Attachment_-_Drawings-Pictures.pdf
PDF 7 MB Posted
- Attached to
- Fan Coil Unit Replacement Federal contract opportunity
- Solicitation number
- 140P6425B0004
About this file
The document is a set of construction drawings for a Fan Coil Unit Replacement project at the First Ladies National Historic Site in Canton, Ohio. The comprehensive set includes mechanical plans for six floors (first through sixth), detailing the replacement of existing fan coil units with new units. Key specifications include:
The project involves removing existing fan coil units and installing new Trane fan coil units across all six floors of the building. The drawings provide detailed mechanical and electrical notes, including instructions for disconnecting and reconnecting electrical systems, handling existing equipment, and guidelines for installation. The fan coil unit schedule indicates multiple low vertical cabinet units with varying capacities, all from Trane, with wireless control thermostats. The contractor is required to photo-document existing conditions, carefully remove and dispose of old units, and install new units according to manufacturer recommendations and industry standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Site_Visit_Attendees_List_0001.pdf | ||
| Sol_140P6425B0004_Amd_0001.pdf | ||
| Questions_and_Answers_0001.pdf | ||
| Revised_Drawings_-_12_May_2025_0001.pdf | ||
| Sol_140P6425B0004.pdf | ||
| Bid_Schedule_-_Fan_Coil_Replace.pdf | ||
| Attachment_-_Construction_Contract_Admin.pdf | ||
| Attachment_-_Notice_to_Contractors.pdf | ||
| Wage_Determination_-_Stark_Co.pdf | ||
| Attachment_-_Limitations_on_Subcontracting_Report.xlsx | XLSX spreadsheet | |
| Attachment_-_Submittal_List.pdf | ||
| Bid_Schedule_-_Fan_Coil_Replace.xlsx | XLSX spreadsheet | |
| Specifications_-_Fan_Coil_Replace.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BUILDING LOCATION MAP
FAN COIL UNIT REPLACEMENT
RESEARCH CENTER
FIRST LADIES NATIONAL HISTORIC SITE
NOT TO SCALE
PROJECT REGION MAP
NOT TO SCALE
NORTH
NATIONAL
PARK
SERVICE
FAN COIL UNIT REPLACEMENT
RESEARCH CENTER
FIRST LADIES NATIONAL HISTORIC SITE
PROJECT LOCATION
205 MARKET
STREET SOUTH,
CANTON, OHIO
CONTRACTOR
STAGING AREA WITHIN
4 DEDICATED PARKING
STALLS BEHIND THE
IDA SAXTON MCKINLEY
HOUSE ARKANSAS
OKLAHOMA
MISSISSIPPILOUISANA
WEST VIRGINIA
PENNSYLVANIA
NEBRASKA
KANSAS
IOWA
MISSOURI
OHIO
MICHIGAN
WISCONSIN
MINNESOTA
INDIANA
NORTH DAKOTA
SOUTH DAKOTA
ILLINOIS
OKLAHOMA
TENNESEE
KENTUCKY
COLORADO
WYOMING
MONTANA
SASKATCHEWAN
MANITOBA
ONTARIO
ONTARIO
PROJECT LOCATION
CANTON, OHIO
REPRESENTATIONAL PHOTOGRAPHS:
THE FOLLOWING PHOTOGRAPHS ARE PROVIDED FOR THE CONVENIENCE OF THE CONTRACTOR ONLY AND DO NOT ALLEVIATE THE
CONTRACTOR'S RESPONSIBILITY TO FAMILIARIZE THEMSELVES WITH THE SITE PRIOR TO SUBMITTING THEIR BID. THESE PHOTOS DO NOT CAPTURE
THE TOTALITY OF THE PROJECT AREA; HOWEVER THEY PROVIDE A REPRESENTATIONAL EXAMPLE OF THE EXISTING FAN COIL UNITS TO BE
REPLACED AND THE EXISTING CONTEXT OF THE 6-STORY FACILITY.
TYPICAL LOW PROFILE FAN COIL UNIT TO BE REMOVED TYPICAL HIGH PROFILE FAN COIL UNIT TO BE REMOVED
EXISTING WATER PIPING BEING REPLACED WITH NEXUS COIL PACK CONNECTION UNDER SEPARATE
CONTRACT WHICH SHALL BE COMPLETE PRIOR TO INITIATION OF THE SCOPE OF WORK WITHIN THE
FACILITY UNDER THIS CONTRACT. SEE APPENDIX IN SPECIFICATIONS FOR RECEIVED PRODUCT
INFORMATION ON COIL PACKS BEING INSTALLED.
