC occupied spaces shall comply with all clearances recommended under ABAAS. All furniture must meet the clearances shown for electrical placement. Any furniture solution provided that cannot meet this requirement will not be considered.

▪ Product Standards: The private offices and workstations are designed to a technical standard that is notionally based on MillerKnoll Reff and Dividends product lines. The technical requirements, dimensions, features, and specific finishes shown are to be considered the standard ‘basis of design’ for product performance and layout requirements for the typicals or items shown herein. Unless and item is noted otherwise, alternative products and applications may be considered as long as the proposed meets or exceeds the specification requirements stated in the ‘basis of design’ selection.

2 . D C C F U R N I T U R E S T A N D A R D S

A. Preferred Furniture Manufacturers

B. Furniture Finish Matrix

C. Office Technical Specifications

1. Chambers Suite – Associate Judge

2. Office Typical C

3. Office Typical D1

4. Office Typical D

5. Office Typical E

6. Office Finishes and Electrical Requirements

D. Workstation Technical Specifications

1. Workstation Typical F

2. Workstation Typical G

3. Workstation Typical H

4. Workstation Finishes and Electrical

Requirements

5. Workstation Electrical Wiring Diagram

Primary Furniture Manufacturers

Haworth Knoll (MillerKnoll)

Open Line Manufacturers

Arnold Contract Arconas

Byrne Electrical Claridge

Global Furniture Group Global Industrial

Humanscale KI

Kimball Krug

Mayline National

Peter Pepper Products Sit On It

Stiffel Lighting Trinity Seating

Vendors are responsible for verifying product and item codes, options, finishes, compatibility, quantities, and specifications prior to placing orders and for reverifying prior to installation.

A. PREFERRED FURNITURE MANUFACTURERS

MillerKnoll Haworth

Workstation/Office Storage Paint Folkstone Grey 114 Grout TR-0TG

Workstation/Office Paint Trim Folkstone Grey 114 Putty TR-0AA

Workstation/Office Veneer Trim Medium Walnut 512B Heritage Cherry VC-W30

Workstation Panel Fabric Growth Spurt, Quarry W6929 Striae Band C1-0AM

Workstations Laminate Brushed Grey 123 Platinum 0H-03P

Workstations Hardware Recessed Pull Linear Pull

Office Casegood Line Knoll Reff TBD

Office Casegood Veneer Medium Walnut 512B V1 Heritage Cherry VC-W30

Office Casegood Hardware Integral Pull Linear Pull

Office Casegood Tackboard Broadcloth II, Grey W16198 Striae Band C1-0AM

Storage Lock Cores & Keys Black / Ember Polished Chrome

Associate Judge Kimball Senator: Finish

Casegood Veneer Amber on Cherry

Casegood Storage Hardware Antique Brass

Magistrate Judge Knoll Reff: Finish

Casegood Veneer Medium Walnut 512B V1

Casegood Tackboard Fabric Broadcloth II, Grey W16198

Casegood Storage Hardware Routed Pull

Casegood Storage Lock Cores & Keys Black / Ember

B. FURNITURE FINISH MATRIX

O F F I C E a n d W O R K S T A T I O NS

C. Office Technical Specifications

1. Chambers Suite – Associate Judge

2. Office Typical C

3. Office Typical D1

4. Office Typical D

5. Office Typical E

6. Office Finishes and Electrical Requirements

POSITION/GRADE: ASSOCIATE JUDGE

MAXIMUM FURNITURE DIMENSIONS: DOES NOT APPLY

R ec y cl in g c an

M ag az in e ra ck

C h am b er O ff ic e

JA

A

R ecep tio n

C lerk

W o rk statio n s

CHAMBERS SUITE – ASSOCIATE JUDGE

Typical Requirements

• Veneer storage doors and drawers to have full-length integral pull without hardware and keyed alike

