6-2026-05-08 Quote 52603772001 J-NHX4000G4 DVS Richard J. Daley AVI college Campuses Factory Order.pdf

DMG MORI Chicago

Chicago TC 2400 Huntington Blvd. Hoffman Estates IL 60192

Phone:+1-847-593-5400 Fax: +1-847-593-5433

URL: http://www.dmgmori.com

Richard J. Daley

AVI college Campuses 2800 S Western

Chicago, Illinois 60608

05/08/2026

Quotation No. 52603772001

In reference to our recent discussions regarding your interest in DMG MORI product, we are pleased to provide in the subsequent pages your quote for the following machine:

Product Description : NHX 4000 4th Generation Please refer to the following pages

Serial Number : TBD

Payment terms : 30% down-payment due at the time of signed SOC/PO, 60% due N10 upon on the earlier of (i) shipment date or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI, 10% due earlier of (i) installation date or (ii) 30 days after shipment. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price.

Incoterms : CIP (INCOTERM 2020) Incoterms location : Customer's Lot

Delivery : Expected delivery TBD, after down payment has been received and subject to timely deliveries of DMG MORI Suppliers Valid to : 05/22/2026 Notes : Machine freight included. Customer responsible for rigging costs.

We trust that this information meets your project requirements. Please contact us should you have any further questions regarding the information presented in the following quote.

Yours Sincerely, DMG MORI Chicago

Quotation for

Richard J. Daley AVI college Campuses

NHX 4000 4th Generation

Highlights

- High-performance 20,000min-1 spindle with 67Hp at the world's highest level to ensure overwhelming cutting capability and speed

- SmartSCALE with super-high accuracy and outstanding reliability on all axes as standard

- 70m/min rapids, up to 1.2Gs of acceleration for a 2.2 second chip-to-chip time

- Zero Sludge Coolant Tank as standard to drastically improve chip disposal performance

- In-machine measuring system (spindle) and Tool breakage detection (Magazine) as standard

- New operation panel with integrated touch panel and hardware buttons

Quote number: 52603772001

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 3 / 32 Price status: 05/08/2026

* further description see attachment

Investment summary

Machine and Options

Basic Machine

NHX 4000 <4th Generation> J-A02240 1 296,000.00 USD

Control CELOS X - ERGOline X (MAPPS) J-013093 1 0.00 USD Fanuc_F31iB_Plus with CELOS X J-023211 1 0.00 USD

Spindle

Standard spindle 20,000 min-1, 50/30 kW (FANUC) J-026534 1 0.00 USD

Options for Spindle Spindle Taper HSK-A63 J-026551 1 0.00 USD Preparation for Center Through-spindle coolant system J-026361 1 0.00 USD

Table

Full 4th axis rotary table (STD) J-019008 1 0.00 USD

Options for Table Specification of Pallet : inch J-017088 1 0.00 USD Auto-Coupler Hydraulic Fixture Interface 6x2 ports

(hydraulic 2 circuits + workpiece seating detection 2 lines)

J-027435 1 18,900.00 USD

Pressure setting for Hydraulic Fixture Interface: 7MPa

(STD)

J-019081 1 0.00 USD

Tool Magazine

Tool storage capacity 60 tools (STD) J-019095 1 0.00 USD Magazine Operation Panel (Standard) J-014068 1 0.00 USD

Coolant supply / Chip removal

Usable Coolant Type: Water-Soluble Coolant J-G00428 1 0.00 USD Coolant type detection system J-028123 1 0.00 USD Chip conveyor outside machine (Rear discharge, scraper type, SUS drum filter) (STD)

J-026549 1 0.00 USD

Through-Spindle Coolant System (1.5 MPa, Constant Pressure) (Mount on Coolant Tank Type) (STD)

J-019027 1 0.00 USD

Coolant chiller J-026327 1 13,550.00 USD Coolant Level sensor (upper limit, lower limit forecast and lower limit detection)

J-026553 1 0.00 USD

Mist collector zeroFOG #1 (Built-in)(SK-OP) J-056040 1 9,200.00 USD Zero Sludge COOLANT pro (Vertical high capacity tank) J-027434 1 15,000.00 USD

Measuring / Monitoring

In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function (STD)

J-019010 1 0.00 USD

Automation

Signal lamp 4 colors (Red, yellow, green, blue) (STD) J-011672 1 0.00 USD

General Options Multi dry filter J-011518 1 0.00 USD Manual pulse generator (separate type) (Standard) J-015539 1 0.00 USD Automatic Residual Pressure Exhaust Valve (Standard) J-026550 1 0.00 USD

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 4 / 32

Voltage of Customer Factory 400 V J-014887 1 0.00 USD Frequency 60 Hz J-G00961 1 0.00 USD Setting Unit inch J-004472 1 0.00 USD

Technology Cycle

Motor driven coolant nozzle J-027433 1 3,000.00 USD MPC (Machine Protection Control) J-015572 1 8,100.00 USD Measuring Pro J-056140 1 0.00 USD

Options for Control

Tool offsets 400 sets in total J-022006 1 0.00 USD

Options for MAPPS / SIEMENS / CELOS Control* IoTconnector CL J-027394 1 0.00 USD

Screen Text Language

Screen display English J-000080 1 0.00 USD

Price machine and options 363,750.00 USD

Services

Special constructions services DMG MORI Precision Protection Program SK001 1 19,360.00 USD LOGISTICS: JK Hackl, Machine Freight-Out Davis, CA to Chicago, IL

SK002 1 10,120.00 USD

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 USD DMG MORI Connect Z-COST06 1 1,000.00 USD EG1: Standard Machine Training Z-COST07 1 0.00 USD

Price services 30,480.00 USD

Price machine and options 363,750.00 USD Discount machine and options (11.30 %) -41,104.00 USD Price services 30,480.00 USD

Total price 353,126.00 USD

Quotation note

Tariff NA USD

The referenced in this Quotation or Order is an estimate only, based on duty and tariff rates in effect as of the date of the Quotation or Order. Duty and tariff rates are subject to change and may be assessed, increased, decreased, or modified by governmental authorities at any time. Customer agrees to be responsible for the actual amount of tariffs, duties, or similar governmental charges applicable at the time of importation of the machine, regardless of the estimated Tariff Surcharge shown. The final Tariff Surcharge will be determined based on the actual amount assessed at the time of import and will be invoiced with the final machine payment. Any difference between the estimated Tariff Surcharge and the actual assessed amount will be reflected in the final invoice. In the event tariff rates are reduced prior to importation, DMG MORI will pass through any resulting reduction in the actual Tariff Surcharge reflected on the final invoice.

