s100051_01_Appendix_A1_Service_amend_01.pdf

Amendment No. 01, dated 7/23/2010 AG-03R6-S-10-0051 South Fork Fish Creek Stewardship IRSC / Lolo NF Appendix A-1, Page 1 of 4

APPENDIX A-1

STEWARDSHIP CONTRACT

FUELS TREATMENT and OTHER SERVICES

Unless otherwise agreed to in writing by the Contracting Officer, the Contractor shall perform services according to the following requirements:

1. Fuels Reduction (Tractor): Dead lodgepole pine non-saw product removal 7.0 +” diameter at breast height – tractor harvest system (SCHEDULE OF ITEMS B.1.1)

(a) This specification applies to the following Mandatory and Optional Units:

Units Acres Mandatory 26T, 2T 22 Optional

(b) The Contractor shall perform fuels reduction and product removal services including, but not limited to felling, yarding, processing, hauling, erosion control and slash treatment services.

(c) Product removal will conform to the utilization standards outlined in Appendix B, Section A2.

(d) The Contractor shall perform product removal services in accordance with all of the requirements of this contract, including, but not limited to those outlined in this Appendix A, and the requirements identified in Appendix B.

2. Fuels Reduction (Skyline): Dead lodgepole pine non-saw product removal 7.0+” diameter at breast height – skyline harvest system (SCHEDULE OF ITEMS B.1.2)

Mandatory 2S, 3S 38 services.

(c) Product removal will conform to the utilization standards outlined in Appendix B, Section A2.

(d) The Contractor shall perform fuels reduction and product removal services in accordance with all of the requirements of this contract, including, but not limited to those outlined in this Appendix A, and the requirements identified in Appendix B.

Appendix A-1, Page 2 of 4

3. Fuels Reduction (Tractor): Live lodgepole pine non-saw product removal 5.0 to 5.9”;

Dead lodgepole pine non-saw diameter at breast height 5+” – tractor harvest system

(SCHEDULE OF ITEMS B.1.3)

Mandatory 7 16 services.

(c) Product removal will conform to the utilization standards outlined in Appendix B, Section A2.

(d) The Contractor shall perform fuels reduction and product removal services in accordance

4. Fuels Reduction (Skyline): Live Douglas-fir non-saw product removal 6.0-6.9” diameter at breast height – skyline harvest system (SCHEDULE OF ITEMS B.1.4)

Mandatory 26S,14 221 services.

(c) Product removal will conform to the utilization standards outlined in Appendix B, Section A2.

(d) The Contractor shall perform fuels reduction and product removal services in accordance

5. Fuels Reduction (Tractor): Live Douglas-fir non-saw product removal 6.0-6.9” diameter at breast height – tractor harvest system (SCHEDULE OF ITEMS B.1.5)

Mandatory 26T 14

Appendix A-1, Page 3 of 4 services.

(c) Product removal will conform to the utilization standards outlined in Appendix B, Section A2.

(d) The Contractor shall perform fuels reduction and product removal services in accordance

6. Fuels Reduction (Tractor): Removal of down and dead unmerchantable material – tractor harvest system (SCHEDULE OF ITEMS B.1.6)

Mandatory 2T 8

(b) Product removal will conform to the following standards:

Species

Estimated Ton/ac

Diameter inside bark at large end

(inches)

Minimum Pieces per unit

Piece-length (feet) at small end

% sound

ALL

5.0

50%

(c) Material will be yarded to the designated landing and piled as per Appendix B, K-G.7#.

(d) The Contractor shall perform product removal services including, but not limited to yarding, processing, erosion control and slash treatment services.

(e) The Contractor shall perform fuels reduction and product removal services in accordance

7. Fuels Reduction (Skyline): Removal of down and dead unmerchantable material – skyline harvest system (SCHEDULE OF ITEMS B.1.7)

Mandatory Optional 2S 14

Appendix A-1, Page 4 of 4

(b) Product removal will conform to the following standards:

Species

Estimated Ton/ac at large end

Pieces per unit

Piece-length (feet) at small end

% sound

ALL

5.0

50%

(c) Material will be yarded to the designated landing and piled as per Appendix B, K-G.7#.

(d) The Contractor shall perform product removal services including, but not limited to yarding, processing, erosion control and slash treatment services.

(e) The Contractor shall perform fuels reduction and product removal services in accordance

8. Quality assurance surveillance plan / performance requirements summary

APPENDIX A-1

QASP / Performance requirements summary (PRS)

The following describes the major items in the contract with the incentives and deductions for the work described. Items below are included here as requirements.

Work Statement Performance Standard

Government Method of

Assessment Incentive/Deduction

Non-saw product removal Meets 100% Removal Standards

Appendix B Requirements

Final Fuels Condition

COR or Inspector conduct periodic monitoring and visual inspection.

• Rework is required if Contractor fails to meet standard.

• The Contractor’s quality will be reflected in the performance assessment either positive or negative.

• If the Contractor fails to meet standards, work may be suspended or put in Default for failure to take corrective action immediately. Result in adverse performance assessment.

Yarding of unmerchantable material

Meets 100% Removal Standards

COR or Inspector conduct periodic monitoring and visual inspection

• Rework is required if Contractor fails to meet standard.

• The Contractor’s quality will be reflected in the performance assessment either positive or negative.

• If the Contractor fails to meet standards, work may be suspended or put in Default for failure to take corrective action immediately. Result in adverse performance assessment.