EXISTING WATER PIPING
CONNECTION BEING REMOVED
UNDER SEPARATE CONTRACT
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
AutoCAD SHX Text UNITED STATES DEPARTMENT OF THE INTERIOR NATIONAL PARK SERVICE MIDWEST REGIONAL OFFICE
AutoCAD SHX Text
QUALITY DESIGN CERTIFICATION
AutoCAD SHX Text Prepared in Accordance with Design Development (Title I) OR Drawing No. Drawing No. Variance from Design Development (Title I) Approved by Superintendent on OR Date Date Construction Drawing Not Preceded by Design Development (Title I)
AutoCAD SHX Text Project Manager
AutoCAD SHX Text Date
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA_FAN COIL REPLACE_COVER.dwg 2/6/2025 5:07 PM BY Bentley, Thomas Lee 2/6/2025 5:07 PM BY Bentley, Thomas Lee2/6/2025 5:07 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text
TITLE OF PROJECT
AutoCAD SHX Text
LOCATION WITHIN PARK
AutoCAD SHX Text
NAME OF PARK
AutoCAD SHX Text
WILLIAMS
AutoCAD SHX Text
COUNTY
AutoCAD SHX Text
MWRO 3,4,5
AutoCAD SHX Text
REGION
AutoCAD SHX Text
OHIO
AutoCAD SHX Text
STATE
AutoCAD SHX Text
CONSTRUCTION DRAWINGS
AutoCAD SHX Text
DRAWING SHEET INDEX
AutoCAD SHX Text SHEET SUB SHEET TITLE OF SHEET SUB SHEET TITLE OF SHEET TITLE OF SHEET GENERAL 1 0 COVER SHEET AND INDEX 0 COVER SHEET AND INDEX COVER SHEET AND INDEX MECHANICAL, ELECTRICAL, PLUMBING 2 M1.0 MECHANICAL AND GENERAL NOTES M1.0 MECHANICAL AND GENERAL NOTES MECHANICAL AND GENERAL NOTES 3 MEP1.1 FIRST FLOOR PLAN (REFERENCE ONLY) MEP1.1 FIRST FLOOR PLAN (REFERENCE ONLY) FIRST FLOOR PLAN (REFERENCE ONLY) 4 MEP1.2 SECOND FLOOR FAN COIL REPLACEMENT MEP1.2 SECOND FLOOR FAN COIL REPLACEMENT SECOND FLOOR FAN COIL REPLACEMENT 5 MEP1.3 THIRD FLOOR FLAN COIL REPLACEMENT MEP1.3 THIRD FLOOR FLAN COIL REPLACEMENT THIRD FLOOR FLAN COIL REPLACEMENT 6 MEP1.4 FOURTH FLOOR FAN COIL REPLACEMENT MEP1.4 FOURTH FLOOR FAN COIL REPLACEMENT FOURTH FLOOR FAN COIL REPLACEMENT 7 MEP1.5 FIFTH FLOOR FAN COIL REPLACEMENT (BID OPTION 1) MEP1.5 FIFTH FLOOR FAN COIL REPLACEMENT (BID OPTION 1) FIFTH FLOOR FAN COIL REPLACEMENT (BID OPTION 1) 8 MEP1.6 SIXTH FLOOR FAN COIL REPLACEMENT MEP1.6 SIXTH FLOOR FAN COIL REPLACEMENT SIXTH FLOOR FAN COIL REPLACEMENT 9 M2.1 FAN COIL UNIT SCHEDULEM2.1 FAN COIL UNIT SCHEDULEFAN COIL UNIT SCHEDULE
AutoCAD SHX Text
ROCK
AutoCAD SHX Text
LITTLE
AutoCAD SHX Text Agate Fossil Beds NM
AutoCAD SHX Text Apostle Islands NL
AutoCAD SHX Text Arkansas Post NMEN
AutoCAD SHX Text Badlands NP
AutoCAD SHX Text Brown v. Board of Education NHS
AutoCAD SHX Text Buffalo NR
AutoCAD SHX Text Cuyahoga Valley NRA
AutoCAD SHX Text Dayton Aviation Heritage NHP
AutoCAD SHX Text Effigy Mounds NM
AutoCAD SHX Text Fort Larned NHS
AutoCAD SHX Text Fort Scott NHS
AutoCAD SHX Text Fort Smith NHS
AutoCAD SHX Text Fort Union Nat. Trading Post NHS
AutoCAD SHX Text George Rogers Clark NHP
AutoCAD SHX Text George Washington Carver NM
AutoCAD SHX Text Grand Portage NM
AutoCAD SHX Text Harry S Truman NHS
AutoCAD SHX Text Herbert Hoover NHS
AutoCAD SHX Text Homestead NM of America
AutoCAD SHX Text Hopewell Culture NHP
AutoCAD SHX Text Hot Springs NP
AutoCAD SHX Text Indiana Dunes NL
AutoCAD SHX Text Isle Royale NP
AutoCAD SHX Text James A Garfield NHS
AutoCAD SHX Text Jefferson NEM
AutoCAD SHX Text Jewel Cave NM
AutoCAD SHX Text Keweenaw NHP
AutoCAD SHX Text Knife River Indian Villages NHS
AutoCAD SHX Text Lincoln Boyhood NMEM
AutoCAD SHX Text Mississippi NRRA
AutoCAD SHX Text Missouri NRR
AutoCAD SHX Text Mount Rushmore NMEM
AutoCAD SHX Text Niobrara NSR
AutoCAD SHX Text Ozark NSR
AutoCAD SHX Text Pea Ridge NMP
AutoCAD SHX Text Perry's Victory IPM
AutoCAD SHX Text Pictured Rocks NL
AutoCAD SHX Text Pipestone NM
AutoCAD SHX Text Saint Croix NSR
AutoCAD SHX Text Scotts Bluff NM
AutoCAD SHX Text Sleeping Bear Dunes NL
AutoCAD SHX Text Theodore Roosevelt NP
AutoCAD SHX Text Ulysses S Grant NHS
AutoCAD SHX Text Voyageurs NP
AutoCAD SHX Text William Howard Taft NHS
AutoCAD SHX Text Wilson's Creek NB
AutoCAD SHX Text Wind Cave NP
AutoCAD SHX Text
FORT SMITH
AutoCAD SHX Text
MEMPHIS
AutoCAD SHX Text
TOLEDO
AutoCAD SHX Text
ST. LOUIS
AutoCAD SHX Text
KANSAS CITY
AutoCAD SHX Text
DULUTH
AutoCAD SHX Text
CLEVELAND
AutoCAD SHX Text
CINCINNATI
AutoCAD SHX Text
MILWAUKEE
AutoCAD SHX Text
LINCOLN
AutoCAD SHX Text
TOPEKA
AutoCAD SHX Text
JEFFERSON CITY
AutoCAD SHX Text
INDIANAPOLIS
AutoCAD SHX Text
COLUMBUS
AutoCAD SHX Text
LANSING
AutoCAD SHX Text
MADISON
AutoCAD SHX Text
ST. PAUL
AutoCAD SHX Text
DES MOINES
AutoCAD SHX Text
BISMARCK
AutoCAD SHX Text
PIERRE
AutoCAD SHX Text
SPRINGFIELD
AutoCAD SHX Text
DAYTON
AutoCAD SHX Text
DETROIT
AutoCAD SHX Text
MINNEAPOLIS
AutoCAD SHX Text
CANTON
AutoCAD SHX Text
FORT WAYNE
AutoCAD SHX Text
CHICAGO
AutoCAD SHX Text
SIOUX FALLS
AutoCAD SHX Text
ROCHESTER
AutoCAD SHX Text
GREEN BAY
AutoCAD SHX Text
OKLAHOMA CITY
AutoCAD SHX Text
ST. LOUIS
AutoCAD SHX Text
OMAHA
AutoCAD SHX Text
CHEYENNE
AutoCAD SHX Text
SPRINGFIELD
AutoCAD SHX Text
PEORIA
AutoCAD SHX Text
DENVER
AutoCAD SHX Text First Ladies NHS
AutoCAD SHX Text
WILLIAMS COUNTY
AutoCAD SHX Text
OHIO
AutoCAD SHX Text BASE BID Base bid proposes removal of 45 fan coil units and replacement with 44 new fan coil units on floors 2, 3, 4, and 6. BID OPTION 1 Bid Option 1 proposes the removal and replacement of eleven (11) fan coil units on the fifth floor.