• (1) Desktop power module (P-DT) on Computer Desk

Details

1. (1) Sofa

2. (1) Lounge Chair

3. (2) End Table

4. (1) Coffee Table

5. (1) Table Lamp

6. (1) Coat Rack

7. (2) Guest Chair

8. (1) Computer Desk 36” w x 24” d

9. (2) 36”w x 14”d x 79”h open bookcase with 6 shelves

10. (1) Desk Lamp

11. (1) 72”w x 36”d Double Pedestal Desk

CHAMBERS SUITE – CHAMBER OFFICE

MAXIMUM FURNITURE DIMENSIONS: 14’ X 22’ (270 - 310 Sq Ft. +/- Office)

Trinity Davenport Lounge Chair C-LC1-ATrinity Davenport 3-Seat Sofa

C-LC2

Kimball Definitions End Table T-2418-W

Kimball Definitions Coffee Table T-4224-W

Stiffel Table Lamp L-102

Coat Rack

AC-TR

1 2

3 4

5 6

CHAMBERS SUITE – CHAMBER OFFICE

Trinity Conrad Guest Chair

C-SC4

Krug Millenium Computer Desk

CD-3624-W

Kimball Definitions Bookcase

BC-636-W

Stiffel Desk Lamp L-101

7 8

9 10

Kimball Senator Double Pedestal Desk

D-AJ

CHAMBERS SUITE – CHAMBER OFFICE

Requirements

• Metal filing to be keyed alike

• (1) Workstation Typical G

• (1) Workstation Typical H – Modified to attach to Typical G

• (1) Task Chair for each workstation

Details

1. (1) LF-530-S – 5-Drawler Lateral File with Overfile Storage

2. (4) LF-536-S – 5-Drawler Lateral File with Overfile Storage

3. (1) G-Typical Workstation

4. (1) H-Typical Workstation

POSITION/GRADE: (1) CLERICAL / 6-8 and (1) INTERN or CONTRACTOR MAXIMUM FURNITURE DIMENSIONS: (1) 7’6” X 6’ and (1) 6’ X 6’6”

CHAMBERS SUITE – CLERK WORKSTATIONS

Peter Pepper Recycle Center—1

RB-1

Global Lateral File with Add On

LF-530-S

LF-536-S

1 2

G -Typical Workstation

H -Typical Workstation Modified

POSITION/GRADE: (1) CLERICAL / 6-8 and (1) INTERN or CONTRACTOR MAXIMUM FURNITURE DIMENSIONS: (1) 8’ X 6’6” and (1) 6’ X 6’6”

CHAMBERS SUITE – CLERK WORKSTATIONS

Requirements

• (1) Workstation Typical JAA

• (1) Task Chair (S-TC1)

• (1) Desktop power module (P-DT)

Details

1. (2) Guest Chairs

2. (1) End Table with (1) Table Lamp

3. (1) Coat Rack

4. (1) Magazine Rack (not shown – placed on exterior of suite entry door)

NOTE: All finishes in the Workstation Typical JAA are veneer to include:

worksurfaces, storage fronts, and exterior panel skins/tiles.

POSITION/GRADE: JUDICIAL ADMINISTRATIVE ASSISTANT with RECEPTION SEATING MAXIMUM FURNITURE DIMENSIONS: 8’6”x 10’6” (105 Sq Ft. +/- Office)

CHAMBERS SUITE – JAA & RECEPTION

Peter Pepper Magazine Rack—2

MR-2-W

POSITION/GRADE: JUDICIAL ADMINISTRATIVE ASSISTANT with RECEPTION SEATING MAXIMUM FURNITURE DIMENSIONS: 8’6” x 10’6” (105 Sq Ft. +/- Office)

CHAMBERS SUITE – JAA & RECEPTION

Stiffel Table Lamp L-102

Table Lamp

Kimball Definitions End Table T-2418-W

Coat Rack

AC-TR

1 2

CHAMBERS SUITE – JAA & RECEPTION

Global Islands Guest Chair

C-SC1-JAA

POSITION/GRADE: JUDICIAL ADMINISTRATIVE ASSISTANT with RECEPTION SEATING MAXIMUM FURNITURE DIMENSIONS: 8’6” x 10’6” (105 Sq Ft. +/- Office)

