ATTACHMENT 14 Yarway BlowOff Valve.pdf

General Description Basic requirements for the design and use of blow-off valves are established by the ASME Power Boiler Code, Section l.

The general form of a valve, the materials of its construction, allowable boiler pressures, and the installation of the valve are all determined by the code.

Yarway blow-off valves are designed in conformance with all code requirements (ASME Section l, ANSI B31.1, ANSI B16.34).

Because the primary purpose of a blow-off valve is removal of dirt, sediment and scale, the boiler code requires that valves which have dams or pockets in which sediment can accumulate cannot be used in blow-off service. This means that ordinary globe valves cannot be used as blow-off valves.

Yarway valves are especially designed for the punishment of blow-off service in boiler systems with pressures of 3,193 psi.

The rugged construction of these valves can successfully withstand the combination of problems inherent in the service – a service in which high pressures result in high velocities which can cause wire drawing and cavitation of metal surfaces.

The valves must also withstand the corrosive environment created by acid cleaning of boilers, and the potential wear problems caused by precipitated solids.

The valves are also helpful in maintaining boiler level surge within desirable limits during quick startup of high pressure systems.

Two broad categories of Yarway blow-off valves are available; those that operate on a sliding principle and those that operate on a seat-and-disc principle.

Yarway Blow-off Valve

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404-US-0908

Flow Control Yarway is either a trademark or registered trademark of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.

Features and Benefits Seatless Valves

No seat

• will not score with dirt

• will not plug with dirt

• will not leak

“Live-loaded” packing

• will not leak after packing water

Slow opening

• will not rapidly drain boiler drum

Features and Benefits Unit Tandem Valves

A combination of hardseat-hardseat or hardseat-seatless valves in a single body

• eliminates pipe joints

• reduces potential leaks

• fits into a confined space

Hardseat Valves Stellite valve and seat

• resists wear

• provides long service life

Designed for blow-off service in boiler systems with pressures of 3,206 psig.

Yarway Blow-off Valve

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Type B Seatless Blow-off Valve

Open Yoke shows position of plunger in body.

Ball Bearing Yoke for easy operation of handwheel.

Long Stroke Length with threaded stem helps prevent water hammer, which occurs when valve is opened or closed too quickly.

Shoulder on Plunger transmits force, in the closed position, through glands to packing rings.

Nitralloy Plunger tube resists erosion, high temperatures and sudden shocks. Seatless, sliding design provides “polishing” action that lengthens life of packing rings.

Dual Guide Lugs provide proper alignment.

Compression Springs maintain continuous pressure on packing rings to keep valve tight regardless of plunger position.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Flange and drilling data common to all Yarway valve designs are shown below. All dimensions are consistent with ANSI standards and supplied as listed unless otherwise specified.

Blow-off Valve Flange Data – Flange Dimensions

Diameter Thickness Diameter of Raised Face Size Class Class Class Class Class Class Class Class Class (in.) 250-600 1500 2500 250-300 400-600 1500 2500 250 300-2500 1 47/8 57/8 61/4 11/16 15/16 2 13/8 15/8 211/16 2 11/2 61/8 7 8 13/16 11/8 11/2 2 39/16 27/8 2 61/2 81/2 91/4 7/8 11/4 13/4 21/4 43/16 35/8 21/2 71/2 95/8 101/2 1 13/8 17/8 21/2 415/16 41/8

Drilling Data

Size No. of Diameter Bolt Circle Diameter (in.) Holes3 Class 250-600 Class 1500 Class 2500 Class 250-600 Class 1500 Class 2500 1 4 3/4 1 1 31/2 4 41/4 11/2 4 7/8 11/8 11/4 41/2 43/8 53/4 2 8 3/4 1 11/8 5 61/2 63/4 21/2 8 7/8 11/8 11/4 57/8 71/2 73/4

Notes:

1. Includes 1/16" raised face 250-400 psi valves, 1/4" raised face 600-2500 psi.

2. 600 psi only, no 1" 400 psi valve available.

