Exhibit 1 - Moores Cove Trail Log.pdf
PDF 840 KB Posted
- Solicitation number
- AG-4419-S-10-0361
About this file
Exhibit 1 - Moores Cove Trail Log
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF30 Amend 2.pdf | ||
| Revised Moore Cove Trail Log .doc | DOC document | |
| Amendment 2 - cover sheet.docx | DOCX document | |
| Attachement 1 - Amend 2 - Specification rev.doc | DOC document | |
| Exhibit 1 - Revised Drawings.pdf | ||
| Section B - rev Schedule of Items.xlsx | XLSX spreadsheet | |
| SF30 Amend 1.pdf | ||
| Exhibit 6 - Maps.pdf | ||
| Attachment 2 - Wage Determination.doc | DOC document | |
| Exhibit 3 - Fletcher Creek Trail log.pdf | ||
| Exhibit 9 - Dwgs 2.pdf | ||
| Section A - SF1449.pdf | ||
| Exhibit 5 - Ivestor Gap Trail Log.pdf | ||
| Exhibit 7 - Design Parameters.pdf | ||
| Exhibit 4 - Squirrel Gap Trail Log.pdf | ||
| Exhibit 2 - Rainbow Falls Trail Log.10.pdf | ||
| Attachment 1 - Specification REV.pdf | ||
| Sections C thru M - Solicitation .doc | DOC document | |
| Exhibit 8 - Dwgs 1.pdf | ||
| Section B - Schedule of Items.pdf |
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Moore Cove Trail Assessment Log Page 1
Trail Log – Moore’s Cove
Inspection Date : Dec. 4, 2009 Inspector Name: Bruce Lowe, Eric Johnson Length: 0.67 miles Trail Class: 3 Designed Use: Hiking Existing Width: 3’-5’ Design tread width: 18”-36” Surface: Native
BMP: US276
EMP: Waterfall
This trail is easily accessible from U.S. 276 and a small parking area . The trail is short and heavily used since it leads visitors to a waterfall that is noted in many guidebooks. The trail is a day-use short hike. Puncheon or boardwalk structures need upgrading.
Station Maintenance Need
Point of Interest Notes or Photo
0+00
Begin at Moore Cove Trailhead on U.S. 276.
0+45
Bridge – no action needed
0+98 End wood bridge. Start timber/log steps, replace steps with stone or pressure-treated timber (PT) steps.
Replace crib wall with stone or PT crib.
Moore Cove Trail Assessment Log Page 2
2+68 End steps, walls.
2+78 Grade Dip-right. Restore and remove downhill barrier log.
2+98 Non function grade dip (NFGD). Cut roots on trail less than 3’ or non-supporting.
3+17 Grade dip - right
3+27 Remove log step, replace with stone or PT steps.
3+30 social trail on left, obliterate entrance
3+48 Clean out GD on right, re-establish outslope
4+39 Grade dip - right
4+77 Remove water bar.
4+77 Move trail upslope 1.5’.
replace log crib with stone or PT crib.
4+99 Center grade dip-clean out
5+10 End stone crib on lower side
5+70 Start-remove berm outslope tread
6+19 Grade dip - right
6+65 End deberm, outslope tread
6+71 Install stone or PT steps, remove old log steps
See following photo
Moore Cove Trail Assessment Log Page 3
7+09 Begin footbridge
7+20 End footbridge
7+24 Remove water bar install GD and armor wet seep
7+95 Grade dip - right
8+36 Grade dip - right
8+47 Dead and leaning hazard oak, cut and remove. Cut and remove roots
8+56 Start-replace log steps with “L” crib stone steps
Moore Cove Trail Assessment Log Page 4
8+87 End steps-begin wet area, install armored GD to drain low area
9+05 End wet drain low area
9+52 Non-functioning grade dip.
Remove water bar and clean out grade dip.
9+71 Clean out non-functioning grade dip .
10+04 Start-remove / replace timber wall with rock or PT wall. Close social trail-right.
Obliterate entrance.
Moore Cove Trail Assessment Log Page 5
10+23 End wall. Note place armor below wall to stabilize slope.
10+25 Close out incised trail-left
Place log check dams at 8’ intervals-50’ total on closed trail to rehabilitate.
10+30 Start incised tread, deberm, remove and replace log steps with PT timber box steps w/ gravel fill.