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 5 / 32

Total Price (with Tariff) NA USD

Precision Protection Program

DMG MORI wants to ensure you have complete coverage for your investment.

Our industry unique Precision Protection Program can protect you against unexpected service and parts costs resulting from a breakdown or collision, arising from operator error.

Trust in us to provide you with the latest technology and superior coverage to protect your business and valued investment!

What is covered?

+ DMG MORI machinery and DMQP peripherals + Cost to repair or replace equipment damaged by a covered breakdown, including parts and labor, subject to a $1,000 deductible per claim

+ Includes coverage for the repair costs arising from operator error, including parts and labor, subject to a $1,000 deductible per claim

What is the coverage limit?

+ The Precision Protection limit is the purchase price of the equipment + Coverage is effective for a 5-year term from the start of installation

What is the cost?

+ 6% of the purchase price of the machine.

• Please note: The machine must be maintained, serviced & repaired in accordance with DMG MORI’s recommended guidelines, using only DMG MORI approved service engineers & parts

DMG MORI Connect

Streamline your production process while maximizing output and machine lifecycle.

2 years of service included during standard machine warranty.

DMG MORI Messenger Cloud

• Real time monitoring and history analysis platform

• Convenient web access from PCs and mobile devices

• Simple data exports for in-depth evaluation and reporting

DMG MORI NETservice

• Remote diagnosis supported by DMG MORI service experts

• Immediate and direct support minimizes downtime and service costs

• Secure encrypted connection

YouTube video

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 6 / 32

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 7 / 32

DMG MORI Manufacturing USA

NHX 4000 4th Generation

Machine and Options USD USD

Basic Machine

NHX 4000 <4th Generation> J-A02240* 1 296,000.00

Control

CELOS X - ERGOline X (MAPPS) It is a machine operation panel with 21.3-inch multi touch screen, which realizes comfortable operability. It documents, visualizes and centrally manages the order, process and machine data, allowing the networking with CAD/CAM and also the function extension using applications. The user-friendly, highly-productive MAPPS system is installed.

ERGOline X : Covered by a 5-year warranty service

J-013093 1 0.00

Fanuc_F31iB_Plus with CELOS X J-023211* 1 0.00

Standard spindle 20,000 min-1, 50/30 kW

Standard spindle speedMASTER® Spindle speed: 35 - 20,000 min-1 Output: 50/30 kW (66.66/40 HP) (25%ED/cont) Torque: 221/86.8 Nm (163/64.02 ft·lbf) (10%ED/cont) MASTER series spindle: Covered by a 3-year warranty service

J-026534 1 0.00

Options for Spindle

Spindle Taper HSK-A63

This specification uses the HSK-A63 tool holder.

J-026551 1 0.00

Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool.

The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life.

*Coolant pump is not included.

J-026361 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 8 / 32

Table

Full Rotary B-Axis Specifications (Standard

Specification) Minimum pallet indexing angle is 0.001 °. It is applicable to the B-axis index machining and simultaneous 4-axis machining. The High torque DD (direct drive) motor enables high-speed and high-precision indexing without maintenance.

(Specification) Min. indexing angle: 0.001° Drive system: Direct drive motor Clamping system: Hydraulic (Disk Brake) Max. speed: 100 min-1

J-019008 1 0.00

Options for Table

Specification of Pallet : inch J-017088 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 9 / 32

Auto-Coupler (With Pallets) 2 Hydraulic Circuits + 2 Workpiece Seating Detection Circuits The auto-coupler is adopted to supply the two hydraulic circuits and two seating detection ports for workpiece fixtures. The clamping/unclamping is made using the pushbuttons on the setup station, or can be made automatically with the program commands.

(Setup Station Side) Two hydraulic circuits for the clamping/unclamping Two air ports for the workpiece seating detection (Machine Side) Hydraulic pressure is supplied only to the port for sustained clamping. The supply is branched into two ports in one circuit. The seating detection and unclamping are not possible in the machine.

During pallet change, the hydraulic pressure is maintained by check valves in the auto-couplers.

Fixture hydraulic pressure: Max. 7 MPa (1,015 psi).

*This specification does not include the automatic indexing setup station and the automatic door (setup station side).

Caution) Be careful when equipping the machine with pallets of already-existing machines. When the existing machines are not the auto-coupler specification ones, the pallets must not be shared.

【Safety Notes】

Even when the supply of hydraulic pressure is cut off, the pressure remains inside the fixture circuit, meaning the fixture keeps clamping or unclamping the workpiece. However, when the door is left open for a long time, the pressure inside the circuit will gradually decrease, potentially leading to clamping errors or falling workpieces. Accordingly, when the door is left open for a long time, the operator should either remove the workpiece from the fixture, or take a measure to prevent the workpiece from falling.

We urge that operators be educated and trained regarding this risk and the procedure for avoiding it.

【Fixture Notes】

Even if the supply of operating pressure is stopped, the check valve continues to function, so pressure remains in the circuit and the jig’s clamp or unclamp state is maintained for a certain period of time.

However, if a leak of hydraulic oil occurs inside the jig, the workpiece clamp or unclamp state may become unstable.

