3-2026-05-08 Quote 52603770701 J-NLX2500GE2 700 Richard J. Daley AVI college Campuses SN NLX25251063.pdf

DMG MORI Chicago

Chicago TC 2400 Huntington Blvd. Hoffman Estates IL 60192

Phone:+1-847-593-5400 Fax: +1-847-593-5433

URL: http://www.dmgmori.com

Richard J. Daley

AVI college Campuses 2800 S Western

Chicago, Illinois 60608

05/08/2026

Quotation No. 52603770701

In reference to our recent discussions regarding your interest in DMG MORI product, we are pleased to provide in the subsequent pages your quote for the following machine:

Product Description : NLX 2500 | 700 2nd Generation Please refer to the following pages

Serial Number : NLX25251063

Payment terms : 30% down-payment due at the time of signed SOC/PO, 60% due N10 upon on the earlier of (i) shipment date or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI, 10% due earlier of (i) installation date or (ii) 30 days after shipment. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price.

Incoterms : CIP (INCOTERM 2020) Incoterms location : Customer's Lot

Delivery : Expected delivery 12/27/2025, after down payment has been received and subject to timely deliveries of DMG MORI Suppliers Valid to : 05/22/2026 Notes : Machine freight included. Customer responsible for rigging costs.

We trust that this information meets your project requirements. Please contact us should you have any further questions regarding the information presented in the following quote.

Yours Sincerely, DMG MORI Chicago

Quotation for

Richard J. Daley AVI college Campuses

NLX 2500 | 700 2nd Generation

Serial Number: NLX25251063

Highlights

- Slideways are used for all axes

- Coolant circulation inside the castings and Ball screw core cooling controls thermal displacement

- The performance of the left spindle and the right spindle (option) are equivalent. (Right spindle 10-inch specification)

- With BMT (Built-in motor turret) and milling capability equivalent to a machining center.

- Max. turning length 708 mm (27.8 inch)

- Bar work capacity dia. 105 mm (4.13 inch) (Left spindle / Right spindle 10-inch specification)

- Y-axis travel: ±60 mm (2.36 inch)

- Overhang cutting rotary tool : 100 mm (3.97 inch) (for O・D and right spindle)

- Solution for Chips, Coolant and Mist (In-machine SUS cover, zero sludge coolant tank (Option), zeroFOG mist collector (Option))

- Various automated systems

Quote number: 52603770701

Series J1479 05/08/2026 | 3 / 36 Price status: 05/08/2026

* further description see attachment

Investment summary

Machine and Options

Basic Machine

NLX 2500 | 700 <2nd Generation> J-A02175 1 217,000.00 USD

Control Fanuc_F31iB_Plus with CELOS X J-014902 1 0.00 USD CELOS X - ERGOline X (MAPPS) J-013093 1 0.00 USD

Spindle

(Left Spindle) Through-Spindle Hole Dia. 115 mm (4.53-inch) (Spindle Speed 5,000 min-1, 30 / 22 kW) (Standard) (FANUC)

J-023139 1 0.00 USD

Options for Spindle

Clamping pressure adjustment at the control for Left Spindle (Standard)

J-025531 1 0.00 USD

Chuck for Left spindle (Main spindle)

(Left Spindle) KITAGAWA 10in. Hollow Chuck BR10A821 (Through-spindle hole diameter : 81 mm)

(SK-OP)

J-013368 1 2,320.00 USD

(Left Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 10in. Hollow Chuck BR10A821 / BR10-21A (Bar work capacity dia. 80 mm (3.14 inch)) (without chuck body)

J-013383 1 5,960.00 USD

Equipment for Chucks

Chuck foot switch (double pedal) for Left Spindle (Standard)

J-025533 1 0.00 USD

Chuck cylinder stroke check (linear position monitoring) (Left Spindle) (Standard)

J-014488 1 0.00 USD

Chuck inching function for Left Spindle (Standard) J-025535 1 0.00 USD

Options for Turret 12-Station Bolt-Tightened Turret (BMT60), Rotary tool spindle 13 / 10 kW, 86 / 56 Nm, 12,000 min-1 (Standard)

(FANUC)

J-023146 1 0.00 USD

Turret Y-axis Specification J-023145 1 0.00 USD Overhang of O.D. Cutting Rotary Tool: 100 mm (3.94 inch.)

J-023168 1 0.00 USD

Tailstock

Tailstock (Live Center MT5 Specification, Need to select Live center) (Standard)

J-016111 1 0.00 USD

Coolant supply / Chip removal

Usable Coolant Type: Water-Soluble Coolant J-G00428 1 0.00 USD Chip Conveyor (Right Discharge, Hinge Type) (/700) J-023174 1 9,380.00 USD High-pressure coolant system (800/ 1,100 W) J-002147 1 355.00 USD Interface for Super-High-Pressure Coolant System (7

MPa (1,015 psi), Variable Pressure, ChipBLASTER)

J-023312 1 4,580.00 USD

Without Coolant chiller (Prepared by customer) (SK-OP) J-026312 1 0.00 USD Air blow for tool tip (SK-OP) J-003273 1 1,530.00 USD Chip Flushing Coolant for Bed Cover J-026805 1 2,000.00 USD

Series J1479 05/08/2026 | 4 / 36

Mist collector zeroFOG #1 (Built-in) J-026801 1 8,710.00 USD Double Slide Seals J-023169 1 0.00 USD Coolant Level sensor (upper limit, lower limit forecast and lower limit detection) (Standard)

J-022043 1 0.00 USD

Measuring / Monitoring

Manual in-machine tool presetter (Swing type) (STD) J-017110 1 0.00 USD

Automation Signal lamp 4 colors (Red, yellow, green, blue) J-004166 1 495.00 USD Left Workpiece unloader (left side take-out, receiver type)

J-023172 1 16,850.00 USD

Interface for EtherNet/IP (SK-OP) J-015384 1 850.00 USD Interface for bar feeder (EtherNet/IP Interface, TYPE5)

(Connector type) (SK-OP)

J-056318 1 1,550.00 USD

Voltage of Bar feeder Interface : 400 V J-056321 1 0.00 USD

General Options Ball Screw Core Cooling for X,Y,Z-axis (Standard) J-023199 1 0.00 USD Multi dry filter (SK-OP) J-002210 1 635.00 USD Manual pulse generator (separate type) J-026800 1 2,210.00 USD Voltage of Customer Factory 400 V J-014887 1 0.00 USD Frequency 60 Hz J-G00961 1 0.00 USD Setting Unit inch J-004472 1 0.00 USD