Requirements

• Veneer storage doors and drawers to have full length integral pull and keyed alike

• (1) Undercabinet full-length slim LED task light with occupancy sensor

• (1) Undercabinet tackboard

• (1) Task Chair (C-TC1)

• (3) Guest Chairs (C-SC1-C)

• (1) Desktop power module (P-Desk)

Details

1. (1) 96”w x 36”d D-top with partial height veneer modesty panel

2. (1) 48”w x 24”d return with clamp mount power module

3. (1) 96”w x 24”d credenza with (2) 30”w lateral files

4. (1) 96”x overhead hutch with (1) LED task light and tackboard

5. (1) Mobile locking box/box/file veneer storage pedestal

POSITION/GRADE: DIVISION DIRECTOR / 15

MAXIMUM FURNITURE DIMENSIONS: 8’ X 9’ (180 Sq Ft. +/- Office)

OFFICE TYPICAL - C

POSITION/GRADE: DIVISION DIRECTOR / 15

POSITION/GRADE: DIVISION DIRECTOR / 15

Requirements

• Veneer storage doors and drawers to have full length integral pull and keyed alike

• (1) Undercabinet full-length slim LED task light with occupancy sensor

• (1) Undercabinet tackboard

• (1) Task Chair (C-TC1)

• (3) Guest Chairs (C-SC2-DE)

• (1) Desktop power module (P-Desk)

Details

1. (1) 72”w x 30”d D-top with partial height veneer modesty panel

2. (1) 48”w x 24”d return with clamp mount power module

3. (1) 96”w x 24”d credenza with (2) 30”w lateral files

4. (1) 96”w overhead hutch with (1) LED task light and tackboard

5. (1) Mobile locking box/box/file veneer pedestal

POSITION/GRADE: DEPUTY DIVISION DIRECTOR / 15

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (150 Sq Ft. +/- Office)

OFFICE TYPICAL – D1

POSITION/GRADE: DEPUTY DIVISION DIRECTOR / 15

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (150 Sq Ft. +/- Office)

OFFICE TYPICAL – D1

NOTE: DIMENSIONS SHOWN ARE MINIMUM FOR FURNITURE CONFIGURATION.

OFFICE SQUARE FOOTAGE IN HEADER IS BASED ON TITLE/GRADE.

POSITION/GRADE: DEPUTY DIVISION DIRECTOR / 15

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (150 Sq Ft. +/- Office)

OFFICE TYPICAL – D1

Requirements

• Veneer storage doors and drawers to have full length integral pull and keyed alike

• (1) Undercabinet full-length slim LED task light with occupancy sensor

• (1) Undercabinet tackboard

• (1) Task Chair (C-TC1)

• (3) Guest Chairs (C-SC2-DE)

• (1) Desktop power module (P-Desk)

Details

1. (1) 72”w x 30”d D-top with partial height veneer modesty panel

2. (1) 48”w x 24”d return with clamp mount power module

3. (1) 96”w x 24”d credenza with (2) 30”w lateral files

4. (1) 96”w overhead hutch with (1) LED task light and tackboard

5. (1) Mobile locking box/box/file veneer pedestal

POSITION/GRADE: BRANCH CHIEF, STAFF OFFICE DIRECTOR / 13-14

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (125 Sq Ft. +/- Office)

OFFICE TYPICAL - D

POSITION/GRADE: BRANCH CHIEF, STAFF OFFICE DIRECTOR / 13-14

POSITION/GRADE: BRANCH CHIEF, STAFF OFFICE DIRECTOR / 13-14

Requirements

• Veneer storage doors and drawers to have full length integral pull and keyed alike

