SOW Enclosure 2 Installation ICD - MH-60T FTDs_Amendment 0006.pdf
PDF 72 KB Posted
- Solicitation number
- 70Z02326R93150001
About this file
This is an Installation Facility Interface Control Document (ICD) Amendment 0006 establishing requirements for the awarded vendor to conduct a comprehensive site visit at the USCG Aviation Training Center (ATC) in Mobile, Alabama to gather technical specifications for installation of MH-60T training devices.
The Contractor is responsible for surveying, verifying, and documenting facility interface information across five primary categories: Physical Layout (architectural layouts, floor measurements, ceiling heights, access pathway dimensions); Structural Specifications (floor loading capacity in pounds per square foot, under-floor pits, trenches, foundation characteristics); Electrical Power (location, type, voltage, phase, amperage of all electrical connections, and UPS system availability); HVAC System (total cooling capacity in BTUs/tons, supply/return duct locations, temperature and humidity control capabilities); and Network Connectivity (available network data ports and coordination with onsite personnel for integration into USCG maintenance and training networks). The collected data will enable site-specific installation design and successful delivery, installation, and integration of the Flight Training Device (FTD) and Hoist Mission Training System Simulator (HMTS).
View the file
Other files
Show all 40
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ENCLOSURE 2: Installation Facility Interface Control Document
(ICD)
Amendment 0006
1.0 PURPOSE AND SCOPE
This Interface Control Document (ICD) establishes the requirement for the awarded vendor to conduct a comprehensive site visit to gather the authoritative technical details and specifications for the installation of the MH-60T training devices at the USCG Aviation Training Center (ATC) in Mobile, Alabama. The purpose of this process is to ensure the Contractor is responsible for collecting all necessary facility interface information required to successfully plan for the delivery, installation, and integration of the Flight Training Device (FTD) and the Hoist Mission Training System Simulator (HMTS).
2.0 SITE VISIT AND DATA COLLECTION REQUIREMENTS:
The Contractor shall conduct a site visit to gather all information needed to complete its site-specific installation design. During the visit, the Contractor shall be responsible for surveying, verifying, and documenting the following key details for each installation area:
Category Data to be Collected by Vendor
Physical Layout Assess and document detailed architectural layouts, precise floor space measurements, ceiling heights (noting all obstructions), and the dimensions of all access pathways (doorways, hallways, elevators).
Structural Specifications
Verify floor loading capacity (in pounds per square foot) and document any under-floor pits, trenches, or unique foundation characteristics relevant to the motion system.
Electrical Power Identify and document the location, type, voltage, phase, and amperage of all available electrical connections. Assess the need and availability of uninterruptible power supply (UPS) systems.
HVAC System Evaluate the total cooling capacity (BTUs/tons) of the facility's HVAC system, map the location of supply/return ducts, and record existing temperature and humidity control capabilities.
Network Connectivity Locate and document available network data ports and coordinate with on-site personnel to understand the infrastructure for integration into USCG maintenance and training networks.
| ENCLOSURE 2: Installation Facility Interface Control Document (ICD) |
| 1.0 PURPOSE AND SCOPE |
File details come from the government source that posted it. Updated .