Technology Cycle

Alternating speed J-015571 1 840.00 USD Keyway broaching (FANUC) (SK-OP) J-012929 1 1,020.00 USD

Options for Control

Efficient Production Package (High speed canned cycle) J-008657 1 2,650.00 USD Addition of optional block skip (soft key type 2-9) J-008244 1 835.00 USD X-Axis Direction JIS / ISO Standard J-G00618 1 0.00 USD

Screen Text Language

Screen display English J-000080 1 0.00 USD

Price machine and options 279,770.00 USD

Services

Special constructions services DMG MORI Precision Protection Program SK001 1 15,280.00 USD LOGISTICS: JK Hackl, Machine Freight-Out Los

Angeles, CA to Chicago, IL

SK002 1 7,810.00 USD

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 USD DMG MORI Connect Z-COST06 1 1,000.00 USD EG1: Standard Machine Training Z-COST07 1 0.00 USD

Price services 24,090.00 USD

Price machine and options 279,770.00 USD Discount machine and options -25,179.00 USD Price services 24,090.00 USD

Series J1479 05/08/2026 | 5 / 36

Total price 278,681.00 USD

Quotation note

Tariff 27,868.10 USD

The referenced in this Quotation or Order is an estimate only, based on duty and tariff rates in effect as of the date of the Quotation or Order. Duty and tariff rates are subject to change and may be assessed, increased, decreased, or modified by governmental authorities at any time. Customer agrees to be responsible for the actual amount of tariffs, duties, or similar governmental charges applicable at the time of importation of the machine, regardless of the estimated Tariff Surcharge shown. The final Tariff Surcharge will be determined based on the actual amount assessed at the time of import and will be invoiced with the final machine payment. Any difference between the estimated Tariff Surcharge and the actual assessed amount will be reflected in the final invoice. In the event tariff rates are reduced prior to importation, DMG MORI will pass through any resulting reduction in the actual Tariff Surcharge reflected on the final invoice.

Total Price (with Tariff) 306,549.10 USD

Precision Protection Program

DMG MORI wants to ensure you have complete coverage for your investment.

Our industry unique Precision Protection Program can protect you against unexpected service and parts costs resulting from a breakdown or collision, arising from operator error.

Trust in us to provide you with the latest technology and superior coverage to protect your business and valued investment!

What is covered?

+ DMG MORI machinery and DMQP peripherals + Cost to repair or replace equipment damaged by a covered breakdown, including parts and labor, subject to a $1,000 deductible per claim

+ Includes coverage for the repair costs arising from operator error, including parts and labor, subject to a $1,000 deductible per claim

What is the coverage limit?

+ The Precision Protection limit is the purchase price of the equipment + Coverage is effective for a 5-year term from the start of installation

What is the cost?

+ 6% of the purchase price of the machine.

• Please note: The machine must be maintained, serviced & repaired in accordance with DMG MORI’s recommended guidelines, using only DMG MORI approved service engineers & parts

DMG MORI Connect

Streamline your production process while maximizing output and machine lifecycle.

2 years of service included during standard machine warranty.

Series J1479 05/08/2026 | 6 / 36

DMG MORI Messenger Cloud

• Real time monitoring and history analysis platform

• Convenient web access from PCs and mobile devices

• Simple data exports for in-depth evaluation and reporting

DMG MORI NETservice

• Remote diagnosis supported by DMG MORI service experts

• Immediate and direct support minimizes downtime and service costs

• Secure encrypted connection

YouTube video

Series J1479 05/08/2026 | 7 / 36

DMG MORI

NLX 2500 | 700 2nd Generation

Machine and Options USD USD

Basic Machine

NLX 2500 | 700 <2nd Generation> J-A02175* 1 217,000.00

Control

Fanuc_F31iB_Plus with CELOS X Control unit: Fanuc F31iB Plus Operation system: CELOS (MAPPS X)

J-014902* 1 0.00

CELOS X - ERGOline X (MAPPS) It is a machine operation panel with 21.3-inch multi touch screen, which realizes comfortable operability. It documents, visualizes and centrally manages the order, process and machine data, allowing the networking with CAD/CAM and also the function extension using applications. The user-friendly, highly-productive MAPPS system is installed.

ERGOline X : Covered by a 5-year warranty service

J-013093 1 0.00

Spindle

(Left Spindle) Through-Spindle Hole Dia. 115 mm

(4.53-inch) (Spindle Speed 5,000 min-1, 30 / 22 kW) (Standard) (FANUC) turnMASTER Max. spindle speed: 5,000 min-1 Spindle nose type: JIS A2-8 Through-spindle hole diameter: Φ115 mm (dia.4.53 inch.)

Spindle drive motor: 30 / 22 / 22 kW (40.2 / 29.5 /

29.5 HP) (15%ED / 40%ED / cont)

Spindle torque: 844 / 700 / 618 Nm (662.5 /

516.32 / 455.8 ft·lbf) (15%ED / 40%ED / cont) MASTER series spindle: Covered by a 5 years warranty service

J-023139 1 0.00

Series J1479 05/08/2026 | 8 / 36

Options for Spindle

Clamping pressure adjustment at the control for the Left Spindle (Standard) The input pressure (hydraulic pressure) of the chuck cylinder is set in the NC program or on the screen.

The minimum pressure that can be set is 0.8 MPa, and the maximum pressure is limited by the combination of chuck cylinder and chuck.

However, if the maximum pressure exceeds 4.0 MPa, the maximum pressure is limited to 4.0 MPa. (Depending on the hydraulic control equipment) There is one pressure setting, and its value applies to both clamping and unclamping.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

It is necessary to unclamp the chuck after switching the chucking pressure.

J-025531 1 0.00

Chuck for Left spindle (Main spindle)

(Left Spindle) KITAGAWA 10-inch Hollow Chuck

BR10A821

Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works.

Chuck outer diameter: Φ254 mm (dia.10 inch.)

Through-hole diameter: Φ81 mm (dia. 3.18 inch.)

Gripping diameter: Max. Φ254 mm (dia.10 inch.), Min. Φ31 mm (dia.1.22 inch.)

Jaw stroke (diameter): 8.8 mm (0.35 inch.)