3. Bolt holes straddle center lines.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

The seatless blow-off valve is a sliding plunger type, opened and closed by means of a handwheel and non-rising stem, and sealed against leakage by packing rings above and below the ports.

This valve is provided with heavy coil compression springs under the yoke nuts. Designed to help prevent leaking when the valve is open, yoke nuts are screwed down evenly and tightly placing compression on the springs and the packing rings.

Ample flow area is provided in the hollow plunger; absence of projections or pockets prevents accumulation of scale and sediment that can impede flow and shorten the life of the valve.

Annular space in the body permits pressure to surround the plunger, making the valve a fully balanced unit easy to operate at high pressures.

For complete protection of the packing, the valve has a long-stroke plunger so that the packing is never exposed to the mainstream flow. The gland and plunger have double inlet ports to balance flow pressures.

This valve is available in angle or straightway styles, cast iron or steel construction, and flanged ends.

Operation When the valve is open (plunger raised), discharge occurs through double ports in the lower gland and plunger. The slotted plunger head slides on guides in the valve yoke, preventing rotation of the plunger.

A stop screw keeps the lower gland in alignment. The yoke permits visual indication of the position of the plunger within the valve body.

Upon closing, the shoulder on the plunger exerts a thrust force compressing the packing rings above and below the port in the body. A final hard turn of the handwheel gives additional compression of the packing around the plunger, ensuring drop tight shutoff.

End Connections Flange dimensions per ANSI B 16.5

Actuation Manual handwheel only.

Standard Options Acid wash trim:

1. Standard upper gland is replaced with nickel plated steel upper gland.

2. Standard lower gland is replaced with Ni-resist lower gland.

3. Standard plunger is replaced with nickel plated nitralloy plunger.

Stop screw with lubrication fitting.

Caution plate for tandem sets.

Special flanges only when dimensions are within standard flange maximum metal conditions.

How to Specify To specify seatless valves for nominal pressures to 600 psi, use figure number shown. Describe as long stroke, balanced sliding plunger type seatless valve.

How to Order Order by stating:

a. Size b.Figure number

c. Basic pressure rating d.Connections – flanged

e. Angle or straightway style

Seatless Valves for Pressures to 935 psi – Class 250 to 600

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Materials of Construction (pressure containing envelope)

Valve 1 2 3 and 4 5 and 6 7 Type Class Body Yoke Packing Rings Glands Plunger

Cast Iron Cast Iron Graphite, Hard Brass B 250 ASTM A126 ASTM A395 SS Filled PTFE, B135 Nitralloy

Class B 60-40-18 Brass or SS Alloy 3 Grade H Support Ring1

Graphite, Cast Steel Cast Steel

SS Filled PTFE, Hard Brass

Nitralloy

B 300 ASME SA216 ASME SA216

Brass or SS B135

Grade H Grade WCB Grade WCB

Support Ring1 Alloy 3

Cast Steel Cast Steel Graphite, Low NitralloyC 600 ASME SA216 ASME SA216 SS Filled PTFE, Carbon Steel Grade HGrade WCB Grade WCB SS Support Ring

Note: 1. 316 SS for acid wash trim.

Seatless Valves for Pressures to 935 psi – Class 250 to 600

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Dimensions and Weights

Press. Blow-off Figure Number Size Dimensions Cv Wt.

Rating (max.psi) Angle Straight- (in.) A B C D E F L M P R S (lb.)