• (1) Undercabinet full-length slim LED task light with occupancy sensor

• (1) Undercabinet tackboard

• (1) Task Chair (C-TC1)

• (3) Guest Chairs (C-SC2-DE)

• (1) Desktop power module (P-Desk)

Details

1. (1) 60”w x 30”d D-top with partial height veneer modesty panel

2. (1) 42”w x 24”d return

3. (1) 66”w x 24”d credenza with (1) box/box/file locking metal storage pedestal

4. (1) 66”w overhead hutch with LED task light and tackboard

5. (1) 36”w 5-drawer locking metal lateral file

OFFICE TYPICAL - E

POSITION/GRADE: SECTION CHIEF / 12-13

27272727

OFFICE TYPICAL - E

OFFICE TYPICAL - E

Freestanding Byrne power module with 1-duplex and 2-USB (USB-A + USB-C)

C o n s i s t e n t a c r o s s a l l o f f i c e s ( u n l e s s n o t e d )

Integral PullFlush Base Detail Undersurface Power Strip (as required)

Knoll Medium Walnut

512B V1

Knoll Broadcloth II Grey W1619-8

Black Knoll Folkstone Grey

Veneer Tackboard

Metal Column Grommets and Locks

Gloss Black

Grommet & Power Placement

OFFICE FINISHES and ELECTRICAL REQUIREMENTS

D. Workstation Technical Specifications

1. Workstation Typical F

2. Workstation Typical G

3. Workstation Typical H

4. Workstation Typical JAA

5. Workstation Finishes and Electrical

Requirements

6. Workstation Electrical Wiring Diagram

Requirements

• Painted metal locking storage doors and drawers to have full length integral pull and keyed alike

• (1) Task Chair (C-TC1)

• (1) Guest Chairs (C-SC1-F)

• (1) Desktop power module (P-Wkst)

Details

1. (1) 42”w x 24”d worksurface

2. (1) 90”w x 24”d worksurface with clamp mounted power module

3. (1) 48”w x 24”d worksurface with (1) 30”w 2-dr locking metal lateral file

4. (1) mobile box/box/file locking metal storage pedestal with handle

5. (1) 24”w x 24”d x 50”h locking metal storage tower with wardrobe and file/file drawer

6. (1) Adjustable LED task light with occupancy sensor (L-TL)

7. Workstation panels are 57”high tackable/acoustic fabric with veneer end and top trim

POSITION/GRADE: NON-SUPERVISORY / 9-11

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (60 Sq Ft. +/- Workstation)

WORKSTATION TYPICAL - F

POSITION/GRADE: NON-SUPERVISORY / 9-11

WORKSTATION TYPICAL - F

TYPCIAL CLUSTER LAYOUT

WORKSTATION TYPICAL - F

POSITION/GRADE: NON-SUPERVISORY / 9-11

Requirements

• Painted metal locking storage doors and drawers to have full length integral pull and keyed alike

• (1) Task Chair (C-TC1)

• (1) Desktop power module (P-Wkst)

Details

1. (1) 48”w x 24”d worksurface

2. (1) 66”w x 24”d worksurface with fixed locking metal Box/Box/File storage pedestal

3. (1) 24”w x 24”d x 50”h locking metal storage tower with wardrobe and

File/File drawer

4. (1) Adjustable LED task light with occupancy sensor (L-TL)

5. Workstation panels are 57”high tackable/acoustic fabric with veneer end and top trim

POSITION/GRADE: CLERICAL / 6-8

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (45 Sq Ft. +/- Workstation)

WORKSTATION TYPICAL - G

POSITION/GRADE: CLERICAL / 6-8

MAXIMUM FURNITURE DIMENSIONS: 8’ X 8’6” (45 Sq Ft. +/- Workstation)

WORKSTATION TYPICAL - G

Requirements

• Painted metal locking storage doors and drawers to have full length integral pull and keyed alike

• (1) Task Chair (C-TC1)