Plunger stroke: 19 mm (0.75 inch.)

Max. allowable pull force: 49 kN (11.01 klbf) Max. static gripping force: 123 kN (27.64 klbf) Dynamic gripping force at max. speed: 44 kN (9.88 klbf) Max. allowable speed: 4,500 min-1 Mass: 40.9 kg (89.99 lb.)

*The data above are information on the chuck body. Since it may be limited by this machine specification, please check the contents of the mounted cylinder set for details.

Attention!

Please pay attention to the maximum clamping force of the chuck.

J-013368 1 2,320.00

Series J1479 05/08/2026 | 9 / 36

(Left Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 10in. Hollow Chuck BR10A821 / BR10-21A (Bar work capacity dia. 80 mm (3.14 inch)) (without chuck body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination with chuck and the specification.

Attention!

Please pay attention to the maximum clamping force of the chuck.

J-013383 1 5,960.00

Equipment for Chucks

Chuck foot switch (double pedal) for Left Spindle

(Standard) This switch is used to open and close the chuck with the foot. Push the lock release plate of each chuck foot switch forward to release the lock and step on the pedal.

Two foot switches are used for opening and closing operation of the left spindle chuck.

J-025533 1 0.00

Chuck cylinder stroke check (linear position monitoring) (Left Spindle) The position of the chuck cylinder is read with the linear sensor and displayed as a number. The chuck clamping/unclamping position can be set on the screen for each workpiece.

J-014488 1 0.00

Chuck inching function for Left Spindle Inching operation of chuck opening/closing is possible.

If a chuck cylinder is to be arranged by the customer, be sure to use a chuck cylinder with a mechanism to prevent the workpiece from falling out when the hydraulic pressure is shut off (pilot check mechanism, check valve). In the event of hydraulic pressure shutdown due to power failure, etc., the chuck may not be able to maintain its gripping force, resulting in workpiece scattering, machine damage, and personal injury.

J-025535 1 0.00

Series J1479 05/08/2026 | 10 / 36

Options for Turret

12-Station Bolt-Tightened Turret, Rotary tool spindle 13 / 10 kW, 86 / 56 Nm, 12,000 min-1 (Standard) (FANUC) In-house 12 station turret. Please refer to the axis travel diagrams and turret interference diagrams for the movable region.

BMT (Built-In Motor Turret) is installed, and the oil jacket cooling suppresses heat generation to implement excellent machining accuracy.

Number of tool stations: 12 Turret indexing time (1 station): 0.79 seconds Method for mounting tool on turret: Bolt-tightened

BMT60

Rotary tool spindle output: 13 / 10 kW (17.5 / 13.5 HP) (10 min / cont) Rotary tool spindle torque: 86 / 56 Nm (63.5 /

41.4 ft·lbf) (10 min / cont) MASTER turret : Covered by a 5-year warranty service

J-023146* 1 0.00

Turret Y-axis Specification It moves the turret in the Y-axis direction. In combination with the rotary tool spindle and right spindle, it implements process integration for workpieces with complicated shapes. Please refer to the turret interference diagrams for the movable region.

Travel: ± 60 mm (± 2.37 inch.)

Rapid traverse rate: 15 m/min

J-023145 1 0.00

Overhang of O.D. Cutting Rotary Tool: 100 mm (3.94 inch.)

J-023168 1 0.00

Series J1479 05/08/2026 | 11 / 36

Tailstock (Live Center MT5 Specification, Need to select Live center) (Standard) The highly-rigid servomotor-driven digital tailstock specification Taper hole of tailstock spindle : MT5 (live center) Tailstock thrust force : 0.67 to 5.88 kN

(NLX2500/700, NLC2500/700)

Tailstock thrust force : 1.00 to 5.88 kN (NLX2500/700 2nd Gen.)

Tailstock thrust force : 1.07 to 9.80 kN

(NLX2500/1250, NLX3000)

Tailstock thrust force : 1.02 to 8.82 kN (NLX4000) <Highlights>

- Fewer steps requiring operation of the tailstock.

- Variable pressure control using program instructions

- Drastic reduction of setup time

- Improved chip discharge with the base plate equipped with chip flush coolant as standard *The standard live center specification are suitable for light workpiece and high speed rotation. For heavy cutting, the built-in center specification is recommended.

*The live center is not included. Please order it if necessary.

J-016111 1 0.00

Coolant supply / Chip removal

Applicable Coolant Type: Water-Soluble Coolant If the oil-based coolant is used with the water-soluble coolant specification, it may cause poor accuracy, machine troubles or fire. It is necessary to select the oil-based coolant specification for using the oil-based coolant.

J-G00428 1 0.00

Chip Conveyor (Right Discharge, Hinge Type) (/700) Chips are conveyed on the hinged plates and discharged to the right side of the machine. The hinged plate is effective in discharging long chips.

Not suitable for minute powdery chips generated in machining castings and gun metals, etc. as their chips may flow into coolant tank. Suitable for conveying chips such as steels (long, short), aluminum (long), SUS (long, short), brass (long), copper (long), etc..

Chip conveying capacity : short chip : not transportable : long chip : 390 L/h (102.96 gph) *No filtration function for chips.

J-023174 1 9,380.00

Series J1479 05/08/2026 | 12 / 36

High-Pressure Coolant System (800/1,100 W) It improves the chip removing performance in cutting and the tool/workpiece cooling capability.

The pump for supplying coolant to the turret is changed to the high-pressure specification (output: 800/1,100 W (50/60 Hz)).

Max. pump pressure: 0.8 MPa (116 psi)

J-002147 1 355.00

Interface for Super-High-Pressure Coolant System (7 MPa (1,015 psi), Variable Pressure, ChipBLASTER) Interface for mounting the high-pressure coolant system (built-in type). The electrical components and coolant piping are included. The predefined 8 steps of pressure can be selected by the M-code.

Max. discharge pressure: 7 MPa (1,015 psi) *The high pressure coolant unit is not included.

*Please prepare the power source supplied to the high pressure coolant unit separately.

*When using the high-pressure coolant system, the machining accuracy may be influenced by a rise in the coolant temperature. Select the coolant chiller and mist collector to reduce the influence on the machining accuracy.

J-023312 1 4,580.00

Without Coolant chiller (Prepared by customer) Collant chiller is highly recommended, and it is to be prepared by the customer.

