Attachment 5-Updated Dorm Duct Drawings.pdf
PDF 6 MB Posted
- Solicitation number
- FA330026P0088
About this file
This file contains architectural and mechanical engineering drawings for HVAC and electrical repairs at Building 1485 (OTS Dining Facility) located at Maxwell Air Force Base, Alabama.
The project, identified as Maxwell Project #PNQS 16-7854, involves comprehensive HVAC system design and installation across multiple floors of a multi-story dormitory and dining facility building. The drawings include detailed floor plans for mechanical systems, ductwork layouts, piping connections, and component specifications for the first floor, second floor, third floor, and attic spaces. Key systems depicted include air-cooled chiller piping connections, VAV (variable air volume) boxes with control mechanisms, exhaust risers, supply and return ductwork, heating coils, and HVAC equipment placement in mechanical rooms. The specifications reference duct sizes, materials (aluminum and fiberglass), insulation requirements, and installation standards. Sections detail 1st floor and 2nd floor mechanical rooms, laundry room configurations, and attic mechanical spaces. The drawings also include typical module HVAC plans, horizontal fan coil unit details, and bathroom exhaust riser configurations. Large-scale mechanical plans for individual rooms (such as Rooms 205 and 305) provide detailed layouts of distribution systems, control valves, and ductwork connections. General notes throughout the drawings specify installation procedures, material requirements, seal classifications, and coordination requirements between mechanical systems and building infrastructure. The contract number referenced is W91278-14-D-0039, with the project submitted by HHB Engineers, P.C. in Prattville, Alabama.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 6-QNA_Dorm Duct Cleaning.docx | DOCX document | |
| Attachment 6-QNA_Dorm Duct Cleaning.docx | DOCX document | |
| Attachment 2-Dorm Ducts Provision-Clauses.pdf | ||
| Clean and Sanitize Dorm Combo-Amendment 0005.docx | DOCX document | |
| Attachment 3-Wage Determination-May 2026.pdf | ||
| Attachment 6-QNA_Dorm Duct Cleaning.docx | DOCX document | |
| Clean and Sanitize Dorm Combo-Amendment 0004.docx | DOCX document | |
| Clean and Sanitize Dorm Combo-Amendment 0003.docx | DOCX document | |
| Clean and Sanitize Dorm Combo-Amendment 0002.docx | DOCX document | |
| Attachment 6-Provisions And Clauses-Clean And Sanitize Dorm Ducts v2.docx | DOCX document | |
| Clean and Sanitize Dorm Combo-Amendment 0001.docx | DOCX document | |
| Attachment 1-SOW_AirDuctCleaning-Sanitize.docx | DOCX document | |
| Attachment 3-Wage Determination-June 2026.pdf | ||
| Clean and Sanitize Dorm Combo.docx | DOCX document | |
| Attachment 2-Provisions And Clauses-Clean And Sanitize Dorm Ducts.pdf | ||
| Attachment 4-Site Visit Sign-Dorm HVAC Ducts.docx | DOCX document |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D E
S C
R I P
T I O
N M
A R
K D
A T
E
US Army Corps of Engineers
SHEET ID
S O
L I C
I T
A T
I O
N
N
O
D E
S I G
N E
D
B
Y
S I Z
E
S U
B M
I T
T E
D
B
Y
C O
N T
R A
C T
N
O
U S
A
R M
Y
C
O R
P S
F
E
N G
I N
E E
R S
M O
B I L
E
D
I S
T R
I C
T
M O
B I L
E
A
L A
B A
M A
C H
E C
K E
D
B
Y
D R
A W
N
B
Y
I S
S U
E
D
A T
E
A
B
C
D
E
F
G
2 3 4 5 6 7 8 9
P R
O J E
U M
B E
R
F I L
E
N
A M
E
S
A I N
T
J O
S E
H
R
E E
T
HHB Engineers, P.C.
A N
S I
D
M A
X W
E L
L
A
I R
R
B
A S
E
A
L
O T
S
D
I N
I N
G
F
A C
I L
I T
Y
B
U I L
D I N
G
H V
L E
C T
R I C
P
A I R
S
M A
X W
E L
L
P
R O
J E
Q
S
S E
P T
- W
D
M E
F
J K
N
T L
H
T L
H
T L
H
M E
F
M d w g
M-105
F L O
A
N
M
E C
H A
N I C
A L
K
I T
C H
E
A
AutoCAD SHX Text N
AutoCAD SHX Text M-105
AutoCAD SHX Text
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
%%UFLOOR PLAN - MECHANICAL - KITCHEN AREA
AutoCAD SHX Text
AutoCAD SHX Text M-402
AutoCAD SHX Text
AutoCAD SHX Text M-402
AutoCAD SHX Text E20
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ACI
AutoCAD SHX Text
AutoCAD SHX Text
ACO
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
VAV-2
AutoCAD SHX Text
AutoCAD SHX Text
VAV-1
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
VAV-4
AutoCAD SHX Text
AutoCAD SHX Text
VAV-3
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
VAV-7
AutoCAD SHX Text
VAV-9
AutoCAD SHX Text
VAV-8
AutoCAD SHX Text E12
AutoCAD SHX Text
AutoCAD SHX Text 10/10 S.S.
AutoCAD SHX Text 12/14 S.S.
AutoCAD SHX Text
EX. HOOD CONNECTION
AutoCAD SHX Text
EF
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 12/14 S.S.
AutoCAD SHX Text
EX. 24/12 LOUVER
AutoCAD SHX Text
AutoCAD SHX Text
VAV-11
AutoCAD SHX Text
AutoCAD SHX Text
VAV-10
AutoCAD SHX Text
AutoCAD SHX Text
VAV-6
AutoCAD SHX Text
AutoCAD SHX Text
VAV-5
AutoCAD SHX Text 24/16 S.S.
AutoCAD SHX Text
NEW 24/24 LOUVER
AutoCAD SHX Text
EF
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
RAF
AutoCAD SHX Text
AutoCAD SHX Text
SEE SHEET M3.2
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text M3.2
AutoCAD SHX Text
MEZZANINE PLAN
AutoCAD SHX Text
BOLLARDS, 2 PLACES
AutoCAD SHX Text
SET UNIT APPROX. 2 FEET WEST OF TRENCH DRAIN
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text
AutoCAD SHX Text 2-
AutoCAD SHX Text R20
AutoCAD SHX Text
AutoCAD SHX Text C10
AutoCAD SHX Text
AutoCAD SHX Text 4-
AutoCAD SHX Text R16
AutoCAD SHX Text
AutoCAD SHX Text R20
AutoCAD SHX Text
AutoCAD SHX Text C10
AutoCAD SHX Text
AutoCAD SHX Text 4-
AutoCAD SHX Text C10
AutoCAD SHX Text
AutoCAD SHX Text C12
AutoCAD SHX Text
AutoCAD SHX Text C10
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text E8
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text
AutoCAD SHX Text 6-
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text E8
AutoCAD SHX Text
AutoCAD SHX Text 2-
AutoCAD SHX Text C8
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text
AutoCAD SHX Text
PRATTVILLE, AL 334/358-2707
AutoCAD SHX Text
CONSULTING ENGINEERS
AutoCAD SHX Text
ENGINEERS/CONTRACTORS, INC.
AutoCAD SHX Text
100% FINAL READY FOR CONSTRUCTION
AutoCAD SHX Text
AutoCAD SHX Text 9/11/18
AutoCAD SHX Text
100% DESIGN SUBMITTAL
AutoCAD SHX Text A
AutoCAD SHX Text 8/13/18
AutoCAD SHX Text N:\2018jobs\218026\Drawings\MECH\B1484 KITCHEN UPGRADE\Sheets\MEF19006-M-105.dwg
AutoCAD SHX Text LaTarus Humphries
AutoCAD SHX Text
9/11/2018 9:08 AM
AutoCAD SHX Text
SCALE: 1/8" = 1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text 16'
AutoCAD SHX Text
AutoCAD SHX Text SHEET NOTES 1. REMOVE AND REPLACE ALL CEILING DIFFUSERS ON THIS SHEET- SEE SHEET REMOVE AND REPLACE ALL CEILING DIFFUSERS ON THIS SHEET- SEE SHEET M101. 2. LOUVERS TO BE 4”, ALUMINUM, DRAINABLE BLAZE, ALUMINUM BIRD LOUVERS TO BE 4”, ALUMINUM, DRAINABLE BLAZE, ALUMINUM BIRD , ALUMINUM, DRAINABLE BLAZE, ALUMINUM BIRD SCREEN, ANODIZED BRONZE OR COLOR THAT MATCHES EXISTING. 3. REPLACE ALL VAV BOX CONTROLLERS, REUSE EXISTING CONTROL VALVE AND REPLACE ALL VAV BOX CONTROLLERS, REUSE EXISTING CONTROL VALVE AND THERMOSTAT WIRING.