AutoCAD SHX Text
BASE BID AND BID OPTION SUMMARY
GENERAL NOTES:
1. ALL CONSTRUCTION SHALL BE IN CONFORMANCE WITH THESE PLANS, REFERENCED STANDARDS AND SPECIFICATIONS, AND GENERAL CONDITIONS IN THE CONTRACT.
2. THE CONTRACTOR SHALL BE RESPONSIBLE FOR DETERMINATION OF ALL FINAL QUANTITIES AND METHODS IN ORDER
TO CONDUCT THE WORK PRIOR TO SUBMITTING THEIR BID.
3. PROVIDE ALL SUBCONTRACTORS WITH ALL THE NECESSARY CONSTRUCTION DOCUMENT SHEETS AND INFORMATION APPLICABLE TO THEIR AREA OF WORK AS WELL AS WORK INFLUENCED BY OR INFLUENCES WORK BY OTHER TRADES.
4. ENSURE THAT ALL REQUIRED COORDINATION IS DONE BEFORE BEGINNING ANY CONSTRUCTION. IT IS THE CONTRACTOR'S RESPONSIBILITY TO OBTAIN ALL REQUIRED AUTHORIZATION FROM CONTRACTING OFFICER AND REPRESENTATIVE, PARK STAFF POINT OF CONTACT, AND FULLY ACKNOWLEDGE PRIOR TO COMMENCING WORK ON
SITE.
5. THE CONTRACTOR SHALL BE RESPONSIBLE FOR MEETING ALL INSPECTION CRITERIA AND SCHEDULES.
6. ALL PROPERTY DAMAGED BY CONSTRUCTION ACTIVITIES SHALL BE RESTORED TO A CONDITION EQUAL TO OR BETTER THAN EXISTING AT THE CONTRACTORS EXPENSE. THIS PERTAINS TO CONSTRUCTED ELEMENTS, AS OWNED BY NPS OR OTHER ENTITY. PHOTO DOCUMENT EXISTING CONDITIONS AND REVIEW WITH PARK CONTRACTING OFFICER REPRESENTATIVE (COR) TO AVOID MIS-IDENTIFICATION OF PRE-EXISTING DAMAGE AS CONSTRUCTION ACTIVITY
CAUSED.
7. ALL WORK AND ALL MATERIALS FURNISHED SHALL BE IN CONFORMITY WITH THE REQUIREMENTS IN THE CONTRACT
DOCUMENTS.
8. THE SPECIFICATIONS, NOTES AND PLANS CALL ATTENTION TO CERTAIN REQUIRED FEATURES OF THE CONSTRUCTION
BUT DO NOT IMPLY TO COVER ALL MEANS AND METHODS OF CONSTRUCTION.
9. ALL WORK SHALL BE ACCOMPLISHED TO THE HIGHEST QUALITY CRAFTSMANSHIP INDUSTRY STANDARDS FOR EACH
RESPECTIVE TRADE.
10. ALL WORK SHALL BE ACCOMPLISHED IN STRICT ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE, AND FEDERAL
CODES AND REGULATIONS.
11. APPARENT ERRORS, DISCREPANCIES OR OMISSIONS ON THE DRAWINGS SHALL BE BROUGHT TO THE CONTRACTING OFFICER'S ATTENTION AS SOON AS THE DISCREPANCY OR OMISSION IS FOUND. CONTRACTOR SHALL NOT PROCEED WITH WORK AT THE DISCREPANCY OR OMISSION PRIOR TO RECEIVING DIRECTION FROM THE COR.
12. ALL COMMUNICATION REQUESTING CLARIFICATION, DIRECTION AND OR REQUEST FOR INFORMATION (RFI) SHALL BE IN WRITTEN FORM. SUBMIT ALL COMMUNICATION REQUESTS TO COR AND ONLY WRITTEN RESPONSES FROM THE CO OR
COR WILL BE CONSIDERED APPROVED/AUTHORIZED.
13. THE GOVERNMENT WILL NOT BE RESPONSIBLE TO PAY FOR ANY UN-APPROVED MATERIALS NOR MATERIALS NOT
INCORPORATED INTO THE SCOPE OF THE PROJECT WORK.
14. AFTER COMPLETION OF CONSTRUCTION, PERFORM SITE CLEANUP OPERATION TO REMOVE ALL TRASH, DEBRIS, EXCESS MATERIALS AND EQUIPMENT FROM THE BUILDING AND GROUNDS. IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO SHOW THE PROJECT SITE CLEAN FOR FINAL ACCEPTANCE. ALL TRASH AND DEBRIS SHALL BE LAWFULLY DISPOSED OF.
15. CONTINUOUS ACCESS SHALL BE MAINTAINED FOR THE SURROUNDING AREAS DURING INSTALLATION OF THE NEW FAN COIL UNITS WITHIN THE BUILDING. NPS STAFF RESERVE THE RIGHT TO PROCEED WITH INDEPENDENT WORK ACTIVITY IN CLOSE PROXIMITY AT THE SAME TIME THE CONTRACTOR IS PERFORMING THE WORK OF THE CONTRACT; HOWEVER, CONFLICT WITH IMPEDING PROGRESS SHALL BE AVOIDED.
16. THE CONTRACTOR SHALL COORDINATE AND OBTAIN PERMISSION FROM THE CONTRACTING OFFICER REPRESENTATIVE (COR) ALL ALLOWABLE LOCATIONS AND DURATIONS OF TIME WHICH MATERIALS AND EQUIPMENT MAY BE STAGED WITHIN THE BUILDING AS WORK PROGRESSES. ANY DIRECTION FROM THE COR TO RELOCATE OR REMOVE MATERIAL DUE TO CONFLICT OR OTHER CONCERNING FACTORS SHALL BE ADHERED TO AND THE CONTRACTOR RELOCATE TO A
COR IDENTIFIED LOCATION.
MECHANICAL NOTES
1. ALL WORK SHALL BE IN ACCORDANCE WITH SMACNA STANDARDS AND SPECIFICATIONS, AND AUTHORITY HAVING
JURISDICTION.