The coolant chiller chills coolant in the coolant tank according to a the machine body temperature. Controlling the coolant temperature suppresses the rise in temperature of the workpiece and tools and achieves the stable machining accuracy.

This specification is prepared only with pipe bore size Rc2 on the coolant tank. The coolant chiller, supply pump, hose and electrical components set are not included. Please arrange them separately.

We recommend that the specifications be the same as or higher than the following.

- Cooling capacity: 5220 / 5800W

- Control temperature: ± 0.2 °C

- Tank capacity: 170 L (44.9 gal)

- Synchronous control with machine (The G1/4 hole for temperature sensor are prepared on the bed)

J-026312 1 0.00

Series J1479 05/08/2026 | 13 / 36

Air Blow for Tool Tip Air is blown to the tool tip for removing chips adhering to it. The air blow to the tool tip is effective in removing debris during in-machine measurement or removing chips during dry machining. For this specification, the air blow function is provided at the coolant discharge port on the turret. Air/coolant switching is controlled by the M codes.

J-003273 1 1,530.00

Chip Flushing Coolant for Bed Cover It flushes away chips accumulated on the top face of the bed cover, and the chip conveyor collects them. It is controlled by the different M codes from those for the turret coolant. For the rear discharge specification, the same M codes as that for the chip chute flush are used. The separate coolant tank is not necessary.

J-026805 1 2,000.00

Series J1479 05/08/2026 | 14 / 36

Mist collector zeroFOG #1 (Built-in) The mist collector collects, coolant mist and oily fumes generated during machining using the pre-filter and final filter.

Final filter is toolless and easy to replace.

When the final filter reaches the replacement time, an alert is displayed on the screen.

For FANUC or MITSUBISHI spec., the mist collector can be started/stopped by M-code command or ON/OFF button on the machine operation panel.

For SIEMENS spec., the mist collector is automatically turned on and off in conjunction with the program. (factory default). The operation mode of the mist collector can be changed on the Custom screen. Refer to the operation manual for details on operation modes and how to change them.

When the total operating time of zeroFOG exceeds 15 minutes, the mist suction is automatically stopped temporarily and the primary filter is cleaned by compressed air for 15 seconds to prevent clogging of the primary filter.

Therefore, when using zeroFOG, an additional pneumatic source flow rate of 400 L/min is required only once every 15 minutes for 15 seconds. After the cleaning operation is completed, the mist suction operation starts again.

* When the machine is painted in a specified color, the resin cover around the outer circumference of the zeroFOG is also painted in the same color. Finishing appearance: Orange peel painting.

The replacement intervals for the filters and the cleaning interval for the demister differ depending on the mist concentration inside the machining chamber.

Filter Replacement Interval

- Water-miscible coolant specification: 1000 hours

- Oil-based coolant specification: 300 to 500 hours (with Final Filter Set for High-concentration Fine Mist (#1: 5462094, #2: 5517065)) Demister Replacement Interval: 1000 hours

J-026801 1 8,710.00

Double Slide Seals Supporting the X, Y and Z axes.

J-023169 1 0.00

Series J1479 05/08/2026 | 15 / 36

Coolant Level sensor (upper limit, lower limit forecast and lower limit detection) It monitors the fluid level in the coolant tank.

(Detecting the upper and lower limits and and lower limit forecast)

Upper limit・lower limit：Alarm

Lower limit forecast：Display warning message

Only for MAPPS spec.

The alarm processing method when the lower limit is detected by the Coolant Level sensor can be changed on the screen. The details that can be changed are as follows.

<Alarm processing method when the lower limit is detected>

- Feed hold and Spindle stop

- Start lock In addition, when “Feed hold and Spindle stop” is selected as the alarm processing method, the timing can be changed. The details that can be changed are as follows.

<Timing of feed hold and spindle stop>

- Immediate stop

- Non-cutting stop In addition, when “Non-cutting stop” is selected for the timing of feed hold and spindle stop, the allowable time until the non-cutting stop can be set.

J-022043 1 0.00

Measuring / Monitoring

Manual In-machine Tool Presetter (Swing type)

It simplifies the complicated setup work at the tool change. The position of the tool nose is measured precisely by just bringing the tool nose into contact with the sensor, and the measured value is fed back to NC. The Tool Presetter can be tilted to the chuck cover side when not used.

J-017110 1 0.00

Series J1479 05/08/2026 | 16 / 36

Automation

Signal Lamp 4 Colors (Red, Yellow, Green, Blue)

The machine status is indicated by the LED color.

It is mounted at top front of machine so that it is visible from a distance. The power-saving, maintenance-free LEDs with a viewing angle of 360 degree is adopted. The color specification can be selected from the following two types:

<Type 1>

- Red: Various alarms

- Yellow: Program end (M02/M30)

- Green: Automatic mode operation <Type 2 (Standard)>

- Red: Immediate stop alarm

- Yellow: The cycle start prohibited

- Green: Automatic mode operation

- Blue: Operation requests such as program end (M2/M30) or low coolant warning; Operation Mode 2 *Buzzer function is not included. Please select the "Signal Lamp Buzzer" specification separately.

J-004166 1 495.00

Left Workpiece unloader (left side take-out, receiver type) The workpiece is taken to the left side of the machine by the bucket. The workpiece is also discharged to the left side of the machine by the conveyor located in front of the left spindle. These functions enable unmanned operation. Please let us know regarding chip removal methods. For example, the through spindle coolant system when you select the collet chuck specifications and so on.

*The workpiece ejector in right spindle and air blow in the spindle are not included. Please select as necessary.

Applicable workpiece diameter: up to Φ105 mm Max. workpiece length: 200 mm Max. weight capacity: 4 kg

J-023172 1 16,850.00

Series J1479 05/08/2026 | 17 / 36

EtherNet/IP I/F I/F for exchanging control signals between the machine and peripheral equipment using the EtherNet/IP communication protocol. It is necessary for connecting the peripheral equipment that supports EtherNet/IP. The wiring is saved compared to normal hard wiring communication as the control signals are exchanged via the EtherNet communication. This specification includes I/F for receiving and executing emergency stop signals transmitted from peripheral equipment via separate non-LAN cable.

*The LAN cable between the machine and peripheral equipment is not included.

*When the machine is shipped, the circuit is short-circuited if there is no external device connected.

Please make sure to remove the jumper wire when installing machine at the customer's factory.

