ATTACH 8 DIN EU Standard.pdf

Conversion of German DIN Construction Standards to European Equivalents

German Standard Existing DIN Norms in the document

European Standard Italian Standard

DIN 10; 1997-06

Squares of parallel shanks for rotating tools

10 uni 4090 uni 6760

DIN 483, 2005-10

Concrete kerb units - Shapes, dimensions, marking

483 EN 1340;2003-08

Concrete kerb units; Requirements and test methods in addition to DIN 483; 2005-10

485 substitution is EN 1339, Aug. 2003 Concrete paving flags - Requirements and test methods;

1013 substitution is EN 10060, 2004-02 Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions

DIN 1025; 1995-05

Hot rolled I-beams - Part 1: Narrow flange I-beams, I-serie - Dimensions, masses, sectional properties Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties Hot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional properties Hot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties Hot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties Warmgewalzte I-Träger - Teil 1: Schmale I-Träger, I-Reihe - Maße, Masse, statische Werte Warmgewalzte I-Träger - Teil 2: I-Träger, IPB-Reihe; Maße, Masse, statische Werte DIN 1025-2; 1995-11: Warmgewalzte I-Träger - Teil 2: I-Träger, IPB-Reihe; Maße, Masse, statische Werte DIN 1025-3; 1994-03: Warmgewalzte I-Träger; Breite I-Träger, leichte Ausführung, IPBl-Reihe; Maße, Masse, statische Werte DIN 1025-4; 1994-03: Warmgewalzte I-Träger; Breite I-Träger, verstärkte Ausführung, IPBv-Reihe; Maße, Masse, statische Werte DIN 1025-5; 1994-03 : Warmgewalzte I-Träger; Mittelbreite I-Träger, IPE-Reihe;

Maße, Masse, statische Werte

1025 UNI 5397, 5398, 5679, UNI 5680

1/39 e7pprdsc Typewritten Text e7pprdsc Typewritten Text e7pprdsc Typewritten Text e7pprdsc Typewritten Text

Norms in the document

European Standard Italian Standard

DIN 1026-1; 2000-03

Hot rolled steel channels - Part 1: Taper flange steel channels; dimensions, masses and sectional properties Corrigenda to DIN 1026-1:2000-03 Hot rolled steel channels - Part 2: Parallel flange steel channels; Dimensions, masses and sectional properties Warmgewalzter U-Profilstahl - Teil 1: Warmgewalzter U-Profilstahl mit geneigten Flanschflächen; Maße, Masse und statische Werte Berichtigungen zu DIN 1026-1:2000-03

1026 Hot rolled steel channels - Tolerances on shape, dimensions and mass; EN 10279:2000 UNI EU 54

DIN 1045; 2001-07

Concrete, reinforced and prestressed concrete structures Part 2: Concrete; Specification, properties, production and conformity;

Application rules for DIN EN 206-1; Amendment A1; 2005-01 Part 3: Execution of structures; Amendment A1: 2005-01 Part 4: Additional rules for the production and conformity control of prefabricated elements DIN 1045-100; 2005-02: Concrete, reinforced and prestressed concrete structures

1045 DIN EN 206-1;2001-07

Concrete - Part 1: Specification, performance, production and conformity

DIN V ENV 206;1990-10

in addition to DIN 1045

DIN 1101, 2000-06

Wood wool slabs and multilayered slabs as insulating materials in building - Requirements, testing Holzwolle-Leichtbauplatten und Mehrschicht-Leichtbauplatten als Dämmstoffe für das Bauwesen - Anforderungen, Prüfung

DIN 1102; 1989-11

Installation of DIN 1101 wood wool slabs and sandwich composite panels

1101 in addition to DIN 1101 Thermal insulating products for building applications - Determination of length and width; EN 822:1994

EN 822:1994-11;

Thermal insulating products for building applications - Determination of thickness;

EN 823:1994

Thermal insulating products for building applications - Determination of squareness; EN 824:1994 Thermal insulating products for building applications - Determination of compression behaviour;

EN 826:1996

Thermal insulating products for building applications - Determination of the apparent density;

EN 1602:1996

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; EN 1607:1996 Thermal insulating products for building applications - Determination of bending behaviour; EN 12089:1997 EN 13168: Thermal insulating products for building applications

DIN 1187; 1982-11

Dränrohre aus weichmacherfreiem Polyvinylchlorid (PVC hart); Maße, Anforderungen, Prüfungen Unplasticized polyvinyl chloride (PVC-U) drainpipes; Dimesions, requirements, testing

1187 UNI 10968-1

2/39 document

European Standard Italian Standard

DIN 1211-1-3; 2003-05;

Steigeisen für zweiläufige Steigeisengänge - Teil 1: Steigeisen zum Einmauern oder Einbetonieren Step irons for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete Step irons for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units Step irons for staggered manhole steps - Part 3: Bolted-on step irons

