A005.doc

DOC document 278 KB Posted

Attached to
Support Equipment Test & Evaluation Contractor Support Services Federal contract opportunity
Solicitation number
N00421-20-R-0121
Issued by
Department of the Navy Naval Air Systems Command Naval Air Warfare Center

About this file

This document contains a Contract Data Requirements List (CDRL) and related federal contract opportunity. The CDRL outlines reporting requirements for an incumbent contractor providing Support Equipment Test & Evaluation services to the Naval Air Systems Command Naval Air Warfare Center. Services include engineering, technical, administrative, and program management support. Reports must include progress updates, cost data, invoices, staffing plans, and expenditure graphs. The federal contract opportunity is a solicitation for follow-on support services with the same requirements. It is a cost-plus-fixed-fee indefinite delivery/indefinite quantity contract for 5 years, with a maximum value of $41.5 million. The work will be performed primarily in Maryland, New Jersey, California, and Virginia. The incumbent is Eagle Systems, Inc. under contract N00178-14-D-7700-M801.

View the file

Other files for this federal contract opportunity

Other files attached to Support Equipment Test & Evaluation Contractor Support Services, newest first.
File Type Posted
Amendment 0001.pdf PDF
P9 Wage Determination.pdf PDF
Conformed Amendment 0001.pdf PDF
A006.docx DOCX document
P3 PPIF.pdf PDF
P6 Personnel Resource Matrix.xlsx XLSX spreadsheet
P7 COR Only Excel Template.xlsx XLSX spreadsheet
P6 Personnel Resource Matrix.xlsx XLSX spreadsheet
A003.doc DOC document
A004.doc DOC document
P1 Cost.xls XLS spreadsheet
P3 PPIF.pdf PDF
A002.doc DOC document
N00421-20-R-0121_RFP.docx DOCX document
J1 Org_Conflict_of_Interest.docx DOCX document
J3 CSP_SAC.docx DOCX document
P4 CPAQ.pdf PDF
J5 Data_Item_Transmittal_Acceptance_Rejection_Form.docx DOCX document
A001.doc DOC document
P2 Fully Burdened.xlsx XLSX spreadsheet
P8 COR and Customer Excel Template.xlsx XLSX spreadsheet
J4 DD254.pdf PDF
A006.docx DOCX document
P5 CPAQ Instructions.docx DOCX document
Show all 24

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

CMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222202-2302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract. PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XXXX

B. EXHIBIT

A

C. CATEGORY

TDP

TM

OTHER XX

_________ (various, see below)

D. SYSTEM/ITEM

SE T&E Branch, AIR 4.8.6.11

E. CONTRACT/PID NO.

N00421-20-R-0121

F. CONTRACTOR

TBD

1. DATA ITEM NO.

A005

2. 2TITLE OF DATA ITEM

Incurred Cost and Progress Reporting for Services

3. SUBTITLE

Invoice Support Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81864A

5. CONTRACT REFERENCE

5252.232-9529 and SOW Para: 3.1.3.5

6. REQUIRING OFFICE

NAWCAD 4.8.6.11

7. DD 250 REQ

9. DIST STATEMENT REQUIRED
10. Frequency

12. DATE OF FIRST SUBMISSION

14.

DISTRIBUTION

LT

See BLK 16
See BLK 16

b. COPIES

8. APP CODE
E
11. As of Date
13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE

Final

N/A

See BLK 16
See BLK 16
Draft
Reg.
Repro.

16. REMARKS:

Block 4 - Tailored Content Requirements

(DID Requirements Paragraph 1): Reports shall be submitted electronically. Data Tables shall be consistent with contract attachment (X) and submitted in MS Excel format.

(DID Requirements Paragraph 3): The report content shall be in accordance with the references included in Block 5.

Block 9 – Distribution authorized to DoD components only; contractor proprietary information included.

Blocks 10, 12 and 13 – At a minimum, submit jointly with the invoice.

486K00A
0
1
0

15. TOTAL

G. PREPARED BY

NAWCAD-4.8.6.11

H. DATE

I. APPROVED BY

Patrick Weaver, AD-4.8.6.11

J. DATE

_1649513468.pdf

DATA ITEM DESCRIPTION

Title: CONTRACTING OFFICER’S MANAGEMENT REPORT

Number: DI-MGMT-81864A Approval Date: 20170313

AMSC Number: N9774 Limitation: N/A

DTIC Applicable: N/A GIDEP Applicable: N/A

Preparing Activity: SH Project Number: MGMT-2017-019

Applicable Forms: N/A

Use/Relationship: This report indicates the progress of work and the status of the program and of the assigned tasks, reports costs, identifies and informs of existing or potential problem areas.

1. This Data Item Description (DID) contains the format and content preparation instruction for the data product generated by the specific and discrete task requirement delineated in the contract.

2. This DID may be applied in any contract and during any program phase.

Requirements:

1. Format. This report shall be in Contractor’s format.

2. General instructions. The Contracting Officer’s Report shall describe work accomplished in terms of technical accomplishments and expenditure data for each project area/task/technical instruction funded under the contract.

3. Content. The Report shall contain a title page identifying the following:

a. Contractor’s name and address;

b. Name and telephone number of preparer of the report;

c. Contract number;

d. Nomenclature of the system or program;

e. Date of the report;

f. Period covered by the report;

g. The title of the report;

h. Either the serial number of the report or the Contract Data Requirements List (CDRL) sequence number;

i. The security classification;

j. The name of the issuing Government activity

3.1 The report shall also contain the following sections:

3.1.1 Section 1 – Work Summary. A brief summary of all funded tasks/projects/technical instructions under the contract. The summary shall identify Task Order period (Base, Option 1, etc.) and shall include the following:

Source: http://assist.dla.mil -- Downloaded: 2020-04-27T21:24Z Check the source to verify that this is the current version before use.