J-015384 1 850.00

Series J1479 05/08/2026 | 18 / 36

Interface for bar feeder (EtherNet/IP Interface, TYPE5) (Connector type) The connection I/F using EtherNet/IP, for the bar feeder which automatically supplies bar stock to improve the productivity. Bar feeder body is not included in this specification.

(Caution) It is necessary to arrange the guide bush or guide pipe by separate quotation.

*Because the guide bush is solid, please machining it according to the inner diameter required by the customer.

*When arranging the guide pipe, specify the pipe inner diameter in advance.

*In automated machine operations using the bar feeder, the machine door or shutter is not opened or closed for long hours.

As a result, a temperature inside the machine can rise, affecting machining accuracy.

So the mist collector is recommended that can prevent the temperature from rising.

*When using a bar feeder that cannot discharge the remaining material inside the bar feeder equipment, please arrange a workpiece unloader separately because it is necessary to discharge the remaining material into the machine.

(Although DMGMORI do not recommend it, when discharging the remaining material by dropping it onto chip conveyor without a workpiece unloader, please cut down the remaining material as much as possible before dropping it onto chip conveyor.

(If the remaining material is too long, it may get caught in chip conveyor and cause chip conveyor to break prematurely.)

*Please remove the short-circuit connector when installing machine at the customer's factory.

<Connectors prepared by DMG MORI>

HARTING CONNECTOR:

■POWER and SAFETY signal 0933 024 2716 0930 024 0251 0930 000 9901

J-056318 1 1,550.00

Voltage of Bar feeder Interface : 400 V

J-056321 1 0.00

Series J1479 05/08/2026 | 19 / 36

General Options

Ball Screw Core Cooling for X,Y,Z-axis

The axis core cooling is adopted inside the ball screws against heat by axis feed, and the manifold for oil branching is attached (the X-axis only). The coolant from the oil controller flows into the ball screw through the manifold and returns to the oil controller through the manifold again. The amount of heat generated on the ball screw is reduced by passing the coolant inside the ball screw.

J-023199 1 0.00

Multi Dry Filter It removes moisture and oil content from the compressed air supplied from the compressor. It prevents the pneumatic device malfunctions caused by the moisture and oil in the air. The auto-drain and the filter (IN / OUT) are equipped with gages respectively.

- Filter Unit: T105A-1000MSP (Maeda Shell) *This specification is for the "main air supply port" only.

If a multi-dry filter is also required for the "sub-air supply port" of a model with two supply ports, an additional quote is required.

J-002210 1 635.00

Manual Pulse Generator (Separate Type) Separate type hand-held handle switch improves the operability at the setup. The separate type handle switch is connected to the operation panel with a curled cord. It can be attached to a desired place on the machine using the magnet on the back side. The separate type handle switch equipped with the high-intensity white LED as standard can also be used as a hand-held light to illuminate the workpiece machining face or the dark area where the machine light does not reach.

*There is no Manual Pulse Generator on the operation panel.

J-026800 1 2,210.00

Voltage of Customer Factory 400 V This machine is shipped with voltage set to 400 V specification.

Direct machine connection admissible for TN-S system only, then transformer is not needed.

When use TT or IT system, transformer is necessary for conversion.

(Caution) If the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage, frequency and power supply system of the customer's factory.

J-014887 1 0.00

Series J1479 05/08/2026 | 20 / 36

Frequency 60 Hz This machine is shipped with frequency set to 60 Hz specification.

(Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and frequency of the customer's factory.

J-G00961 1 0.00

Setting Unit, Inch The unit to be used for the screen display and program commands is set to "inch".

Turning: "Inch" specification for the turret

J-004472 1 0.00

Technology Cycle

Alternating Speed

It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen.

*Regenerative chatter is created by excitation resulting from the fluctuation in chip thickness. In general, the spindle speed needs to be adjusted as a countermeasure for keeping the chip thickness constant.

This function is not available when left and right spindles are synchronized(M34 or M35 command)

J-015571 1 840.00

Keyway broaching This function enables to program for keyway grooving with simple programming guidance.

Regarding machining possibility including machining accuracy, please contact DMG MORI sales staff *Additional necessary NC option : none

J-012929 1 1,020.00

Series J1479 05/08/2026 | 21 / 36

Options for Control

High-speed Canned Cycle The screen guidance induces input of the canned cycle arguments. The high-speed cutting can be specified in one program line.

- The machining time is reduced by the high-speed machining.

- The cycle that simplifies complicated programming of high speed machining programming are newly added.

- The programming time is shortened.

- The optimum tool paths are automatically created for the high-speed machining.

- The shapes which require perplexing programs are supported.

- The manual-less screen guidance method is adopted.

The number of pattern: 21 patterns The number of patterns for programming from the interactive machining menu: 15 patterns

J-008657 1 2,650.00

Addition of Optional Block Skip (Soft Key Type 2- 9) 8 optional block skip functions are added. The switches for enabling/disabling them is added on the operation panel.

(How to Use) By programming a slash "/" and the number (/n (n=2 to 9) ) following it at the beginning of a block and turning on the optional block skip switch with the same number as programmed on the screen or machine operation panel, the information of the block is ignored in the DNC or memory operation.

Turning off the optional block skip switch n enables the information of the block with n.

Namely, the block including /n can be skipped by the operator's selection.

J-008244 1 835.00

X-axis Direction, JIS/ISO-compliant The X-axis movement direction is compliant with the JIS/ISO standard.

J-G00618 1 0.00

Screen Text Language

Screen display English

Language on MAPPS Screen: English Language on MAPPS Warning Screen: English Language on NC Screen: English Language on PC Screen: English

J-000080 1 0.00

Price machine and options 279,770.00

Services USD USD

Series J1479 05/08/2026 | 22 / 36

Special constructions services

DMG MORI Precision Protection Program

SK001 1

15,280.00

LOGISTICS: JK Hackl, Machine Freight-Out Los Angeles, CA to Chicago, IL

SK002 1

7,810.00

Sales company services

SV1: Standard Machine Installation Z-COST01 1 0.00 DMG MORI Connect

A 2-year subscription of DMG MORI connectivity software:

+ Messenger Cloud - Machine monitoring through web application + NETservice 4.0 - Remote service by DMG MORI Hotline via CELOS APP *NETservice is only available on machines with IoTconnector

Z-COST06 1 1,000.00

EG1: Standard Machine Training Z-COST07 1 0.00

Price services 24,090.00

Price machine and options 279,770.00 Discount machine and options -25,179.00 Price services 24,090.00

Total price 278,681.00

Series J1479 05/08/2026 | 23 / 36

Attachment

Technical Description

J-A02175

Basic machine NLX 2500 | 700 The specifications below apply to a basic machine without additional options. Specifications in square brackets [ ] are values or features for a machine with additional options.

