9 technical specif. Workstation L-shape 1.80 m x 1.50 m.pdf
PDF 564 KB Posted
- Attached to
- INL Colombia Furniture for Rural Justices
- Solicitation number
- 191NLE24I0006
About this file
This sources sought notice requests market research and capability information from contractors interested in providing furniture and equipment for rural justice facilities in Colombia. Responses are due by February 28, 2024. The Department of State's Bureau of International Narcotics and Law Enforcement Affairs seeks to improve conditions for communities to access justice and for judges to efficiently adjudicate cases. Contractors should indicate their interest and ability to provide workstations, chairs, filing cabinets, and other items specified in the technical specifications as either a prime contractor, subcontractor, or wholesaler. The notice also requests details on warranty and delivery timelines, three past performance examples, and questions or recommendations to inform a subsequent funding opportunity. The period of performance is forty-five calendar days from award.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SPECIFICATION . NUMBER 9
1.1 Product number Worksta on L-shape 1.80 m x 1.50 m
1.2 Reference image and descrip on
1.3 Minimum specifica ons
1.3.1 Surface
Supply and installation of L-secretarial type workstation of 1.8m x 1.50m x 0.75m high, the first surface will be 1.50m long x 0.60m wide, the second will be 0.90m long x 0.60m wide.
The surfaces will be made of 30 mm high-pressure laminate wood (NEMA standard), veneered at the top in Formica F-8 high-pressure laminate, with F-8 Balance-Backer at the bottom.
All edges must be coated with flat edges thermo cast in high-pressure polymer, firmly and industrially adhered with hot melt glue.
Surfaces must ensure abrasion resistance of 6000 cycles.
Scraps or parts glued or assembled on the inside will not be accepted, this must be a single piece for each surface The high-pressure laminate type wood used must be Moisture Resistant. (RH)
1.3.2 Structure
They will have 3 supports in 16 gauge cold rolled sheet on the sides of the surfaces according to designs to be defined on site, in the lower part plastic levelers.
Total height of the cabinet: 75 cm. to the upper level.
The workstation will have a skirt on the front side and additionally 2 cable grommets of 8 cm in diameter are required.
If welding is necessary, MIG type or similar must be used.
The structure must be insulated from the floor by means of anti-noise levelers, which in turn prevent marks or scratches on the floor and protect the furniture from moisture.
Levelers should have a latch or stud of sufficient length to decrease the risk of loss.
1.3.3 Paint
Absolutely all visible or non-visible (cold rolled) metal parts shall be coated with Epoxy – Polyester powder-bakable coating.
The thickness of the paint will be 70-90 microns.
1.4 Quality regula ons
Nevertheless, the above minimum specifications, the product must comply with the following quality standards as it relates to the product:
NTC 1987: Home furnishings. Tables NTC 1558: Desks and tables. Physical Quality Requirements NTC 5327: Office furniture. Testing for Hall Seating NTC 1440: Office furniture. General considerations regarding the working position: Chair-Desk NEMA-LD3: National Electrical Manufacturers Association- High- Pressure Decorative Laminates.
File details come from the government source that posted it. Updated .