Class way 250 200 3482-R 3484-R 1 4 6 101/4 47/8 11/16 211/16 181/4 171/4 1 1413/16 83/8 24 30 250 200 3482-R 3484-R 11/2 41/2 41/2 11 61/8 13/16 39/16 181/4 181/2 11/2 16 83/8 30 38 250 200 3482-R 3484-R 2 5 5 12 61/2 7/8 43/16 193/8 197/4 2 17 93/8 58 55 250 200 3482-R 3484-R 21/2 53/4 53/4 131/2 71/2 1 415/16 217/8 221/8 21/2 191/2 11 73 85 300 490 3486-R 3488-R 1 315/16 55/8 97/8 47/8 11/16 2 173/4 167/8 1 1413/16 83/8 27 38 300 490 3486-R 3488-R 11/2 47/16 49/16 11 61/8 13/16 27/8 181/16 181/2 11/2 157/8 83/8 30 45 300 490 3486-R 3488-R 2 5 51/4 12 61/2 7/8 35/8 199/16 1915/16 2 173/8 93/8 58 65 300 490 3486-R 3488-R 21/2 53/4 6 131/2 71/2 1 41/8 221/8 221/8 21/2 191/2 11 79 90 600 935 3910-R 3912-R 11/2 41/2 81/4 13 61/8 11/8 27/8 227/8 221/2 11/2 195/8 83/8 30 53 600 935 3910-R 3912-R 2 51/4 91/4 15 61/2 11/4 35/8 251/4 225/16 2 225/16 93/8 59 75 600 935 3910-R 3912-R 21/2 53/4 91/2 17 71/2 13/8 41/8 273/4 281/2 21/2 253/8 11 79 105

Seatless Valves for Pressures to 935 psi – Class 250 to 600

F

F

E

1/4

D

A

P

B

S Dia.

L Approx.

C

45°

M Approx.

E 1/16

1/4

S Dia.

R Approx.

C

E

S

R Approx.

D A

P

B

S

L Approx.

Figure 3482-R and 3486-R

Type B

Figure 3484-R and 3488-R

Type B

Figure 3912-R

Type C

Figure 3910-R

Type C

E

1/16

D

45°

DP F

FP

M Approx.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

The hardseat valve has a seat and disc design with flow entering under the seat.

It is opened and closed by means of a handwheel and threaded rising stem.

The stuffing box bushing and threaded yoke bushing provide a simple, sturdy guide for the stem. This valve has been designed with thick Stellite facings on the disc and seat to provide the hard wearing, anti-galling surfaces characteristic of Stellite.

Operation Hardseat valves are available in angle or straightway styles, socketweld or flanged end connections with manual or electric motor actuation.

Usual installation of this valve allows the flow to enter below the seat. As the valve is opened, the lip on the end of the disc restricts the flow until the beveled edge or seating surface of the disc is well away from the seat.

This minimizes wiredrawing and protects the sealing faces. The valve should be opened rapidly and fully to help increase the life of the internal parts.

Tandem Usage Any two Yarway hardseat valves may be used in tandem for pressures to 2455 psi. The valve nearest the boiler is used as the blowing valve (opened last and closed first) and the valve farthest from the boiler is the sealing valve (opened first and closed last).

For pressures to 935 psi, hardseat valves may be used in tandem with Yarway Type C seatless valves.

How to Specify For single valves, describe as seat and disc type hardseat valve. Use size and figure number shown.

For tandem valves (pressures to 2455 psi), describe as: blow-off valves shall consist of one angle and one straightway (or two angle or two straightway) seat and disc type hardseat valves, installed in tandem arrangement, to conform with requirements of ASME Boiler Code and suitable for basic pressure rating of _____ psi.

How to Order Order by stating:

a. Size b.Figure number

c. Basic pressure rating d.Connections – flanged and socketweld for 600 class valves;

socketweld for 1500 class valves. As an option, buttweld ends are available for 2" and 21/2" 1500 class valves only.

e. Angle or straightway style

Hardseat Valves for Pressures to 2455 psi – Class 600 and 1500

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Materials of Construction

Figures 6909, 6911, 6912, 6929-C, 6931-C Figures 6929, 6931

Item Part Material Specifications Material Specifications 1 Body Steel ASME SA-216 WCB Steel ASME SA-1051

2 Nozzle with Integral Steel with Integral Steel with Integral Seat Stellited Face ASME SA-216 WCB Stellited Face ASME SA-1051

