Attachment 3 - MAHG 23-00002 Fence Drawing.pdf
PDF 168 KB Posted
- Attached to
- Land Mobile Radio (LMR) Repeater Site
- Solicitation number
- FA301024R0005
About this file
This document appears to be a drawing for the Impasse II R fence system, which is relevant to the federal contract opportunity for the Land Mobile Radio (LMR) Repeater Site project at Keesler AFB.
The drawing provides details on the specifications and design of the Impasse II R fence system, including the dimensions, materials, and construction of the posts, rails, and pales. It specifies that the fence system features a corrugated pale design, I-beam posts, and security fasteners to prevent tampering. The drawing also notes that additional fence heights are available upon request, and provides recommendations for I-beam sizes based on the fence height.
The related federal contract opportunity is a solicitation for the Radio Frequency (RF) Site Relocation project at Keesler AFB, with an estimated value between $1,000,000 and $5,000,000. The solicitation is being issued as an Other than Full and Open acquisition to a Motorola certified vendor. An organized site visit is scheduled for June 12, 2024, and the solicitation directs offerors to specific proposal preparation and evaluation information in Sections L and M.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
16 1 2 "
419.1028 1 2 "
723.90
Varies With
Height
3 1 4 "
82.55
Typ.
Height 10'[3048.0]
2" 50.80 Nom.36.00
914.40 Min. Post Setting
Impasse II R
I-Beam Post
2 3/4" [69.9]
Pale (14 Ga.)
8 3 4 "
2 1 8 "
53.59
2 1 8 "
53.34
Impasse II R Rail (12 Ga.)
Base Steel Material Uniform Zinc Coating (Hot DIp Galvanized)
Phosphate & Conversion Coating Epoxy Base Coat
" No-Mar" Polyester Powder Finish Coat
Note:
1.) Additional heights available on request.
2.) Third rail required.
3.)3"[76.2] x 12 Ga. I-Beam recommended for 7' [2133.6] & 8' [2438.4] heights.
4"[101.6] x 11 Ga. I-Beam recommended for 9' [2743.2] & 10' [3048.0] heights.
Values shown are nominal and not to be used for installation purposes. See product specification for insallation requirements.
Impasse II R POST Specially formed I-Beam, pre-punched for multiple rail options
Impasse II R Pale Specially formed high strength corrugated shape;
resists prying or bending; bolt holes recessed to prevent chiseling of bolt head.
Security Fastener Prevents Tampering or removal by common tools
Impasse II R Rail Specially formed high strength architectural shape; lower lip contoured to carry - Steel Cable and/or Sensor Cables for security.
REV DESCRIPTION DATE ENGINEER
D
B
A A
B
C
D
8 7 6 5 4 3 2 1
Ameristar Perimeter Security USA Inc Tulsa
DRAWN BY
trasmi
V 4_ /0 2/
SURFACE/FINISH
THIRD ANGLE
PROJECTION
C
HEAT TREATMENT
DRAWING COMPLIES WITH
ASME Y14.5M - 1994
NOTICE TO PERSONS RECEIVING THIS DRAWING
AND/OR TECHNICAL INFORMATION
Ameristar Perimeter Security USA Inc claims proprietry rights to the material disclosed hereon.
This drawing and/or technical information is issued inconfidence for engineering information only and may not be reproduced or used to manufacture anything shown or referred to hereon without direct written permission from Ameristar Perimeter Security USA Inc to the user.
This drawing an /or technical information is the property of Ameristar Perimeter Security USA Inc and is loaned for mutual assistance to be returned when its purpose has been served.
LEGACY ID SHEET 1 OF 1
IMPASSE II GAUNTLET 2 OR 3 RAIL
CONFIGURATION Un-Exploded458 7 6
DRAWING NUMBER (ALT ID)
3GISO
VOLUME
15519.63 in³
SURFACE AREA
29155.11 in²
SIZE
B
DATE CREATED
1/2/2019
DESIGNED BY
trasmi
SCALE
1:32
MASS
814.80 lb
MATERIAL
SEE BOM
.06 .03 .02 0.5° 1/8
X.X
X.XX
X.XXX
ANGLES
FRACTIONS
SURFACE FINISH
UNLESS OTHERWISE
SPECIFIED TOLERANCES
INCH
MM
DOCUMENT ID
8' [2438.40] O.C. Nom.
Impasse II R Rail
(SEE CROSS SECTION BELOW)
File details come from the government source that posted it. Updated .