AutoCAD SHX Text KEYED NOTES AHU-2 SUPPLY DUCT CONNECTED TO EXISTING SUPPLY DUCT TRANSITION TO EX. 65/18, SEE M402. ACI/ACO-1 DUCTLESS MINI-SPLIT UNIT, INSTALL ACI THIS VICINITY WITH 3/4" CONDENSATE DRAIN TO ADJACENT CAN WASH. CORE DRILL AND SEAL WALL PENETRATION. ROUTE REFRIGERANT PIPING THROUGH CORE-DRILLED AND SEALED EXTERIOR WALL PENETRATION. PROVIDE ALUMINUM JACKET ON ALL EXTERIOR REFRIGERANT PIPING. ACO-1 TO BE SET ON 4” HIGH CONCRETE HOUSEKEEPING HIGH CONCRETE HOUSEKEEPING PAD. IN-LINE EF-4 WITH NEW DUCTWORK, EXHAUST GRILLE AND CONNECTION TO CONDENSATE HOOD. DUCTWORK TO BE WELDED 304 STAINLESS STEEL, 22 GAUGE. USE EXISTING 24 X 12 LOUVER IN-LINE EF-1 WITH NEW DUCTWORK, EXHAUST GRILLE AND CONNECTION TO EXISTING DROPS TO DISHWASHER (300 CFM EACH). DUCTWORK TO BE WELDED 304 STAINLESS STEEL, 22 GAUGE. SAW-CUT EXTERIOR WALL FOR NEW 24 X 24 LOUVER. NEW AHU-1 SUPPLY BRANCH DUCT TO SERVE EXISTING VAV-10 AND VAV-11 (SERVING LINE), SEE M107. EMERGENCY VENTILATION "OFF" SWITCH, COORDINATE LOCATION WITH USER. REPLACE VAV BOX CONTROLLER, AND SPACE TEMPERATURE SENSOR. BACKDRAFT DAMPER FCD-1RL INSTALLED IN DUCTWORK AT RAF-1 DISCHARGE.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
S C
R I P
T I O
N M
A R
K D
A T
E
US Army Corps of Engineers
SHEET ID
S O
L I C
I T
A T
I O
N
N
O
D E
S I G
N E
D
B
Y
S I Z
E
S U
B M
I T
T E
D
B
Y
C O
N T
R A
U S
A
R M
Y
C
O R
E
N G
I N
E E
R S
M O
B I L
E
D
I S
T R
I C
T
M O
B I L
E
A
L A
B A
M A
C H
E C
K E
D
B
Y
D R
A W
N
B
Y
I S
S U
E
D
A T
E
A
B
C
D
E
F
G
2 3 4 5 6 7 8 9
P R
O J E
U M
B E
R
F I L
E
N
A M
E
S
A I N
T
J O
S E
H
R
E E
T
HHB Engineers, P.C.
A N
S I
D
M A
X W
E L
L
A
I
R
B
S
E
A
L
O T
S
D
I N
I N
G
F
A C
I L
I T
Y
B
U I L
D I N
G
H V
E
C T
R I C
P
A I R
S
M A
X W
E L
L
P
R O
J E
Q
S
S E
P T
- W
D
M E
F
J K
N
T L
H
T L
H
T L
H
M E
F
M d w g
M-106
F L O
A
N
M
E C
H A
N I C
A L
D
I N
I N
G
A
R E
A
AutoCAD SHX Text
DPT
AutoCAD SHX Text 1-03
AutoCAD SHX Text N
AutoCAD SHX Text M-106
AutoCAD SHX Text
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
%%UFLOOR PLAN - MECHANICAL - DINING AREA
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
VAV-12
AutoCAD SHX Text
AutoCAD SHX Text
VAV-13
AutoCAD SHX Text
AutoCAD SHX Text
VAV-14
AutoCAD SHX Text
AutoCAD SHX Text
VAV-15
AutoCAD SHX Text
PRATTVILLE, AL 334/358-2707
AutoCAD SHX Text
CONSULTING ENGINEERS
AutoCAD SHX Text
ENGINEERS/CONTRACTORS, INC.
AutoCAD SHX Text
100% FINAL READY FOR CONSTRUCTION
AutoCAD SHX Text
AutoCAD SHX Text 9/11/18
AutoCAD SHX Text
100% DESIGN SUBMITTAL
AutoCAD SHX Text A
AutoCAD SHX Text 8/13/18
AutoCAD SHX Text N:\2018jobs\218026\Drawings\MECH\B1484 KITCHEN UPGRADE\Sheets\MEF19006-M-106.dwg
AutoCAD SHX Text LaTarus Humphries
AutoCAD SHX Text
9/11/2018 9:08 AM
AutoCAD SHX Text
SCALE: 1/8" = 1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text 16'
AutoCAD SHX Text
AutoCAD SHX Text SHEET NOTES 1. CLEAN ALL CEILING DIFFUSERS, RETURN AND EXHAUST GRILLES CLEAN ALL CEILING DIFFUSERS, RETURN AND EXHAUST GRILLES ON THIS SHEET. SEE REFERENCE PLANS FOR SIZE AND TYPE.
AutoCAD SHX Text KEYED NOTES REPLACE ALL VAV BOX CONTROLLERS AND SPACE SENSORS, REUSE EXISTING CONTROL VALVE AND THERMOSTAT WIRING. CLEAN EXISTING DIFFUSER, TYPICAL - SEE NOTE 1
AutoCAD SHX Text
AutoCAD SHX Text H
AutoCAD SHX Text Mobile District
AutoCAD SHX Text of Engineers
AutoCAD SHX Text Approved
AutoCAD SHX Text Date
AutoCAD SHX Text US Army Corps
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text Revisions
AutoCAD SHX Text Description
AutoCAD SHX Text Symbol
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text File:
AutoCAD SHX Text Date:
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Designed By:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text
MOBILE, ALABAMA
AutoCAD SHX Text
CORPS OF ENGINEERS
AutoCAD SHX Text
U.S. ARMY ENGINEER DISTRICT
AutoCAD SHX Text
AutoCAD SHX Text Number:
AutoCAD SHX Text Reference
AutoCAD SHX Text Sheet
AutoCAD SHX Text M-17
AutoCAD SHX Text H
AutoCAD SHX Text
OTS BOT DORMITORIES
AutoCAD SHX Text
LARGE SCALE
AutoCAD SHX Text
TYPICAL MODULE HVAC PLANS
AutoCAD SHX Text
MAXWELL AIR FORCE BASE, ALABAMA
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text
NOVEMBER 1998
AutoCAD SHX Text
M17F224.DWG
AutoCAD SHX Text Drawing CADD Code:
AutoCAD SHX Text Solicitation Number:
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text B
AutoCAD SHX Text
TYPICAL MODULE HVAC PLAN
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
350/150 TOP REGISTER (TYP.)
AutoCAD SHX Text
BOTTOM ELEVATION 2 475 A.F.F.
AutoCAD SHX Text
TRANSITION FROM DUCT SIZE
AutoCAD SHX Text
TO REGISTER NECK SIZE.
AutoCAD SHX Text
DUCT SIZED AT VAV UNIT
AutoCAD SHX Text
OUTLET SIZE
AutoCAD SHX Text
HEATING COIL
AutoCAD SHX Text
VAV UNIT
AutoCAD SHX Text
200/200 EXHAUST REGISTER (TYP.)
AutoCAD SHX Text
200/100 EXHAUST DUCT
AutoCAD SHX Text
200/100 TURN UP IN 300/150
AutoCAD SHX Text
RISER DUCT IN CHASE. SEE RISER
AutoCAD SHX Text
DRAWING ON SHEET M-15.
AutoCAD SHX Text
MAIN SUPPLY DUCT
AutoCAD SHX Text
300/150 RETURN AIR REGISTER (TYP.)
AutoCAD SHX Text
BOTTOM ELEVATION 2 475 A.F.F.
AutoCAD SHX Text
STUBBED INTO PLENUM
AutoCAD SHX Text
FIRE DAMPER (TYP)
AutoCAD SHX Text
RETURN AIR DUCT OPENING
AutoCAD SHX Text
IN CORRIDOR ABOVE
AutoCAD SHX Text
CEILING.
AutoCAD SHX Text 20 mm HWS&R RUNOUTS
AutoCAD SHX Text
TO VAV BOXES (TYP.)
AutoCAD SHX Text
TRANSITION FROM RECTANGULAR
AutoCAD SHX Text
TO ROUND DUCT
AutoCAD SHX Text
300/200 RUNOUT TO
AutoCAD SHX Text
VAV BOX (TYP.)
AutoCAD SHX Text M-02
AutoCAD SHX Text
SECTION E-E, LAUNDRY ROOM
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text M-17
AutoCAD SHX Text E-E
AutoCAD SHX Text M-04
AutoCAD SHX Text
EF-2,4,6 (A&B)
AutoCAD SHX Text
TYPE HSN ISOLATOR (TYP)
AutoCAD SHX Text
F.C. (TYP)
AutoCAD SHX Text 10mm HANGER ROD (TYP)
AutoCAD SHX Text
AND RUN LENGTH
AutoCAD SHX Text
OF WALL.
AutoCAD SHX Text
300/250 DROP
AutoCAD SHX Text
DRYER CONNECTIONS
AutoCAD SHX Text 300/250
AutoCAD SHX Text SPIN INs FOR
AutoCAD SHX Text
WITH ROUND
AutoCAD SHX Text
TAP INTO DUCT
AutoCAD SHX Text
EACH END OF DUCT OPEN
AutoCAD SHX Text
WITH VOLUME DAMPER.