3 Gland Steel ASME SA-216 WCB2 Steel ASME SA-1051

4 Split Gland Bushing Naval Brass2 – Stainless Steel AISI 416

5 Disc Steel with Stellited ASME SA-182 Steel with Stellited ASME SA-182 Seating Face Grade F11 Seating Face Grade F11

6 Disc Nut Stainless Steel AISI 4102 Stainless Steel AISI 410 2

7 Stuffing Box Bushing Nickel Alloy Ni-Resist No. 1 Nickel Alloy Ni-Resist No. 1 8 Yoke Bushing Naval Brass Silicon Brass B-371 Alloy 694 9 Stem Stainless Steel ASTM A-582 Type 416 Stainless Steel ASTM A-582 Type 416

10 Handwheel Cast Iron ASTM A-47 Gr. 32510 Cast Iron ASTM A-47 Gr. 32510 12 Hex Nut Steel ASME SA-194 Gr. 2H Steel ASME SA-194 Gr. 2H 13 Hex Nut Steel ASME SA-194 Gr. 2H Steel ASME SA-194 Gr. 2H 14 Bolt Steel ASME SA-193 Gr. B7 Steel ASME SA-193 Gr. B7

Stainless Steel Stainless Steel 15 Disc Insert (heat treated) AISI 410 (heat treated) AISI 410

16 Packing Flexible Graphite – Flexible Graphite – 17 Sleeve Insert3 Steel – Steel –

Hardseat Valves for Pressures to 2455 psi – Class 600 and 1500

Notes:

1. 11/2" 6929 and 2931 only. 2" and 21/2" 6929-C and 6931-C body and nozzle are cast ASME SA216 WCB (“C” in Figure Number designates cast material);

gland ASME SA217 WCB.

2. 11/2" valve gland material is ASME SA181 Gr. II; split gland bushing and disc nut material is AISI 416.

3. 2" and 21/2" valve only.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Dimensions and Weights

Press. Blow-off Figure Number Size Dimensions Cv Wt.

Class (max.psi) Angle Straight- (in.) A B C D E F H K L M P T (lb.)

Rating way

600 935 6909-C 6911-C 11/2 31/4 33/8 81/4 3 1.92 1/2 111/2 127/8 161/8 111/16 11/2 123/8 41 25 600 935 6909-C 6911-C 2 35/8 33/4 9 31/2 2.41 5/8 111/2 143/4 183/8 133/8 2 15 96 44 600 935 6909-C 6911-C 21/2 4 43/8 101/2 4 2.91 5/8 111/2 163/8 201/2 151/2 21/2 173/8 125 75 600 935 6910-C 6912-C 11/2 43/4 41/2 12 61/8 11/8 27/8 111/2 127/8 171/4 111/16 11/2 123/8 41 36 600 935 6910-C 6912-C 2 53/4 5 14 61/2 11/4 35/8 111/2 143/4 195/8 133/8 2 15 96 55 600 935 6910-C 6912-C 21/2 61/2 57/8 16 71/2 13/8 41/8 111/2 163/8 213/4 151/2 21/2 173/8 125 85

1500 2455 6929 6931 11/2 59/16 37/16 9 25/8 1.92 1/2 111/2 16 191/2 16 13/8 17 41 33 1500 2455 6929-C 6931-C 2 53/8 37/8 91/4 41/8 2.41 5/8 131/2 1711/16 217/16 1711/16 115/16 181/8 95 60 1500 2455 6929-C 6931-C 21/2 53/8 37/8 91/4 41/8 2.91 5/8 131/2 1711/16 217/16 1711/16 21/8 181/8 95 60

Hardseat Valves for Pressures to 2455 psi – Class 600 and 1500

Figure 6909-C Figure 6910-C Figure 6911-C

Figure 6912-C Figure 6929 and 6929-C Figure 6931 and 6931-C

M - Open Approx.

P E D

F

A

A

H Dia.

M - Open Approx.

A

A

H Dia.

K - Open Approx.

K - Open

P E DP F D

Direction of flow

E

1/4

F

T - O pen

Approx

B

C

L - Open Approx.

H Dia.

45°

K - Open Approx.

P F D

E

T - O pen

Approx

B

C

L - Open Approx.

H Dia.

45°

1/4

B

P E D

T - O pen

A

M - Open

H Dia.