Capacity

Swing over bed mm (in.) 945 (37.2)

<Interfere with front cover: 660 (26.0)>

Swing over cross slide mm (in.) 760 (29.9)

Maximum turning diameter:

- For 35 mm (1.4in.) overhang of O.D. cutting tool mm (in.) 366 (14.4)

- For 40 mm (1.5in.) overhang of O.D. cutting tool mm (in.) 356 (14.0)

- 20-station turret mm (in.) [278 (10.9)] Standard turning diameter:

- 12-station turret for 35 mm (1.4 in.) overhang of O.D. cutting tool mm (in.) 271 (10.7)

- 12-station turret for 40 mm (1.5 in.) overhang of O.D. cutting tool mm (in.) 275 (10.8)

- 10-station turret for 35 mm (1.4 in.) overhang of O.D. cutting tool mm (in.) [330 (13.0)]

- 10-station turret <For 40 mm (1.5 in.) overhang of O.D. cutting tool> mm (in.) [335 (13.2)]

- 20-station turret mm (in.) [192 (7.6)]

Maximum turning length <Tailstock spec.> mm (in.) 658.8 (26.2) Maximum turning length <Right spindle Through-spindle hole diameter 45 mm (1.8 in.) spec.> mm (in.) [708.6 (27.9)]

Maximum turning length <Right spindle Through-spindle hole diameter 83 mm

(3.3 in.) spec.> mm (in.) [686.6 (27.0)]

Maximum turning length <Right spindle Through-spindle hole diameter 115 mm (4.5 in.) spec.> mm (in.) [666.6 (26.2)]

Bar work capacity:

- Standard mm (in.) 105 (4.1)

Travel

X-axis mm (in.) 260 (10.2) Z-axis mm (in.) 795 (31.3) Y-axis mm (in.) [±60 (±2.3)]

Right Spindle <Z3-axis> mm (in.) [734 (28.9)]

Series J1479 05/08/2026 | 24 / 36

Left Spindle

Maximum spindle speed

- Standard min-1 5,000

- High output & High torque min-1 [3,000]

Type of spindle nose JIS A2-8

Through-spindle hole diameter mm (in.) 115 (4.5) Spindle bearing inner diameter mm (in.) 160 (6.2)

Minimum spindle indexing increment deg. 0.001

Right Spindle (Option)

Maximum spindle speed:

- Through-spindle hole diameter 45 mm (1.7 in.) min-1 [7,000]

- Through-spindle hole diameter 83 mm (3.2 in.) min-1 [5,000]

- Through-spindle hole diameter 115 mm (4.5 in.) min-1 [5,000]

Type of spindle nose:

- Through-spindle hole diameter 45 mm (1.7 in.) [JIS A2-5]

- Through-spindle hole diameter 83 mm (3.2 in.) [JIS No.5 straight]

- Through-spindle hole diameter 115 mm (4.5 in.) [JIS No.8 straight]

Spindle bearing inner diameter:

- Through-spindle hole diameter 45 mm (1.7 in.) mm (in.) [100 (3.9)]

- Through-spindle hole diameter 83 mm (3.2 in.) mm (in.) [130 (5.1)]

- Through-spindle hole diameter 115 mm (4.5 in.) mm (in.) [160 (6.2)] Minimum spindle indexing increment deg. [0.001]

Turret

Number of tool stations tools 10 [12] [20] Shank height for square tool:

- Standard mm (in.) 25 (1.0)

- 20-station Turret mm (in.) [20 (0.8)] Diameter of boring bar shank part:

- Standard mm (in.) 50 (2.0) <Right Spindle side: 32 (1.3)>

- Double boring bar holder mm (in.) [32 (1.3)]

- 20-station Turret mm (in.) [32 (1.3)] Turret Indexing time (Tool to Tool) sec 0.79 Maximum rotary tool spindle speed min-1 12,000

Series J1479 05/08/2026 | 25 / 36

Feedrate

Rapid traverse rate:

- X-axis mm/min

(ipm) 30,000 (1,181.1)

- Z-axis mm/min (ipm)

30,000 (1,181.1)

- Tailstock mm/min

(ipm)

Retract: 20,000 (787.4)

Extend: 7,000 (275.6)

- Y-axis mm/min

(ipm) 15,000 (585)

- Z3-axis mm/min (ipm)

[30,000 (1,181.1)]

Tailstock travel mm (in.) 734 (28.9) Taper hole of tailstock spindle:

- Live center MT5

- Built-in center [MT4], [MT3]

Motors

Left Spindle drive motor:

- Standard <15%ED / cont> kW (HP) 30 / 22

(40 / 29.3)

- High output & High torque <10%ED / cont> kW (HP) [36 / 25 (48 / 33.3)] Right Spindle drive motor:

- Through-spindle hole diameter 45 mm (1.8 in.)

<10%ED / cont> kW (HP) [11 / 7.5 (15 / 10)]

- Through-spindle hole diameter 83 mm (3.2 in.)

<40%ED / cont> kW (HP) [23 / 20 (30.6 / 26.6)]

- Through-spindle hole diameter 115 mm (4.5 in.)