2. THESE DRAWINGS ARE DIAGRAMMATIC IN NATURE AND NOT INTENDED TO SHOW ALL TRANSITIONS, OFFSETS, ETC.
CONTRACTOR SHALL FIELD VERIFY EXISTING CONDITIONS AND PROVIDE ALL NECESSARY FITTINGS TO COMPLETE THE INTENT OF THE DRAWINGS. ANY DISCREPANCIES BETWEEN DRAWINGS AND FIELD CONDITIONS SHALL BE REPORTED TO THE CONTRACTING OFFICER FOR RESOLUTION. CONTRACTOR MAY LOCATE MECHANICAL EQUIPMENT DIFFERENTLY THAN SHOWN ON DRAWINGS DUE TO CONFLICTS, PROVIDED FUNCTION AND/OR APPEARANCE ARE NOT AFFECTED AND
ALL MODIFICATIONS TO PLACEMENT HAS BEEN APPROVED BY THE COR IN WRITING.
3. COORDINATE SPACE REQUIREMENTS, SUPPORTS, AND INSTALLATION OF MECHANICAL WORK, WHICH ARE INDICATED DIAGRAMMATICALLY ON THE DRAWINGS. UTILIZE SPACES EFFICIENTLY TO MAXIMIZE ACCESSIBILITY FOR OTHER
INSTALLATIONS, FOR MAINTENANCE, AND FOR REPAIRS.
4. COMPLY WITH MANUFACTURER'S INSTRUCTIONS INCLUDING EACH STEP IN SEQUENCE. SHOULD MANUFACTURERS' INSTRUCTIONS CONFLICT WITH THE DRAWINGS, REQUEST CLARIFICATION FROM THE CONTRACTING OFFICER BEFORE
PROCEEDING.
5. CONTRACTOR SHALL REVIEW THESE DOCUMENTS CAREFULLY. CONTRACTOR SHALL CONTACT CONTRACTING OFFICER, FOR RESOLUTION OF ANY DISCREPANCIES, OMISSIONS, OR CLARIFICATIONS, BEFORE BID DATE.
6. PRODUCT DELIVERY, STORAGE, AND HANDLING: PROVIDE EQUIPMENT AND PERSONNEL TO HANDLE PRODUCTS BY METHODS TO PREVENT DAMAGE. PROMPTLY INSPECT SHIPMENTS TO ENSURE THAT PRODUCTS ARE UNDAMAGED.
STORE AND PROTECT PRODUCTS IN ACCORDANCE WITH MANUFACTURERS' INSTRUCTIONS.
7. ALL REMOVED EQUIPMENT AND MATERIALS SHALL BECOME PROPERTY OF THE CONTRACTOR TO DISPOSE OF LAWFULLY
OFF SITE.
8. NO CONSTRUCTION COST CHANGES IN THE CONTRACT SHALL BE ALLOWED UNLESS APPROVED BY THE CONTRACTING
OFFICER IN WRITING AND EXECUTED AS A MODIFICATION TO THE CONTRACT.
9. IN THE CASE OF A CONFLICT, UNLESS OTHERWISE NOTED, KEYNOTES ON MECHANICAL PLANS SHALL SUPERCEDE ANY
GENERAL NOTES ON THE PLANS.
10.EXISTING CHW & HW PUMPS ARE LOCATED IN BASEMENT BOILER ROOM.
11.BALANCING:
·1. CONTRACTOR TO PRE-BALANCE AND RECORD WATER FLOWS FOR RE-BALANCE AFTER COMPLETION.
·2. ADJUST WATER SYSTEMS, AFTER AIR BALANCING, TO PROVIDE DESIGN QUANTITIES.
·3. ADJUST SYSTEMS TO PROVIDE SPECIFIED PRESSURE DROPS AND FLOWS THROUGH HEAT TRANSFER ELEMENTS
PRIOR TO THERMAL TESTING. PERFORM BALANCING BY MEASUREMENT OF TEMPERATURE DIFFERENTIAL IN
CONJUNCTION WITH AIR BALANCING.
12.MECHANICAL CONTRACTOR TO CHECK OPERATION AND CONDITION OF ALL EXISTING MECHANICAL EQUIPMENT WITHIN THE CONFINES OF THIS SPACE AND PREPARE A WRITTEN LIST OF ANY DEFICIENCIES IN EQUIPMENT OPERATION OR
CONDITION TO THE CONTRACTING OFFICER
13.PROVIDE ADHESIVE, MULTICOLOR PIPE LABELS FOR ALL SYSTEMS. PROVIDE BETWEEN STACK AND NEWLY INSTALLED
NEXUS COIL PACKS.
BALANCING VALVE
MECHANICAL LEGEND
EXISTING ITEMS TO
CONNECTION TO EXISTING
BE DEMOLISHED
EXISTING ITEMS
NEW WORK
FLOW ARROW
THERMOMETER
PRESSURE GAUGE
DRAIN VALVE
UNION
PIPING SERVICES
PIPING SYSTEM COMPONENTS
TEE UP
TEE DOWN
CHWS
HWR
HWS
CHWR
ELBOW DOWN
ELBOW UP
DRAWING NOTATION
CHILLED WATER SUPPLY (CHWS)
HEATING WATER RETURN (HWR)
HEATING WATER SUPPLY (HWS)
CHILLER WATER RETURN (CHWR)
ISOLATION VALVE
VALVES
(N) NEW
(E) EXISTING
2-WAY CONTROL VALVE
ABBREVIATIONS
FCU FAN COIL UNIT
CUH CABINET UNIT HEATER
TYP. TYPICAL
DRAWING PLANS WITHIN THIS CONSTRUCTION DOCUMENT SET:
BACKGROUND FLOOR PLANS PROVIDED HEREIN ARE FROM THE ORIGINAL
INSTALLATION OF HVAC SYSTEM. AREAS OF SCOPE OF WORK AND KEYNOTES ARE
CLOUDED FOR REFERENCE. ALL OTHER NOTATIONS ARE NOT APPLICABLE.
AutoCAD SHX Text M 1.0
AutoCAD SHX Text
GENERAL AND MECHANICAL NOTES
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:47 PM BY Bentley, Thomas Lee 2/6/2025 4:47 PM BY Bentley, Thomas Lee2/6/2025 4:47 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
S
NOTES:
1.THIS SHEET IS PROVIDED FOR REFERENCE OF FIRST FLOOR WHERE CONTRACTOR SHALL
GAIN ENTRANCE TO THE FACILITY IN ACCESSING THE FLOORS ABOVE. NO WORK TO
MECHANICAL UNITS ON THIS FLOOR UNDER WORK OF THIS CONTRACT.