• (1) Desktop power module (P-Wkst)

Details

1. (1) 60”w x 24”d worksurface with locking Box/Box/File storage pedestal

2. (1) Adjustable LED task light with occupancy sensor (L-TL)

3. Workstation panels are 57”high tackable/acoustic fabric with veneer end and top trim

POSITION/GRADE: CONTRACTOR or INTERN MAXIMUM FURNITURE DIMENSIONS: 5’ X 5’6” (27.5 Sq Ft. +/- Workstation)

WORKSTATION TYPICAL - H

POSITION/GRADE: CONTRACTOR or INTERN MAXIMUM FURNITURE DIMENSIONS: 5’ X 5’6” (30 Sq Ft. +/- Workstation)

WORKSTATION TYPICAL - H

TYPCIAL CLUSTER LAYOUT

Requirements

• Veneer locking storage doors and drawers to have full length integral pull and keyed alike

• (1) Task Chair (C-TC1)

• (2) Guest Chairs (C-SC1-JAA)

• (1) Desktop power module (P-Wkst)

Details

1. (1) 72”w x 30”d veneer worksurface

2. (1) 42”w x 24”d veneer worksurface

3. (1) 120”w x 24”d veneer worksurface with (2) 36”w locking veneer front 2-drawer lateral files

4. (2) Panel-mount flip-up veneer front overheads: (1)36”w and (1) 48”w with

LED task lights underneath

5. (1) Veneer front locking Box/Box/File with recessed pull

6. Workstation panels are both worksurface height and 64”h with veneer exterior tiles and tackable/acoustic fabric interior with veneer end and top trim

POSITION/GRADE: JUDICIAL ADMINISTRATIVE ASSISTANT

WORKSTATION TYPICAL - JAA

POSITION/GRADE: JUDICIAL ADMINISTRATIVE ASSISTANT

WORKSTATION TYPICAL - JAA

Flush Base Detail

Knoll Growth Spurt Quarry

W692-9

Panel Fabric

Recessed Pull

Undersurface Power Strip (as required)

Knoll Medium Walnut

512B

Black Knoll Folkstone Grey

Veneer

Grommets and Locks

Knoll Brushed Grey 123

Surface Laminate Square Edge

Panel Trim Flat Veneer

Knoll Medium Walnut 112B

Surface Edge/Storage/ Legs/ Panel Base

(1) Desktop clamp-mounted power module with (3) power and (1) USB-A and (1) USB-C

Workstation Task Lamp Humanscale Element

WORKSTATION FINISHES and ELECTRICAL

REQUIREMENTS

C o n s i s t e n t a c r o s s a l l w o r k s t a t i o n s ( u n l e s s n o t e d )

WORKSTATION ELECTRICAL WIRING DIAGRAM

MillerKnoll: 8 -Wire 4-Circuit 2+2 K n o l l – 2 + 2 E l e c t r i c a l W i r i n g C o n f i g u r a t i o n

WORKSTATION ELECTRICAL WIRING DIAGRAM

HAWORTH: 8-Wire 4-Circuit 2+2 H a w o r t h – 2 + 2 E l e c t r i c a l W i r i n g C o n f i g u r a t i o n

3 . A P P E N D I X

A. Reference Furniture Photos

B. Document Version Log

Office EOffice D

APPENDIX

REFERENCE FURNITURE PHOTOS

P h o t o g r a p h s a r e f r o m D C C f a c i l i t i e s a n d m a y s h o w m o d i f i c a t i o n s f r o m s t a n d a r d t y p i c a l s , a l w a y s r e f e r t o O f f i c e a n d W o r k s t a t i o n T y p i c a l s h e r e i n a s w e l l a s t h e D C C F u r n i t u r e & F u r n i s h i n g s C a t a l o g .

Version Description of Update Executed By: Date

V.1 Initial Version C. Alexander 05/30/2025

APPENDIX

DOCUMENT VERSION LOG