As a result, during workpiece transfer by the robot, there is a risk that the robot arm and the

J-027435 1 18,900.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 10 / 32 workpiece may interfere with the jig, potentially causing damage to the jig. Please consider this risk when planning the manufacture and procurement of the fixture.

*Since July 2021st, I have been revising the specifications from a safety perspective. As part of this change, when the setup station door or the safety fence is opened, the supply of operating pressure to the fixture is stopped. When a jig that was used on a machine with the old specification is to be used on a new machine, please review the impact of this specification change on the fixture.

Pressure Setting for Auto-Coupler Specification: 7 MPa (1,015 psi) The hydraulic pressure setting for fixture is 7 MPa (1,015 psi).

*If pressure over 7MPa or less than 4MPa is required, please order it as a special specification.

J-019081 1 0.00

Tool Magazine

Tool Storage Capacity 60 Tools (Standard)

Ring-type magazine Tool capacity: 60 tools (including one tool mounted in the spindle) Technical random address type Max. tool diameter:

- With adjacent tools: Φ70 mm (dia.2.76 inch.)

- Without adjacent tools: Φ170 mm (dia.6.69 inch.)

Max. tool length: 450 mm (17.72 inch.)

(NHX4000)

550 mm (21.65 inch.) (NHX5000) Max. tool mass: 12 kg (26.4 lb.)

Max. tool moment (from gage line): 7.84 Nm (5.78 ft·lbf) *Please refer to the separate tool restriction diagram for other restrictions.

J-019095 1 0.00

Magazine operation panel Possible to check of the tool information and call at the tool setup position.

This panel also provide filter function for skip tool and life expired tool. (*1) 7-inch touch panel enables intuitive operation.

No more need to move to operation panel when tool setup.

<Tool information> Registration / display of tool number, tool life, and tool offset Display of pot number, tool name, tool image *1 Not available for Siemens control unit; can be checked in the ERGOline X-Panel.

J-014068 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 11 / 32

Coolant supply / Chip removal

Applicable Coolant Type: Water-Soluble Coolant If the oil-based coolant is used with the water-soluble coolant specification, it may cause poor accuracy, machine troubles or fire. It is necessary to select the oil-based coolant specification for using the oil-based coolant.

J-G00428 1 0.00

Coolant type detection system For machines with the "water-soluble coolant specification" selected, the coolant type detection sensor is installed on top of the coolant tank to automatically check whether the coolant being used is water-soluble.

The check is performed each time the operation preparation is started. If oil-based coolant is detected, an interlock will disable "cycle start," "spindle rotation," and "movement of all axes."

As the interlock cannot be reset while oil-based coolant is detected, use of the machine will be significantly restricted until the coolant is switched to water-soluble coolant.

J-028123 1 0.00

External Chip Conveyor (Rear Discharge, Drum Filter Type) (Standard Specification) The scraper type chip conveyor efficiently discharges chips in the machine into the container (order separately) at the rear of the machine. The drum filter rotates during operation to filter coolant, so that the clarified coolant returns to the tank.

(The spray nozzles are also provided to clean the drum filter.) It is equipped with the overload detection function is provided to detect the overload on the conveyor.

Also, the conveyor rotation direction can be reversed by pressing the reverse button.

*Please select the oil-based coolant specification when using oil-based coolant.

*Please consult DMG MORI when the chip length exceeds 70 mm (2.76 inch.).

J-026549 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 12 / 32

Through-Spindle Coolant System (1.5 MPa (217.5 psi), Constant Pressure) (Mount on Coolant Tank Type) (STD) Supplies high-pressure coolant to the tool tip from the through hole in the spindle and tool. Effective for removing chips, cooling a machining point and prolonging a tool life. The high-pressure coolant command is issued by the M code or by pushing the button on the operation panel. The high precision cyclone filter (Filster made by Industria) is installed, and the filtered coolant is supplied to the spindle via the secondary clean tank in the coolant tank by using the high pressure coolant pump. The coolant filtered by the cyclone filter overflows and returns to the coolant tank.

Max. discharge pressure: 1.5 MPa (217.5 psi) *When using the high-pressure coolant system, the machining accuracy may be influenced by a rise in the coolant temperature. Select the coolant chiller and mist collector to reduce the influence on the machining accuracy.

J-019027 1 0.00

Coolant Chiller The coolant chiller cools coolant in the coolant tank according to a rise in the machine temperature. Controlling the coolant temperature suppresses the rise in temperature of the workpiece, tool and table and achieves the stable machining accuracy. Be sure to select the coolant chiller when you want to use oil-based coolant.

(Please consult DMG MORI.)

As the high-pressure coolant system generates significant heat, select the coolant chiller when using the high-pressure coolant system.

J-026327 1 13,550.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 13 / 32

Coolant Level sensor (upper limit, lower limit forecast and lower limit detection) It monitors the fluid level in the coolant tank.

(Detecting the upper and lower limits and and lower limit forecast)

Lower limit：Alarm

Upper limit・Lower limit forecast：Display warning message(Please consult us regarding the specifications of the automatic water supply system.)

The alarm processing method when the lower limit is detected by the Coolant Level sensor can be changed on the screen. The details that can be changed are as follows.

<Alarm processing method when the lower limit is detected>

- Feedhold and Spindle stop(Immediate stop)(Initial setting)

- Start lock(1 cycle stop(up to M30)) In addition, when “Feedhold and Spindle stop” is selected as the alarm processing method, the timing can be changed. The details that can be changed are as follows.

<Timing of feedhold and spindle stop>

- Immediate stop(Initial setting)

- Non-cutting stop(Cutting command skip) In addition, when “Non-cutting stop” is selected for the timing of feedhold and spindle stop, the allowable time until the non-cutting stop can be set.

J-026553 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 14 / 32

Mist collector zeroFOG #1 (Built-in) The mist collector collects, coolant mist and oily fumes generated during machining using the pre-filter and final filter.

Final filter is toolless and easy to replace.