45°

F B

P E D

T - O pen

C

L - Open

H Dia.

45°

F

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

The Yarway unit tandem valve features a one-piece steel block which serves as a common body for both blowing and sealing valves. This construction eliminates interconnecting welds, or bolts and gaskets where flanged valves are required, and makes the unit tandem a compact design.

For valves with basic pressure rating to 600 psi (medium pressure unit tandem), the inlet valve is a hardseat type and the discharge valve is of the seatless type. For basic pressure ratings above 600 to 2500 psi, both inlet and discharge valves are hardseat type.

All features of the Yarway single valves are contained in the unit tandem design with the additional advantage of a one-piece, heavy duty construction.

These valves are available in right-hand or left-hand body assemblies, carbon steel (ASME SA-105), socketweld or flanged end connections. All hardseat unit tandem valves include acid wash trim. In hardseat seatless unit tandem valves, acid wash trim is optional.

The hardseat valve of any unit tandem can be equipped with an electric motor actuator (230/460-volt, three-phase, 60-Hertz).

Special voltage and standard actuator accessories are available.

How to Specify To specify unit tandem valves use size and figure numbers shown. Describe as: valve assembly shall consist of one seat and disc type hardseat valve and one balanced, sliding plunger type seatless valve (or two seat and disc hardseat valves) assembled in tandem arrangement as part of one common body conforming with requirements of ASME Boiler Code and suitable for pressure rating of _____ psi.

When motor actuation is desired, describe as: …with electric motor actuation (230/460-volt, three-phase, 60-Hertz).

How to Order Order by stating:

a. Size b.Figure number

c. Basic pressure rating d.Connectors - flanged or socketwelding ends (if buttwelding ends are required, include description of profile)

e. Hand: right-hand or left-hand

f. Trim: standard or acid wash

How to “Hand” Unit Tandem Valves Because the construction and installation of a unit tandem valve is inherently “off-center” with respect to the centerline of the boiler outlet, opening and closing of the valve can become difficult if operating space is inadequate on the side of the blowing valve.

Therefore, the practice of “handing” a valve has become part of its specification.

This is essentially a statement of planned position for the valve, to the left-hand or right-hand of the centerline of the boiler outlet, by specifying the location of the sealing valve when facing the handwheel of the blowing valve (next to boiler). The drawing shown below should help you to “hand” or orient your valves correctly.

a

Specify location (right or left) of sealing valve when facing handwheel of next-to boiler hardseat blowing valve.

Unit Tandem Valves for Pressures to 3206 psi – Class 300 to 2500

11/2" 6978-6978 left hand Sealing Valve

Blowing Valve

From Boiler

Sealing Valve

Blowdown Valve Handwheel

Right Hand Left Hand

Blowdown Valve

Handwheel

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Materials of Construction (see pages 13 - 16 for Drawing References)

Item Part Material Specification 1 Body Carbon Steel - 0.35% Max. C (Stellited Seat) ASME SA-105

13 Spring Steel SAE 6150 14 Stud Steel ASME SA 193 Gr. B7 15 Extension Lever Malleable Iron – 16 Nozzle Forged Steel - 0.35% Max. C ASME SA-105 17 Yoke Steel ASME SA-1051 19 Gland Steel ASTM A-181 Grade II1 20 Disc Steel (Stellited) ASME SA-182 Grade F11 21 Split Gland Bushing Stainless Steel Type 4162 22 Disc Nut Stainless Steel Type 410 23 Stuffing Box Bushing Nickel Alloy Ni-Resist No. 1 24 Yoke Bushing Bronze ASTM B-371 Alloy 6942 25 Stem Stainless Steel ASTM A-582 Type 416 26 Bolt Stainless Steel ASTM A-193-B63 27 Handwheel Cast Iron ASTM A-48 28 Packing Flexible Graphite (Carbon Braid End Rings) – 31 Disc Insert Stainless Steel (Heat Treated) AISI 410

Notes:

1. 600 psi and lower rated valve; ASME SA-216 Gr. WCB.

