GSE_Order.doc

80KSC_________

OF347 Continuation Sheet

Extensible Columns Subsystem (XCS)

This Delivery Order is subject to the terms and conditions and contract clauses of the Basic Contract 80KSC_TBD_. Below are terms and conditions and fill-ins that are specific to this acquisition.

SECTION B – SUPPLIES OR SERVICES AND PRICES/COSTS

B. 4

NFS 1852.216-78 FIRM FIXED PRICE (DEC 88)

The total firm fixed price of this contract is __TBD_

SECTION C – DESCRIPTION/SPECIFICATION/WORK STATEMENT

C. 1

SCOPE OF WORK

Fabricate, test, and delivery of the Extensible Columns Subsystem (XCS). The Contractor shall furnish all labor, equipment, materials, and services to schedule, coordinate, supervise, and provide quality control to fabricate, assemble, mark, test, package, and deliver the Extensible Column Assemblies and ancillary items as defined by this Statement of Work (SOW), associated engineering drawings and documents, and referenced standards, specifications, codes, and publications.

This SOW denotes requirements, terms, and conditions specific for this Delivery Order that are in addition to, modified from, or further clarified from the GSE IDIQ Base Contract terms and conditions. Terms and conditions of the GSE IDIQ Base Contract are applicable to the performance of this Delivery Order.

C. 3

CONTRACT DRAWINGS, MAPS AND SPECIFICATIONS

The work shall conform to the following contract drawings and specifications attached hereto and made a part hereof:

Appendix A

Extensible Column Assembly Drawing List

Appendix B

Extensible Column Spares Drawing List

Appendix C

Compliance Assembly Spring Drawing List

K0000362588-GEN

Extensible Columns Subsystem (XCS) Fabrication Test Requirements Document

K0000124122

Lifting and Handling Layout

K0000123496

Hydraulic System Installation Reference Section 22 – Special Requirements for additional information.

3D CAD Models created in CREO Parametric 2.0 will be made available to the Contractor upon request during the Period of Performance. These models will be for reference purposes only. The contract drawings will take precedence in the event of any discrepancy.

The following specifications are applicable to this Delivery Order:

C.5

PROGRESS REVIEWS

The Contractor shall schedule and conduct two meetings per week throughout the period of performance; one Technical Interchange Meeting to discuss technical issues and one Progress Meeting to discuss overall project status. Meeting minutes and progress review content shall be documented and distributed by Contractor in accordance with Section C.5 of the IDIQ contract from which this Delivery Order is awarded. The Contractor shall provide meeting minutes to attendees two days after each meeting is held.

The Contractor shall be available for additional meetings as required by the Government.

SECTION E - INSPECTION AND ACCEPTANCE

E.2

FAR 52.246-15 CERTIFICATE OF CONFORMANCE (APRIL 1984)

E.3

NFS 1852.246-72 MATERIAL INSPECTION AND RECEIVING REPORT. (AUG 2003)

E.5

QUALITY CONTROL SYSTEM

Paragraph 3:

No more than 15 calendar days after Notice of Award, the Contractor shall provide the Contracting Officer and Quality Assurance Representative (QAR), for approval, a schedule and Inspection Control Point Outline (ICPO) which shows the work sequence(s) to be employed during the performance of this Delivery Order. The Contractor’s schedule/ICPO must indicate what types of Contractor inspections will be performed and where in the contract’s sequence of events they will be accomplished. If applicable, the schedule/ICPO must also indicate the specification(s) (including revisions) and/or other documentation that will be used to perform the indicated inspections. Special inspections, called mandatory inspection points (MIP) for the Contractor to perform, will be designated by the Government during the performance of this contract. Government Source Inspections (GSI) shall be accomplished on this contract prior to product shipment. Evidence of GSI shall be indicated by the Government QAR.

Upon submittal of the ICPO, the Government will identify which inspections/tests/work steps require Government Quality Assurance (GQA) witness. These inspections/tests and/or work steps will be designated as GMIPS. The Contractor shall notify the QAR at least five (5) working days prior to the occurrence of a scheduled, designated GMIPS. Designation of GMIPS does not relieve the Contractor of the obligation to perform all contractually required inspections.

E.6

QUALITY ASSURANCE PLAN

A quality assurance plan, applicable to all Delivery Orders to be issued under the basic contract, shall be prepared in accordance with AS 9100. Within fifteen (15) days from date of task order award, five copies of the plan shall be submitted to the Contracting Officer for review and approval. The approved quality assurance plan will be incorporated by modification into the resultant contract.

E.7

QUALITY ASSURANCE DOCUMENTATION

KDP-P-5042, Engineering Directorate Acceptance Data Package Process Document defines and specifies the minimum ADP requirements. The Contractor shall complete all KDP-F-5042 documents provided by the Government and include them in the ADP as specified in KDP-P-5042. The ADP shall be assembled in the order shown in KDP-F-5042B, ADP Index. Use form KDP-F-5042A, ADP Inventory Checklist, as an aid to assemble the ADP. An electronic and hard copy of the ADP shall be included with the delivery of fabricated items.

E.13.43

GOVERNMENT FURNISHED EQUIPMENT

The hardware listed in Appendix D will be provided to the Contractor as Government - Furnished Equipment (GFE). The Appendix lists the date the hardware will be available for pick-up by the Contractor at Kennedy Space Center, FL. GFE shall be managed in accordance with FAR 52.245-1 and other pertinent terms and conditions of the contract.

PROVISIONS INCLUDED IN DELIVERY ORDER SOLICITATIONS

LISTING OF FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) PROVISIONS INCORPORATED BY REFERENCE

FAR 52.211-6

Brand Name or Equal (AUG 1999)

FAR 52.211-1

Availability of Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29

(AUG 1998)

FAR 52.211-3

Availability of Specifications Not Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions. (JUN 1988)

FAR 52.225-2

BUY AMERICAN CERTIFICATE (JUN 2003)