<15%ED / cont> kW (HP) [32 / 25 (42.6 / 33.3)]

Rotary tool spindle drive motor:

- 10, 12-station bolt-tightened turret specification <10 min / cont> kW (HP) 13 / 10 (17.4 / 13.4)

- High torque 10,12-station bolt-tightened turret specification <10 min / cont> kW (HP) [15 / 15 (20.1 / 20.1)]

- 20-station bolt-tightened turret specification <10 min / cont> kW (HP) [13 / 10 (17.4 / 13.4)]

- 12-station VDI quick-change turret (Sauter Trifix) specification <25%ED / cont> kW (HP) [15 / 12 (20.1 / 16.1)]

Feed motor:

- X-axis kW (HP) 4.3 (5.8)

- Z-axis kW (HP) 4.6 (6.2)

- Tailstock kW (HP) 4.6 (6.2)

- Y-axis kW (HP) 4.3 (5.8)

- Z3-axis kW (HP) [4.6 (6.2)]

Series J1479 05/08/2026 | 26 / 36

Tank Capacity

Coolant tank capacity L (gal.) 687 (151.1)

Machine Size

Machine height mm (in.) 2,242 (88.3)

Floor space <width x depth>:

- Standard mm (in.) 4,249 x 2,109

(167.3 x 83.0)

- Right disposal conveyor mm (in.) [4,249 x 2,109

(167.3 x 83.0)] Mass of machine

- Y-Axis specification kg (lb.) 8,200 (18,078)

- Y-Axis + Right Spindle specification kg (lb.) [8,400 (18,519)]

Series J1479 05/08/2026 | 27 / 36

J-014902

NC Unit F31iB5 plus

Controlled axis

Controlled axis X, Z, Y, C, Z3, T Simultaneously controllable axes X, Z, Y, C Least input increment X, Z, Y, Z3 : 0.001 mm (0.0001 in.)

C：0.0001°

Max. command value ±99,999.999 mm (±9,999.9999 in.)

Inch/metric conversion G20/G21 Machine lock Stored stroke check 1

Chamfering ON/OFF

Backlash compensation ±9999 pulses Rapid traverse/cutting feed backlash compensation Stored pitch error compensation

Operation

Dry run Single block Jog feed 0 - 5,000 mm/min <20 steps> Manual return to reference position Manual handle feed Manual pulse generator 1 unit x 1, x 10, x 50, x 100 (Per pulse)

Interpolation functions

Nano interpolation

Positioning G00 “Linear interpolation type positioning is possible”

Exact stop mode G61 Polar coordinate interpolation G12.1, G13.1 (G112, G113) Cylindrical interpolation G7.1 (G107) Helical interpolation Circular interpolation + Linear interpolation <max. 2 axes>

Thread cutting/synchronous feed Multiple thread cutting Retract during thread cutting cycle Continuous thread cutting Variable lead thread cutting G34 Return to reference position G28 Reference position return check G27 Return to second reference position G30 3rd/4th reference position return

Feed functions

Series J1479 05/08/2026 | 28 / 36

Rapid traverse override F0 - 100% (20 steps)

Feed per minute Feed per revolution Tangential speed constant control Feedrate override 0-200% <10% increments> Feedrate override cancel M48, M49

Series J1479 05/08/2026 | 29 / 36

Program input

Optional block skip 1 block Program name 32 arbitrary characters Sequence number 8-digit N code Absolute / incremental programming X (U), Z (W), C (H), Y (V), Z3 Decimal point programming/Electronic calculator type decimal point programming

Electrical calculator type decimal point programming is changeable using parameter.

Diameter / Radius programming (X-axis) Radius programming is possible with parameters Dynamic diameter / Radius switching Plane selection G17, G18, G19 Rotary axis designation Rotary axis roll-over

Coordinate system setting G50 Work coordinate system G52 - G59 Chamfering/Corner R Programmable data input G10 Sub-program call Up to 10 nestings Custom macro common variables <in total> 600 sets

<#100 - #199, #500 - #999> Single canned cycle Multiple canned cycle

Multiple canned cycle II Pocket profile, zigzag thread cutting Hole machining canned cycle F15 format

Miscellaneous function/spindle speed function

Miscellaneous function M4-digit Auxiliary function lock Multiple miscellaneous function commands 3 commands <Standard Only for

Limited M Codes> Spindle speed function S5-digit Constant surface speed control Spindle override 50-150% <10% increments> Spindle orientation <Left Spindle> Multiple-spindle control

Tool function/Tool offset function

Tool function T4-digit

Number of tool offsets 200 sets Y-axis offset Tool nose radius compensation G40 – G42 Corner circular interpolation G39 Tool geometry offset/Tool wear offset Tool offset measurement direct input Tool offset measurement direct input B In-machine presetter

Series J1479 05/08/2026 | 30 / 36

Editing function

Part program storage length 4Mbyte Number of stored programs 1,000 programs Program storage area 6 GB Program protect Background editing

Setting and display

Status display Clock function Actual position display

Program display Program name 32 arbitrary characters

Parameter setting display Alarm display

Alarm history display

Operator message history display

Operation history display

Running time display/No. of parts display

Actual feedrate display

Display of actual spindle speed and T code

Operation panel: Display section 21.3-inch TFT color LCD

Data input/output

I/O interface USB, Network drive

Series J1479 05/08/2026 | 31 / 36

Standard Equipment

Spindle specification

- Spindle drive motor is 32 / 22 / 22 kW (42.9 / 29.5 / 29.5 HP) <15% ED / 40% ED / cont.> and max.

spindle speed is 5,000 min-1.

- Oil chiller Spindle cooling specifications

- Tailstock spindle - Live center specifications: MT5 <without center>

Turret

- Turret tool attachment method is 12-station bolt-tightened type and turret indexing time is 0.79 sec a station.

- Rotary tool spindle drive motor is 13 / 10 kW (17.4 / 13.4 HP) <10 min / cont.> and max. rotary tool spindle speed is 12,000 min-1.

- Overhang of O.D. cutting rotary tool is 100 mm (3.9 in.).

Coolant

- Coolant system <350 W, 50 Hz/550 W, 60 Hz>

- Coolant Float Switch (upper limit, lower limit forecast and lower limit detection)

Measurement

- Manual in-machine tool presetter <left spindle>, Swing type

Safety features

- Full cover

- Impact resistant viewing window

- Door interlock system <incl. mechanical lock>

- Footswitch with lock device

- Low hydraulic pressure detecting switch

Others

- Automatic power-off system

- Chuck cylinder stroke check (linear position monitoring)

- Chuck foot switch <double> <controlled by pedal>

- LED work light

- Air purge <spindle>

- Hand tools

Series J1479 05/08/2026 | 32 / 36

J-023146

12-Station Bolt-Tightened Turret, Rotary tool spindle 13 / 10 kW, 86 / 56 Nm, 12,000 min-1 (Standard)

The number of standard sets as follows. Please refer to the tooling system diagram for details.