2. 600 psi and lower rated valve; Naval Brass.

3. 600 psi and lower rated valve; ASME SA-193 B7.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Dimensions and Weights (see pages 13 - 16 for Drawing References)

Press. Blow-off Figure Size Dimensions Stem Cv Wt.

Rating (max.psi) No. (in.) A B D E G H K L M P Rise (lb.)

Class (closed) (closed)

300 490 3947-39271 1 513/16 51/2 23/8 1.33 83/8 1/2 105/8 167/16 83/8 31/32 15/16 17 50 300 490 3947-39271 11/2 513/16 51/2 31/8 1.92 83/8 1/2 105/8 167/16 83/8 11/2 15/16 22 65 300 490 3947-39271 2 63/16 515/16 33/8 2.41 93/8 5/8 125/16 181/2 93/8 115/16 13/16 38 108 300 490 3947-39271 21/2 71/16 71/16 4 2.91 11 5/8 1411/16 213/4 11 21/2 11/4 47 150 300 490 3948-39281 1 43/4 71/8 47/8 11/16 83/8 – 105/8 153/8 83/8 1 15/16 17 55 300 490 3948-39281 11/2 51/2 53/16 61/8 13/16 83/8 – 105/8 161/8 83/8 11/2 15/16 25 70 300 490 3948-39281 2 513/16 59/16 61/2 7/8 93/8 – 125/16 181/8 93/8 2 13/16 39 113 300 490 3948-39281 21/2 611/16 611/16 71/2 1 11 – 1411/16 213/8 11 21/2 11/4 47 163 600 935 6977-69531 1 47/8 51/2 2 1.33 83/4 1/2 93/8 141/4 6 1 15/16 9 50 600 935 6977-69531 11/2 513/16 71/8 3 1.92 71/4 1/2 105/8 167/16 111/2 11/2 15/16 17 82 600 935 6977-69531 2 63/16 87/8 33/8 2.41 81/2 5/8 125/16 181/2 111/2 2 13/16 39 125 600 935 6977-69531 21/2 71/16 107/8 4 2.91 95/16 5/8 1411/16 213/4 111/2 21/2 11/4 75 174 600 935 6978-69541 1 47/8 51/2 47/8 11/16 83/4 – 93/8 141/4 6 1 15/16 9 50 600 935 6978-69541 11/2 513/16 71/8 61/8 13/16 71/4 – 105/8 167/16 111/2 11/2 15/16 17 82 600 935 6978-69541 2 63/16 87/8 61/2 7/8 81/2 – 125/16 181/2 111/2 2 13/16 39 125 600 935 6978-69541 21/2 71/16 107/8 71/2 1 95/16 – 1411/16 213/4 111/2 21/2 11/4 75 174 600 935 6977-69772 1 47/8 51/2 2 1.33 – 1/2 93/8 141/4 6 1 15/16 9 50 600 935 6977-69772 11/2 513/16 71/8 3 1.92 – 1/2 105/8 167/16 111/2 11/2 15/16 29 82 600 935 6977-69772 2 63/16 87/8 33/8 2.41 – 5/8 125/16 181/2 111/2 2 13/16 41 125 600 935 6977-69772 21/2 71/16 107/8 4 2.91 – 5/8 1411/16 213/4 111/2 21/2 11/4 48 174 600 935 6978-69782 1 47/8 – 47/8 11/16 – – 93/8 141/4 6 1 15/16 9 75 600 935 6978-69782 11/2 513/16 – 61/8 13/16 – – 105/8 167/16 111/2 11/2 15/16 29 112 600 935 6978-69782 2 63/16 – 61/2 7/8 – – 125/16 181/2 111/2 2 13/16 41 230 600 935 6978-69782 21/2 71/16 – 71/2 1 – – 1411/16 213/4 111/2 21/2 11/4 48 240