1211 in additon to DIN 1211 DIN EN 13101; 2003-04: Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity Founding - Grey cast irons; EN 1561:1997;

DIN 1212-1, -2, -3, Ausgabe:2003-05 Steigeisen mit Aufkantung für zweiläufige Steigeisengänge - Teil 1: Steigeisen zum Einmauern oder Einbetonieren Steigeisen mit Aufkantung für zweiläufige Steigeisengänge - Teil 2: Steigeisen zum Einbau in Betonfertigteile Steigeisen mit Aufkantung für zweiläufige Steigeisengänge - Teil 3: Steigeisen zum An- und Durchschrauben Step irons with upstand for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete Step irons with upstand for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons

1212 in additon to DIN 1212 DIN EN 13101; 2003-04: Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity Founding - Grey cast irons; EN 1561:1997;

DIN 1221, Ausgabe:1992-02 Schmutzfänger für Schachtabdeckungen Dirt trap for manhole covers

DIN 1229, Ausgabe:1996-06 Einheitsgewichte für Aufsätze und Abdeckungen für Verkehrsflächen Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas

1229 in addition to EN 124:1994: Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control;

Founding - Grey cast irons; EN 1561:1997;

DIN 1236-1 - 3, 1981-11

Betonteile und Eimer für Abläufe; Klassen A und B; Bauart, Einbau und Zusammenstellungen, Betonteile, Eimer Class A and class B concrete elements and buckets for gullies; design;

installation and assemblies, concrete elements, buckets

1236 in addition to EN 1253-1:2003: Gullies for buildings - Part 1: Requirements EN 1253-2:2003: Gullies for buildings - Part 2: Test methods;

EN 1253-3:1999: Gullies for buildings - Part 3: Quality control;

EN 1253-4:1999: Gullies for buildings - Part 4: Access covers;

EN 1253-5:2003: Gullies for buildings - Part 5: Gullies with light liquids closure;

DIN 1298, Ausgabe:1978-07 Verbindungsstücke für Feuerungsanlagen Rohre, Rohrknie und Rohrbogen aus Metall, für Abgase

1298 replaced with DIN EN 1856 Teil 2 DIN EN 1856-2, Ausgabe:2004-10 Abgasanlagen - Anforderungen an Metall-Abgasanlagen - Teil 2: Innenrohre und Verbindungsstücke aus Metall; Deutsche Fassung EN 1856-2:2004 Connection parts for heating plants; flue gas tubes, flue gas tube knees and flue gas tube bends from metal sheet

3/39 document

European Standard Italian Standard

1385 EN 997; 2003: WC pans and WC suites with integral trap EN 33; 2003: Pedestal W.C. pans with close coupled flushing cistern - Connecting dimensions EN 38; 1992: Wall hung W.C. pan with independent water supply; connecting dimensions EN 33 Toilettenspülklosett

DIN 1390, Teil 1, 1975-11, Teil 2 79-10 Urinale aus Sanitär-Porzellan, wandhängend

1390 prEN 13407:1998 Wall-hung urinals - Functional requirements and test methods

1629 substitution for EN 10208-1 , 1998-02, Stahlrohre für Rohrleitungen für brennbare Medien - Technische Lieferbedingungen - Teil 1: Rohre der Anforderungsklasse A;

Steel pipes for pipe lines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A;

EN 10216-1; 2004-07, Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur;

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties;

EN 10224; 2005-12, Rohre und Fittings aus unlegiertem Stahl für den Transport von Wasser und anderen wässrigen Flüssigkeiten - Technische Lieferbedingungen Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions;

EN 10297; 2003-06, Nahtlose kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten Stählen Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes;

1705 EN 1982; 1998

Copper and copper alloys - Ingots and castings

1946 EN 12792:2003

Ventilation for buildings - Symbols, terminology and graphical symbols;

Corrigenda to DIN EN 12792:2004-01

1988 substitution for EN 806-1 Specifications for installations inside buildings conveying water for human consumption - Part 1:

Specification for installations inside buildings conveying water for human consumption - Part 2 2001-12; Technische Regeln für Trinkwasser-Installationen - Teil 1: Allgemeines;

2005-06; Technische Regeln für Trinkwasser-Installationen - Teil 2: Planung EN 1717; 2000: Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow - Technical rule of the DVGW

4/39 document

European Standard Italian Standard

DIN 1999-100; 2003-10

Installations for separation of light liquids - Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2

1999 EN 858-1:2002 + A1:2004

Separator systems for light liquids (e. g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control;

EN 858-2:2003

Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance Installations for separation of light liquids - Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2

2394 EN 10305-3:2002:

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

2395 EN 10305-3:2002

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

DIN 2403, 1984-03

Identification of pipelines according to the fluid conveyed Kennzeichnung von Rohrleitungen nach dem Durchflußstoff 2005-04: draft