AutoCAD SHX Text
SIZE.
AutoCAD SHX Text
FULL LOUVER
AutoCAD SHX Text
EF OUTLET TO
AutoCAD SHX Text
TRANSITION FROM
AutoCAD SHX Text
W/ BIRD SCREEN
AutoCAD SHX Text
350/600 LOUVER
AutoCAD SHX Text 250/300
AutoCAD SHX Text 300/200
AutoCAD SHX Text
FCU-1A,B
AutoCAD SHX Text
480/1880 LOUVER
AutoCAD SHX Text
W/ BIRD SCREEN
AutoCAD SHX Text
HWS&R
AutoCAD SHX Text
SUPPLY DUCT
AutoCAD SHX Text M-06
AutoCAD SHX Text M-08
AutoCAD SHX Text M-10
AutoCAD SHX Text M-12
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
KNAPP, WILLIAM
AutoCAD SHX Text
KASTNER, J.B.
AutoCAD SHX Text T
AutoCAD SHX Text
ABOVE CLOSET AREA
AutoCAD SHX Text
300/150 TRANSFER DUCT WITH
AutoCAD SHX Text
FCU-2A,B
AutoCAD SHX Text
FCU-3A,B
AutoCAD SHX Text N.T.S.
AutoCAD SHX Text
%%UCOIL UNIT DETAIL
AutoCAD SHX Text
%%UHORIZONTAL FAN
AutoCAD SHX Text
HWS
AutoCAD SHX Text
HWR
AutoCAD SHX Text
TWO WAY CONTROL VALVE
AutoCAD SHX Text
STEEL CABINET
AutoCAD SHX Text
18 GAGE GALV
AutoCAD SHX Text
COIL
AutoCAD SHX Text
WITH CAM LOCK FASTENERS.
AutoCAD SHX Text
HINGED BOTTOM ACCESS
AutoCAD SHX Text
DISCHARGE GRILLE
AutoCAD SHX Text
ADJUSTABLE
AutoCAD SHX Text
SPRING ISOLATOR
AutoCAD SHX Text
ABOVE.
AutoCAD SHX Text
CONNECTED TO STRUCTURE
AutoCAD SHX Text 10mm THREADED ROD
AutoCAD SHX Text
SEE DETAIL
AutoCAD SHX Text
HEAT TRACED (SEE ELECTRICAL)
AutoCAD SHX Text
ALL EXTERIOR PIPING TO
AutoCAD SHX Text
TEMPORARY CONNECTIONS
AutoCAD SHX Text
FLANGE (TYP)
AutoCAD SHX Text
W/GATE VALVE
AutoCAD SHX Text
PRESSURE GAUGE
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
SENSOR (TYP)
AutoCAD SHX Text
WELL FOR DDC TEMPERATURE
AutoCAD SHX Text
(TYP) FOR EMERGENCY/
AutoCAD SHX Text 125mm%%c TEE WITH BLIND FLANGE
AutoCAD SHX Text
CHILLED WATER S & R
AutoCAD SHX Text
BLIND
AutoCAD SHX Text
FLANGE
AutoCAD SHX Text N.T.S.
AutoCAD SHX Text
RIGHT SIDE
AutoCAD SHX Text
%%UAIR-COOLED CHILLER PIPING CONNECTION DETAIL
AutoCAD SHX Text
CONTROL PANEL
AutoCAD SHX Text 150mm CONCRETE PAD
AutoCAD SHX Text
FLEXIBLE PIPE CONNECTION
AutoCAD SHX Text
AT 23 WATTS PER METER
AutoCAD SHX Text
MAX-67-155
DACA01-99-B-0004
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text
NOVEMBER 1998
AutoCAD SHX Text
M16F224.DWG
AutoCAD SHX Text Drawing CADD Code:
AutoCAD SHX Text Solicitation Number:
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text
OTS BOT DORMITORIES
AutoCAD SHX Text
BLDG A & B
AutoCAD SHX Text
MECH ROOM SECTIONS
AutoCAD SHX Text
MAXWELL AIR FORCE BASE, ALABAMA
AutoCAD SHX Text H
AutoCAD SHX Text M-16
AutoCAD SHX Text Number:
AutoCAD SHX Text Reference
AutoCAD SHX Text Sheet
AutoCAD SHX Text
AutoCAD SHX Text
MOBILE, ALABAMA
AutoCAD SHX Text
CORPS OF ENGINEERS
AutoCAD SHX Text
U.S. ARMY ENGINEER DISTRICT
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Designed By:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text Date:
AutoCAD SHX Text File:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
OSHA PERSONNEL GUARD
AutoCAD SHX Text
BY FAN MANUFACTURER
AutoCAD SHX Text
BY FAN MANUFACTURER
AutoCAD SHX Text
BY FAN MANUFACTURER
AutoCAD SHX Text
BACKDRAFT DAMPER
AutoCAD SHX Text
WALL MOUNT COLLAR
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text Symbol
AutoCAD SHX Text Revisions
AutoCAD SHX Text Description
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text US Army Corps
AutoCAD SHX Text Date
AutoCAD SHX Text Approved
AutoCAD SHX Text Mobile District
AutoCAD SHX Text of Engineers
AutoCAD SHX Text H
AutoCAD SHX Text
AutoCAD SHX Text
SCREENED AIR INLET
AutoCAD SHX Text
90 DEG PVC ELBOW
AutoCAD SHX Text 80mm HWS&R
AutoCAD SHX Text
BRACE AS REQUIRED.
AutoCAD SHX Text
MOUNT FAN IN PLENUM.
AutoCAD SHX Text
PLENUM BEHIND.
AutoCAD SHX Text
W/ SHT METAL
AutoCAD SHX Text
WINDOW SIZED LOUVER.
AutoCAD SHX Text 125mm CHWS&R
AutoCAD SHX Text
EF-1A,B
AutoCAD SHX Text
MECH ROOM.
AutoCAD SHX Text
UP TO 2ND FLOOR
AutoCAD SHX Text 100mm CHWS&R UP
AutoCAD SHX Text 80mm HWS&R UP
AutoCAD SHX Text
510/350 OA DUCT
AutoCAD SHX Text
FIRE DAMPER
AutoCAD SHX Text 32mm HWS&R
AutoCAD SHX Text 65mm CHWS&R
AutoCAD SHX Text
SEPERATOR
AutoCAD SHX Text
LINE SIZE AIR
AutoCAD SHX Text B-1A,B
AutoCAD SHX Text
UNDERGROUND TO CHILLER
AutoCAD SHX Text 125mm CHWS&R
AutoCAD SHX Text
CONTROL PANELS
AutoCAD SHX Text
PENETRATIONS
AutoCAD SHX Text
ABOVE WINDOW
AutoCAD SHX Text
MUFFLERS
AutoCAD SHX Text
INTAKE
AutoCAD SHX Text
AHU-1A,B
AutoCAD SHX Text P-1A,B
AutoCAD SHX Text B-2A,B
AutoCAD SHX Text 510/1010
AutoCAD SHX Text 660/510
AutoCAD SHX Text 510/1570
AutoCAD SHX Text
EUH-1A
AutoCAD SHX Text
DOMESTIC WATER HEATER
AutoCAD SHX Text 32mm HWS&R
AutoCAD SHX Text
DOMESTIC HOT WATER STORAGE TANK
AutoCAD SHX Text 125mm CHWS&R
AutoCAD SHX Text 80mm HWS&R
AutoCAD SHX Text 125mm CHWS&R
AutoCAD SHX Text 660/510
AutoCAD SHX Text M-01
AutoCAD SHX Text
SECTION A-A, 1ST FLOOR MECHANICAL ROOM
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text M-16
AutoCAD SHX Text A-A
AutoCAD SHX Text M-07
AutoCAD SHX Text
SECTION B-B, 1ST FLOOR MECHANICAL ROOM
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text B-B
AutoCAD SHX Text M-01
AutoCAD SHX Text M-16
AutoCAD SHX Text M-07
AutoCAD SHX Text M-09
AutoCAD SHX Text C-C
AutoCAD SHX Text M-16
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text
SECTION C-C, 2ND FLOOR MECHANICAL ROOM
AutoCAD SHX Text M-03
AutoCAD SHX Text
AHU-2A,B
AutoCAD SHX Text
400/760 DUCT
AutoCAD SHX Text
400/760 TAP INTO
AutoCAD SHX Text
SHT METAL PLENUM,
AutoCAD SHX Text
W/ FULL LOUVER SIZE
AutoCAD SHX Text
PLENUM.
AutoCAD SHX Text 910mm DEEP.
AutoCAD SHX Text W/ A.L.
AutoCAD SHX Text
TAP INTO RETURN DUCT
AutoCAD SHX Text
WINDOW SIZED LOUVER
AutoCAD SHX Text
810/1010 RETURN DUCT
AutoCAD SHX Text
25 HWS&R
AutoCAD SHX Text 65mm HWS&R UP
AutoCAD SHX Text
560/1570 SUPPLY DUCT
AutoCAD SHX Text 100mm CHWS&R UP
AutoCAD SHX Text 100mm CHWS&R DN
AutoCAD SHX Text 80mm HWS&R DN
AutoCAD SHX Text 40mm HWS&R
AutoCAD SHX Text 80mm CHWS&R
AutoCAD SHX Text
FIRE DAMPER (TYP.)