When the final filter reaches the replacement time, an alert is displayed on the screen.

For FANUC or MITSUBISHI spec., the mist collector can be started/stopped by M-code command or ON/OFF button on the machine operation panel.

For SIEMENS spec., the mist collector is automatically turned on and off in conjunction with the program. (factory default). The operation mode of the mist collector can be changed on the Custom screen. Refer to the operation manual for details on operation modes and how to change them.

When the total operating time of zeroFOG exceeds 15 minutes, the mist suction is automatically stopped temporarily and the primary filter is cleaned by compressed air for 15 seconds to prevent clogging of the primary filter.

Therefore, when using zeroFOG, an additional pneumatic source flow rate of 400 L/min is required only once every 15 minutes for 15 seconds. After the cleaning operation is completed, the mist suction operation starts again.

* When the machine is painted in a specified color, the resin cover around the outer circumference of the zeroFOG is also painted in the same color. Finishing appearance: Orange peel painting.

The replacement intervals for the filters and the cleaning interval for the demister differ depending on the mist concentration inside the machining chamber.

Filter Replacement Interval

- Water-miscible coolant specification: 1000 hours

- Oil-based coolant specification: 300 to 500 hours (with Final Filter Set for High-concentration Fine Mist (#1: 5462094, #2: 5517065)) Demister Replacement Interval: 1000 hours

J-056040 1 9,200.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 15 / 32

Zero Sludge COOLANT pro (Vertical high capacity tank) This is a vertical coolant tank for thorough collection of sludge and lubricant oil. The capacity allows for even long continuous operation. Oil-water separation is performed by taking advantage of the tank height, and lubricant oil is forcibly sucked in and discharged from the float-type suction port. An LED gauge indicates the remaining coolant level for improved management and maintenance.

J-027434 1 15,000.00

Measuring / Monitoring

In-machine Measuring System (Spindle) Optical

Signal Transmission Type Touch Sensor (Renishaw, OMP60) + Workpiece Setter Function Using the optical touch sensor mounted on the spindle, the workpiece is positioned and the positions of the fixture and workpiece are measured. The workpiece coordinate values read by the touch sensor are transmitted using an infrared beam to the NC unit via the receiver installed inside the machine.

Chips and coolant adhering to the receiver can be removed by air blowing. However, please clean the receiver periodically. Dirt on the receiver will cause a reception error alarm.

When processing automated systems or ceramics, etc., please select a radio wave type touch sensor that does not generate a receiving alarm even if it gets dirty.

Also included is the workpiece setting function to measure the machining reference point and center point and modify workpiece coordinate manually, effective when workpiece not suitable for automatic measurement, such as when the workpiece is mounted out of the X-axis or Y-axis.

The touch sensor is housed in the tool magazine and mounted into the spindle by automatic tool change.

J-019010 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 16 / 32

Automation

Signal Lamp 4 Colors (Red, Yellow, Green, Blue)

The machine status is indicated by the LED color.

It is mounted at top front of machine so that it is visible from a distance. The power-saving, maintenance-free LEDs with a viewing angle of 360 degree is adopted. The color specification can be selected from the following two types:

<Type 1>

- Red: Various alarms

- Yellow: Program end (M02/M30)

- Green: Automatic mode operation <Type 2 (Standard)>

- Red: Immediate stop alarm

- Yellow: The cycle start prohibited

- Green: Automatic mode operation

- Blue: Operation requests such as program end (M2/M30) or low coolant warning; Operation Mode 2 *Buzzer function is not included. Please select the "Signal Lamp Buzzer" specification separately.

J-011672 1 0.00

General Options

Multi Dry Filter

It removes moisture and oil content from the compressed air supplied from the compressor. It prevents the pneumatic device malfunctions caused by the moisture and oil in the air. The auto-drain and the filter (IN / OUT) are equipped with gages respectively.

- Filter Unit: T105A-1000MSP (Maeda Shell)

J-011518 1 0.00

Manual Pulse Generator (Separate Type) Separate type hand-held handle switch improves the operability at the setup. The separate type handle switch is connected to the operation panel with a curled cord. It can be attached to a desired place on the machine using the magnet on the back side. The separate type handle switch equipped with the high-intensity white LED as standard can also be used as a hand-held light to illuminate the workpiece machining face or the dark area where the machine light does not reach.

*There is no Manual Pulse Generator on the operation panel.

J-015539 1 0.00

Automatic residual pressure exhaust valve When the machine goes into an emergency stop, a residual pressure in pneumatic line is automaically released. It prevents accidents caused by residual pressure during maintenance.

J-026550 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 17 / 32

Voltage of Customer Factory 400 V This machine is shipped with voltage set to 400 V specification.

Direct machine connection admissible for TN-S system only, then transformer is not needed.

When use TT or IT system, transformer is necessary for conversion.

(Caution) If the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage, frequency and power supply system of the customer's factory.

J-014887 1 0.00

Frequency 60 Hz This machine is shipped with frequency set to 60 Hz specification.

(Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and frequency of the customer's factory.

J-G00961 1 0.00

Setting Unit, Inch The unit to be used for the screen display and program commands is set to "inch".

Turning: "Inch" specification for the turret

J-004472 1 0.00

Technology Cycle

Motor driven coolant nozzle

A nozzle installed on the ceiling of the machine is driven by a motor on two axes to clean by coolant inside the machine. The nozzles operate in conjunction with the shower coolant to clean the entire machine according to preset cleaning paths.

This prevents problems during long hours of automatic operation, efficiently removes chips, and reduces the frequency of chip cleaning inside the machine.

J-027433 1 3,000.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 18 / 32

MPC (Machine Protection Control) It monitors vibration with acceleration sensors mounted on the spindle. This technology cycle stops the spindle to minimize the damage to the machine when abnormal vibration value is detected. It is also equipped with the function to diagnose the condition of spindle bearings and imbalance. Therefore, It is useful for preventive maintenance of the spindle.

