Attachment 4 - Sample Review Form - Flat Bronze Markers.pdf

This is a Sample Review Form for Flat Bronze Markers used in federal contracting for cemetery memorial products.

The form evaluates flat bronze markers against detailed specifications for size (12" x 24"), finish, texture, and lettering requirements. Key specifications include a pigmented finish in Munsell Color Standard notation 0.5Y2249/1.0, bare bronze field texture, L2 letter height of 1" and L4 letter height of 3/4", and a reverse side with sand texture-stamped 1/2" letters reading "Property of US Government." The markers must be equipped with four 5 or 6-inch 3/8-16 NC-2 threaded brass rods with nuts and washers, with bosses drilled to a depth not exceeding 7/16 of an inch containing no fewer than three complete threads. Washers must be 2" x 2", 18-gauge reinforced brass with centered 3/8" holes. Additional requirements include workmanship free of bends, warps, wrinkles, and scratches with deflection less than 1/16 inch; a random woven loop border (excluded for T1 samples); uniform glossy coating free of bare spots, blistering, and peeling; and hole placement 9" from center and 3-1/2" from top/bottom.

The form provides administrative fields for documenting the offeror name, cemetery, solicitation number, date received, shipping information, and sample type (B1, B6, T1, or T6). Each specification criterion includes checkbox options for accepted or unaccepted determinations with space for comments. The form references drawing numbers A-B1 (dated 2019-09-23) and A-T1 (dated 2007-03-01) and includes sections for sample recommendation (approved/disapproved), reviewer signature, and concurrence signature.