Attachment 4 - Sample Review Form - Flat Bronze Markers - Rev.pdf

This is a Sample Review Form for Flat Bronze Markers used in federal cemetery procurement. The form documents the inspection and acceptance criteria for bronze grave markers measuring 12" x 24" that will be placed in cemeteries.

The form establishes detailed specifications for marker acceptance across multiple categories: size, pigmented finish to Munsell Color Standard notation 0.5Y2.49/1.0, deep embossed leather-looking cast texture on the field side, letter heights of 1" for L2 and 3/4" for L4 designations, and a reverse side featuring sand texture with "PROPERTY OF THE US GOVERNMENT" permanently cast in ½-inch letters. Hardware requirements include four 5/8"-16 NC-2 threaded brass rods with nuts and washers, with bosses drilled to no more than 7/16 inch depth containing minimum three complete threads, and 2" x 2" 18-gauge reinforced brass washers with 3/8" centered holes. Additional acceptance criteria cover workmanship standards requiring freedom from bends, warps, wrinkles, and scratches with deflection not exceeding 1/16 inch; random woven loop border (excluded for T1 sample type); uniform glossy coating free of bare spots, blistering, and peeling; and hole placement 9" from center and 3-1/2" from top and bottom. The form provides checkboxes for accepted/unaccepted determinations for each criterion and references technical drawings A-B1, A-B6 (dated 2019-09-23) and A-T1, A-T6 (dated 2007-03-01), with final sample recommendation and concurrence sign-off requirements.