*Additional necessary NC option : none <Supplementary information for Siemens control machine> If a function equivalent to MPC 2.0 (cutting torque monitoring), which can be selected on the milling machine, J-004681 (Easy Tool Monitoring) is additionally required.

Note: MPC is a feature that minimizes the damage to the machine and no warranty in case of collisions.

J-015572* 1 8,100.00

Measuring Pro This is a function to measure a workpiece using in-machine measuring system (spindle) touch sensor.

It is possible to program automatic measurements on a dedicated guidance screen.

In addition to various measuring functions, measuring time saving and measuring data export can be realized.

Cannot be used with special shaped touch sensors such as L-shaped probes and cross-shaped probes.

J-056140 1 0.00

Options for Control

400 Sets of Tool Offset in Total 400 sets of tool offset can be registered in total.

The offset amounts of tool length, tool diameter and tool position can be registered for each set of tool offset, and up to 400 tools can have the one set of tool offset respectively.

J-022006 1 0.00

Options for MAPPS / SIEMENS / CELOS Control*

IoTconnector CL

By equipping a 4G cellular module, a secure connection is provided exclusively to DMG MORI's online services (e.g., NETservice for remote maintenance), independent of the customer's network.

J-027394* 1 0.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 19 / 32

Screen Text Language

Screen display English

Language on MAPPS Screen: English Language on MAPPS Warning Screen: English Language on NC Screen: English Language on PC Screen: English

J-000080 1 0.00

Price machine and options 363,750.00

Services USD USD

Special constructions services

DMG MORI Precision Protection Program

SK001 1

19,360.00

LOGISTICS: JK Hackl, Machine Freight-Out Davis, CA to Chicago, IL

SK002 1

10,120.00

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 DMG MORI Connect

A 2-year subscription of DMG MORI connectivity software:

+ Messenger Cloud - Machine monitoring through web application + NETservice 4.0 - Remote service by DMG MORI Hotline via CELOS APP *NETservice is only available on machines with IoTconnector

Z-COST06 1 1,000.00

EG1: Standard Machine Training Z-COST07 1 0.00

Price services 30,480.00

Price machine and options 363,750.00 Discount machine and options (11.30 %) -41,104.00 Price services 30,480.00

Total price 353,126.00

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 20 / 32

Attachment

Technical Description

J-A02240

Basic machine NHX 4000 <4th Generation> The specifications below apply to a basic machine without additional options. Specifications in square brackets [ ] are values or features for a machine with additional options.

Travel

X-axis travel <longitudinal of movement of saddle> mm (in.) 560 (22.0) Y-axis travel <vertical movement of spindle head> mm (in.) 560 (22.0) Z-axis travel <cross movement of pallet> mm (in.) 660 (26.0) Distance from pallet surface to spindle center mm (in.) 80 - 640 (3.1 - 25.2)

[T-slot: 60 – 620 (2.4 – 24.4)]

Distance from pallet center to spindle gage plane mm (in.) 70 - 730 (2.8 – 28.7)

Pallet

Distance from floor surface to pallet surface mm (in.) 1,050 (41.3) [T-slot: 1,070 (42.1)]

Pallet working surface mm (in.) 400 x 400 (15.7 x 15.7) Pallet loading capacity kg (lb.) 400 (880) Maximum workpiece swing diameter mm (in.) 630 (24.8) Maximum workpiece height mm (in.) 900 (35.4)

[T-slot: 880 (34.6)]

Pallet surface configuration M16 (1/2-13 UNC) Tap: 24 holes

Pitch 80 mm (3 1/8 in.)

Minimum pallet Indexing angle 0.001° <full indexing table> [1°]

Pallet indexing time <90°> sec 0.73 <full indexing table> [1.65 <1° indexing table>]

Max. spindle speed:

- Standard min-1 20,000

- High torque min-1 [15,000]

- High speed min-1 [30,000]

Max. spindle speed torque <10%ED>:

- Standard N·m (ft·lbf) 221 (163.0)

- High torque N·m (ft·lbf) [322 (237.5)]

- High speed N·m (ft·lbf) [105 (77.4)]

Type of spindle taper hole No. 40 Spindle bearing inner diameter mm (in.) 80 (3.1)

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 21 / 32

Feedrate

Rapid traverse rate:

- X-axis mm/min

(ipm) 70,000 (2,755.9)

- Y-axis mm/min (ipm)

70,000 (2,755.9)

- Z-axis mm/min

(ipm)

70,000 (2,755.9)

Cutting feedrate <with high precision control> mm/min (ipm)

0 - 70,000 (0 - 2,755.9)

Jog feedrate mm/min (ipm)

0 - 5,000 (0 – 197.0) <20-step>

ATC

Type of tool shank HSK-A63 [BT40]

[CAT40] [DIN40]

Type of retention knob [Special <center through>]

[45° <MAS-I>]

[60° <MAS-II>] [DIN]

[DMG MORI 90° type]

Tool storage capacity:

- Ring-type tools 60

- Chain-type tools [120]

- Rack-type tools [180] [240] [300]

Maximum tool diameter <with adjacent tools> mm (in.) 70 (2.7) Maximum tool diameter <without adjacent tools>:

- Ring-type mm (in.) 170 (6.6)

- Chain-type, rack-type mm (in.) [140 (5.5)]

- Special rack-type (180, 240 tools) mm (in.) [205 (8.1)] Maximum tool length mm (in.) 450 (17.7) Maximum tool mass kg (lb.) 12 (26.4)

Maximum tool mass moment <From spindle gauge line>

N·m (ft·lbf) 7.84 (5.78)

Method of tool selection:

- Ring-type Technical memory random

- Chain-type Fixed address, shorter route access

- Rack-type Fixed address Tool changing time <cut-to-cut> {60-tool <ring-type>} sec 2.2

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 22 / 32

APC

Number of pallets 2 Method of pallet change Turn type

Motor

Spindle drive motor <25%ED/30%ED/cont>:

- Standard kW (HP) 50/42/30

(67/56.3/40.2)

- High torque kW (HP) [55/37/30

(73.7/49.6/40.2)]

- High speed kW (HP) [40/25/22

(53.6/33.5/29.5)]

Feed motor:

- X-axis kW (HP) 5.5 (7.4)

- Y-axis kW (HP) 5.0 (6.7)

- Z-axis kW (HP) 5.5 (7.4)

- B-axis kW (HP) 3.9 (5.2) <full 4th axis rotary table> [2.5 (3.4)]

Coolant pump motor

- In-tank agitation, Coolant gun kW (HP) 1.1 (1.47)

- Cyclone filter kW (HP) 2.2 (3.0)

- Spindle, Shower, Base, Drum filter kW (HP) 3.0 (4.0)

Tank capacity

Coolant tank capacity L (gal.) 900 (237.8)

Machine Size

Machine height <from floor> mm (in.) 2,697 (106.2) Floor space <width x depth> mm (in.) 2,680 x 4,561

(105.5 x 179.6) Mass of machine <with coolant tank> kg (lb.) 9,200 (20,283)

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 23 / 32

J-023211

NC Unit F31iB Plus

Controlled axis

Controlled axis X, Y, Z, B Simultaneously number of controllable axes 4 axes Least input increment 0.001 mm Max commandable value ±999,999.999 mm

Stroke limit check before movement Software damper Abnormal load detection function Load monitor function C Soft key type

Operation

Dry run Single block Jog feed 0−5,000 mm/min (0−197.0 ipm)

<20 steps> Manual reference position return Manual pulse handle feed Manual pulse generator: 1 unit x1, x10, x50, x100 (per pulse)

Z-axis neglect Program restart

Interpolation function

Nano interpolation

Uni-directional approach/unidirectional positioning Helical interpolation Optional 2 axes and other 1 axis

Feed function

Rapid traverse rate Max. 70,000 mm/min (2,755.9 ipm) Feed per minute/cutting federate <when using high-precision control <look-ahead control>>

1 – 70,000 mm/min (0.01 – 2,755.9 ipm)

High accuracy control <Look-ahead control> Rapid traverse override F - 100% <20 steps> Constant tangential feedrate control Feedrate override 0 - 200% <10% increments>

Feedrate override cancel AI contour control II Look-ahead blocks are up to 200 blocks.

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 24 / 32

Program input

Optional block skip Program number/program name

8 digits

Absolute/incremental command Decimal point programming Electrical calculator type decimal point programming is changeable using parameter.

Radius specification Plane selection Programmable data input Sub-program call Up to 10 nestings Custom macro Custom macro common variables 1,100 variables (#100 to #199, #500 to #999, #98000 to #98499) Drilling cycle FS15 format Additional workpiece coordinate systems 300 sets Coordinate system rotation

Miscellaneous function/spindle function

Spindle override 50 - 150% <10% increments> Spindle orientation Synchronous tapping

Tool function/Tool offset function

Tool function <T function> T8-digit Number of tool offsets 400 sets <A set is defined as radius and length combination. If radius and length offset data are set individually, the value indicates the number of data.>

Tool offset data memory C D/H code, geometry and wear offset data

Tool length correction Tool radius offset Tool length measurement

Rotary table dynamic fixture offset Tool management system

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 25 / 32

Mechanical accuracy compensation

Backlash compensation ±9,999 pulses Rapid traverse/cutting feed backlash compensation Stored pitch error compensation Interpolation type pitch error compensation

Editing function

Expanded program editing A limitation in the copy buffer (10 KB) Background editing Undo/Redo function <MAPPS> Line no. display <MAPPS>

Setting and display

Status display Clock function Position read-out, position display

Program comment display 128 characters Parameter setting display Message list display Sensor information display Power consumption Message history display Running time display/No. of parts display Actual feedrate display

Self-diagnosis function Includes alarm display, I/O signal diagnosis, ladder diagram

Operation panel: Display section 21.3-inch TFT color LCD

Data input/output

I/O interface Network drive, USB memory 6 GB Program storage area (storage area for user data including NC program)

Files up to 10 MB in size can be edited

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 26 / 32

Standard Equipment

Pallet/Pallet changing system

− 2-station turn-type APC

− Form of pallet - tap <metric, inch>

− Full 4th axis rotary table

− Pallet edge locator

− Spindle drive motor is 50/42/30 kW (67/56.3/40.2 HP) <15%ED/30 min/cont.> and max. spindle speed is 20,000 min-1.

− Type of tool shank HSKA-63

− Tool storage capacity is 60 tools. <ring type>

Coolant

− Coolant system

− Shower coolant <used at the same time as spindle coolant>

− Coolant float switch <upper limit detection, lower limit detection, lower limit forecast>

− Coolant gun <Setup station side>

− Through-spindle coolant system (unit on coolant tank) center through 1.5 MPa (217.5 psi) *Not included when "Interface for Through-spindle coolant..." option is selected.

− Oil skimmer

Chip disposal

− Chip conveyor <Rear discharge, drum filter type + cyclone filter>

− Air blow for tool tip <when the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required>

− zero-sludge COOLANT

− In-machine stainless cover

Measurement

− In-machine measuring system (spindle)

− Tool breakage detection system (magazine)

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 27 / 32

High accuracy positioning

− Full closed loop control (Scale feedback)

− Spindle water-glycol chiller (chilling unit)

Safety features

− Full cover

− Door interlock system: front door/ set up station door/ magazine door/ electrical cabinet door Mechanical lock: front door/ set up station door/ magazine door

− Low hydraulic pressure detecting switch

− Low air pressure detecting switch

− Automatic residual pressure exhaust valve

− Oil-based coolant detection

− Maintenance cover safety switch

Others

− Automatic power-off system

− LED worklight

− Pallet seating confirmation

− Leveling jack <anchor type>

− Manual pulse generator (separate type)