AutoCAD SHX Text
MEP 1.1
AutoCAD SHX Text
FIRST FLOOR PLAN (FOR REFERENCE ONLY)
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:47 PM BY Bentley, Thomas Lee 2/6/2025 4:47 PM BY Bentley, Thomas Lee2/6/2025 4:47 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
FIRST FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.1
1/4" = 1'-0"
KEY NOTES:
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
NOTES:
1.AREAS OF SCOPE OF WORK ARE CLOUDED FOR REFERENCE. ONLY KEYNOTES IDENTIFIED
IN KEYNOTE SECTION BELOW ARE INCLUDED IN THIS SCOPE OF WORK. ALL OTHER
NOTATIONS ARE FROM ORIGINAL BUILDING CONSTRUCTION DOCUMENTS USED AS
BACKGROUND FOR THIS SCOPE OF WORK AND ARE NOT APPLICABLE.
2. TERM "ISOLATION VALVE" SHALL MEAN NEXUS COIL PACK INSTALLED UNDER PREVIOUS
CONTRACT. UNLESS NOTED OTHERWISE.
3. FOR EACH EXISTING FAN COIL UNIT WHICH HAS A LABEL FOR NEWLY SCHEDULED FAN COIL UNIT (FCU X-X), CLEANLY DISCONNECT FROM ISOLATION VALVE, REMOVE FROM THE FACILITY, AND LAWFULLY DISPOSE OF.
4. UPON REMOVAL OF EACH RESPECTIVE UNIT, THE CONTRACTOR SHALL PHOTO DOCUMENT
AND IDENTIFY TO THE CONTRACTING OFFICER REPRESENTATIVE ANY EXISTING DAMAGE TO
WALLS, FLOORS, OR ANY OTHER SURFACES MARRED, SCRATCHED, OR WORN BY THE
EXISTING UNIT, AND NOT CAUSED BY CONTRACTOR'S METHODS OF REMOVAL, PRIOR TO
INSTALLATION OF NEW FAN COIL UNIT. AVOID MIS-INTERPRETING EXISTING DAMAGE OR
WEAR AS CREATED BY CONTRACTOR OPERATIONS.
5. PROVIDE AND INSTALL IN ACCORDANCE WITH THESE CONTRACT DOCUMENT
SPECIFICATIONS, MANUFACTURER RECOMMENDATIONS AND ASTM INDUSTRY STANDARDS
NEW FAN COIL UNITS. CONNECT AND TEST UNIT'S PROPER FUNCTION TO EXISTING ISOLATION
VALVES.
NEW THERMOSTAT TO BE LOCATED WHERE DIRECTED BY COR. LOCATIONS SHOW ARE
APPROXIMATION. SEE SPECIFICATIONS FOR THE WIRELESS CONTROL THERMOSTAT UNITS.
NO DIRECT WIRE TO FAN COIL UNITS AND GREATER DISTURBANCE THAN SINGLE MOUNTING
POINT SHALL BE ALLOWED UNLESS APPROVED BY THE CO IN WRITING.
FCU2-1
FCU2-1
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-2
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-3
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-4
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-5
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-6
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-7
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-8
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-9
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU2-10
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH VERTICAL RECESSED CABINET FCU SHEET M2-0FCU2-11
FCU2-11
ELECTRICAL NOTES:
1.NO CHANGES TO EXISTING ELECTRICAL GEAR OR CIRCUITS TO BE EXPECTED.
REPLACEMENT OF FAN COIL UNITS IS LIKE FOR LIKE IN PLACE. THERE ARE NO EXPECTED
CHANGES TO ELECTRICAL LOAD.
2. ELECTRICAL CONTRACTOR TO DISCONNECT EACH RESPECTIVE FAN COIL UNIT AND PULL
BACK CONDUCTORS /CONDUIT TO AN ACCESSIBLE LOCATION TO RE-CONNECT WHEN
PLACING NEW FAN COIL UNITS.
FCU2-2
FCU2-3
FCU2-5
FCU2-4
FCU2-6
FCU2-7
FCU2-8
FCU2-9
FCU2-10
AutoCAD SHX Text
MEP 1.2
AutoCAD SHX Text
SECOND FLOOR FAN COIL UNIT REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:48 PM BY Bentley, Thomas Lee 2/6/2025 4:48 PM BY Bentley, Thomas Lee2/6/2025 4:48 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
SECOND FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.2
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
%%UF2-1
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF2-2
AutoCAD SHX Text
%%UF2-3
AutoCAD SHX Text
%%UF2-4
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF2-5
AutoCAD SHX Text
%%UF2-7
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF2-6
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF2-8
AutoCAD SHX Text
%%UF2-9
AutoCAD SHX Text
%%UF2-10
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF2-11
T
NOTES:
FCU3-1
FCU3-1
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-2
NOT USEDFCU3-3
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-4
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-5
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-6
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH VERTICAL CABINET FCU SHEET M2-0FCU3-7
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-8
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-9
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU3-10
FCU3-11REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
FCU3-12REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
FCU3-2
FCU3-4
FCU3-5
FCU3-6
FCU3-7
FCU3-9
FCU3-8
FCU3-11
FCU3-12
FCU3-10
ELECTRICAL NOTES:
1.NO CHANGES TO EXISTING ELECTRICAL GEAR OR CIRCUITS TO BE EXPECTED.
REPLACEMENT OF FAN COIL UNITS IS LIKE FOR LIKE IN PLACE. THERE ARE NO EXPECTED
CHANGES TO ELECTRICAL LOAD.
2. ELECTRICAL CONTRACTOR TO DISCONNECT EACH RESPECTIVE FAN COIL UNIT AND PULL
BACK CONDUCTORS /CONDUIT TO AN ACCESSIBLE LOCATION TO RE-CONNECT WHEN
PLACING NEW FAN COIL UNITS.
1.AREAS OF SCOPE OF WORK ARE CLOUDED FOR REFERENCE. ONLY KEYNOTES IDENTIFIED
IN KEYNOTE SECTION BELOW ARE INCLUDED IN THIS SCOPE OF WORK. ALL OTHER
NOTATIONS ARE FROM ORIGINAL BUILDING CONSTRUCTION DOCUMENTS USED AS
BACKGROUND FOR THIS SCOPE OF WORK AND ARE NOT APPLICABLE.
2. TERM "ISOLATION VALVE" SHALL MEAN NEXUS COIL PACK INSTALLED UNDER PREVIOUS
CONTRACT. UNLESS NOTED OTHERWISE.