2403 UNI 5634

DIN 2404, 1942-12

Identification Colour Code for Heating System Pipelines Kennfarben für Heizungsrohrleitungen

2440 EN 10255; 2004

Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions

2441 EN 10255; 2004

Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions

DIN 2442; 1963:

Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to Gewinderohre mit Gütevorschrift;

2442 ISO 7598, 1988

Stainless steel tubes suitable for screwing in accordance with ISO 7-1

UNI ISO 1179:1982, UNI 3466:1954

2448 EN 10220:2002

Seamless and welded steel tubes - General tables of dimensions and masses per unit length

2458 EN 10220:2002

Seamless and welded steel tubes - General tables of dimensions and masses per unit length

2527 EN 1092-1:2001

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated

2566 EN 1092-1:2001

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated

5/39 document

European Standard Italian Standard

DIN 2605-1; 1991-02

Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor

DIN 2605-2; 1995-06

Butt welding fittings - Elbows - Part 2: Full correlation of utilization

2605 in addition with: EN 10253-1:1999, draft: Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements prEN 10253-2:1999: Butt welding pipe fittings - Part 2: Wrought carbon and ferritic alloy steel with specific inspection requirements prEN 10253-3:2004: Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements prEN 10253-4:2003: Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

DIN 2615-1;1992-05

Steel butt-welding pipes fittings; tees with reduced pressure factor DIN 2615-2: Steel butt-welding pipe fittings; tees for use at full service pressure Formstücke zum Einschweißen; T-Stücke; Verminderter Ausnutzungsgrad

2615 in addition with: EN 10253-1:1999, draft: Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements prEN 10253-2:1999: Butt welding pipe fittings - Part 2: Wrought carbon and ferritic alloy steel with specific inspection requirements prEN 10253-3:2004: Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements prEN 10253-4:2003: Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

DIN 2616-1, 1991-02

Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor Steel butt-welding pipe fittings; reducers for use at full service pressure Formstücke zum Einschweißen; Reduzierstücke; Verminderter Ausnutzungsgrad

2616 in addition with EN 10253 EN 10253-1:1999: Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements;

prEN 10253-2:1999: Butt welding pipe fittings - Part 2: Wrought carbon and ferritic alloy steel with specific inspection requirements;

prEN 10253-3:2004: Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements;

prEN 10253-4:2003: Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements;

2631 EN 1092-1: 2002-06: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated prEN 1092-1:2005: PN-designated - Part 1: Steel flanges EN 1092-2:1997: PN designated - Part 2: Cast iron flanges EN 1092-3:2003 + AC:2004: Part 3: Copper alloy flanges EN 1092-4:2002: Part 4: Aluminium alloy flanges EN 1514-1:1997: Flanges and their joints - Dimensions of gaskets for PN-designated flanges Part 1: Non-metallic flat gaskets with or without inserts EN 1514-2:2005:Part 2: Spiral wound gaskets for use with steel flanges EN 1514-3:1997: Part 3: Non-metallic PTFE envelope gaskets EN 1514-4:1997: Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges EN 1514-6:2003: Part 6: Covered serrated metal gaskets for use with steel flanges EN 1514-7:2004: Part 7: Covered metal jacketed gaskets for use with steel flanges EN 1515-2:2001: Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated

6/39 document

European Standard Italian Standard

2633 EN 1092-1:2001

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated

2635 EN 1092-1:2001: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated

2981 EN 10241:2000: Steel threaded pipe

2982 EN 10241:2000: Steel threaded pipe

2986 10241:2000: Steel threaded pipe

3055 EN 12385-4:2002: Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

3221 EN 14339:2005: Underground fire hydrants

3222 EN 14384:2005: Pillar fire hydrants

DIN 3430, 1986-06

Gas valves; angle pattern ball shut-off valves

3430 UNI 10197, UNI 8454, UNI 9734

DIN 3502, :2002-10

Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW

3502 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; EN 1213:1999

UNI 10197

DIN 3509, 1981-12

Valves for water supply dimensional characteristics; taps PN 10

3509 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; EN 1074-2:2000 + A1:2004 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification;

EN 200:2004

DIN 3512, 2002-10

Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW

3512 additon to EN 1213:1999: Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements

DIN 3523: 2001-04

Fittings for drinking water installations - Extensions

3523 UNI 10190, UNI 10191

DIN 3535-1, 1991-07 : Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests DIN 3535-5; 1993-12: Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests DIN 3535-6; 1999-12: Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains

3535 part 2 in addition with EN 279 and EN 291, part 3 in addition with 682

DIN 3844,1981-12

Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials

3844 UNI SPERIMENTALE 7942, UNI 10673

7/39 document

European Standard Italian Standard

4032 replaced with prenorm V1201, 2004-08 Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity EN 1916:2002: Concrete pipes and fittings, unreinforced, steel fibre and reinforced Corrigenda to DIN EN 1916:2003-04