AutoCAD SHX Text A.M.D.
AutoCAD SHX Text
VOLUME DAMPER
AutoCAD SHX Text 660/1920
AutoCAD SHX Text 660/1920
AutoCAD SHX Text
340/610 DUCT
AutoCAD SHX Text 610/510
AutoCAD SHX Text
20 HWS&R RUNOUTS
AutoCAD SHX Text
TO VAV BOX
AutoCAD SHX Text M-14
AutoCAD SHX Text
SECTION D-D, ATTIC MECHANICAL ROOM
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text M-16
AutoCAD SHX Text D-D
AutoCAD SHX Text 300/300
AutoCAD SHX Text
ACCESS PANEL
AutoCAD SHX Text 300/300
AutoCAD SHX Text
ACCESS PANEL
AutoCAD SHX Text
FLOOR SLAB.
AutoCAD SHX Text
AT ALL DUCT PENETRATIONS THROUGH
AutoCAD SHX Text
1. PROVIDE 1-1/2 HR. FIRE DAMPERS
AutoCAD SHX Text
NOTE:
AutoCAD SHX Text
3RD FLOOR CEILING PLENUM.
AutoCAD SHX Text
DROP DUCT UNDER SLAB TO
AutoCAD SHX Text
2. THESE LOUVERS AND PLENUMS ARE
AutoCAD SHX Text
SHAPED TO FIT THE FULL SIZE OF
AutoCAD SHX Text
THE ARCHITECTURAL OPENINGS SHOWN
AutoCAD SHX Text
ON THE ARCHITECTURAL DRAWINGS.
AutoCAD SHX Text
32 HWS&R
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
KNAPP, WILLIAM
AutoCAD SHX Text
KASTNER, J.B.
AutoCAD SHX Text 150 mm CONCRETE EQUIPMENT PAD (TYP)
AutoCAD SHX Text 910/510
AutoCAD SHX Text 760/510
AutoCAD SHX Text
LOBBY AREA.
AutoCAD SHX Text
ABOVE CEILING IN
AutoCAD SHX Text
960/960 RETURN
AutoCAD SHX Text
DUCT. STUB INTO
AutoCAD SHX Text
CEILING PLENUM.
AutoCAD SHX Text
RAF-1 (AHU-3A)
AutoCAD SHX Text
RAF-2 (AHU-3B)
AutoCAD SHX Text
EUH-3A,B
AutoCAD SHX Text
510/1520 OA DUCT
AutoCAD SHX Text A.M.D.
AutoCAD SHX Text
510/1520 OA DUCT
AutoCAD SHX Text
DROP TO RETURN
AutoCAD SHX Text
PLENUM AT AHU.
AutoCAD SHX Text
100 CHWS&R, 50 HWS&R
AutoCAD SHX Text
TO ATTIC SPACE.
AutoCAD SHX Text
AHU-3A,B
AutoCAD SHX Text
510/1520 RA DUCT
AutoCAD SHX Text
TRANSITION TO 960/960
AutoCAD SHX Text
DUCT TO RAF.
AutoCAD SHX Text
150/300 SUPPLY DUCT
AutoCAD SHX Text
TO COMM ROOM IN ATTIC.
AutoCAD SHX Text
TO COMM ROOM IN ATTIC.
AutoCAD SHX Text
150/300 SUPPLY DUCT
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
DORMER
AutoCAD SHX Text
DORMER
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text 1210mm DEEP. PROVIDE
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text
SEE NOTE 1.
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text 1210mm DEEP. PROVIDE
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text
SEE NOTE 1.
AutoCAD SHX Text
MAX-67-154
AutoCAD SHX Text
DACA01-99-B-0004
AutoCAD SHX Text
FC
AutoCAD SHX Text N O T E :
AutoCAD SHX Text
MADE IN THE FIELD
AutoCAD SHX Text
INDICATES CHANGES
AutoCAD SHX Text
THIS SYMBOL
AutoCAD SHX Text
AS BUILT DRAWING
FC
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Sheet
AutoCAD SHX Text Reference
AutoCAD SHX Text Number:
AutoCAD SHX Text File:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Designed By:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Date:
AutoCAD SHX Text Solicitation Number:
AutoCAD SHX Text Description
AutoCAD SHX Text Date
AutoCAD SHX Text Symbol
AutoCAD SHX Text Revisions
AutoCAD SHX Text Approved
AutoCAD SHX Text
U.S. ARMY ENGINEER DISTRICT
AutoCAD SHX Text
CORPS OF ENGINEERS
AutoCAD SHX Text
MOBILE, ALABAMA
AutoCAD SHX Text M-15
AutoCAD SHX Text US Army Corps
AutoCAD SHX Text of Engineers
AutoCAD SHX Text Mobile District
AutoCAD SHX Text Drawing CADD Code:
AutoCAD SHX Text
MAXWELL AIR FORCE BASE, ALABAMA
AutoCAD SHX Text
M15F224.DWG
AutoCAD SHX Text
NOVEMBER 1998
AutoCAD SHX Text
DUCT RISERS
AutoCAD SHX Text
BLDG A & B
AutoCAD SHX Text
OTS BOT DORMITORIES
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text
TYPICAL BATHROOM EXHAUST RISER
AutoCAD SHX Text 200/200 E.R.
AutoCAD SHX Text
TYP. FOR TOILETS
AutoCAD SHX Text
23.6 L/S
AutoCAD SHX Text
VOLUME DAMPER (TYP.)
AutoCAD SHX Text
200/200 ACCESS PANEL IN CEILING (TYP.)
AutoCAD SHX Text 150/300
AutoCAD SHX Text 150/300
AutoCAD SHX Text 150/300
AutoCAD SHX Text 100/200
AutoCAD SHX Text
VOLUME DAMPER (TYP.)
AutoCAD SHX Text
MAIN EXHAUST DUCT
AutoCAD SHX Text
TO EXHAUST FAN.
AutoCAD SHX Text
TYPICAL SECTION SHOWING VAV BOXES
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text
TO RH COIL
AutoCAD SHX Text
20 RUNOUTS
AutoCAD SHX Text
REHEAT COIL
AutoCAD SHX Text
VAV BOX W/
AutoCAD SHX Text
MAIN HWS&R
AutoCAD SHX Text 132 L/S
AutoCAD SHX Text 250/130 T.R.
AutoCAD SHX Text B.E. 2 475 A.F.F.
AutoCAD SHX Text
NOTE: SIZES ARE APPLICABLE TO JANITOR CLOSET RISERS, ALSO.
AutoCAD SHX Text
MAIN SUPPLY DUCT
AutoCAD SHX Text
SEE DRAWINGS FOR SIZES.
AutoCAD SHX Text
SEE DRAWINGS FOR SIZES.
AutoCAD SHX Text 300/150 R.A.R.
AutoCAD SHX Text B.E. 2 475 A.F.F.
AutoCAD SHX Text 132 L/S
AutoCAD SHX Text
350/150 TRANSFER DUCT
AutoCAD SHX Text
RETURN DUCT SHOWN
AutoCAD SHX Text
ON THIS FLOOR FOR
AutoCAD SHX Text
CLARIFICATION. DUCTS
AutoCAD SHX Text
100/200 (TYP.)
AutoCAD SHX Text 150/300
AutoCAD SHX Text 150/300
AutoCAD SHX Text 150/300
AutoCAD SHX Text 560 mm (TYP.)
AutoCAD SHX Text
100/200 TURN
AutoCAD SHX Text
UP IN 150/300
AutoCAD SHX Text
CHASE AND RUN
AutoCAD SHX Text 560 mm. (TYP.)
AutoCAD SHX Text
TYPICAL SECTION AT DEEP BEAM, THIRD FLOOR
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text 1010/350
AutoCAD SHX Text
HWS&R
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
KNAPP, WILLIAM
AutoCAD SHX Text
KASTNER, J.B.
AutoCAD SHX Text
350/150 TRANSFER DUCT
AutoCAD SHX Text
WITH FIRE DAMPER
AutoCAD SHX Text
LOCATED ABOVE CLOSETS.
AutoCAD SHX Text
MAX-67-153
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Sheet
AutoCAD SHX Text Reference
AutoCAD SHX Text Number:
AutoCAD SHX Text File:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Designed By:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Date:
AutoCAD SHX Text Solicitation Number:
AutoCAD SHX Text Description
AutoCAD SHX Text Date
AutoCAD SHX Text Symbol
AutoCAD SHX Text Revisions
AutoCAD SHX Text Approved
AutoCAD SHX Text
U.S. ARMY ENGINEER DISTRICT
AutoCAD SHX Text
CORPS OF ENGINEERS
AutoCAD SHX Text
MOBILE, ALABAMA
AutoCAD SHX Text M-14
AutoCAD SHX Text US Army Corps
AutoCAD SHX Text of Engineers
AutoCAD SHX Text Mobile District
AutoCAD SHX Text Drawing CADD Code:
AutoCAD SHX Text
MAXWELL AIR FORCE BASE, ALABAMA
AutoCAD SHX Text
ATTIC FLOOR PLAN
AutoCAD SHX Text
BLDG A, B - ATTIC PLAN
AutoCAD SHX Text
OTS BOT DORMITORIES
AutoCAD SHX Text
SCALE: 1:100
AutoCAD SHX Text
ATTIC FLOOR PART PLAN
AutoCAD SHX Text
MATCHLINE
AutoCAD SHX Text
SEE DRAWING M-13
AutoCAD SHX Text
EF-10A,B
AutoCAD SHX Text
INTRUSION. (TYPICAL)
AutoCAD SHX Text
TAP INTO PLENUM. SEAL
AutoCAD SHX Text
AROUND PENETRATION TO
AutoCAD SHX Text
PREVENT MOISTURE
AutoCAD SHX Text
BATHROOMS. (TYP.)
