A4 Capability Matrix (11 Dec 20).xlsx
XLSX spreadsheet 12 KB Posted
- Solicitation number
- FA2523-21-Q-0001
About this file
This solicitation seeks proposals to procure and deliver two sets of new floating fuel hoses with associated reel assemblies to the Port of Fredericia, Denmark. Offerors must provide all materials, labor, equipment, and supervision necessary to deliver, receive, and inspect the hose and reel assemblies. Proposals are due by December 30, 2020 and the Department of the Air Force Space Command aims to award a contract to have the equipment delivered no later than May 15, 2021. Offerors must coordinate factory acceptance testing with government representatives and have the hoses assembled onto reels prior to shipping from the manufacturer's facility.
View the file
Other files
Show all 22
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Fuel Hose System, Thule AB | Vendor Name: | |||
| Product Name: | ||||
| SOW Para. | Minimum Requirement | Justification for Meeting Requirements: Narrative on how vendor meets minimum requirement (Vendor must provide narrative to get credit - can attach or reference narrative) | Supporting Information Location: Indicate where in the vendors offer the minimum requirement | |
| Fuel Oil Reeling System | 2.1 Spec.1 | • 8 inch x 600 foot (8” x 600’) Long length floater hose. |
o Electrically: Discontinuous. ANSI 150 WN RF. Textile Long Length Hose.
o Soft wall. Inside dia. 205 mm, outside dia. 233 mm, weight in air empty 12.3kg/m, weight in air full of water 46.1kg/m.
o Working pressure of 250 psi or higher, test pressure 450 psi, burst pressure 1200 psi.
o Aromatic resistance up to 50%.
o Flow velocity up to 21 m/s.
o Each assembly includes all necessary fittings, 8" towing slit clamps, 8" couplings, ball valves, 8" towing clamps, 8" seal O-rings, 8" seal back-up rings, 8" camlock adaptors w/valves and 8" towing clamp handling harness.
Reel Drum and Drive Frame 2.1 Spec.1 o Refueling hose drum & support frame capable of accommodating 8-inch x 600’ bunker hose o Hydraulic motor drive unit c/w failsafe brake o Electro/hydraulic power unit (7.5 kW - 10 HP) o Direct-on-line electric starter unit (7.5 kW - 10 HP) o Electrical Supply Main 208 volts 3 phase 60 Hz o Hydraulic Piping: 316L Stainless Steel – Metric o Hydraulic Fittings 316L Stainless Steel – Double Ferrule – Metric
| Hydraulic Power Unit (HPU) | 2.1 Spec.1 | • 208 volt, 3-phase, 60 Hz Hydraulic Power Unit (HPU) should be integrated onto reel with a 10 HP (7.5 kW) capacity electric motor |
| Documentation | 2.1 Spec.1 | • Standard Documentation Pack, Manufacturing Data Book and Factory Pressure Testing Certifications |
| Freight and Delivery | 2.1 Spec. 2 | 2. Freight costs must be included to Port of Fredericia, Denmark. All materials must be delivered as one shipment NLT 15 MAY 2021. |
| Factory Acceptance Testing | 2.1 Spec. 2 | The hoses must be assembled onto the associated reels prior to shipping from the manufacturer’s facility to the Port of Fredericia, Denmark. Proper coordination and advance communication must be provided with the government representatives to allow for Factory Acceptance Testing (FAT) and to witness the final assembly/spooling of the hoses onto the reels before they are shipped. Government points of contact will be provided upon contract award. FAT to include as a minimum: |
• Reel system light run functional test
• Hydraulic system, hydraulic pressure tested - 1.5 x Max Working Pressure
• Hydraulic system cleaned & flushed to ISO 17/15/12
• Hydraulic system sealed/capped after flushing
• Hose Pressure testing at 1.5 x max working pressure
File details come from the government source that posted it. Updated .