4033 EN 1610:1997: Construction and testing of drains and sewers

DIN V 4034-1, 2004-08: Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1:

Requirements, test methods and evaluation of conformity DIN 4034-2, 1990-10: Precast unreinforced and reinforced concrete components for well shafts and soakaways; dimensions and technical delivery conditions

4034 in addition to EN 1917:2002: Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

V 1201, 2004-08: Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity

4035 EN 639:1994: Common requirements for concrete pressure pipes, including joints and fittings EN 640:1994: Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings EN 1916:2002: Concrete pipes and fittings, unreinforced, steel fibre and reinforced Corrigenda to DIN EN 1916:2003-04

DIN 4051, 2002-04 : Sewer clinkers - Requirements, testing, quality control Kanalklinker - Anforderungen, Prüfung, Überwachung prenorm DIN 4052, 2006-05: Concrete elements and buckets for road gullies - Part 1: General requirements and installation Part 2: Summary and designations, Part 3: Concrete elements, Part 4: Buckets

4052 in addition to EN 124:1994: Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control

DIN 4074-1; 2003-06

Strength grading of wood - Part 1: Coniferous sawn timber DIN 4074-2; 1958-12: Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood) DIN 4074-3, Part 3: Grading machines for sawn timber, requirements and testing DIN 4074-4, Part 4: Certificate of suitability for machine grading DIN 4074-5, Part 5: Sawn hard wood

4074 in addition to EN 14081-1:2005/2006-03: Timber structures - Strength graded structural timber with rectangular cross section - Part 1 EN 14081-2:2005/2006-03: Part 2: Machine grading; additional requirements for initial type testing EN 14081-3:2005/2006-03: Part 3: Machine grading; additional requirements for factory production control EN 14081-4:2005/2006-02: Part 4: Machine grading - Grading machine settings for machine controlled systems

DIN 4095;1990-06: Planning, design and installation of drainage systems protecting structures against water in the ground

8/39 document

European Standard Italian Standard

DIN 4102-1; 1998-05: Fire behaviour of building materials and building components - Part 1: Building materials; concepts, requirements and tests DIN 4102-2: Building Components; Definitions, Requirements and Tests DIN 4102-3: Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests DIN 4102-4: Synopsis and application of classified building materials, components and special components; Amendment A1 DIN 4102-5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests DIN 4102-6: Ventilation Ducts; Definitions, Requirements and Tests DIN 4102-7: Roofing; definitions, requirements and testing DIN 4102-8: Small scale test furnace DIN 4102-9: Fire behaviour of building materials and elements; seals for cable penetrations;

concepts, requirements and testing DIN 4102-11: pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing DIN 4102-12: Circuit integrity maintenance of electric cable systems;

requirements and testing DIN 4102-13: fire resistant glazing; concepts, requirements and testing DIN 4102-14: determination of the burning behaviour of floor covering systems using a radiant heat source DIN 4102-15: Fire behaviour of building materials and elements "Brandschacht" DIN 4102-16: "Brandschacht" tests DIN 4102-17: determination of melting point of mineral fibre insulating materials;

concepts, requirements and testing

4102 in addition to EN 13501-3:2005: Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers EN 13501-5:2005: Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests EN 13238:2001: Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates European Standards protection against fire:

EN 179:1997 + A1:2001: Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods , prEN 179:2003 EN 357:2004: Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance EN 1125:1997 + A1:2001: Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods EN 1363-1:1999: Fire resistance tests - Part 1: General requirements, Part 2: Alternative and additional procedures EN 1364-1:1999 Fire resistance tests on non-loadbearing elements - Part 1: Walls;

Part 2: Ceilings, prEN 1364-4:2002 Curtain walling, part configuration EN 1365-1:1999 Fire resistance tests on loadbearing elements - Part 1: Walls Part 2: Floors and roofs, Part 3: Beams, Part 4: Columns, part 5: Balconies and walkways part 6: Stairs; prEN 15080-8:2004: Extended application of results from fire resistance tests - Part 8: Beams EN 1366-1:1999 Fire resistance tests on service installations - Part 1: Ducts, part 2: Fire dampers, part 3: Penetration seals prEN 1366-4:2003 Linear joint seals, part 5: Service ducts and shafts part 6: Raised access and hollow core floors part 7: Conveyor systems and their closures, part 8: Smoke extraction ducts

9/39 document

European Standard Italian Standard

DIN 4102-18: fire barriers, verification of automatic closure (continuous performance test) DIN 4102-19: Surface products on walls and under floors inside rooms; test room for additional assessments DIN V 4102-21: Fire behaviour of building materials and building components -

Part 9: Single compartment smoke extraction ducts, part 10: Smoke control dampers;prEN 15080-12:2004:

Extended application of results from fire resistance tests - Part 12: Penetration sealsEN 1634-1:2000:

Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shuttersPart 2: Fire door hardware - Building hardware for fire resisting doorsets and openable windows Part 3: Smoke control doors and shutters prEN 15269-1:2005: Extended application of test results for fire resistance for doorsets and shutter assemblies - For doors and shutters - Part 1: General requirements for fire resistance;

Part 2: Steel hinged and pivoted doorsets;

Part 3: Timber hinged and pivoted doorsets;

EN 1838:1999: Lighting applications - Emergency lighting EN 12416-1:2001/A1:2004: Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components Part 2: Design, construction and maintenance EN 13501-3:2005: Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers Part 5: Classification using data from external fire exposure to roofs tests EN 13823:2002: Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

EN ISO 1182:2002: Reaction to fire tests for building products - Non-combustibility tests (ISO 1182:2002);

EN ISO 1716:2002: Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002);EN ISO 9239-1:2002: Reaction to fire tests for floorings - Part 1:

Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002), Part 2:

Determination of flame spread at a heat flux level of 25 kW/m

DIN 4121, 1978-07

Hanging wire-plaster ceilings; plaster ceilings with plaster-bearing steel-inserts, rabitz ceilings, directions for the execution

DIN 4140, 1996-11: Insulation work on industrial installations and building equipment - Execution of thermal and cold insulation in work DIN 4140, 2005-12: Insulation work on industrial installations and building equipment - Execution of thermal and cold insulation

4140 in addition to Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature; EN 14706:2005

DIN 4172, 1955-07

Modular Co-ordination in Building Construction in accordance with DIN 18 100, 1983-10: Doors; wall openings for doors with dimensions

4172 UNI 7861, UNI 7864, UNI 7865, UNI 7866,

UNI 8105, UNI 8151,

10/39 document

European Standard Italian Standard replaced with: DIN 1045-1; 2001-07 Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction, Corrigenda to DIN 1045-1:2001-07

4219 DIN EN 206-1;

Concrete, reinforced and prestressed concrete structures - Part 2: Concrete; Specification, properties, production and conformity; Application rules for DIN EN 206-1; Amendment A1:

2005-01

4242 EN 1051-1:2003: Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description

4261-1 replaced with: EN 12566-1:2000 + A1:2003: Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks (includes amendment A1:2003);

DIN 4262-1, Ausgabe:2001-01 Piping systems for civil engineering subsoil drainage - Part 1: Plastic pipes, DIN 4262-3, 1991-02: Concrete drainage pipes and multipurpose pipes for highway and civil engineering purposes; requirements and testing

4262 in addition to prEN 1401-1:2006: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system;

EN 12666-1:2005: Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system;

4279 EN 805:2000

Water supply - Requirements for systems and components outside buildings

DIN 4281, 1998-08

Concrete for prefabricated sewage units - Manufacture, requirements, testing and quality control

4281 UNI 8981

4420 replaced with: EN 12811-1, 2004-03 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design EN 12811-2:2004: Information on materials EN 12811-3:2002: Load testing, Corrigenda to DIN EN 12811-3:2003-02 Temporäre Konstruktionen für Bauwerke - Teil 1: Arbeitsgerüste - Leistungsanforderungen, Entwurf, Konstruktion und Bemessung; EN 12811-1:2003 EN 12811-2, Ausgabe:2004-04 Temporäre Konstruktionen für Bauwerke - Teil 2: Informationen zu den Werkstoffen; EN 12811-2:2004

DIN 4741-1, Ausgabe:1984-08 Ventilation plants; polypropylene (PP) pipes; calculation of the minimum wall thickness DIN 4741-2: Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses DIN 4741-5: Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness

4741 DIN EN 13180, 2002-03

Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible

DIN 4795: 1991-04: Draft regulators for chimneys; concepts safety requirements, testing, marking

4795 UNI EN 1443

DIN 7865-1, 1982-02

Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions

DIN 7961,1990-02

Dogs

11/39 document

European Standard Italian Standard

DIN 8061, Ausgabe:1994-08 Unplasticized polyvinyl chloride pipes - General quality requirements and testing 1984-02: Unplasticized polyvinylchloride pipes; chemical resistance of pipes and fittings of (PVC-U)

8061 UNI 7447, UNI ISO/TR 7473

DIN 8078, 1996-04

Polypropylene (PP) pipes - PP-H (Type 1), PP-B (Type 2), PP-R (Type 3) - General quality requirements and testing DIN 8078, 1982-02: Pipes of polypropylene (PP); chemical resistance of pipes and fittings

8078 UNI 10968, UNI 8318, UNI 8319, UNI

8321, UNI 8536

14655 EN 54-11:2001/A1:2005: Fire detection and fire alarm systems - Part 11: Manual call points

DIN 14661:2001-08

Firefighting equipment - Fire-brigade control panel for fire detection and fire alarm systems

14661 UNI 11047, UNI 802, UNI 9795,

cancelled 16850

16851 EN 1816:1998

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing

17440 EN 10296-2:2005

Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel EN 10297-2:2005: Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel EN 10028-7:2000: Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10088-2:2005: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes;

