4 technical specif. Desk 1.30 m x 0.60 m.pdf
PDF 546 KB Posted
- Attached to
- INL Colombia Furniture for Rural Justices
- Solicitation number
- 191NLE24I0006
About this file
This sources sought notice and technical specifications document requests proposals for the supply and installation of office furniture for rural justice facilities in Colombia. Key details include the request for desks measuring 1.30m x 0.60m that meet technical specifications for materials, structure, and quality regulations. The furniture must be delivered to various municipalities in Colombia within 45 days of award. A three-year warranty is required along with coordination of customs clearance and tax exemption. Interested parties should respond by February 28, 2024 with company and certification details, past performance examples, and questions. The awarding agency is the Department of State Office of Acquisition Management.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SPECIFICATION . NUMBER 4
1.1 Product number Desk 1.30 m x 0.60 m
1.2 Reference image and descrip on
1. Surface in Formica plated chipboard
2. Side in Formica plated chipboard
3. Front skirt: Agglomerated in Formica veneer.
4. Bristol type anchoring system
5. Levelers
1.3 Minimum specifica ons
1.3.1 Surface
Supply and installation of 1.30 m x 0.60 m desk station The surfaces will be made of 30 mm high-pressure laminate wood (NEMA standard), veneered at the top in Formica F-8 high-pressure laminate, with F-8 Balance-Backer at the bottom.
All edges shall be coated with flat edges thermo cast in high-pressure polymer, firmly and industrially adhered with hot melt glue.
Surfaces shall ensure abrasion resistance of 6000 cycles.
Scraps or parts glued or assembled on the inside will not be accepted, this must be a single piece for each surface The high-pressure laminate type wood used must be Moisture Resistant. (RH)
1.3.2 Structure
The desk station will have a skirt on the front, 0.35 cm high and 30 mm thick, with Formica plated chipboard.
The structure must be insulated from the floor by means of anti-noise levelers, which in turn prevent marks or scratches on the floor and protect the furniture from moisture.
Levelers on both sides, it will also have a reinforcement of 5cm per access face to the module in agglomerate plated in high-pressure
Formica f(8).
Levelers should have a latch or stud of sufficient length to decrease the risk of loss. This will have a bristol-type anchoring system.
The elements connecting the structure and surface must ensure that the whole is consolidated and that it behaves monolithically.
1.4 Quality regula ons
Nevertheless, the above minimum specifications, the product must comply with the following quality standards as it relates to the product:
NTC 1987: Home furnishings. Tables NTC 1558: Desks and tables. Physical Quality Requirements NTC 1440: Office furniture. General considerations regarding the working position: Chair-Desk NEMA-LD3: National Electrical Manufacturers Association- High- Pressure Decorative Laminates
File details come from the government source that posted it. Updated .