3. FOR EACH EXISTING FAN COIL UNIT WHICH HAS A LABEL FOR NEWLY SCHEDULED FAN COIL UNIT (FCU X-X), CLEANLY DISCONNECT FROM ISOLATION VALVE, REMOVE FROM THE FACILITY, AND LAWFULLY DISPOSE OF.
4. UPON REMOVAL OF EACH RESPECTIVE UNIT, THE CONTRACTOR SHALL PHOTO DOCUMENT
AND IDENTIFY TO THE CONTRACTING OFFICER REPRESENTATIVE ANY EXISTING DAMAGE TO
WALLS, FLOORS, OR ANY OTHER SURFACES MARRED, SCRATCHED, OR WORN BY THE
EXISTING UNIT, AND NOT CAUSED BY CONTRACTOR'S METHODS OF REMOVAL, PRIOR TO
INSTALLATION OF NEW FAN COIL UNIT. AVOID MIS-INTERPRETING EXISTING DAMAGE OR
WEAR AS CREATED BY CONTRACTOR OPERATIONS.
5. PROVIDE AND INSTALL IN ACCORDANCE WITH THESE CONTRACT DOCUMENT
SPECIFICATIONS, MANUFACTURER RECOMMENDATIONS AND ASTM INDUSTRY STANDARDS
NEW FAN COIL UNITS. CONNECT AND TEST UNIT'S PROPER FUNCTION TO EXISTING ISOLATION
VALVES.
NEW THERMOSTAT TO BE LOCATED WHERE DIRECTED BY COR. LOCATIONS SHOW ARE
APPROXIMATION. SEE SPECIFICATIONS FOR THE WIRELESS CONTROL THERMOSTAT UNITS.
NO DIRECT WIRE TO FAN COIL UNITS AND GREATER DISTURBANCE THAN SINGLE MOUNTING
POINT SHALL BE ALLOWED UNLESS APPROVED BY THE CO IN WRITING.
AutoCAD SHX Text
THIRD FLOOR FAN COIL UNIT REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:48 PM BY Bentley, Thomas Lee 2/6/2025 4:48 PM BY Bentley, Thomas Lee2/6/2025 4:48 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
THIRD FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.3
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
MEP 1.3
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
%%UF3-2
AutoCAD SHX Text
%%UF3-4
AutoCAD SHX Text F3-1 F3-2 F3-4
AutoCAD SHX Text T
AutoCAD SHX Text F3-6
AutoCAD SHX Text T
AutoCAD SHX Text F3-5
AutoCAD SHX Text T
AutoCAD SHX Text F3-7
AutoCAD SHX Text T
AutoCAD SHX Text F3-8
AutoCAD SHX Text T
AutoCAD SHX Text F3-9
AutoCAD SHX Text T
F3-10 F3-11 F3-12
NOTES:
FCU4-1
FCU4-1
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-2
FCU4-3
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-4
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-5
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH VERTICAL CABINET FCU SHEET M2-0FCU4-6
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-7
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-8
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-9
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU4-10
FCU4-11REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
FCU4-2
FCU4-3
FCU4-4
FCU4-5
FCU4-6
FCU4-8
FCU4-7
FCU4-9
FCU4-10
FCU4-11
ELECTRICAL NOTES:
1.NO CHANGES TO EXISTING ELECTRICAL GEAR OR CIRCUITS TO BE EXPECTED.
REPLACEMENT OF FAN COIL UNITS IS LIKE FOR LIKE IN PLACE. THERE ARE NO EXPECTED
CHANGES TO ELECTRICAL LOAD.
2. ELECTRICAL CONTRACTOR TO DISCONNECT EACH RESPECTIVE FAN COIL UNIT AND PULL
BACK CONDUCTORS /CONDUIT TO AN ACCESSIBLE LOCATION TO RE-CONNECT WHEN
PLACING NEW FAN COIL UNITS.
1.AREAS OF SCOPE OF WORK ARE CLOUDED FOR REFERENCE. ONLY KEYNOTES IDENTIFIED
IN KEYNOTE SECTION BELOW ARE INCLUDED IN THIS SCOPE OF WORK. ALL OTHER
NOTATIONS ARE FROM ORIGINAL BUILDING CONSTRUCTION DOCUMENTS USED AS
BACKGROUND FOR THIS SCOPE OF WORK AND ARE NOT APPLICABLE.
2. TERM "ISOLATION VALVE" SHALL MEAN NEXUS COIL PACK INSTALLED UNDER PREVIOUS
CONTRACT. UNLESS NOTED OTHERWISE.
3. FOR EACH EXISTING FAN COIL UNIT WHICH HAS A LABEL FOR NEWLY SCHEDULED FAN COIL UNIT (FCU X-X), CLEANLY DISCONNECT FROM ISOLATION VALVE, REMOVE FROM THE FACILITY, AND LAWFULLY DISPOSE OF.
4. UPON REMOVAL OF EACH RESPECTIVE UNIT, THE CONTRACTOR SHALL PHOTO DOCUMENT
AND IDENTIFY TO THE CONTRACTING OFFICER REPRESENTATIVE ANY EXISTING DAMAGE TO
WALLS, FLOORS, OR ANY OTHER SURFACES MARRED, SCRATCHED, OR WORN BY THE
EXISTING UNIT, AND NOT CAUSED BY CONTRACTOR'S METHODS OF REMOVAL, PRIOR TO
INSTALLATION OF NEW FAN COIL UNIT. AVOID MIS-INTERPRETING EXISTING DAMAGE OR
WEAR AS CREATED BY CONTRACTOR OPERATIONS.
5. PROVIDE AND INSTALL IN ACCORDANCE WITH THESE CONTRACT DOCUMENT
SPECIFICATIONS, MANUFACTURER RECOMMENDATIONS AND ASTM INDUSTRY STANDARDS
NEW FAN COIL UNITS. CONNECT AND TEST UNIT'S PROPER FUNCTION TO EXISTING ISOLATION
VALVES.
NEW THERMOSTAT TO BE LOCATED WHERE DIRECTED BY COR. LOCATIONS SHOW ARE
APPROXIMATION. SEE SPECIFICATIONS FOR THE WIRELESS CONTROL THERMOSTAT UNITS.
NO DIRECT WIRE TO FAN COIL UNITS AND GREATER DISTURBANCE THAN SINGLE MOUNTING
POINT SHALL BE ALLOWED UNLESS APPROVED BY THE CO IN WRITING.