1500 2455 6982-69822 1 55/16 – 57/8 13/8 – – 135/8 1815/16 6 7/8 1 9 80 1500 2455 6982-69822 11/2 57/8 – 7 11/2 – – 161/2 223/8 11 13/8 11/16 25 130 1500 2455 6982-69822 2 73/8 – 81/2 13/4 – – 209/16 27 15/16 141/2 17/8 11/4 50 270 1500 2455 6982-69822 21/2 8 – 95/8 17/8 – – 209/16 289/16 141/2 17/8 11/4 50 300 1500 2455 6981-69812 1 4 – 2 1.33 – 1/2 135/8 175/8 6 7/8 1 9 75 1500 2455 6981-69812 11/2 5 – 27/8 1.92 – 1/2 16 1/2 21 1/2 11 13/8 11/16 26 115 1500 2455 6981-69812 2 6 – 31/2 2.41 – 5/8 209/16 269/16 141/2 17/8 11/4 49 238 1500 2455 6981-69812 21/2 6 – 45/16 2.91 – 5/8 209/16 269/16 141/2 17/8 11/4 49 238 2500 3206 6983-69832 1 4 – 21/4 1.33 – 1/2 135/8 175/8 6 7/8 1 9 75 2500 3206 6983-69832 11/2 5 – 33/16 1.92 – 1/2 16 1/2 21 1/2 11 13/8 11/16 26 115 2500 3206 6983-69832 2 6 – 37/8 2.41 – 5/8 209/16 269/16 141/2 17/8 11/4 49 238 2500 3206 6983-69832 21/2 6 – 41/2 2.91 – 5/8 209/16 269/16 141/2 17/8 11/4 49 238

Notes:

1. Hardseat-Seatless

2. Hardseat-Hardseat

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Hardseat-Seatless Unit Tandem Valves

Figure 3947-3927

Figure 3948-3928

P E D

K (Closed)

Hardseat Valve

Seatless ValveLubrication Fitting

27 24 25 26

17 19 21 28 23 22

G Dia.

R is e

M Dia.

L (Closed) A

B

H

P R1 D

K (Closed)

Hardseat Valve

Seatless ValveLubrication Fitting

27 24 25 26

1 16

1/1617 19 21 28 23 22

G Dia.

R is e

M Dia.

L (Closed)

A

B

E

Note: 1. See page 3 “Diameter of Raised Face” (in Flange Dimensions table) for “R” dimensions.

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Hardseat-seatless Unit Tandem Valves

Figure 6978-6954

K (Closed)

Hardseat Valve

Seatless Valve

Lubrication Fitting

27 24 25 26 15

17 19 21 28 23 22

G

R is e

M Dia.

31/2

31/2

L (Closed) A

1/4 B

E

P E D

K (Closed)

Hardseat Valve

Seatless Valve

Lubrication Fitting

27 24 25 26 15

17 19 21 28 23 22

G

R is e

M Dia.

31/2

31/2

L (Closed)

A

BH

P R1 D

Note: 1. See page 3 “Diameter of Raised Face” (in Flange Dimensions table) for “R” dimensions.

Figure 6977-6953

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Hardseat-Hardseat Unit Tandem Valves

Figure 6977-6977

P E D

K (Closed)

16 31 21 28 23 22

Rise

R is e

M Dia.

L (Closed)

A

A H

31/2

P E D

K (Closed)

16 3121 22

Rise

R is e

M Dia.

L (Closed)

A

A

H

31/2

Figure 6981-6981 and 6983-6983

Copyright © 2009 Tyco Flow Control. All rights reserved. YAWMC-0404

Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services.

Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S.and foreign countries. Tyco reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA.

www.tycoflowcontrol.com

Hardseat-Hardseat Unit Tandem Valves

The “C” dimension for flanged and socketweld valves is pipe-inlet-to-pipe-outlet offset.

K (Closed)

22 31

Rise R is e

M Dia.

L (Closed)

L (Closed)

A

A

E

31/2

K (Closed)

163121 22

Rise

Rise

C

R is e

M Dia.

L (Closed)

A

A

E

31/2

Note:

1. See page 3 “Diameter of Raised Face” (in

Flange Dimensions table) for “R” dimensions.Figure 6982-6982

Figure 6978-6978

P R1 D

P R1 D