See note at 12+15
11+45 Remove non functioning water bar , install grade dip-right
11+61 Sweeping curve-left. Deberm both sides. Re-grade tread and outslope.
Moore Cove Trail Assessment Log Page 6
11+90 Remove nonfunctioning water bar. Install grade dip right.
12+15 End-steps, end incised tread.
12+55 Remove nonfunctioning water bar replace with grade dip and outslope trail
12+79 Start PT timber box crib steps over roots.
13+30 End crib steps.
13+64 Install grade dip-right. Long run out
14+11 Remove nonfunctioning water bar install grade dip-right.
14+42 Grade dip-right
14+56 Remove nonfunctioning water bar dig tread upslope
Moore Cove Trail Assessment Log Page 7
14+70 End crib steps. Grade dip-right, punch thru berm
14+95 Deberm and outslope tread
15+23 GD-right
15+46 Remove water bar install GD-right
15+62 Begin incised tread start install PT timber box crib steps
16+35 End crib steps
16+51 GD-right-Large GD
17+86 GD-right Note: Narrow trail width
18+60 Re-establish tread upslope 2’- 3’
19+09 End tread upslope. Note: maintain tread upslope
19+45 GD-right, long run out
19+70 Begin PT timber box crib steps
19+93 End crib steps
20+20 GD-right
Moore Cove Trail Assessment Log Page 8
20+49 Deberm at log step. Establish positive drainage.
20+61 Begin rock or PT crib-right.
Steps- fill to top of incised.
Armor for drainage channel-left
21+13 Extend armor stone channel to creek-left
21+28 End rock or PT crib steps
21+34 Begin rebuild abutment, re-set bridge to bear on new abutment.
21+51 End bridge reset.
21+71 Remove cordurory trail.
Install armored GD
Moore Cove Trail Assessment Log Page 9
22+05 Begin puncheon-add to existing puncheon.
Note: see detail or explanation from COR on construction of “puncheon”
22+36 Remove/rebuild puncheon- See construction detail
22+93 End puncheon.
23+37 Begin puncheon.
23+62 Connect with existing puncheon.
23+95 End existing puncheon and begin new puncheon.
Moore Cove Trail Assessment Log Page 10
24+20 End new puncheon, begin replace log steps with stone or PT crib steps.
24+94 End stone or PT crib steps.
25+03 Remove water bar and install GD-left.
25+25 Re-establish tread upslope and outslope tread.
25+67 GD-left.
26+17 Redig tread upslope and outslope the tread to drain.
26+35 Box crib over roots.
26+42 End box crib over roots.
26+47 Maintain the large roots on oak tree, crib and Fill.
26+62 End crib over roots.
Moore Cove Trail Assessment Log Page 11
26+62 GD-left.
26+67 Start PT timber box crib steps.
26+77 End box crib steps.
26+79 Start redig upslope.
27+40 GD left.
28+04 Start box stone or PT crib steps.
End redig upslope.
28+15 End box crib steps.
28+49 Start causeway/turnpike.
Use compactable soil.
28+71 End building causeway.
28+93 Start stone or PT crib steps.
Note: Consider relocation upslope to existing social trail from 29+93-31+80. Decision for reroute by FS COR
29+38 End crib steps.
29+58 Remove NF water bar. Install rock armor GD-right
29+58 Move tread upslope- move out of drainage.
Moore Cove Trail Assessment Log Page 12
30+21 End move tread upslope.
Install armor crossing.
30+28 Start turnpike or puncheon.
Incised tread-trail is in creekbed.
31+93 Start bridge ,repair handrail
(photo looking backwards)
32+12 End bridge-riprap/armor left corner of bridge.
Moore Cove Trail Assessment Log Page 13
32+63 Start rock or PT crib step
32+82 End rock or PT crib step.
32+89 NF water bar, install GD-left.
33+35 Install GD-left.
33+50 Move trail upslope.
33+90 GD-left move tread upslope close social trail left.
34+59 Crib step over root. Move tread upslope.
34+72 End crib steps.
34+73 Install stone or PT retaining wall 3’ height remove existing timber wall.
35+13 End upslope stone or PT wall.
Moore Cove Trail Assessment Log Page 14
35+13 Remove two 24” dead hemlocks.
34+88- 35+13
End of trail at platform, viewing area. Install stone or PT timber crib to stabilize platform, install handrail.
Remove large log at platform.
Note: to be approved by COR .
File details come from the government source that posted it. Updated .