AutoCAD SHX Text
FORTH FLOOR FAN COIL UNIT REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:48 PM BY Bentley, Thomas Lee 2/6/2025 4:48 PM BY Bentley, Thomas Lee2/6/2025 4:48 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
FORTH FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.4
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
MEP 1.4
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text F4-1
AutoCAD SHX Text T
AutoCAD SHX Text F4-5
AutoCAD SHX Text T
AutoCAD SHX Text F4-4
AutoCAD SHX Text T
AutoCAD SHX Text F4-6
AutoCAD SHX Text T
AutoCAD SHX Text F4-2
AutoCAD SHX Text T
AutoCAD SHX Text F4-3
AutoCAD SHX Text T
AutoCAD SHX Text F4-7 F4-8
AutoCAD SHX Text T
F4-9 F-10 F-11
NOTES:
FCU5-1
FCU5-1
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-2
FCU5-3
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-4
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-5
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH VERTICAL CABINET FCU SHEET M2-0FCU5-6
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-7
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-8
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-9
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU5-10
FCU5-11REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
FCU5-2
FCU5-3
FCU5-4
FCU5-5
FCU5-6
FCU5-7
FCU5-8
FCU5-9
FCU5-10
FCU5-11
ELECTRICAL NOTES:
1.NO CHANGES TO EXISTING ELECTRICAL GEAR OR CIRCUITS TO BE EXPECTED.
REPLACEMENT OF FAN COIL UNITS IS LIKE FOR LIKE IN PLACE. THERE ARE NO EXPECTED
CHANGES TO ELECTRICAL LOAD.
2. ELECTRICAL CONTRACTOR TO DISCONNECT EACH RESPECTIVE FAN COIL UNIT AND PULL
BACK CONDUCTORS /CONDUIT TO AN ACCESSIBLE LOCATION TO RE-CONNECT WHEN
PLACING NEW FAN COIL UNITS.
1.AREAS OF SCOPE OF WORK ARE CLOUDED FOR REFERENCE. ONLY KEYNOTES IDENTIFIED
IN KEYNOTE SECTION BELOW ARE INCLUDED IN THIS SCOPE OF WORK. ALL OTHER
NOTATIONS ARE FROM ORIGINAL BUILDING CONSTRUCTION DOCUMENTS USED AS
BACKGROUND FOR THIS SCOPE OF WORK AND ARE NOT APPLICABLE.
2. TERM "ISOLATION VALVE" SHALL MEAN NEXUS COIL PACK INSTALLED UNDER PREVIOUS
CONTRACT. UNLESS NOTED OTHERWISE.
3. FOR EACH EXISTING FAN COIL UNIT WHICH HAS A LABEL FOR NEWLY SCHEDULED FAN COIL UNIT (FCU X-X), CLEANLY DISCONNECT FROM ISOLATION VALVE, REMOVE FROM THE FACILITY, AND LAWFULLY DISPOSE OF.
4. UPON REMOVAL OF EACH RESPECTIVE UNIT, THE CONTRACTOR SHALL PHOTO DOCUMENT
AND IDENTIFY TO THE CONTRACTING OFFICER REPRESENTATIVE ANY EXISTING DAMAGE TO
WALLS, FLOORS, OR ANY OTHER SURFACES MARRED, SCRATCHED, OR WORN BY THE
EXISTING UNIT, AND NOT CAUSED BY CONTRACTOR'S METHODS OF REMOVAL, PRIOR TO
INSTALLATION OF NEW FAN COIL UNIT. AVOID MIS-INTERPRETING EXISTING DAMAGE OR
WEAR AS CREATED BY CONTRACTOR OPERATIONS.
5. PROVIDE AND INSTALL IN ACCORDANCE WITH THESE CONTRACT DOCUMENT
SPECIFICATIONS, MANUFACTURER RECOMMENDATIONS AND ASTM INDUSTRY STANDARDS
NEW FAN COIL UNITS. CONNECT AND TEST UNIT'S PROPER FUNCTION TO EXISTING ISOLATION
VALVES.
NEW THERMOSTAT TO BE LOCATED WHERE DIRECTED BY COR. LOCATIONS SHOW ARE
APPROXIMATION. SEE SPECIFICATIONS FOR THE WIRELESS CONTROL THERMOSTAT UNITS.
NO DIRECT WIRE TO FAN COIL UNITS AND GREATER DISTURBANCE THAN SINGLE MOUNTING
POINT SHALL BE ALLOWED UNLESS APPROVED BY THE CO IN WRITING.
AutoCAD SHX Text
FIFTH FLOOR FAN COIL UNIT REPLACEMENT BID OPTION 1
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 5:05 PM BY Bentley, Thomas Lee 2/6/2025 5:05 PM BY Bentley, Thomas Lee2/6/2025 5:05 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
FIFTH FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
MEP 1.5
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text F5-1
AutoCAD SHX Text T
AutoCAD SHX Text F5-2
AutoCAD SHX Text T
AutoCAD SHX Text F5-3
AutoCAD SHX Text T
AutoCAD SHX Text F5-6
AutoCAD SHX Text T
AutoCAD SHX Text F5-5
AutoCAD SHX Text T
AutoCAD SHX Text F5-4
AutoCAD SHX Text T
AutoCAD SHX Text F5-7 F5-8
AutoCAD SHX Text T
AutoCAD SHX Text F5-11
AutoCAD SHX Text T
F5-9 F5-10
NOTES:
FCU6-1
FCU6-1
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-2
FCU6-3
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-4
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-5
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH VERTICAL CABINET FCU SHEET M2-0FCU6-6
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-7
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-8
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-9
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0FCU6-10
FCU6-11REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
REMOVE EXISTING FAN COIL UNIT AND REPLACE WITH LOW VERTICAL CABINET FCU SHEET M2-0
FCU6-2
FCU6-3
FCU6-4
FCU6-5
FCU6-6
FCU6-7
FCU6-8
FCU6-9
FCU6-10
FCU6-11
ELECTRICAL NOTES:
1.NO CHANGES TO EXISTING ELECTRICAL GEAR OR CIRCUITS TO BE EXPECTED.
REPLACEMENT OF FAN COIL UNITS IS LIKE FOR LIKE IN PLACE. THERE ARE NO EXPECTED
CHANGES TO ELECTRICAL LOAD.