AutoCAD SHX Text
300/150 EXHAUST
AutoCAD SHX Text
RISER DOWN TO
AutoCAD SHX Text
300/150 RUNOUTS (TYP.)
AutoCAD SHX Text
VOLUME DAMPER (TYP.)
AutoCAD SHX Text 300/200
AutoCAD SHX Text 350/300
AutoCAD SHX Text 400/300
AutoCAD SHX Text 400/350
AutoCAD SHX Text 460/350
AutoCAD SHX Text 510/460
AutoCAD SHX Text 300/300
AutoCAD SHX Text 300/200
AutoCAD SHX Text
EUH-2A,B
AutoCAD SHX Text
BUILDING B
AutoCAD SHX Text
BUILDING A
AutoCAD SHX Text N
AutoCAD SHX Text
AT EVERY SLAB PENETRATION
AutoCAD SHX Text
1-1/2 HR. RATED FIRE DAMPER (TYP.)
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
KNAPP, WILLIAM
AutoCAD SHX Text
KASTNER, J.B.
AutoCAD SHX Text
BOXES SHALL BE 250/200 UNLESS OTHERWISE NOTED.
AutoCAD SHX Text
4. DUCT RUNOUTS FROM MAINS TO TRANSITIONS AT VAV
AutoCAD SHX Text
AND FLEX CONNECTIONS ON UNITS.
AutoCAD SHX Text
MOTOR AND FAN CONTRACTOR MUST PROVIDE VIBRATION ISOLATORS
AutoCAD SHX Text
MOTOR AND FAN. IF UNIT PROVIDED DOES NOT HAVE ISOLATED
AutoCAD SHX Text
3. AIR HANDLING UNITS SHOWN HAVE INTERNALLY ISOLATED
AutoCAD SHX Text
2. ALL DUCT DIMENSIONS SHOWN ARE INSIDE METAL.
AutoCAD SHX Text B. DUCTS DOWN STREAM OF VAV BOXES; 25mm W.G.
AutoCAD SHX Text A. DUCTS UPSTREAM OF VAV BOXES; 50mm W.G.
AutoCAD SHX Text
1. DUCT PRESSUSE CLASSIFICATION AND SEAL CLASS
AutoCAD SHX Text
SEAL CLASS 'C'.
AutoCAD SHX Text
SEAL CLASS 'B'.
AutoCAD SHX Text
SHALL BE AS FOLLOWS:
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text C. EXHAUST DUCTS; 15mm W.G., SEAL CLASS 'C'.
AutoCAD SHX Text D. RETURN DUCTS; 25mm W.G., SEAL CLASS 'C'.
AutoCAD SHX Text AT 7 WATTS PER 300mm.
AutoCAD SHX Text
PIPING IN ATTIC SPACE
AutoCAD SHX Text
SPACE. HEAT TAPE ALL
AutoCAD SHX Text M-16
AutoCAD SHX Text M-14
AutoCAD SHX Text D-D
AutoCAD SHX Text M-16
AutoCAD SHX Text M-14
AutoCAD SHX Text D-D
AutoCAD SHX Text
THROUGH FLOOR SLAB.
AutoCAD SHX Text
AT ALL DUCT PENETRATIONS
AutoCAD SHX Text
PROVIDE 1-1/2 HR. FIRE DAMPERS
AutoCAD SHX Text
NOTE:
AutoCAD SHX Text B.E. 2 000 A.F.F.
AutoCAD SHX Text
300/300 TRANSFER
AutoCAD SHX Text
DUCT WITH R.A.G.
AutoCAD SHX Text
ON EACH SIDE OF
AutoCAD SHX Text
WALL. TYP. FOR 2.
AutoCAD SHX Text
THIRD FLOOR
AutoCAD SHX Text
300/150 DOWN TO
AutoCAD SHX Text 95 L/S
AutoCAD SHX Text B.E. 2 000 A.F.F.
AutoCAD SHX Text 300/150 T.R.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text 1210mm DEEP. PROVIDE
AutoCAD SHX Text A.M.D.
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text
1520/510 TO DORMER
AutoCAD SHX Text
3RD FLOOR CEILING PLENUM.
AutoCAD SHX Text
DROP DUCTS UNDER SLAB TO
AutoCAD SHX Text
ROUTED IN ATTIC
AutoCAD SHX Text
100 CHWS&R
AutoCAD SHX Text
50 HWS&R
AutoCAD SHX Text
AHU-3A,B
AutoCAD SHX Text
SCALE: 1:50
AutoCAD SHX Text
ENLARGED ATTIC PLAN AT MECH ROOM
AutoCAD SHX Text
RISER DOWN TO
AutoCAD SHX Text
BATHROOMS. (TYP.)
AutoCAD SHX Text
300/150 EXHAUST
AutoCAD SHX Text
RAF-1 (AHU-3A)
AutoCAD SHX Text
RAF-2 (AHU-3B)
AutoCAD SHX Text
960/960 RETURN
AutoCAD SHX Text
DUCT DOWN TO THIRD
AutoCAD SHX Text
FLOOR PLENUM.
AutoCAD SHX Text
AIR STRAIGHTENING VANES
AutoCAD SHX Text
AIR FLOW MEASURING STATION
AutoCAD SHX Text
AIR FLOW MEASURING STATION
AutoCAD SHX Text
SEE ENLARGED PLAN ABOVE
AutoCAD SHX Text
FOR THIS AREA.
AutoCAD SHX Text
LOUVER
AutoCAD SHX Text 960/960
AutoCAD SHX Text
AHU OPENING SIZE PLENUM,
AutoCAD SHX Text
1060 DEEP.
AutoCAD SHX Text
TAP INTO PLENUM
AutoCAD SHX Text
WITH 1520/510 OA
AutoCAD SHX Text
DUCT
AutoCAD SHX Text
EUH-2A,B
AutoCAD SHX Text
TRANSITION FROM AHU OUTLET SIZE
AutoCAD SHX Text
TO 910/1020. DROP AND SPLIT
AutoCAD SHX Text
INTO 910/510 AND 760/510 DUCTS
AutoCAD SHX Text
AS SHOWN ON THIRD FLOOR PLAN.
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text 300mm DEEP. PROVIDE
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text 1210mm DEEP. PROVIDE
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text 300/150 E.R.
AutoCAD SHX Text B.E. 300 A.F.F.
AutoCAD SHX Text 95 L/S
AutoCAD SHX Text
TRANSITION TO 1520/510
AutoCAD SHX Text
TO DORMER LOUVER
AutoCAD SHX Text
TO DORMER LOUVER
AutoCAD SHX Text
TRANSITION TO 1520/510
AutoCAD SHX Text 960/960
AutoCAD SHX Text
HVAC CONTROL PANEL
AutoCAD SHX Text
VENT
AutoCAD SHX Text
THRU
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
VENT
AutoCAD SHX Text
THRU
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
AT EVERY SLAB PENETRATION
AutoCAD SHX Text
1-1/2 HR. RATED FIRE DAMPER (TYP.)
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text No.
AutoCAD SHX Text
AutoCAD SHX Text
REVISED PENETRATION RATING
AutoCAD SHX Text
8 JAN 99
AutoCAD SHX Text
JBK
AutoCAD SHX Text
AMENDMENT 0003
AutoCAD SHX Text
NOVEMBER 1998
AutoCAD SHX Text
MAX-67-152
AutoCAD SHX Text
M14F224.DWG
AutoCAD SHX Text
DACA01-99-B-0004
AutoCAD SHX Text
960/960 RETURN DUCT
AutoCAD SHX Text
W/ MOTORIZED CONTROL DAMPER
AutoCAD SHX Text
TAP INTO RETURN AIR PLENUM
AutoCAD SHX Text
AT AHU.
AutoCAD SHX Text A.M.D.
AutoCAD SHX Text A.M.D.