*[ ] inch specification

(Tailstock specification)

Coolant nozzle pipe P40145 2

Boring bar sleeve T20094 (φ20) [T20095 (φ3/4")]

Boring bar sleeve T20096 (φ25) [T20097 (φ1")]

Boring bar sleeve T20098 (φ32) [T20099 (φ1 1/4")]

O.D. cutting tool holder T00186 (□25) [T00202 (□1")]

O.D. cutting tool holder (Extension) T00385 (□25) [T00386 (□1")]

Boring bar holder T10097 (φ40) [T10101 (φ1 1/2")]

(Right Spindle specification)

Coolant nozzle pipe P40145 2

Boring bar sleeve T20094 (φ20) [T20095 (φ3/4")]

Boring bar sleeve T20096 (φ25) [T20097(φ1")]

Boring bar sleeve T20098 (φ32) [T20099 (φ1 1/4")]

Boring bar sleeve T20122 (φ25) [T20123 (φ1")]

O.D. cutting dual-tool holder T00184 (□25) [T00199 (□1")]

O.D. cutting tool holder T00186 (□25)

[T00202 (□1")]

Cut-off tool holder T00197 (□25) [5210822 (□1")]

O.D. cutting tool holder (Extension) T00385 (□25) [T00386 (□1")]

Boring bar holder T10096 (φ32) [T10100 (φ1 1/4")]

Boring bar holder T10097 (φ40) [T10101 (φ1 1/2")]

Series J1479 05/08/2026 | 33 / 36

DMG MORI USA INC.

GENERAL TERMS & CONDITIONS

These terms and conditions of sale (“Terms”) are the only terms which govern the sale of goods and/or services (“Goods”) by DMG MORI USA, Inc., or its affiliates (collectively “DMG MORI”) to Buyer and DMG MORI will only sell the Goods subject to these Terms. All quotations, proposals, all Buyer’s purchase orders, all service, and all confirmations or acknowledgments of Buyer’s purchase orders by DMG MORI are subject to these Terms. These Terms prevail over any of Buyer’s general terms and conditions of purchase regardless whether or when Buyer has submitted its purchase order or such terms. Buyer’s written acknowledgment or payment of a deposit for the Goods shall be construed as Buyer’s acceptance of these Terms. No additional or other terms will be binding on DMG

MORI unless accepted in writing signed by a duly authorized representative of DMG MORI. Notwithstanding anything herein to the contrary, if a written contract signed by both parties is in existence covering the sale of the Goods covered hereby, the terms and conditions of said contract shall prevail to the extent they are inconsistent with these Terms. The “Buyer” herein refers to the customer of

DMG MORI as listed on the purchase or sales order regardless of form (“Order”).

PRICES. Unless otherwise noted, all prices quoted are subject to change without notice. Prices do not include sales, use, excise, VAT, GST, property or similar taxes arising out of or relating to the sale or use of the Goods. Buyer shall indemnify, defend and hold DMG MORI harmless from and against the imposition and payment of such taxes, whether or not they are stated in any invoice for the

Goods. DMG MORI, at its option, may at any time separately bill Buyer and Buyer shall pay for any taxes not included in DMG MORI’s invoice. Any prices provided in a DMG MORI quotation or confirmed purchase order are based on the duties and tariffs in effect as of the date of issuance of the quote and are subjec t to change as a result of any changes in the applicable duties and / or tariffs arising after the date of the quote.

PAYMENT TERMS. Unless otherwise mutually agreed to by the parties in writing, Buyer shall pay to DMG MORI such amounts according to the following payment schedule: 30% down-payment due at the time of signed Order; 60% due upon on the earlier of (i) Shipment or (ii) originally agreed shipment date if the shipment of the machine is delayed for reasons not attributable to DMG MORI; 10% due earlier of (i) installation date, (ii) 30 days after Shipment or (iii) immediately after the machine is first used for commercial production. Shipment shall mean when DMG MORI delivers the Goods to a carrier for shipment to Buyer. DMG MORI reserves the right to hold installation service until DMG MORI receives payment for at least 90% of the total Order Price. If acceptance of the Goods by

Buyer (which shall not be unreasonably withheld) after Shipment by DMG MORI is delayed more than thirty (30) days from the date of delivery of the Goods because of conditions other than the Goods or services provided by DMG MORI, including but not limited to delay in the provision of goods or services by Buyer or other suppliers, Buyer will pay to DMG MORI as interest 0.4% of the amount due and payable per week until acceptance by Buyer. Receipt and subsequent bank deposit of a down payment shall not be construed as acceptance of the purchase order until said order is accepted in writing by DMG MORI. In the event of legal action to enforce these Terms, Buyer shall reimburse DMG MORI for its reasonable costs and attorney’s fees. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit to promptly meet the payment terms of the order. Acceptance and payment by Buyer with respect to the Goods shipped by DMG MORI shall not be delayed because of any delay in shipment by DMG MORI of accessory or ancillary equipment not essential to the operation of the Goods already shipped; in such event, the payment terms set forth in this paragraph shall be applicable to the Goods shipped as of the date of Shipment and to subsequent Shipments of Goods as they occur.

DMQP, PARTS, AND SERVICE PAYMENT TERMS, CANCELLATIONS AND RETURNS. Excluding items or service included in machine Orders, Buyer shall pay all other DMG MORI invoices (30) days from invoice date. Late payment shall bear interest in the amount of 0.4% of the amount due per week. DMG MORI reserves the right to cancel and to refuse to complete Buyer's purchases if, in DMG MORI's opinion, Buyer has not established credit or promptly meet the payment terms. Requests for cancellations must be made within 24 hours of the order. Requests for returns must be made within 30 days of Shipment. All returned parts must be authorized in advance, must be in original condit ion and the return packaging must contain the return authorization number and pass DMG

MORI inspection.

DELIVERY. DMG MORI will exert its best efforts to cause the Goods to be shipped in accordance with its quotations and these Terms. However, all dates stated by DMG MORI are approximate dates only, and are estimated in good faith to the best of DMG MORI’s ability, commensurate with foreseeable scheduling and subject to availability of product and transit. DMG MORI shall not be liable for any loss or damage whatsoever, including loss of income and/or profits, incidental, special or consequential damages resulting from DMG MORI’s delayed shipment of the Goods for any reason whatsoever. Any claims for shortages or claims that the Goods shipped is other than that which was ordered or claims for damages prior to delivery to Buyer or Buyer's agent must be made in writ ing to DMG MORI within fif teen (15) days after the arrival of the Goods at Buyer's plant or place of business.

SHIPPING TERMS. Unless otherwise mutually agreed…