2. ELECTRICAL CONTRACTOR TO DISCONNECT EACH RESPECTIVE FAN COIL UNIT AND PULL
BACK CONDUCTORS /CONDUIT TO AN ACCESSIBLE LOCATION TO RE-CONNECT WHEN
PLACING NEW FAN COIL UNITS.
1.AREAS OF SCOPE OF WORK ARE CLOUDED FOR REFERENCE. ONLY KEYNOTES IDENTIFIED
IN KEYNOTE SECTION BELOW ARE INCLUDED IN THIS SCOPE OF WORK. ALL OTHER
NOTATIONS ARE FROM ORIGINAL BUILDING CONSTRUCTION DOCUMENTS USED AS
BACKGROUND FOR THIS SCOPE OF WORK AND ARE NOT APPLICABLE.
2. TERM "ISOLATION VALVE" SHALL MEAN NEXUS COIL PACK INSTALLED UNDER PREVIOUS
CONTRACT. UNLESS NOTED OTHERWISE.
3. FOR EACH EXISTING FAN COIL UNIT WHICH HAS A LABEL FOR NEWLY SCHEDULED FAN COIL UNIT (FCU X-X), CLEANLY DISCONNECT FROM ISOLATION VALVE, REMOVE FROM THE FACILITY, AND LAWFULLY DISPOSE OF.
4. UPON REMOVAL OF EACH RESPECTIVE UNIT, THE CONTRACTOR SHALL PHOTO DOCUMENT
AND IDENTIFY TO THE CONTRACTING OFFICER REPRESENTATIVE ANY EXISTING DAMAGE TO
WALLS, FLOORS, OR ANY OTHER SURFACES MARRED, SCRATCHED, OR WORN BY THE
EXISTING UNIT, AND NOT CAUSED BY CONTRACTOR'S METHODS OF REMOVAL, PRIOR TO
INSTALLATION OF NEW FAN COIL UNIT. AVOID MIS-INTERPRETING EXISTING DAMAGE OR
WEAR AS CREATED BY CONTRACTOR OPERATIONS.
5. PROVIDE AND INSTALL IN ACCORDANCE WITH THESE CONTRACT DOCUMENT
SPECIFICATIONS, MANUFACTURER RECOMMENDATIONS AND ASTM INDUSTRY STANDARDS
NEW FAN COIL UNITS. CONNECT AND TEST UNIT'S PROPER FUNCTION TO EXISTING ISOLATION
VALVES.
NEW THERMOSTAT TO BE LOCATED WHERE DIRECTED BY COR. LOCATIONS SHOW ARE
APPROXIMATION. SEE SPECIFICATIONS FOR THE WIRELESS CONTROL THERMOSTAT UNITS.
NO DIRECT WIRE TO FAN COIL UNITS AND GREATER DISTURBANCE THAN SINGLE MOUNTING
POINT SHALL BE ALLOWED UNLESS APPROVED BY THE CO IN WRITING.
AutoCAD SHX Text
SIXTH FLOOR FAN COIL UNIT REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:49 PM BY Bentley, Thomas Lee 2/6/2025 4:49 PM BY Bentley, Thomas Lee2/6/2025 4:49 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
AutoCAD SHX Text 258437C
AutoCAD SHX Text
SIXTH FLOOR MECHANICAL PLAN
AutoCAD SHX Text
AutoCAD SHX Text 1.6
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
MEP 1.6
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text F6-1
AutoCAD SHX Text T
AutoCAD SHX Text F6-2
AutoCAD SHX Text T
AutoCAD SHX Text F6-3
AutoCAD SHX Text T
AutoCAD SHX Text F6-6
AutoCAD SHX Text T
AutoCAD SHX Text F6-5
AutoCAD SHX Text T
AutoCAD SHX Text F6-4
AutoCAD SHX Text T
AutoCAD SHX Text F6-7 F6-8
AutoCAD SHX Text T
AutoCAD SHX Text F6-11
AutoCAD SHX Text T
F6-9 F6-10
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
BID OPTION 1
AutoCAD SHX Text M2.0
AutoCAD SHX Text
FAN COIL UNIT SCHEDULE
AutoCAD SHX Text
AutoCAD SHX Text
TITLE OF SHEET
AutoCAD SHX Text
DESIGNED:
AutoCAD SHX Text
TECH. REVIEW:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SUB SHEET NO.
AutoCAD SHX Text 01/31/25
AutoCAD SHX Text
ZR
AutoCAD SHX Text
ZR
AutoCAD SHX Text
TB
AutoCAD SHX Text
FIRST LADIES NATIONAL HISTORIC SITE
AutoCAD SHX Text M:\Groups\Maint\Archives\FILA\80024-FILA-Research Center Fan Coil Units\258437C Fan Coil Unit Replacement_FPI\FILA 258437C_CD SHEET SET.dwg 2/6/2025 4:49 PM BY Bentley, Thomas Lee 2/6/2025 4:49 PM BY Bentley, Thomas Lee2/6/2025 4:49 PM BY Bentley, Thomas Lee BY Bentley, Thomas LeeBentley, Thomas Lee
AutoCAD SHX Text Date
AutoCAD SHX Text Mark
AutoCAD SHX Text Sheet
AutoCAD SHX Text
REVISION
AutoCAD SHX Text Initial
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
PMIS/PKG NO.
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text 495 80026
AutoCAD SHX Text
258437C
| Sheets and Views |
| COVER |
| FILA 258437C_CD SHEET SET-M1-0.pdf |
| Sheets and Views |
| M1-0 |
| FILA 258437C_CD SHEET SET-M1-1.pdf |
| Sheets and Views |
| M1-1 |
| FILA 258437C_CD SHEET SET-M2-0.pdf |
| Sheets and Views |
| M2-0 |
| FILA 258437C_CD SHEET SET-MEP-2.pdf |
| Sheets and Views |
| MEP-2 |
| FILA 258437C_CD SHEET SET-MEP-3.pdf |
| Sheets and Views |
| MEP-3 |
| FILA 258437C_CD SHEET SET-MEP-4.pdf |
| Sheets and Views |
| MEP-4 |
| FILA 258437C_CD SHEET SET-MEP-5.pdf |
| Sheets and Views |
| MEP-5 |
| FILA 258437C_CD SHEET SET-MEP-6.pdf |
| Sheets and Views |
| MEP-6 |
| FILA 258437C_CD SHEET SET-M2-0.pdf |
| Sheets and Views |
| M2-0 |
File details come from the government source that posted it. Updated .