DI-MGMT-81864A

a. Project name;

b. TI number (if applicable);

c. Funded amount;

d. Expenditures to date;

e. Funding balance.

3.1.1.2 The report shall include tables that demonstrate:

a. Ceiling hours;

b. Funded hours;

c. Current and cumulative hours separately identifying regular hours from UT/TTA hours charged to the labor category for current and completed CLINs;

d. Subtotals for key and non-key categories.

3.1.2 Section 2 – Invoice Information shall identify the following:

3.1.2.1 Direct labor. The report shall identify:

a. Current and cumulative expenditures (both labor hours and dollars) invoiced by Cost Center where charges originated;

b. Totals for current and cumulative invoiced amounts by cost center.

3.1.2.2 Indirects. The report shall identify:

a. Indirect rate being invoiced with applicable Cost Centers as well as current and cumulative dollar amounts by Cost Center;

b. Total current and cumulative indirect costs.

3.1.2.3 Subcontractors/Consultants. The report shall include copies of invoices received for current

“as of” date.

3.1.2.4 Fixed Fee / Target Fee. The report shall specify:

a. Each fee rate applied, together with current and cumulative dollar amounts;

b. The based to which each fee rate was applied.

3.1.2.5 Other Direct Costs. The report shall include:

a. List of expenses by category (airfare, per diem, supplies, etc.);

b. Current and cumulative expenditures for each category.

3.1.2.6 Total Expenditures. The report shall include total expenditures compared to those invoiced for the same period and differences explained.

3.1.2.7 Current CLIN. The report shall identify the current CLIN being performed and its period of performance.

3.1.2.8 The report shall contain the current CLIN modifications and shall be listed by number, date issued and description.

3.1.2.9 The report shall include a table that identifies the following:

a. Technical instructions/funded projects/work areas by number (where applicable);

b. Date issued;

c. Description;

d. Amount funded;

e. Total expenditures;

f. Funding balance;

g. Total invoiced to date;

h. Grand total.

3.1.2.10 The report shall include a discussion of the contract-wide spend rates (fully burdened) compared to contract-wide bid rate averages (fully burdened). Any variation of actual-to-bid rate averages greater than 10% shall be addressed.

3.1.2.11 A table of approved personnel identifying labor category, key or non-key, individual's name, employer, location (on-site/off-site).

3.1.3 Section 3 – Detailed Information by Project/Work Area/Technical Instruction. This section shall contain:

a. Description of the progress made against milestones during the reporting period.

Specifically address the value-added tasks performed by the prime contractor when work is performed by a subcontractor; clearly identify the key and non-key personnel performing the tasks described.

b. Identification of problem areas affecting technical, scheduling or costs elements, with background and any recommendations for solutions beyond the scope of the contract.

Specifically, address results, positive or negative, obtained related to previously-identified program areas, with conclusions and recommendations for solutions.

c. Whether the task is on schedule, ahead of schedule, or behind schedule. Discuss what steps are being or will be taken to complete all requirements on time if possible, or provide a proposed revised schedule based on best current estimates if behind schedule.

d. The status of all assigned deliverables, including title, CDRL number, due date, date delivered, Contractor point of contact and description or title of deliverable(s). The report for each contract period shall include a cumulative list of all deliverable items provided.

e. A table of approved personnel identifying labor category, key or non-key, individual's name, employer, fully burdened labor rate, location (on-site/off-site), date resume submitted, date resume approved, and date removed shall be included. If a resume was submitted as a replacement for a Key Person approved at time of award, the name of the individual being replaced shall also be provided.

f. Include current and cumulative expenditures of both hours and dollars. Separately show expenditures by CLIN and SubCLIN (labor and ODC). Identify the amount funded and compute a funding balance. Present the current and cumulative total percentage of ODCs to labor.

g. Include graphs showing cumulative expenditures of both hours and dollars. Line graphs shall show planned cumulative expenditures as well as cumulative funded level(s). Include numerical values for all points graphed; quantities of labor hours shall show rounded to the nearest hour.

h. Include the names of all personnel charging. Organize these data by labor category, fully burdened labor rate (e.g. fee and prime pass-through, where applicable), and show current and cumulative hours charged for each individual. Separately show uncompensated hours/total time accounting (TTA) hours worked (if applicable). Labor categories shall be identified as to whether they are key or non-key categories. Subtotals shall be provided for key and non-key categories as well as total current and cumulative hours. Provide average hourly rates (fully burdened) for each labor category. These data shall include subcontractor/consultant hours in appropriate labor categories.

i. Include spend rates compared to average bid rate averages. Any variation of actual-to-bid rate averages greater than 10% shall be addressed.

j. Identify all items charged. Include description of item, quantity, purpose, vendor, unit price, extended price and disposition.

k. Identify all travel direct-charted during the period, for each:

(1) Destination

(2) Purpose of trip

(3) Number of travelers

(4) Length of trip

(5) Estimated cost of the trip

l. Identify any new subcontractors approved during the reporting period and any proposed subcontractors/consultants for the next reporting period. Their capability set and areas of expertise shall be thoroughly addressed.

m. Record of significant telephone calls and any commitments made by telephone shall be included.

n. Plans and recommendations for activities during the next reporting period;

o. Appendixes for any necessary tables, references, photographs, illustrations, and charts.

End of DI-MGMT-81864A

File details come from the government source that posted it. Updated .