− Hand tools

− Cooling oil float switch

− Multi dry filter

− Magazine operation panel

− Signal lamp

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 28 / 32

J-015572

MPC Machine Protection Control Vorbeugender Schutz durch Schwingungsensorik (SDS) an der Frässpindel:

Maschinenschutz durch Schnellabschaltung Variable werkzeug- und prozessspezische Abschaltlimits Prozessüberwachung (Vibration und Drehmoment) mittels Balkenanzeige auf der Maschinensteuerung Lagerzustandsdiagnose der Frässpindel Hinweis: Es kann keine Gewährleistung bei Auffahrschäden gegeben werden

J-027394

IoTconnector The IoTconnector enables to use the DMG MORI online services (eg NETservice). Thanks to an integrated firewall, the machine is protected against attacks despite the online connection. In addition, the IoTconnector receives security updates via an integrated DEVICE MANAGEMENT.

Series J1722 valid 02/01/2026 - 12/31/2050 05/08/2026 | 29 / 32

DMG MORI USA INC.

GENERAL TERMS & CONDITIONS

These terms and conditions of sale (“Terms”) are the only terms which govern the sale of goods and/or services (“Goods”) by DMG MORI USA, Inc., or its affiliates (collectively “DMG MORI”) to Buyer and DMG MORI will only sell the Goods subject to these Terms. All quotations, proposals, all Buyer’s purchase orders, all service, and all confirmations or acknowledgments of Buyer’s purchase orders by DMG MORI are subject to these Terms. These Terms prevail over any of Buyer’s general terms and conditions of purchase regardless whether or when Buyer has submitted its purchase order or such terms. Buyer’s written acknowledgment or payment of a deposit for the Goods shall be construed as Buyer’s acceptance of these Terms. No additional or other terms will be binding on DMG

MORI unless accepted in writing signed by a duly authorized representative of DMG MORI. Notwithstanding anything herein to the contrary, if a written contract signed by both parties is in existence covering the sale of the Goods covered hereby, the terms and conditions of said contract shall prevail to the extent they are inconsistent with these Terms. The “Buyer” herein refers to the customer of

DMG MORI as listed on the purchase or sales order regardless of form (“Order”).

PRICES. Unless otherwise noted, all prices quoted are subject to change without notice. Prices do not include sales, use, excise, VAT, GST, property or similar taxes arising out of or relating to the sale or use of the Goods. Buyer shall indemnify, defend and hold DMG MORI harmless from and against the imposition and payment of such taxes, whether or not they are stated in any invoice for the

Goods. DMG MORI, at its option, may at any time separately bill Buyer and Buyer shall pay for any taxes not included in DMG MORI’s invoice. Any prices provided in a DMG MORI quotation or confirmed purchase order are based on the duties and tariffs in effect as of the date of issuance of the quote and are subjec t to change as a result of any changes in the applicable duties and / or tariffs arising after the date of the quote.

PAYMENT TERMS. Unless otherwise mutually agreed to by the parties in writing, Buyer shall pay to DMG MORI such amounts according to the following payment schedule: 30% down-payment due at the time of signed Order; 60% due upon on the earlier of (i) Shipment or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI; 10% due earlier of (i) installation date, (ii) 30 days after Shipment or (iii) immediately after the machine is first used for commercial production. Shipment shall mean when DMG MORI delivers the Goods to a carrier for shipment to Buyer. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price. If acceptance of the Goods by

Buyer (which shall not be unreasonably withheld) after Shipment by DMG MORI is delayed more than thirty (30) days from the date of delivery of the Goods because of conditions other than the Goods or services provided by DMG MORI, including but not limited to delay in the provision of goods or services by Buyer or other suppliers, Buyer will pay to DMG MORI as interest 0.4% of the amount due and payable per week until acceptance by Buyer. Receipt and subsequent bank deposit of a down payment shall not be construed as acceptance of the purchase order until said order is accepted in writing by DMG MORI. In the event of legal action to enforce these Terms, Buyer shall reimburse DMG MORI for its reasonable costs and attorney’s fees. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit to promptly meet the payment terms of the order. Acceptance and payment by Buyer with respect to the Goods shipped by DMG MORI shall not be delayed because of any delay in shipment by DMG MORI of accessory or ancillary equipment not essential to the operation of the Goods already shipped; in such event, the payment terms set forth in this paragraph shall be applicable to the Goods shipped as of the date of Shipment and to subsequent Shipments of Goods as they occur.

DMQP, PARTS, AND SERVICE PAYMENT TERMS, CANCELLATIONS AND RETURNS. Excluding items or service included in machine Orders, Buyer shall pay all other DMG MORI invoices (30) days from invoice date. Late payment shall bear interest in the amount of 0.4% of the amount due per week. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit or promptly meet the payment terms. Requests for cancellations must be made within 24 hours of the order. Requests for returns must be made within 30 days of Shipment. All returned parts must be authorized in advance, must be in original condit ion and the return packaging must contain the return authorization number and pass DMG

MORI inspection.

DELIVERY. DMG MORI will exert its best efforts to cause the Goods to be shipped in accordance with its quotations and these Terms. However, all dates stated by DMG MORI are approximate dates only, and are estimated in good faith to the best of DMG MORI’s ability, commensurate with foreseeable scheduling and subject to availability of product and transit. DMG MORI shall not be liable for any loss or damage whatsoever, including loss of income and/or profits, incidental, special or consequential damages resulting from DMG MORI’s delayed shipment of the Goods for any reason whatsoever. Any claims for shortages or claims that the Goods shipped is other than that which was ordered or claims for damages prior to delivery to Buyer or Buyer's agent must be made in writ ing to DMG MORI within fif teen (15) days after the arrival of the Goods at Buyer's plant or place of business.

SHIPPING TERMS. Unless otherwise mutually agreed by the parties, delivery shall be made CIP Customer Location, Incoterms 2010. Customer Loc ation is the address indicated as such in the Order.