EN 10088-3:2005: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes 10216-5:2004: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes EN 10217-7:2005: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes;

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes;

EN 10222-1:1998 + A1:2002Steel forgings for pressure purposes - Part 1: General requirements for open die forgings EN 10222-5:1999: Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels EN 10250-1:1999: Open die steel forgings for general engineering purposes - Part 1: General requirements EN 10250-4:1999: Open die steel forgings for general engineering purposes - Part 4: Stainless steels;

12/39 document

European Standard Italian Standard

17455 replaced with EN 10296-2:2005: Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions

EN 10312:2002 + A1:2005

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions

DIN 17611, 2000-12

Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery

17611 UNI 9795:1991

18054 ENV 1627:1999: Windows, doors, shutters - Burglar resistance - Requirements and classification;

ENV 1628:1999: Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under static loading;

ENV 1629:1999: Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading; German version ENV 1630:1999: Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts;

DIN 18073, 1990-11

Roller shutters, solar shading and black-out equipment in building construction;

concepts and requirements

18073 Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method;

EN 13363-1:2003

Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method; EN 13363-2:2005

UNI EN 12412, UNI EN 12833

13/39 document

European Standard Italian Standard

DIN 18164-2, 2001-09

Cellular plastics as insulating building materials - Part 2: Insulating materials for impact sound insulation made of rigid expanded polystyrene foam

18164 EN 13163:2001: Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification;

EN 13164:2001/A1:2004Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification EN 13165:2001 + A1:2004 + A2:2004Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification EN 822:1994: Thermal insulating products for building applications - Determination of length and width EN 823:1994: Thermal insulating products for building applications - Determination of thickness EN 824:1994: Thermal insulating products for building applications - Determination of squareness EN 825:1994: Thermal insulating products for building applications - Determination of flatness EN 826:1996: Thermal insulating products for building applications - Determination of compression behaviour EN 1602:1996: Thermal insulating products for building applications - Determination of the apparent density; German version EN 1604:1996: Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1605:1996/prA1:2006: Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions;

German version EN 1608:1996: Thermal insulating products for building applications - Determination of tensile strength parallel to faces

18164-1 replaced with EN 13163, EN 13164, EN 13165 (parts), EN 13166, DIN EN 822 bis DIN EN 826, EN 1602, EN 1604, EN 1605, EN 1608, V 4108-part 10

DIN 18164-2 : 1991-03 18164-2 in addition to EN 12431;1998-08;

14/39 document

European Standard Italian Standard replaced with: DIN V 4108-10: Thermal insulation and energy economy in buildings - Application-related requirements for thermal insulation materials - Part 10: Factory made products DIN 18165-2 : Fibrous insulating building materials - Part 2: Impact sound insulating materials

18165 EN 822:1994: Thermal insulating products for building applications - Determination of length and width EN 823:1994 Determination of thickness, EN 824:1994 Determination of squareness, EN 825:1994 Determination of flatness, EN 826:1996 Determination of compression behaviour EN 1602:1996 Thermal insulating products for building applications - Determination of the apparent density EN 1604:1996 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1605:1996 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions EN 1607:1996: Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces;

EN 1608:1996 Thermal insulating products for building applications - Determination of tensile strength parallel to faces;

EN 12087:1997 Thermal insulating products for building applications - Determination of long term water absorption by immersion;

EN 12431:1998 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products;

EN 13162:2001 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification

DINV 4108-10; 2004-06Wärmeschutz- und Energie-Einsparung in Gebäuden - Anwendungsbezogene Anforderungen an Wärmedämmstoffe - Teil 10:

Werkmäßig hergestellte Wärmedämmstoffe Vornorm , 2004-09 Berichtigungen zu DIN V 4108-10:2004-06

18165-1 in addition to DIN EN 822 - DIN EN 826, DIN EN 1602, DIN EN 1604, DIN EN 1605, DIN EN

1607, DIN EN 1608, DIN EN 12087, DIN EN 13162

DIN 18165-2, 2001-09

Fibrous insulating building materials - Part 2: Impact sound insulating materials Faserdämmstoffe für das Bauwesen - Teil 2: Dämmstoffe für die Trittschalldämmung

18165-2 in addition to DIN EN 12431:1998-08 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998 Ausgabe:1998-08 Wärmedämmstoffe für das Bauwesen - Bestimmung der Dicke von Dämmstoffen unter schwimmendem Estrich

DIN18168T1EErl ND 1982: Construction supervision: technical building regulations; DIN 18168, part 1, lightweight ceiling linings and counter ceilings Bauaufsicht: Technische Baubestimmungen; DIN 18168 Teil 1, Leichte Deckenbekleidungen und Unterdecken, Ausgabe:1982-08-05 in Verbindung mit DIN EN 13964

18168 in addition to EN 13964:2004: Suspended ceilings - Requirements and test methods