AutoCAD SHX Text
FC
AutoCAD SHX Text
FC
AutoCAD SHX Text N O T E :
AutoCAD SHX Text
MADE IN THE FIELD
AutoCAD SHX Text
INDICATES CHANGES
AutoCAD SHX Text
THIS SYMBOL
AutoCAD SHX Text
AS BUILT DRAWING
FC
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Sheet
AutoCAD SHX Text Reference
AutoCAD SHX Text Number:
AutoCAD SHX Text File:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text Designed By:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Date:
AutoCAD SHX Text Solicitation Number:
AutoCAD SHX Text Description
AutoCAD SHX Text Date
AutoCAD SHX Text Symbol
AutoCAD SHX Text Revisions
AutoCAD SHX Text Approved
AutoCAD SHX Text
U.S. ARMY ENGINEER DISTRICT
AutoCAD SHX Text
CORPS OF ENGINEERS
AutoCAD SHX Text
MOBILE, ALABAMA
AutoCAD SHX Text M-13
AutoCAD SHX Text US Army Corps
AutoCAD SHX Text of Engineers
AutoCAD SHX Text Mobile District
AutoCAD SHX Text Drawing CADD Code:
AutoCAD SHX Text
MAXWELL AIR FORCE BASE, ALABAMA
AutoCAD SHX Text
M13F224.DWG
AutoCAD SHX Text
NOVEMBER 1998
AutoCAD SHX Text
ATTIC FLOOR PLAN
AutoCAD SHX Text
BLDG A, B - ATTIC PLAN
AutoCAD SHX Text
OTS BOT DORMITORIES
AutoCAD SHX Text
SCALE: 1:100
AutoCAD SHX Text
ATTIC FLOOR PART PLAN
AutoCAD SHX Text
MATCHLINE
AutoCAD SHX Text
SEE DRAWING M-14
AutoCAD SHX Text
EF-9A,B
AutoCAD SHX Text
300/150 RUNOUTS (TYP.)
AutoCAD SHX Text
VOLUME DAMPER (TYP.)
AutoCAD SHX Text 300/200
AutoCAD SHX Text 350/300
AutoCAD SHX Text 400/400
AutoCAD SHX Text 400/350
AutoCAD SHX Text 460/510
AutoCAD SHX Text 610/510
AutoCAD SHX Text
TAP INTO PLENUM. SEAL
AutoCAD SHX Text
AROUND PENETRATION TO
AutoCAD SHX Text
PREVENT MOISTURE
AutoCAD SHX Text
INTRUSION. (TYPICAL)
AutoCAD SHX Text 350/300
AutoCAD SHX Text 300/250
AutoCAD SHX Text 300/100
AutoCAD SHX Text
BUILDING B
AutoCAD SHX Text N
AutoCAD SHX Text
BUILDING A
AutoCAD SHX Text
1-1/2 HR. RATED FIRE DAMPER (TYP.)
AutoCAD SHX Text
AT EVERY SLAB PENETRATION
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
THAMES, W.C.
AutoCAD SHX Text
KNAPP, WILLIAM
AutoCAD SHX Text
KASTNER, J.B.
AutoCAD SHX Text
BOXES SHALL BE 250/200 UNLESS OTHERWISE NOTED.
AutoCAD SHX Text
4. DUCT RUNOUTS FROM MAINS TO TRANSITIONS AT VAV
AutoCAD SHX Text
AND FLEX CONNECTIONS ON UNITS.
AutoCAD SHX Text
MOTOR AND FAN CONTRACTOR MUST PROVIDE VIBRATION ISOLATORS
AutoCAD SHX Text
MOTOR AND FAN. IF UNIT PROVIDED DOES NOT HAVE ISOLATED
AutoCAD SHX Text
3. AIR HANDLING UNITS SHOWN HAVE INTERNALLY ISOLATED
AutoCAD SHX Text
2. ALL DUCT DIMENSIONS SHOWN ARE INSIDE METAL.
AutoCAD SHX Text B. DUCTS DOWN STREAM OF VAV BOXES; 25mm W.G.
AutoCAD SHX Text A. DUCTS UPSTREAM OF VAV BOXES; 50mm W.G.
AutoCAD SHX Text
1. DUCT PRESSUSE CLASSIFICATION AND SEAL CLASS
AutoCAD SHX Text
SEAL CLASS 'C'.
AutoCAD SHX Text
SEAL CLASS 'B'.
AutoCAD SHX Text
SHALL BE AS FOLLOWS:
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text C. EXHAUST DUCTS; 15mm W.G., SEAL CLASS 'C'.
AutoCAD SHX Text D. RETURN DUCTS; 25mm W.G., SEAL CLASS 'C'.
AutoCAD SHX Text 460/510
AutoCAD SHX Text 300/200
AutoCAD SHX Text 300/150
AutoCAD SHX Text 300/250
AutoCAD SHX Text
100 CHWS&R
AutoCAD SHX Text
50 HWS&R
AutoCAD SHX Text
50 HWS&R
AutoCAD SHX Text
100 CHWS&R
AutoCAD SHX Text
DOWN TO 3RD
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
HEAT TAPE ALL EXPOSED
AutoCAD SHX Text
PIPING IN ATTIC AT
AutoCAD SHX Text 7 WATTS PER 300mm.
AutoCAD SHX Text
W/ FULL SHT METAL PLENUM,
AutoCAD SHX Text 300mm DEEP. PROVIDE
AutoCAD SHX Text
ARCHITECTURAL LOUVER (TYP.)
AutoCAD SHX Text
AS NECESSARY.
AutoCAD SHX Text
SUPPORTS FROM ATTIC FLOOR
AutoCAD SHX Text 600/600 E.R.
AutoCAD SHX Text
W/ FIRE DAMPER
AutoCAD SHX Text
IN ELEVATOR CAP
AutoCAD SHX Text
VENT
AutoCAD SHX Text
THRU
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
VENT
AutoCAD SHX Text
THRU
AutoCAD SHX Text
OPTION 4 -
AutoCAD SHX Text
SEE ARCH DWGS
AutoCAD SHX Text
IF THIS OPTION IS
AutoCAD SHX Text
NOT EXERCISED, PROVIDE
AutoCAD SHX Text
PROPER TRANSITIONS
AutoCAD SHX Text
FOR DUCTWORK AS
AutoCAD SHX Text
NECESSARY.
AutoCAD SHX Text
MAX-67-151
DORM
ROOM
TLT
7595A
TLT
7594A
TLT
7599A
DORM
ROOM
TLT
7603A
DORM
ROOM
TLT
7606A
DORM
ROOM
DORM
ROOM
TLT
7608A
DORM
ROOM
TLT
7611A
TLT
7615A
DORM
ROOM
TLT
7619A
DORM
ROOM
TLT
7598A
DORM
ROOM
DORM
ROOM
TLT
7602A
DORM
ROOM
DORM
ROOM
TLT
7610A
DORM
ROOM
TLT
7614A
DORM
ROOM
DORM
ROOM
TLT
7618A
STAIR
VEST
STORAGE
CORRIDOR
STAIR #2
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
CORRIDOR
ELEC
STORAGE
CLASS
ROOM
STAIR
VEST
STORAGE
COMM
ROOM
205A
UP DN
STAIR #3STAIR #1
UP DN UP DN
DORM
ROOM
TLT
7603A
DORM
ROOM
STAIR #2
STORAGE
201CLASS
ROOM
COMM
ROOM
205A
UP DN
AutoCAD SHX Text M2.2
AutoCAD SHX Text
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
SECOND FLOOR MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text
3/4" UP
AutoCAD SHX Text
1/2" UP
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text M2.2
AutoCAD SHX Text
AutoCAD SHX Text M2.2
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text M2.2
AutoCAD SHX Text
AutoCAD SHX Text M2.2
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
TYPICAL DORM ROOM PLAN - SECOND FLOOR
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text R20
AutoCAD SHX Text R20
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text E8
AutoCAD SHX Text
AutoCAD SHX Text S12
AutoCAD SHX Text
AutoCAD SHX Text S12
AutoCAD SHX Text
AutoCAD SHX Text NOTES: 1. IF FCU-2 IS USED IN DORM ROOM, PROVIDE S18 GRILLE AT 400 CFM. IF FCU-2 IS USED IN DORM ROOM, PROVIDE S18 GRILLE AT 400 CFM. 2. FCU LOCATION SHOWN IS DIAGRAMMATIC FOR CLARITY. FCU SHALL BE FCU LOCATION SHOWN IS DIAGRAMMATIC FOR CLARITY. FCU SHALL BE INSTALLED ABOVE LAY-IN CEILING IN BULKHEAD IN SAME LOCATION AS PREVIOUS FCU. COORDINATE WITH ARCH. RCP.