FOUNDATION SPECIFICATION. Buyer is responsible for preparing its facility for machine installation based on the machine’s foundation specifications.

ACCEPTANCE CRITERIA. Unless otherwise agreed by the parties in a signed writ ing by authorized representatives of each party, the applicable DMG MORI Installation Protocol shall form the sole basis of acceptance requirements for any machine purchased by Buyer. Notwithstanding anything to the contrary herein, a machine shall be deemed accepted on the earlier of sixty (60) days after

Shipment or such date that the machine is first used by Buyer for commercial production. Upon completion of agreed acceptance criteria, installation or deemed acceptance, whichever is applicable, Buyer agrees to complete all necessary paperwork to acknowledge acceptance of the machine. Buyer's failure to complete such paperwork shall have no effect on the acceptance of the machine.

TITLE AND RISK OF LOSS. Title and r isk of loss shall pass from DMG MORI to Buyer at Shipment and from thereon, the carrier shall be deemed to be acting for and on behalf of Buyer. The terms of payment of the Goods will not be affected by damage to or destruction of the Goods while in transit. Until such time that t itle to the Goods is transferred to Buyer, DMG MORI hereby grants Buyer a security interest in the Goods proportionate to any payment made related to the Goods. At such time that Goods are delivered to Buyer, Buyer hereby grants a purchase money security interest in the

Goods to DMG MORI, proportionate to any remaining balance owed. Each Party shall execute any such statements or other documentation necessary to perfect the other Party’s security interest in such Goods.

CANCELLATIONS. Orders with Goods that have already been shipped from the factory cannot be cancelled by Buyer and Buyer shall be liable for the full Order price. “Special Orders”, which are orders for items customized for the Buyer cannot be cancelled. Orders other than Special Orders that have not been shipped may be canceled in writing by Buyer to DMG MORI but shall be subject to a cancellation charge as set forth below. Buyer and DMG MORI acknowledge and agree that the DMG MORI’s harm caused by Buyers cancellation would be impossible or very difficult to accurately estimate at the date of the Order, and that the cancellation charges set forth below are reasonable estimates of the damages which DMG MORI will incur as a result of the cancellation. Orders that are cancelled within one week of the date of the Order are subject to a cancellation fee equal to 10% of the total Order price. Orders cancelled more than one week after the date of the Order and more than 90 days before the planned shipment date are subject to a cancellation fee of 20%of the Order price. Orders cancelled from 90 to 61 days before the planned shipment date are subject to a cancellation fee of 30% of the Order price. Orders cancelled from 60 to 31 days before the planned shipment date are subject to a cancellation fee of 40% of the Order price. Orders cancelled 30 days or less before the planned shipment date are subject to a cancellation fee of up to 50% of the Order price.

DMG MORI REMEDIES FOR NON-PAYMENT. DMG MORI reserves all rights including rights of replevin and damages for goods remaining unpaid, in whole or in part, more than sixty (60) days after payment is due.

BUYER REMEDIES. DMG MORI may, at its sole discretion, resolve any Buyer claim relating to the Goods by repossessing such goods and reimburs ing Buyer the purchase price for the Goods less depreciation arising from Buyer’s use of the Goods.

LIMITATION OF WARRANTY. EXCEPT AS SET FORTH IN THE DMG MORI LIMITED WARRANTY (A COPY OF WHICH IS ATTACHED TO THE SALES ORDER OR MAY BE REVIEWED ON THE

DMG MORI USA WEBSITE), DMG MORI MAKES NO OTHER REPRESENTATIONS OR WARRANTIES WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING BUT NOT LIMITED TO (a)

ANY WARRANTY OF MERCHANTABILITY; OR (b) ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE OR USAGE OF TRADE. DMG MORI MAKES NO WARRANTY AS TO THE QUALITY, FINISH, ACCURACY OR TOLERANCE, COMPLIANCE WITH ELECTRICAL, HYDRAULIC, PNEUMATIC OR OTHER SAFETY CODES REQUIRED BY ANY GOVERNMENTAL OR QUASI-GOVERNMENTAL BODY, OR AS TO THE

EFFICIENCY, PRODUCTIVITY OR PERFORMANCE OF ANY GOOD.

LIMITATION OF LIABILITY. BUYER EXPRESSLY AGREES THAT IN NO EVENT SHALL DMG MORI BE LIABLE UNDER ANY THEORY OF RECOVERY, WHETHER BASED IN CONTRACT, IN

TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), UNDER WARRANTY, OR OTHERWISE, FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE WHATSOEVER, ANY LOSS OF PROFITS, LOSS OF GOODWILL, LOSS OF OPPORTUNITY, LOSS OF BUSINESS, LOSS OF REPUTATION AS A RESULT OF ANY CLAIM BROUGHT BY BUYER

OR A THIRD PARTY ARISING OUT OF OR RELATING TO: (i) ANY BREACH BY DMG MORI OF THESE TERMS; (ii) ANY REPRESENTATION, STATEMENT OR TORTIOUS ACT OR OMISSION (INCLUDING NEGLIGENCE) OF DMG MORI; AND (iii) ANY USE OF THE GOODS OR THE FAILURE OF THE GOODS TO OPERATE PROPERLY; EVEN IF SUCH LOSSES WAS IN

CONTEMPLATION OF THE PARTIES OR WAS WHOLLY FORESEEABLE.

BUYER SHALL INDEMNIFY, DEFEND AND HOLD DMG MORI HARMLESS FROM AND AGAINST ALL CLAIMS, ACTIONS, DAMAGES, LIABILITIES, COSTS AND EXPENSES (INCLUDING BUT

NOT LIMITED TO ATTORNEY’S FEES) INVOLVING A THIRD PARTY CLAIM ARISING OUT OF BUYER’S USE OF THE GOODS EXCEPT TO THE EXTENT CAUSED…