8-File P-PERFORMANCE OF SPECIALTY TRADE WORK.pdf

PDF 145 KB Posted

Attached to
ALTERATIONS AND ADDITIONS STAFFORD VOLUNTEER FIRE COMPANY NAUTILUS DRIVE - PHASE 2 FOR THE TOWNSHIP OF STAFFORD
Solicitation number
BID 2026-18
Issued by
Ocean County, New Jersey

About this file

This is an Instructions to Bidders document for the Township of Stafford, New Jersey, regarding the performance of specialty trade work for alterations and additions to the Stafford Volunteer Fire Company facility at Nautilus Drive—Phase 2. The project encompasses construction of a 2,000 square foot West Garage Bay with masonry and steel framing, demolition of an existing 600 square foot center building, and construction of a new 900 square foot two-story masonry and steel structure connecting two existing bay buildings. The scope of work includes structural modifications with new roof trusses and fiberglass asphalt shingle roofing, foundation reinforcement, installation of new HVAC units, complete electrical upgrades and reconfiguration, new plumbing systems for sanitary facilities, modifications to drainage systems, new mechanical systems, and site improvements as specified in the contract drawings. Bids are due August 19, 2026. The document requires general contractors to provide detailed information regarding their qualifications and those of their subcontractors or in-house personnel to perform work in four specialty trade categories: plumbing and gas fitting, steam power plants and heating/ventilating apparatus, electrical work, and structural steel and ornamental iron work.

The instructions mandate that general contractors complete all applicable sections of the specialty trade form, either identifying specific subcontractors with required qualifications and license numbers, or designating work to be performed in-house and providing employee names and license numbers. Contractors must submit the completed form with their bid submission. If the contract does not involve any of the four specialty trade categories listed, contractors are instructed to insert "NONE" in the appropriate spaces. No specific contract value, pricing terms, set-asides, pre-bid meeting date, or award date is provided in this instructional document.

View the file

Other files

File Type Posted
15-File N- Mand. Aff Act-Exhibit B Language.pdf PDF
25-FILE B - BID DOCUMENT SUBMISSION CHECKLIST Redacted.pdf PDF
4-File C-NJ BRC REQUEST.pdf PDF
13-File T-Federal Debarment.pdf PDF
20-File X - Wage Rates.pdf PDF
12-File Q-IDENTIFICATION OF SUBCONTRACTORS-Construction.pdf PDF
21-FILE Z1- Contract Drawings.pdf PDF
30-File G-Consent of Surety.pdf PDF
11-File U- Corporate Principal.pdf PDF
27-File V- Bid Proposal.pdf PDF
6-File I-STATEMENT OF STOCKHOLDER OWNER.pdf PDF
5-File H- NON COLLUSION STATEMENT.pdf PDF
19-File W -General Conditions - AIA A201 - 2026-045- Nautilus Fire P2.pdf PDF
7-FILE L-CERTIFICATE OF EQUIPMENT.pdf PDF
18-File 2-Instruct to Bidders Elect..pdf PDF
26-File 3 - Table of Contents.pdf PDF
28-FILE Y - SPECIAL CONDITIONS.pdf PDF
14-File S-STATE ON NJ DEBAR.pdf PDF
17-File E - Acknowledge of Addenda PDF.pdf PDF
3-File K-CERTIFICATE OF INSURANCE.pdf PDF
9-File M-Affirmative Action Compliance Notice-Construction.pdf PDF
24-File A- Project Identification.pdf PDF
31-File F-Bid Guarantee.pdf PDF
2-File D-Certificate of Public Works Contractor Registration.pdf PDF
29-FILE 1 - Notice To Bidders - Bid 2026-018-TWP Nautilus Fire - P2.pdf PDF
10-File R-BIDDERS DATA SHEET.pdf PDF
16-File O-Americans With Dis. 1990.pdf PDF
1-File J-CERTIFICATION OF EXPERIENCE.pdf PDF
22-File Z2 - Technical Section Div. 1 thru Div. 28.pdf PDF
23-FILE Z0 - SUPPLEMENTARY CONDITIONS.pdf PDF
Show all 30

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

INSTRUCTIONS TO BIDDERS – PERFORMANCE OF SPECIALTY TRADE WORK

In the event a general contractor will be required to furnish (1) plumbing and gas fitting and kindred work; (2) steam power plants, steam and hot water heating and ventilating apparatus and kindred work; (3) electrical work; and/or (4) structural steel and ornamental iron work, the general contractor must complete all of the sections on the following form in order to provide the required information demonstrating that either its subcontractors, its own employees or the bidder himself possess the necessary or required qualifications to perform work in each appropriate specialty trade category applicable to the contract. If the contract does not involve any of the specialty trade categories, insert the word “NONE” in each appropriate space provided. The completed form must be submitted with the general contractor’s bid.

A general contractor that intends to utilize a specific subcontractor to perform work in one or more of the specialty trade categories set forth on the following form shall provide the required information with regard to that subcontractor in the appropriate spaces for each specialty trade category applicable to the contract.

A general contractor that intends to perform work in one or more of the specialty trade categories set forth on the following form through the use of its own employees or the general contractor himself rather than through utilization of a subcontractor shall write the word “In-House” next to each applicable category and then insert the name, and the license number where required, of each such employee of the general contractor or the general contractor himself in the appropriate spaces for each specialty trade category applicable to the contract.

File details come from the government source that posted it. Updated .