18168-1 replaced with EN 13964 2004-06 Suspended ceilings - Requirements and test methods

18180 cacelled and replaced with EN 520:2004: Gypsum plasterboards - Definitions, requirements and test methods;

Gipsplatten - Begriffe, Anforderungen und Prüfverfahren

15/39 document

European Standard Italian Standard

DIN 18181 1990: Gypsum plasterboards for building construction; guidelines regarding workmanship 2004-08: Application

18181 EN 520:2004. Gypsum plasterboards - Definitions, requirements and test methods; German version EN 14190:2005: Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods;

EN 13950:2005: Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods;

DIN 18182-1 1987-01: Accessoires for use with gypsum plasterboards; steel plate sections DIN 18182-1 2004-09: Accessories for use with gypsum plasterboards - Part 1:

Steel plate sections DIN 18182-2 1987-01: Accessories for use with gypsum plasterboards; dry wall screw DIN 18182-3 1987-01: Accessories for use with gypsum plasterboards; staples DIN 18182-4 1987-01: Accessories for use with gypsum plasterboards; nails

18182 EN 520, 2004: Gypsum plasterboards - Definitions, requirements and test methods;

EN 14195, 2005: Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods;

18182-1 2004-09: Accessories for use with gypsum plasterboards - Part 1: Steel plate sections replaced with: EN 14566 2002: Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods;

DIN 18183, 1988-11: Prefabricated gypsum plasterboard; metal stud partitions DIN 18183 2003-09: Sound insulation in buildings - Construction examples and calculation methods; Amendment A1

18183 UNI 10718

DIN 18184 1991-06. Gypsum plaster boards with polystyrene or polyurethane rigid foam as insulating material

18184

18251 EN 12209, 2003: Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods;

DIN 18252 1999-09: Profile cylinders for door locks - Terminology, dimensions, requirements and marking DIN 18252 2006-01: Profile cylinders for door locks - Terminology, dimensions, requirements and marking

18252 DIN EN 1303, 2005: Building hardware - Cylinders for locks - Requirements and test methods;

DIN 18257 2003-03: Building hardware - Security plates - Definitions, measurements, requirements, marking

18257 DIN EN 1906 2002: Building hardware - Lever handles and knob furniture - Requirements and test methods;

DIN 18300, 2002-12:

Contract procedures for building works - Part C: General technical specifications for building works; Earthworks VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Erdarbeiten

18300

16/39 document

European Standard Italian Standard

DIN 18320: 2002-12

Contract procedures for building works - Part C: General technical specifications for building works; Landscaping works VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV);

Landschaftsbauarbeiten

18320 UNI 11109

DIN 18330: 2005-01

Contract procedures for building works - Part C: General technical specifications for building works - Masonry work VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV) - Mauerarbeiten

18330 UNI 9124

DIN 18331:2005-01

Contract procedures for building works - Part C: General technical specifications for building works - Concrete works VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV) - Betonarbeiten

18331 UNI 8981

DIN 18355:2005-01

Contract procedures for building works - Part C: General technical specifications for building works - Joinery works VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV) - Tischlerarbeiten

18355 in addition to EN 942:1996: Timber in joinery - General classification of timber quality;

DIN 18361:2002-12

Contract procedures for building works - Part C: General technical specifications for building works; Glazing works VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Verglasungsarbeiten

18361

DIN 18363:2002-12

Contract procedures for building works - Part C: General technical specifications for building works; Painting works VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Maler- und Lackiererarbeiten

18363 UNI 10208:1993, UNI 10209:1993,

UNI 10209:1993 , UNI 10210,

UNI 10211, UNI 10212:1993 ,

UNI 10213:1993 , UNI 10214:1993,

UNI 10215:1993 ,UNI 10216:1993 , UNI

10216:1993 , UNI 10369:1994

UNI 10705:1999, UNI 10945:2001 ,

UNI 10997:2002 , UNI 11162:2005 ,

UNI 8403:1982 ,

DIN 18366:2002-12

Contract procedure for building works - Part C: General technical specifications for building works; Wall paper hanging VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Tapezierarbeiten

18366 EN 233:1999: Wall coverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings;

UNI 10971:2002

17/39 document

European Standard Italian Standard

DIN 18380:2002-12

Contract procedures for building works - Part C: General technical specifications for building works; Systems for heating and central water heating VOB Vergabe- und Vertragsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Heizanlagen und zentrale Wassererwärmungsanlagen

18380 UNI 5364:1976, UNI 5364:1976, UNI

5570:1985 , UNI 5571:1965 , UNI

6501:1969 , UNI 6502:1969 , UNI

7271:1988 + A1:1990 + A2:1991 , UNI

7357:1974+A101:1983+A83:1979+A3:

1989, UNI 7643:1976 , UNI 7936:1979 +

A130:1984 + A168:1987 , UNI 7939-

1:1979 , UNI 7941:1979 , 7942:1979 , UNI

8061:1980 + A132:1984 , UNI 8063:1980,

UNI 8065:1989 , UNI 8156:1981, UNI

8157:1984 , UNI 8158:1982 , UNI 8183-

1:1980 , UNI 8199:1981 , UNI 8211:1981

UNI 8364:1984 + A146:1984 , UNI

8365:1986 UNI 8465:1983 , UNI

8853:1986 , UNI 8854:1986 , UNI

8855:1986 , UNI 8857:1986 , UNI

8858:1985 , UNI 8937:1987, UNI

9019:1987 , UNI 9021:1986 , UNI

9025:1987 , UNI 9174:1987 + A1:1996 ,

UNI 9221:1988 , UNI 9317:1989 , UNI

9511-1:1989 , UNI 9711:1991 , UNI

9753:1990 , UNI 9893:1991 + A1:1994 ,

UNI 7357:1974/A101:1983 , UNI HD

1003:1992

DIN 18384:2000-12

Contract procedure for building works - Part C: General technical specifications for building works; Lightning protection systems VOB Verdingungsordnung für Bauleistungen - Teil C: Allgemeine Technische Vertragsbedingungen für Bauleistungen (ATV); Blitzschutzanlagen

18384 DIN EN 50164 -1 (VDE 0185 Teil 201) 04/00

18421 replaced with: EN 1338:2003 Concrete paving blocks - Requirements and test methods;

EN 1340:2003: Concrete kerb units; Requirements and test methods

18501 cancelled, replaced with EN 1338;2005-03 Concrete paving blocks - Requirements and test methods;

18502 cancelled, replaced with: DIN EN 1342 - 2001 Setts of natural stone for external paving - Requirements and test methods;

Pflastersteine aus Naturstein für Außenbereiche;

18503 EN 1344:2002: Clay pavers - Requirements and test methods;

18/39 document

European Standard Italian Standard

DIN 18540:1995-02 / draft 2005-09 Sealing of exterior wall joints in building using joint sealants Abdichten von Außenwandfugen im Hochbau mit Fugendichtstoffen

18540 in addition to EN 14187-9:2006: Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants;

EN 14187-2:2003: Part 2: Test method for the determination of tack free time;

EN 14187-3:2003: Part 3: Test method for the determination of self-levelling properties;

EN 14187-4:2003: Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel;

EN 14187-5:2003: Part 5: Test method for the determination of the resistance to hydrolysis;

German version EN 14187-6:2003: Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids; EN 14187-7:2003: Part 7: Test method for the determination of the resistance to flame;

EN 14187-8:2003: Part 8: Test method for the determination of the artificial weathering by UV-irradiation;

EN 14188-3:2006: Joint fillers and sealants - Part 3: Specifications for preformed joint seals;

prEN 14188-4:2006

UNI 9610, UNI 9611, UNI ISO 11600

DIN V 18550:2005-04 : Plastering/rendering and plastering/rendering systems - Execution Putz und Putzsysteme

18550 addition to: EN 998-1:2003: Specification for mortar for masonry - Part 1: Rendering and plastering mortar Specification for mortar for masonry - Part 1: Rendering and plastering mortar; German version EN 998-1:2003, Corrigenda to DIN EN 998-1:2003-09/AC:2005

18560 EN 13318; 2000-12: Screed material and floor screeds - Definitions EN 13813:2002: Screed material and floor screeds - Screed materials - Properties and requirements;

DIN 18807 Trapezoidal sheeting in building; trapezoidal steel sheeting; general requirements and determination of loadbearing capacity by calculation /A 1:2001-05 part 2 Trapezoidal sheeting in building; trapezoidal steel sheeting; determination of loadbearing capacity by testing / A1:2001-05 part 3 Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design A1:2001-05 Festigkeitsnachweis und konstruktive Ausbildung;

Trapezoidal sheeting in buildings - Part 6: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by calculation part 7 Trapezoidal sheeting in buildings - Part 7: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by test Trapezoidal sheeting in buildings - Part 8: Aluminium trapezoidal sheeting and their connections; verifications of load bearing capacity and usability Trapezoidal sheeting in buildings - Part 9: Aluminium trapezoidal sheeting and their connections; application and construction

18807 UNI 8629 part 1 - 8, UNI 8661, UNI 8722, UNI 8763, UNI 8788, UNI 8818

DIN 18915,:2002-08

Vegetation technology in landscaping - Soil working Vegetationstechnik im Landschaftsbau - Bodenarbeiten

18915

19/39 document

European Standard Italian Standard

DIN 18917, 2002-08

Vegetation technology in landscaping - Turf and seeding Vegetationstechnik im Landschaftsbau - Rasen und Saatarbeiten

18917

DIN 18918, Ausgabe:2002-08 Vegetation technology in landscaping - Biological methods of site stabilization - Stabilization by seeding and planting,…