Atch 6 - Mens Officer Service Trousers LOE PD YAGC 85-1B Amend 3..pdf

USAFA Letter of Exception 17 March 2022 PD YAGC 85-1B Amend 3 3 November 1993

USAFA LETTER OF EXCEPTION

TROUSERS, MEN’S, SERVICE

The following exceptions will apply when Purchase Description YAGC 85-1B is used to manufacture men’s trousers for the Air Force Academy.

1. Paragraph 3.2.8.1 Slide Fastener Tape Color. Add the following:

Alternatively, the color shall be black to match the lining and pocketing.

2. Paragraph 3.2.2 Pocketing and Lining, Add the following:

3.2.2.1 Labels. Each pair of Trousers shall have a size label and a combination identification and instruction label conforming to DDD-L-20. The labels shall have colorfastness to dry cleaning.

3.2.2.2 Size Label. The size label shall show the waist size and length of the slacks in black numerals and letters and shall conform to type VI, class 2. The length may be abbreviated as follows: XS (Extra Short), S (Short), R (Regular), L (Long), or XL (Extra Long).

3.2.2.3 Combination Label. The combination identification and instruction label shall conform to type VI, class 15 and shall include the following information:

Trouser, Men’s Contract No.: DLA-100-00-0-0000 (Example) !/Wool Products Labeling Act (information as applicable) _1/

Contractor: 1/ Slacks# 2/

DRY CLEAN ONLY

1/ The contractor shall include the applicable information

3. Section 5 PACKAGING. Omit Section 5 and substitute the following:

Packaging and Marking

a. Preservation and packaging shall be in accordance with standard commercial practice.

FA700022Q0072

Attachment 6

PD YAGC 85-1B Amend 3 3 November 1993

b. Hanger boxes shall be marked to indicate the contract number, item number quantity, commodity, nomenclature, name of the contractor and “Mark for:

FX7000.” The boxes within each shipment shall be marked as to the quantity shipped (1 of 5, 2 of 5, etc). Additionally, each hanger box shall contain a packing slip indicating the cadet’s names and sizes for that particular box, see figure 1.

c. The following packaging and packing instructions shall be used in lieu of those described in paragraph 5 of the purchase descriptions

1. Packaging

i. One man’s coat and two pairs of trousers shall be placed on one hanger and covered with a .003” gauge polyethylene bag. The coat and trousers shall belong to the same cadet. The hanger shall be of such quality that it will not break in shipping and the coat and trousers will not slip off the hanger. One coat and two pairs of trousers are considered one man’s uniform.

ii. One woman’s coat and one pair of slacks shall be placed on one hanger and covered with a .003” gauge polyethylene bag. The coat and slacks shall belong to the same cadet. The hanger shall be of such quality that it will not break in shipping and the coat and trousers will not slip off the hanger. One coat and one pair of slacks are considered one woman’s uniform.

iii. Packing. Uniforms shall be packed ten uniforms per hanger box.

The uniforms shall be packed in good quality, commercial, cardboard, stand-up, hanger pack type box made specifically for shipment of garments on hangers (min 275 P.S.I. or equal), see figure

2. The hangers shall be secured to the hanging rod to prevent their coming off during shipment. All flaps shall be securely sealed with metal staples, tape, or commercial adhesive.

2. Marking. The exterior packages shall be marked in accordance with MIL-

STD-129.

3. Additional Marking. A stick-on label shall be centered near the top front, center of each polyethylene bag providing the following information:

(Contractor’s Name)

USAFA OFFICER UNIFORM

(Cadet’s Name: Last, First MI) Male or Female Coat Size Trouser/Slacks Size Skirt Size if applicable Measuring Order Form Number

4. Bar Code Labels. A removable paper ticket of regular commercial quality, reflecting the Cadet Store stock number, size 4, and brief description in either code 39 or UPC code shall be attached/affixed to each individual garment as follows:

i. Coats, Men’s: Four-corner stitched on the outer side at the bottom of the left sleeve.

ii. Coats, Women’s: Four-corner stitched on the outer side at the bottom of the left sleeve.

iii. Slacks, Women’s: Four-corner stitched on the outer side three inches to the right of the left front pocket.

iv. Trousers, Men’s: Four-corner stitched on the outer side three inches to the right of the left front pocket.

v. The contractor shall submit to the Contracting Officer a sample bar code label for approval within 30 days of notice of contract award.

4. Paragraph 6.5. First Article. The first article shall be a size 34 regular.

Custodian:

Preparing Activity:

USAF Academy CO 80840-8210 Cadet Uniform (10LRS/LGRCU) USAF Academy CO 80840-8210

Reviewing Activity:

Chief, Cadet Logistics (10LRS/LGRC) USAF Academy CO 80840-8210