AutoCAD SHX Text M2.2
AutoCAD SHX Text
AutoCAD SHX Text M2.2
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
LARGE SCALE MECHANICAL PLAN - ROOM 205
AutoCAD SHX Text N
AutoCAD SHX Text S18
AutoCAD SHX Text
AutoCAD SHX Text S18
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text R20
AutoCAD SHX Text R20
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text R16
AutoCAD SHX Text R16
AutoCAD SHX Text R16
AutoCAD SHX Text
BI.1/M2.2
AutoCAD SHX Text
SECOND FLOOR MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text
JKN
AutoCAD SHX Text
WDS
AutoCAD SHX Text
AS NOTED
AutoCAD SHX Text
SCALE: 1/8" = 1'-0"
AutoCAD SHX Text 8'
AutoCAD SHX Text
AutoCAD SHX Text 16'
AutoCAD SHX Text 4'
AutoCAD SHX Text
SCALE: 1/4" = 1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text
AutoCAD SHX Text 8'
AutoCAD SHX Text 2'
AutoCAD SHX Text KEYED NOTES INSTALL GRILLE IN WALL 6" BELOW CEILING WITH BLADES ANGLED UPWARD. INSTALL GRILLE IN WALL WITH BLADES ANGLED UPWARD.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text SHEET NOTES: 1. INSTALL INSULATION ON ALL NEW AND EXISTING CHILLED WATER PIPING. FIELD INSTALL INSULATION ON ALL NEW AND EXISTING CHILLED WATER PIPING. FIELD VERIFY EXISTING PIPE SIZES. INSULATION SHALL BE PER SPECIFICATIONS. 2. REFER TO B / M0.4 FOR FCU PIPING CONNECTION DETAIL. REFER TO B / M0.4 FOR FCU PIPING CONNECTION DETAIL. 3. CONNECT NEW FCU'S TO EXISTING CONDENSATE DRAIN PIPING. CONNECT NEW FCU'S TO EXISTING CONDENSATE DRAIN PIPING. 4. RETURN GRILLES SERVING FAN COIL UNITS SHALL BE INSTALLED IN CEILING RETURN GRILLES SERVING FAN COIL UNITS SHALL BE INSTALLED IN CEILING GRID UNDERNEATH UNITS. NO DUCT CONNECTION SHALL BE EXTENDED FROM GRILLE TO FCU, AND AIR SHALL BE ABLE TO PASS FREELY FROM THE ROOM INTO THE FCU AIR INTAKE.
AutoCAD SHX Text
MAXWELL AIR FORCE BASE
AutoCAD SHX Text
MAXWELL AFB, ALABAMA 36112
AutoCAD SHX Text
MAXWELL AFB, AL
AutoCAD SHX Text
RENOVATION ROTC BLDG 1430
AutoCAD SHX Text Number:
AutoCAD SHX Text Reference
AutoCAD SHX Text Sheet
AutoCAD SHX Text
PNQS 16-5244
AutoCAD SHX Text
5 JANUARY 2018
AutoCAD SHX Text Symbol
AutoCAD SHX Text Description
AutoCAD SHX Text Scale:
AutoCAD SHX Text Date:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text Designed By:
AutoCAD SHX Text
42 CES/CEN
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Drawing Sheet File:
AutoCAD SHX Text Drawing Folder:
AutoCAD SHX Text Date
AutoCAD SHX Text Approved
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text
AutoCAD SHX Text 1:1
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text Revisions
AutoCAD SHX Text 1430-5244
AutoCAD SHX Text
AutoCAD SHX Text
06AUG2018
AutoCAD SHX Text
RJ
AutoCAD SHX Text
06AUG2018 CHANGES
AutoCAD SHX Text R:\Indesign\maxwell\1430\PNQS 16-5245 Renovate 1430 1433 1434\PNQS165244 Renovate ROTC Dorm 1430\8-6-18 DRAWINGS\Mech\M2.2 SECOND FLOOR MECHANICAL PLAN - BLDG 1430.dwg
AutoCAD SHX Text
4/22/2026 9:11:47 AM
BREDLOW, SANDRA Y CTR USAF AETC 42 CES/CENMP
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
STORAGE
CORRIDOR
CLASS
ROOM
LOBBY
VENDING
MECHANICAL
CORRIDOR
STAIR
VEST.
STORAGE
STAIR
ENTRANCE
VEST.
COMM
ROOM
108A
ELEC
DORM
ROOM
CORRIDOR
LOBBY
CORRIDOR
TLT
7568A
TLT
7577A
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
HC
TOILET
STAIR
VEST.
TLT
7583A
TLT
7591A
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
STORAGE
TLT
7572A
TLT
7587A
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
STAIR
TLT
7590A
TLT
7582A
TLT
7586A
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
DORM
ROOM
TLT
7576A
DORM
ROOM
STAIR
VEST.
TLT
7573A
DORM
ROOM
TLT
7580A
MECHANICAL
TLT
7569A
CLASS
ROOM
LOBBY
VENDING
STAIR
ENTRANCE
VEST.
COMM
ROOM
108A
ELEC
LOBBY
HC
TOILET
STAIR
DORM
ROOM
DORM
ROOM
TLT
7577A
DORM
ROOM
DORM
ROOM
AutoCAD SHX Text
STAIR #1
AutoCAD SHX Text
STAIR #3
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
FIRST FLOOR MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text R-5
AutoCAD SHX Text
CHS
AutoCAD SHX Text
HWS
AutoCAD SHX Text 3/4"
AutoCAD SHX Text 1-1/4"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1-1/4"
AutoCAD SHX Text
CHS
AutoCAD SHX Text
HWS
AutoCAD SHX Text 1"
AutoCAD SHX Text 1-1/2"
AutoCAD SHX Text 3/4"
AutoCAD SHX Text 2"
AutoCAD SHX Text 1"
AutoCAD SHX Text
HWS
AutoCAD SHX Text
CHS
AutoCAD SHX Text 1"
AutoCAD SHX Text 3/4"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1-1/2"
AutoCAD SHX Text 1"
AutoCAD SHX Text
HWS
AutoCAD SHX Text
CHS
AutoCAD SHX Text 1"
AutoCAD SHX Text 1-1/2"
AutoCAD SHX Text 1-1/4"
AutoCAD SHX Text 3/4"
AutoCAD SHX Text 1"
AutoCAD SHX Text 3/4"
AutoCAD SHX Text
HWS
AutoCAD SHX Text
CHS
AutoCAD SHX Text
CHS
AutoCAD SHX Text
HWS
AutoCAD SHX Text
HWS
AutoCAD SHX Text
CHS
AutoCAD SHX Text
CHS
AutoCAD SHX Text 1-1/4"
AutoCAD SHX Text 1-1/4"
AutoCAD SHX Text
HWS
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1-1/2"
AutoCAD SHX Text 1-1/2"
AutoCAD SHX Text
2" CHS
AutoCAD SHX Text
1-1/2" HWS
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text M2.4
AutoCAD SHX Text
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text M2.1
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
LARGE SCALE MECHANICAL PLAN - ROOM 108
AutoCAD SHX Text N
AutoCAD SHX Text S18
AutoCAD SHX Text
AutoCAD SHX Text S18
AutoCAD SHX Text
AutoCAD SHX Text S18
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text C8
AutoCAD SHX Text R20
AutoCAD SHX Text R20
AutoCAD SHX Text R20
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text R16
AutoCAD SHX Text R16
AutoCAD SHX Text R16
AutoCAD SHX Text
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text M2.1
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
TYPICAL DORM ROOM PLAN - FIRST FLOOR
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text
FCU
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text
AutoCAD SHX Text C6
AutoCAD SHX Text R20
AutoCAD SHX Text R20
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text E8
AutoCAD SHX Text
AutoCAD SHX Text S12
AutoCAD SHX Text
AutoCAD SHX Text S12
AutoCAD SHX Text
AutoCAD SHX Text NOTES: 1. IF FCU-2 IS USED IN DORM ROOM, PROVIDE S18 GRILLE AT 400 CFM. IF FCU-2 IS USED IN DORM ROOM, PROVIDE S18 GRILLE AT 400 CFM. 2. FCU LOCATION SHOWN IS DIAGRAMMATIC FOR CLARITY. FCU SHALL BE FCU LOCATION SHOWN IS DIAGRAMMATIC FOR CLARITY. FCU SHALL BE INSTALLED ABOVE LAY-IN CEILING IN BULKHEAD IN SAME LOCATION AS PREVIOUS FCU. COORDINATE WITH ARCH. RCP.
AutoCAD SHX Text
BI.1/M2.1
AutoCAD SHX Text
FIRST FLOOR MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text
JKN
AutoCAD SHX Text
WDS
AutoCAD SHX Text
AS NOTED
AutoCAD SHX Text
SCALE: 1/8" = 1'-0"
AutoCAD SHX Text 8'
AutoCAD SHX Text
AutoCAD SHX Text 16'
AutoCAD SHX Text 4'
AutoCAD SHX Text
SCALE: 1/4" = 1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text
AutoCAD SHX Text 8'
AutoCAD SHX Text 2'
AutoCAD SHX Text SHEET NOTES: 1. INSTALL INSULATION ON ALL NEW AND EXISTING CHILLED WATER PIPING. FIELD INSTALL INSULATION ON ALL NEW AND EXISTING CHILLED WATER PIPING. FIELD VERIFY EXISTING PIPE SIZES. INSULATION SHALL BE PER SPECIFICATIONS. 2. REFER TO B / M0.4 FOR FCU PIPING CONNECTION DETAIL. REFER TO B / M0.4 FOR FCU PIPING CONNECTION DETAIL. 3. CONNECT NEW FCU'S TO EXISTING CONDENSATE DRAIN PIPING. CONNECT NEW FCU'S TO EXISTING CONDENSATE DRAIN PIPING. 4. RETURN GRILLES SERVING FAN COIL UNITS SHALL BE INSTALLED IN CEILING RETURN GRILLES SERVING FAN COIL UNITS SHALL BE INSTALLED IN CEILING GRID UNDERNEATH UNITS. NO DUCT CONNECTION SHALL BE EXTENDED FROM GRILLE TO FCU, AND AIR SHALL BE ABLE TO PASS FREELY FROM THE ROOM INTO THE FCU AIR INTAKE.
AutoCAD SHX Text KEYED NOTES INSTALL GRILLE IN WALL 6" BELOW CEILING WITH BLADES ANGLED UPWARD. INSTALL GRILLE IN WALL WITH BLADES ANGLED UPWARD. PROVIDE HVAC EMERGENCY SHUT-OFF SWITCH IN THE LOC FOR THE MASS NOTIFICATION SYSTEM THAT WILL DISABLE THE OPERATION OF OF DOAS-1430 UNTIL MANUALLY RESET. PROVIDE PERMANENT SIGN ON WALL INDICATING HVAC EMERGENCY SHUT-OFF SWITCH. REFER TO ELECTRICAL.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
MAXWELL AIR FORCE BASE
AutoCAD SHX Text
MAXWELL AFB, ALABAMA 36112
AutoCAD SHX Text
MAXWELL AFB, AL
AutoCAD SHX Text
RENOVATION ROTC BLDG 1430
AutoCAD SHX Text Number:
AutoCAD SHX Text Reference
AutoCAD SHX Text Sheet
AutoCAD SHX Text
PNQS 16-5244
AutoCAD SHX Text
5 JANUARY 2018
AutoCAD SHX Text Symbol
AutoCAD SHX Text Description
AutoCAD SHX Text Scale:
AutoCAD SHX Text Date:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text Designed By:
AutoCAD SHX Text
42 CES/CEN
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Drawing Sheet File:
AutoCAD SHX Text Drawing Folder:
AutoCAD SHX Text Date
AutoCAD SHX Text Approved
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text
AutoCAD SHX Text 1:1
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text Revisions
AutoCAD SHX Text 1430-5244
AutoCAD SHX Text
AutoCAD SHX Text
06AUG2018
AutoCAD SHX Text
RJ
AutoCAD SHX Text
06AUG2018 CHANGES
AutoCAD SHX Text R:\Indesign\maxwell\1430\PNQS 16-5245 Renovate 1430 1433 1434\PNQS165244 Renovate ROTC Dorm 1430\8-6-18 DRAWINGS\Mech\M2.1 FIRST FLOOR MECHANICAL PLAN - BLDG 1430.dwg
AutoCAD SHX Text
4/22/2026 9:10:37 AM
MECHANICAL
MECHANICAL
AutoCAD SHX Text 10/10
AutoCAD SHX Text 14/12
AutoCAD SHX Text 18/14
AutoCAD SHX Text 18/14
AutoCAD SHX Text 18/14
AutoCAD SHX Text 18/18
AutoCAD SHX Text 26/20
AutoCAD SHX Text 14/12
AutoCAD SHX Text 10/10
AutoCAD SHX Text 26/20
AutoCAD SHX Text 12/10
AutoCAD SHX Text 16/14
AutoCAD SHX Text
O.A. LOUVER
AutoCAD SHX Text M2.4
AutoCAD SHX Text
AutoCAD SHX Text 1/8" = 1'-0"
AutoCAD SHX Text
ATTIC MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text M2.4
AutoCAD SHX Text M2.1
AutoCAD SHX Text
AutoCAD SHX Text M2.4
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
LARGE SCALE MECHANICAL ROOM PLAN
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text
PCW
AutoCAD SHX Text
AutoCAD SHX Text
VFD
AutoCAD SHX Text 18/14
AutoCAD SHX Text 18/18
AutoCAD SHX Text 26/20
AutoCAD SHX Text 16/14
AutoCAD SHX Text M2.4
AutoCAD SHX Text
AutoCAD SHX Text M2.4
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
LARGE SCALE MECH. ATTIC PLAN
AutoCAD SHX Text N
AutoCAD SHX Text
AutoCAD SHX Text
EF
AutoCAD SHX Text
AutoCAD SHX Text
DOAS
AutoCAD SHX Text
BI.1/M2.4
AutoCAD SHX Text
ATTIC MECHANICAL PLAN - BLDG 1430
AutoCAD SHX Text
JKN
AutoCAD SHX Text
WDS
AutoCAD SHX Text
AS NOTED
AutoCAD SHX Text
SCALE: 1/8" = 1'-0"
AutoCAD SHX Text 8'
AutoCAD SHX Text
AutoCAD SHX Text 16'
AutoCAD SHX Text 4'
AutoCAD SHX Text
SCALE: 1/4" = 1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text
AutoCAD SHX Text 8'
AutoCAD SHX Text 2'
AutoCAD SHX Text SHEET NOTES 1. MODIFY EX. ATTIC DUCTWORK AS REQUIRED TO CONNECT TO MODIFY EX. ATTIC DUCTWORK AS REQUIRED TO CONNECT TO DOAS AHU CONNECTIONS. FIELD VERIFY EX. CONDITIONS. 2. INSTALL AHU THROUGH ATTIC DORMER OPENING. REFER TO INSTALL AHU THROUGH ATTIC DORMER OPENING. REFER TO M0.5. 3. REFER TO C/M0.4 FOR DOAS PIPING CONNECTION DETAIL. REFER TO C/M0.4 FOR DOAS PIPING CONNECTION DETAIL. 4. CONNECT DOAS CONDENSATE DRAIN TO EXISTING DRAIN PIPING.CONNECT DOAS CONDENSATE DRAIN TO EXISTING DRAIN PIPING.
AutoCAD SHX Text
MAXWELL AIR FORCE BASE
AutoCAD SHX Text
MAXWELL AFB, ALABAMA 36112
AutoCAD SHX Text
MAXWELL AFB, AL
AutoCAD SHX Text
RENOVATION ROTC BLDG 1430
AutoCAD SHX Text Number:
AutoCAD SHX Text Reference
AutoCAD SHX Text Sheet
AutoCAD SHX Text
PNQS 16-5244
AutoCAD SHX Text
5 JANUARY 2018
AutoCAD SHX Text Symbol
AutoCAD SHX Text Description
AutoCAD SHX Text Scale:
AutoCAD SHX Text Date:
AutoCAD SHX Text Checked By:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text Designed By:
AutoCAD SHX Text
42 CES/CEN
AutoCAD SHX Text Reviewed By:
AutoCAD SHX Text Drawing Sheet File:
AutoCAD SHX Text Drawing Folder:
AutoCAD SHX Text Date
AutoCAD SHX Text Approved
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text
AutoCAD SHX Text 1:1
AutoCAD SHX Text B
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text G
AutoCAD SHX Text F
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text Revisions
AutoCAD SHX Text 1430-5244
AutoCAD SHX Text
AutoCAD SHX Text
06AUG2018
AutoCAD SHX Text
RJ
AutoCAD SHX Text
06AUG2018 CHANGES
AutoCAD SHX Text R:\Indesign\maxwell\1430\PNQS 16-5245 Renovate 1430 1433 1434\PNQS165244 Renovate ROTC Dorm 1430\8-6-18 DRAWINGS\Mech\M2.4 ATTIC MECHANICAL PLAN - BLDG 1430.dwg
AutoCAD SHX Text
4/22/2026 9:13:01 AM
GENERAL NOTES:
SECOND FLOOR HVAC PLAN - DUCTWORK
FIRST FLOOR HVAC PLAN - DUCTWORK
AutoCAD SHX Text 1-D
AutoCAD SHX Text 1-E
AutoCAD SHX Text 1-B
AutoCAD SHX Text 1-A
AutoCAD SHX Text 1-E
AutoCAD SHX Text 1-E
AutoCAD SHX Text 1-B
AutoCAD SHX Text 1-B
AutoCAD SHX Text 1-B
AutoCAD SHX Text 1-C
AutoCAD SHX Text 2-A
AutoCAD SHX Text 2-E
AutoCAD SHX Text 2-E
AutoCAD SHX Text 2-E
AutoCAD SHX Text 2-E
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-F
AutoCAD SHX Text 2-E
AutoCAD SHX Text 2-B
AutoCAD SHX Text 2-C
AutoCAD SHX Text 1-K
AutoCAD SHX Text 1-H
AutoCAD SHX Text 1-L
AutoCAD SHX Text 1-L
AutoCAD SHX Text 1-L
AutoCAD SHX Text 1-L
AutoCAD SHX Text 1-L
AutoCAD SHX Text 1-I
AutoCAD SHX Text 1-I
AutoCAD SHX Text 1-I
AutoCAD SHX Text 1-I
AutoCAD SHX Text 1-I
AutoCAD SHX Text 2-J
AutoCAD SHX Text 2-K
AutoCAD SHX Text 2-J
AutoCAD SHX Text 2-J
AutoCAD SHX Text 2-J
AutoCAD SHX Text 2-J
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-G
AutoCAD SHX Text 2-H
AutoCAD SHX Text 1-J
AutoCAD SHX Text 1-J
AutoCAD SHX Text
SEE ENLARGED FLOOR
AutoCAD SHX Text
PLAN SHEET M3.1 FOR
AutoCAD SHX Text
WORK IN THIS AREA
AutoCAD SHX Text 1-E
AutoCAD SHX Text 1-E
AutoCAD SHX Text
UC
AutoCAD SHX Text
UC
AutoCAD SHX Text
UC
AutoCAD SHX Text
UC
AutoCAD SHX Text
UC
AutoCAD SHX Text
UC
A…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .